20 results (0,15479 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Apollo End-to-End Optical Beam Detector 29600-929

Apollo End-to-End Optical Beam Detector 29600-929

Apollo End-to-End Optical Beam Detector 29600-929The Conventional End-to-End Optical Beam Detector has been designed using the latest optical technology incorporating modern industrial electronic and software techniques. This detector offers cost effective protection of large open area spaces with high ceilings. It is also very suited to applications where access to ceiling mounted smoke detectors presents practical difficulties. The Conventional End-to-End Optical Beam Detector is ideal for applications where line of sight for the IR infra-red detection path is narrow and where the building structure uses reflective surfaces. It has also been designed to be aesthetically pleasing and thus can equally suit modern architectural buildings as well as heritage sites particularly where ornate ceilings exist.Key FeaturesFull icon-based easy-to-use LCD display on the low level controller for ease of commissioning testing and maintenanceAesthetically pleasing to suit modern architectural buildings and heritage sitesRange 5 to 120 metresLaser assisted alignment combined with easy to use alignment LEDs enables installation by one operatorSeparate FireFault Relaysper DetectorSelectable sensitivitythreshold levelsAutomatic Gain control AGC for drift compensationAdjustment bracket offers up to 180 degrees movement in both planes and a full 360 degree rotation. It also fits 29600-524 and 29600-525 heads.

GBP 897.00
1

Apollo Series 65 End-of-Line Relay Base 12V - 45681-247APO

Apollo Series 65 End-of-Line Relay Base 12V - 45681-247APO

Apollo Series 65 End-of-Line Relay Base 12V - 45681-247OperationSeries 65 Relay Bases are primarily intended for use with control units using 4-wire detector supply and alarm initiating circuits. Where local codes allow they may also be used in 2 and 4-wire circuits to provide volt-free control signals to an auxiliary system such as an automatic door closer. They are not suitable for use in systems where it is specified or required that operation of the auxiliary system shall be fail-safe and must not be used with any other type of detector.Options45681-247 for circuits having a supply voltage between 9- and 18-volts DC and 45681-248 for circuits having a supply voltage between 16- and 33-volts DC.Product InformationThe Series 65 End-of-Line EOL Relay Base is intended for use with four-wire circuits and features two sets of changeover contacts and a power supervision relay.Key FeaturesDetector locking mechanismOne way fitEasy to wireContains an earth connector

GBP 22.14
1

Apollo Series 65 End-of-Line Relay Base - 24V 45681-248APO

Apollo Series 65 End-of-Line Relay Base - 24V 45681-248APO

Apollo Series 65 End-of-Line Relay Base 24V - 45681-248OperationSeries 65 Relay Bases are primarily intended for use with control units using 4-wire detector supply and alarm initiating circuits. Where local codes allow they may also be used in 2 and 4-wire circuits to provide volt-free control signals to an auxiliary system such as an automatic door closer. They are not suitable for use in systems where it is specified or required that operation of the auxiliary system shall be fail-safe and must not be used with any other type of detector.Options45681-247 for circuits having a supply voltage between 9- and 18-volts DC and 45681-248 for circuits having a supply voltage between 16 and 33 volts DC.Product InformationThe Series 65 End-of-Line EOL Relay Base is intended for use with four-wire circuits and features two sets of changeover contacts and a power supervision relay.Key FeaturesDetector locking mechanismOne way fitEasy to wireContains an earth connector

