55 results (0,18288 seconds)

Show all filters

Brand

Colour

Show all

Size

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Ansell ANSELL HYFLEX 11-616 GLOVE SZ 09 (L)

Ansell ANSELL HYFLEX 11-616 GLOVE SZ 09 (L)

This very thin glove offers outstanding comfort, fit and sensitivity for the most delicate handling. 18-gauge knitting technology allows this glove to be ultra-thin yet tough. Designed for a wide range of lightweight applications in dry or slightly oily environments, it is ideal for workers who need a higher level of fit, touch and , Ideal for applications where cotton gloves or no gloves at all are used despite the risk of scrapes, blisters and minor injuries. The dark liner Is well-suited for environments that present a certain degree of dirt. EN388:2003, Level 2- Abrasion, Level 1 - Cut Resistance, Level 2 - Tear Resistance, Level 1 - Puncture

GBP 5.19
1

Ansell LOW VOLTAGE ELECTR INSULATING GLOVE (CLASS 0) 14" SIZE 9 L

Ansell LOW VOLTAGE ELECTR INSULATING GLOVE (CLASS 0) 14" SIZE 9 L

Ergonomically designed natural rubber electrical insulating gloves for all-day safety and comfort, Natural rubber latex utilises a proprietary environmentally friendly dipping process for ultimate flexibility and dexterity,Ergonomic hand-at-rest shape and non-splayed fingers reduce hand fatigue,Generous flared cuff allows room for clothing,Smooth-finish for easy donning and doffing, 360MM / 14 Length ,Used in combination with AN96-002 leather protector to provide mechanical protection (worn over class 00 & 0 only),Certified for resistance to acid (Category A), Ozone (Category Z) and very low temperatures (Category C),Applications with risk of touch voltage AC maximum 1000 V (DC maximum 1500),Electrical Glove Class 0 offers arc flash protection Class 1 in accordance with EN 61482-1-2,EN 60903:2003 Live working. Gloves of insulating material

GBP 47.99
1

Ansell LOW VOLTAGE ELECTRICAL INSULATING GLOVE (CLASS 0) 9 L

Ansell LOW VOLTAGE ELECTRICAL INSULATING GLOVE (CLASS 0) 9 L

Ergonomically designed natural rubber electrical insulating gloves for all-day safety and comfort, Natural rubber latex utilises a proprietary environmentally friendly dipping process for ultimate flexibility and dexterity,Ergonomic hand-at-rest shape and non-splayed fingers reduce hand fatigue,Generous flared cuff allows room for clothing,Smooth-finish for easy donning and doffing, 280MM / 11 Length ,Used in combination with AN96-002 leather protector to provide mechanical protection (worn over class 00 & 0 only),Certified for resistance to acid (Category A), Ozone (Category Z) and very low temperatures (Category C),Applications with risk of touch voltage AC maximum 1000 V (DC maximum 1500),Electrical Glove Class 0 offers arc flash protection Class 1 in accordance with EN 61482-1-2,EN 60903:2003 Live working. Gloves of insulating material

GBP 49.99
1

Ansell Alpha-Tec 58-535B Glove L (09) - Pack of 6

Ansell Alpha-Tec 58-535B Glove L (09) - Pack of 6

Enhanced grip: Thanks to their ANSELL GRIP coating, AlphaTec 58-535B safety gloves minimize the force required to handle oily or wet components, Elevated comfort: Their black acrylic inner liner improves comfort and facilitates outdoor application, Advanced defences: AlphaTec 58-535B work gloves bonded construction, featuring a coating polymer that doesnt penetrate the liner in manufacture, limits liquid and chemical leakage, Improved durability: They also boast ANSI/EN compliant abrasion resistance , Specialized protection: Beyond chemical resistance, they satisfy EN 407 contact heat level 1, further enhancing workplace safety, Augmented dexterity: AlphaTec 58-535B PPE gloves lightweight 7-gauge design offers greater dexterity and flexibility, Nitrile glove with acrylic black liner, 13.4 (340mm) length , EN 407 Protective gloves against thermal risks X1XXXX, EN ISO 374-1:2016 Type A Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for chemical risks, AJKLOPT, EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for micro-organisms risks, Food safe, EN 388:2016 Protective gloves against mechanical risks 3122A, Level 3 Abrasion, Level 1- Cut Resistance , Level 2 Tear Resistance, Level 2- Puncture, Level A- ISO 13997 Cut Resistance