GBP 22.14
1

Apollo Marine DIN-Rail Zone Monitor 55000-773MAR

Apollo Marine DIN-Rail Zone Monitor 55000-773MAR

Apollo Marine DIN-Rail Zone Monitor 55000-773MARThe Marine DINRail Zone Monitor powers and controls the operation of a zone of up to 20 conventional fire detectors from a loop of XP95 addressable detectors and ancillary devices.OperationThis unit needs to be installed in a suitable enclosure and secured using end stops part no 27447-528 or equivalent. The Marine DINRail zone monitor is factory pre-set to return an analogue value of 16 when all detectors on the zone are in the quiescent state and 64 when a detector changes to the alarm state.The unit latches in the alarm state. A 5.1K end-of-line resistor is used to monitor cables for open and short-circuit faults. Alternatively an active end-of-line monitor may be used in conjunction with diode bases and a capacitor of up to 50F fitted at the unit wiring terminals. In either case an analogue value of 4 is transmitted during open or short-circuit faults.The Marine DINRail zone monitor is fitted with a bi-directional short-circuit isolator and will be unaffected by loop short-circuits on either loop input or output.Key FeaturesLoop-poweredVisible short-circuitLED Built in isolator

GBP 112.91
1

Apollo XP95 DIN-RAIL Zone Monitor with Isolator - 55000-812APO

Apollo XP95 DIN-RAIL Zone Monitor with Isolator - 55000-812APO

Apollo XP95 DIN-RAIL Zone Monitor with Isolator - 55000-812APOThe DIN-Rail Zone Monitor with Isolator powers and controls a zone of up to 20 Apollo Series 65 or Orbis fire detectors in a Discovery or XP95 loop.OperationThe DINRail Zone Monitor is factory preset to return an analogue value of 16 when all detectors on the zone are in the quiescent state and 64 when a detector changes to the alarm state. The unit latches in the alarm state. A 5.1k end-of-line resistor is used to monitor cables for open and short-circuit faults. Alternatively an active end-of-line monitor may be used in conjunction with diode bases and a capacitor of up to 50uF fitted at the unit wiring terminals. In either case an analogue value of 4 is transmitted during open or short-circuit faults.The DINRail Zone Monitor is fitted with a bi-directional short-circuit isolator and will be unaffected by loop short-circuits on either loop input or output. For IS applications use DIN-Rail IS Zone Monitor part number 55000-798.Key FeaturesLoop-poweredVisible short-circuit and alarmLEDs Built-in Isolator

GBP 81.07
1

Apollo Marine DIN-Rail Sounder Controller 8 Amperes 55000-181MAR

Apollo Marine DIN-Rail Sounder Controller 8 Amperes 55000-181MAR

Apollo Marine DIN-Rail Sounder Controller 8 Amperes 55000-181MARThe Marine DIN-Rail Sounder Controller 8 Amperes is used to control the operation of a zone of externally powered sounders and report their status to the fire control panel.The device is loop powered and controlled by the fire control panel using the output bits in the communication protocol. The unit is polarity sensitive. This unit needs to be installed in a suitable enclosure Part No. 29600-239240 or equivalent and secured using the end stops.Key FeaturesEnables sounders to be operated continuously or to be pulsed one second on one second offMay be synchronised when in pulsed operationExternal supply monitoringWill accept a load of 8 Amperes

GBP 119.31
1

Apollo Dual Switch Manual Call Point SA5900-011APO

Apollo Dual Switch Manual Call Point SA5900-011APO

Apollo Dual Switch Manual Call Point SA5900-011APOThe Apollo Dual Switch Manual Call Point provides volt free double pole change-over contacts suitable for normally open or normally closed multiple switching from a single activation point. A device is activated by pressing the resettable element. An activation status is indicated through the rotation of the resettable element displaying yellow and black indication bars. The manual call point can be easily reset from the front using the supplied reset key.Key FeaturesResettable operating elementEasy access front reset mechanismErgonomic reset keyDouble pole change-over contactsSuitable for semi flush or surface mountingOptional transparent hinged cover

GBP 16.68
1

Apollo Marine DIN-Rail Switch Monitor Plus 55000-772MAR

Apollo Marine DIN-Rail Switch Monitor Plus 55000-772MAR

Apollo Marine DIN-Rail Switch Monitor Plus 55000-772MARThe Marine DIN-Rail Switch Monitor Plus is designed to monitor the state of one or more single pole volt free contacts connected on a single pair of cables and to report the status to Apollo compatible analogue control equipment. In addition it incorporates additional circuitry to monitor flow switches and provide a time delay in so doing. It also contains circuitry which can be used to reset a beam detector.OperationThe Marine DINRail switch monitor provides four input states to the control equipment normal fault pre-alarm and alarm. The unit has a red LED to indicate an alarm and a yellow LED to indicate a fault condition. The Marine DINRail switch monitor is loop-powered and operates at 1728V DC with protocol voltage pulses of 59V. The unit is designed to accept a maximum line resistance of 50ohm. The end-of-line resistor required is 20k ohm.

GBP 75.87
1

Apollo Cat O. XP95 VAD Base with Isolator 45681-709APO

Apollo Cat O. XP95 VAD Base with Isolator 45681-709APO

Apollo Cat O. XP95 VAD Base with Isolator 45681-709APOThe XP95 range of analogue addressable fire detectors uses tried and trusted technology to give the best performance and has unique features that benefit the installer and the end user. It is suitable for medium-to-large applications with simple installation requirements. As it operates using digital communication XP95 has a high immunity from corruption and is therefore often preferred in a large system where life safety is critical. XP95 products are frequently used in commercial industrial financial government ITtelecoms and healthcare applications.The XP95 VAD Base is a loop-powered VAD combined with a standard intelligent mounting base. It is used to signal a fire alarm in enclosed areas. The VAD base can be used with either a detector fitted or with a cap as a stand-alone device.Key FeaturesEN54-23 approvedFlash rate of 0.5HzSynchronisation of VAD flashIndividual and group addressingUnique VAD self-testLoop-poweredBuilt in isolator

GBP 58.67
1

Apollo SA4700-100APO Intelligent Switch Monitor

Apollo SA4700-100APO Intelligent Switch Monitor

Apollo SA4700-100APO Intelligent Switch MonitorThe Intelligent Switch Monitor is designed to monitor thestate of one or more single pole volt-free contacts connectedon a single pair of cables to report the status. It has a selectable status reporting delay making it suitable for monitoring flowswitches. Compatible with XP95 Discovery and CoreProtocol digital communication protocols.Mechanical ConstructionThe Intelligent Switch Monitor is available in the new faceplate style enclosure. This can be mounted with the supplied back-box for surface mounting or flush mounted using a UK double gang flush mounting back-box of minimum depth 30mm.Key FeaturesImproved design for ease of wiring meaning faster installationContains controllable isolatorAddress range 1 - 254Five pre-configured modes including compatibility mode from XP95Discovery to CoreProtocol systemsPriority mode for fast responseConfigurable input stylesEarth fault monitoring

GBP 46.70
1

Apollo SA4700-102APO Intelligent Input Output Unit

Apollo SA4700-102APO Intelligent Input Output Unit

Apollo SA4700-102APO Intelligent Input Output UnitThe Intelligent InputOutput Unit provides supervision of oneor more normally open contacts connected to a single pair ofcables and a set of changeover relay output contacts. Compatible with XP95 Discovery and CoreProtocol digital communication protocols.Mechanical ConstructionThe Intelligent InputOutput Unit is available in the new faceplate style enclosure. This can be mounted with the supplied back-box for surface mounting or flush mounted using a UK double gang flush mounting back-box of minimum depth 30mm.OperationThe Intelligent InputOutput Unit provides supervision of one or more normally open contacts connected to a single pair of cables and a set of changeover relay output contacts.Key FeaturesImproved design for ease of wiring meaning faster installationContains controllable isolatorAddress range 1 - 254Nine pre-configured modes including compatibility mode from XP95Discovery to CoreProtocol systemsFailsafe mode meets BS 7273-4 requirementsConfigurable input stylesEarth fault monitoring

GBP 55.15
1

Apollo Marine DIN-Rail Dual Isolator 55000-770MAR

Apollo Marine DIN-Rail Dual Isolator 55000-770MAR

Apollo Marine DIN-Rail Dual Isolator 55000-770MARThe Marine DIN-Rail Dual Isolator provides in one housing two independent isolators which sense and isolate short-circuits on loops and spurs. This unit needs to be installed in a suitable enclosure Part No. 29600-239240 or equivalent and secured using the end stops.OperationThe isolators are loop-powered and are polarity sensitive. A maximum of twenty detectors may be installed between isolators. When a short-circuit condition exists on either side of the isolator the yellow LED is illuminated.Under normal operating conditions a low impedance is present between the two negative terminals of each isolator channel so that power and signals are passed to the next base in line.If a short-circuit or abnormally low impedance occurs across the loop the fall in voltage is sensed and the isolator isolates the negative supply in the direction of the fault. In this condition the yellow LED of the affected channel will be illuminated. The isolated section of loop is tested using a current pulse every five seconds. When the short-circuit is removed the power will automatically be restored.Key FeaturesLoop-poweredUp to 20 detectors can be installed between isolatorsAllows fully isolated spurs

GBP 78.92
1

Apollo SA6700-100APO Intelligent Twin Switch Monitor

Apollo SA6700-100APO Intelligent Twin Switch Monitor

Apollo SA6700-100APO Intelligent Twin Switch MonitorThe Intelligent Twin Switch Monitor provides the functionof two Switch Monitor units within one enclosure. The two units are electrically independent of each other. There is a DILswitch on each unit to set the address.Both Switch Monitor units in the enclosure are designed tomonitor the state of one or more single pole volt-free contactsconnected on a single pair of cables to report the status. Ithas a selectable status reporting delay making it suitable formonitoring flow switches. Compatible with XP95 Discovery and CoreProtocol digital communication protocols.ConstructionThe Intelligent Twin Switch Monitor is available in the new faceplate style enclosure. This can be mounted with the supplied back-box for surface mounting or flush mounted using a UK double gang flush mounting back-box of minimum depth 30mm.Key FeaturesImproved design for ease of wiring meaning faster installationContains controllable isolatorAddress range 1 - 254Five pre-configured modes including compatibility mode from XP95Discovery to CoreProtocol systemsPriority mode for first responseConfigurable input stylesEarth fault monitoring

GBP 65.76
1

Apollo SA4700-104APO Intelligent Twin Input Output Unit

Apollo SA4700-104APO Intelligent Twin Input Output Unit

Apollo SA4700-104APO Intelligent Twin Input Output UnitThe Intelligent Twin InputOutput Unit provides the functionof two InputOutput Units within one enclosure. The twounits are electrically independent of each other. There is a DILswitch on each unit to set the address.Both inputoutput units in the enclosure provide supervisionof one or more normally open volt free contacts connectedto a single pair of cables and a set of changeover relay outputcontacts. Compatible with XP95 Discovery and CoreProtocol digital communication protocols.Mechanical ConstructionThe Intelligent Twin InputOutput Unit is available in the new faceplate style enclosure. This can be mounted with the supplied backbox for surface mounting or flush mounted using a UK double gang flush mounting back-box of minimum depth 30mm.Key FeaturesImproved design for ease of wiring meaning faster installationContains controllable isolatorAddress range 1 - 254Nine pre-configured modes including compatibility mode from XP95Discovery to CoreProtocol systemsFailsafe mode meets BS 7273-4 requirementsConfigurable input stylesEarth fault monitoring

GBP 77.62
1

Apollo XP95 Manual Call Point without Isolator - 55100-905APO

Apollo XP95 Manual Call Point without Isolator - 55100-905APO

Apollo XP95 Manual Call Point without Isolator - 55100-905APOA seven-segment DIL switch enables the addressing of each call point at commissioning stage. When operated the manual call point interrupts the polling cycle for a fast response. Bi-coloured LEDs indicate isolate and normal conditions.The XP95 range of analogue addressable fire detectors uses tried and trusted technology to give the best performance and has unique features that benefit the installer and the end user. It is suitable for medium-to-large applications with simple installation requirements.As it operates using digital communication XP95 has a high immunity from corruption and is therefore often preferred in a large system where life safety is critical. XP95 products are frequently used in commercial industrial financial government ITtelecoms and healthcare applications.The choice of detector from the XP95 range follows the well-established principles of system design. The optimum detector type will depend on the type of fire riskfire load and the type of environment in which the detector is sited. For general use smoke detectors are recommended since these give the highest level of protection.Key FeaturesPlug and Play terminal connections for fast wiringContinuity link for wiring test before commissioningReports an alarm in under 0.2 secondsResettable element

GBP 55.27
1

Apollo SA7800-870APO Touch Screen Portable Test Set Unit

Apollo SA7800-870APO Touch Screen Portable Test Set Unit

Apollo SA7800-870APO Touch Screen Portable Test Set UnitThe Apollo Test Set is a portable test unit featuring a touch screen display capable of providing several functions in interrogating and controlling all devices connected to the unit either individual devices or compete circuits of analogue addressable devices in the Apollo ranges CoreProtocol Discovery and XP95.How does the product workThe standard view allows devices to be scanned and controlled through the manipulation of the devices output bits. Devices can also be self-tested using the test set and the different functionality modes can also be controlled. The unit may be powered from an AC mains charger unit or from its own internal batteries. The loop or individual address can be connected to the unit using loop connection ports which are located on the top of the device.What problem does this help solveThe device also has the functionality to test the diagnostics and integrity of the loop to find earth faults etc. The device offers fault finding capabilities which allows for time spent on site to be cut down during the commissioning stage of the system installation. The result of this is time reduced on site for the end user which reduces the overall costs of installing Apollo systems.Kit ContainsThe Apollo Test Set UnitA universal chargerTwo red connector cablesTwo black connector cablesTwo yellow connector cablesGreen connector cableXPERT 8 Intelligent Mounting BaseCarry strapQuick Start Guide

GBP 828.46
1

Apollo XP95 Optical Smoke Detector 55000-600APO

Apollo XP95 Optical Smoke Detector 55000-600APO

Apollo XP95 Optical Smoke Detector - 55000-600APOThe XP95 range of analogue addressable fire detectors uses tried and trusted technology to give the best performance and has unique features that benefit the installer and the end user. It is suitable for medium-to-large applications with simple installation requirements. As it operates using digital communication XP95 has a high immunity from corruption and is therefore often preferred in a large system where life safety is critical. XP95 products are frequently used in commercial industrial financial government ITtelecoms and healthcare applications.Device AddressingEach XP95 device responds to interrogation and command from central control equipment. It communicates to the panel information on status command bits type location and other information that allows an alarm to be raised even when the device is not itself being interrogated. Message error checking is also provided. The devices are compatible with Discovery systems and control equipment to aid maintenance extension and upgrade of existing systems.A unique patented XPERT card provides simple user friendly and accurate identification of detector location whereby a coded card inserted in the base is read by any detector once it is plugged in. All the electronic components are in the detector but the location information is held in the base. The address card simplifies and speeds up installation and commissioning. Addressing errors during maintenance and service are eliminated.Brand FeaturesAlarm flag for fast alarm reportingAlarm address for fast location of alarmXPERT 7 Card addressingElectronics-free baseEasy installationElegant designKey FeaturesXP95 Discovery and CoreProtocol compatibleResponds well to slowburning smouldering firesWell-suited to bedrooms and escape routesUnaffected by wind or atmospheric pressure

GBP 32.66
1

Apollo XP95 Manual Call Point with Isolator - 55100-908APO

Apollo XP95 Manual Call Point with Isolator - 55100-908APO

Apollo XP95 Manual Call Point with Isolator - 55100-908APOThe XP95 range of analogue addressable fire detectors uses tried and trusted technology to give the best performance and has unique features that benefit the installer and the end user. It is suitable for medium-to-large applications with simple installation requirements. As it operates using digital communication XP95 has a high immunity from corruption and is therefore often preferred in a large system where life safety is critical. XP95 products are frequently used in commercial industrial financial government ITtelecoms and healthcare applications.The new Apollo XP95 EN54-112001 compliant Manual Call Point MCP is based on the KAC conventional MCP range. It is electronically and mechanically backward compatible with previous Apollo call points based on KACs World Series product. The address of each call point is set at the commissioning stage by means of a seven-segment DIL switch.A single bi-coloured alarm LED is provided on the call point. This LED is controlled independently of the call point by the control panel. The red LED is lit when the call point has been activated. An amberyellow LED indicates a fault. Call points can be remotely tested from the panel by transmission of a single bit in the communications protocol. Call points respond by providing a value of 64 which corresponds to the alarm value.The choice of detector from the XP95 range follows well established principles of system design. The optimum detector type will depend on the type of fire riskfire load and the type of environment in which the detector is sited.Key FeaturesA seven-segment DIL switch enables the addressing of each call point at commissioning stageWhen operated the manual call point interrupts the polling cycle for a fast responseBi-coloured LEDs indicate isolate and normal conditions

GBP 51.37
1

Apollo XP95 Heat Detector Standard Temperature 55000-400APO

Apollo XP95 Heat Detector Standard Temperature 55000-400APO

Apollo XP95 Heat Detector Standard Temperature 55000-400APOThe XP95 Heat Detector monitors temperature by using a single thermistor which provides a count output proportional to the external air temperature. The XP95 range features two heat detectors standard and high temperature. The standard heat detector is classified as an A2S device and will report an alarm at 55C. The high temperature detector classified as a CS device will report an alarm at 90C.Brand InformationThe XP95 range of analogue addressable fire detectors uses tried and trusted technology to give the best performance and has unique features that benefit the installer and the end user. It is suitable for medium-to-large applications with simple installation requirements. As it operates using digital communication XP95 has a high immunity from corruption and is therefore often preferred in a large system where life safety is critical. XP95 products are frequently used in commercial industrial financial government ITtelecoms and healthcare applications.OperationThe XP95 heat detectors have a low air flow resistance case made of self-extinguishing white polycarbonate. The devices monitor heat by using a single thermistor network which provides a voltage output proportional to the external air temperature.The standard heat detectors 55000-400 and 55000-420 respond to increasing air temperature in such a way that they are classified as an A2S device. Both devices will give 55 counts at 55C. A high temperature CS heat detector 55000-401 which can be installed in a typical ambient temperature of 55C is available. This device will give 55 counts at 90C.Key FeaturesIdeal in environments that are dirty or smoky under normal conditionsWell-suited to warehouses loading bays and car parksUnaffected by wind or atmospheric pressureOther part codes include AD-2002

GBP 32.66
1

Apollo XP95 DIN-Rail Sounder Controller 5 Amperes 55000-182APO

Apollo XP95 DIN-Rail Sounder Controller 5 Amperes 55000-182APO

Please note This product currently has an extended leadtime due to a component shortage. Please contact us for further information.Apollo XP95 DIN-Rail Sounder Controller 5 Amperes 55000-182APOThe DIN-Rail Sounder Controller 5 Amperes is used to control the operation of a zone of externally powered sounders and report their status to the control panel.Electrical DescriptionThe DIN-rail Sounder Controller is loop powered and operates at 1728V DC. It requires a local power supply of 1235V DC to power the external load which may be up to 5A. A polarising diode is required with each alarm device as sounders are operated by voltage reversal provided by a double-pole change-over relay. The sounder circuit is protected by a fuse rated at 5A quick acting.OperationThe Sounder Controller allows sounders to be operated continuously or be pulsed 1 second on 1 second off. Sounders may be operated individually or in groups and whichever address mode has been applied may be synchronised when in pulsed operation. An opto-coupled input is provided to monitor the state of the external power supply. In normal operation the Sounder Controller returns a pre-set analogue value of 16 but in the event of an open or short-circuit fault or of a fault in the external power supply the unit returns a pre-set analogue value of 4.Key FeaturesAllows sounders to be operated continuously or be pulsed 1 second on 1 second offMay be synchronised with loop soundersAn opto-coupled input is provided to monitor the state of the external power supplyFeatures group addressingWill accept a load of up to 5A

GBP 97.03
1