GBP 71.99
1

Ansell 1500 Plus Stitched - Model 111 Size L Protective Suits

Ansell 1500 Plus Stitched - Model 111 Size L Protective Suits

This anti-static, breathable coverall delivers proven protection against hazardous particles (the KAKEN Particle penetration test showed 99.9% filtration of particles >3 microns). Constructed with breathable SMS fabric, these coveralls allow for airflow to reduce the risk of heat stress and user discomfort. Features and Benefits Silicone-free and suitable for paint applications Elasticated wrists, waist and ankles optimises body fit for improved comfort Stitched seams for added strength 3-piece hooded design for maximum movement and comfortable fit 2-way front zipper and resealable storm flap improving wearer comfort Typical Applications Metal fabrication Construction Machinery and Equipment Life Sciences Chemical handling Standards CE Category III EN ISO 13982-1 Type 5 Dry Particle Suit EN13034 Type 6 Low Level Spray Tight Suit EN1073-2 Class 1 Barrier to radioactive particulates EN1149-5 Anti-static

GBP 3.69
2

Ansell Alpha-Tec 58-005 Gauntlet Large Size 09 - Pack of 6

Ansell Alpha-Tec 58-005 Gauntlet Large Size 09 - Pack of 6

AlphaTec 58-005 is an evolution in chemical glove protection whilst making advancements in ergonomics to ensure exceptional fit, feel and tactility. Providing incredible durability and versality alongside a supported nylon liner for comfort, the AlphaTec 58-005 is the perfect chemical glove for acids, hydrocarbons, fats, oils amongst many others. Unique Nitrile/Neoprene blend provides enhanced chemical permeation and degradation resistance, Ansell Grip Technology for the handling of wet or oily parts providing enhanced dexterity, grip and comfort, Optimized fit that integrates the nylon liner into the nitrile and neoprene shell for better dexterity & tactility versus double gloving, Cuff can be folded to act as a gutter to prevent chemicals running down the arm, 13.8 (350mm) length , EN 407 Protective gloves against thermal risks X1XXXX, EN ISO 374-1:2016 Type A Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for chemical risks, AJKLMNOPT, EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for micro-organisms risks, EN 388:2016 Protective gloves against mechanical risks 4122A, Level 4- Abrasion, Level 1- Cut Resistance , Level 2- Tear Resistance, Level 2- Puncture, Level A- ISO 13997 Cut Resistance

GBP 79.99
1

Ansell 1800 Comfort Bound - Model 195 Size L Protective Suits

Ansell 1800 Comfort Bound - Model 195 Size L Protective Suits

The AlphaTec Chemical Protection Coveralls offer Type 5/6 protection against chemicals and airborne particulates. Designed for use in warm working environments, the moisture-permeable fabric prevents the build-up of body heat and keeps the wearer comfortable at all times. Features and Benefits Breathable SMS material to help reduce the risk of heat stress Silicone-free and suitable for spray painting applications Low linting for reduced risk of contamination in critical areas Elasticated waist, ankles, hood, and wrists for a secure and comfortable fit Anti-static treatment to disperse static build-up Designed to fit the contours of the body for improved comfort and safety Typical Applications Aerospace Automotive Boat and shipbuilding Life sciences Metal fabrication Wind turbine manufacturing Composites General maintenance Paint spraying Surface preparation Notes Type 5 EN ISO 13982-1 Dry particle suit Type 6 EN13034 Low-level spray tight suit EN1149-5 Anti-static EN1073-2 Barrier to radioactive particulates - Class 1 Notes Previously known as MICROGARD

GBP 9.99
1

Ansell Alpha-Tec 58-53W Glove Size 09 (L) - Pack of 6

Ansell Alpha-Tec 58-53W Glove Size 09 (L) - Pack of 6

Enhanced grip: Thanks to their ANSELL GRIP coating, AlphaTec 58-535W safety glovesminimize the force required to handle oily or wet components, Elevated comfort: Their white nylon inner liner enhances comfort and helps make them perfect for indoor applications, Advanced defences: AlphaTec 58-535W work gloves bonded construction, featuring a coating polymer that doesnt penetrate the liner in manufacture, limits liquid and chemical leakage, Improved durability: They also boast ANSI/EN compliant abrasion resistance , Specialized protection: Beyond chemical resistance, they satisfy EN 407 contact heat level 1, further enhancing workplace safety, Nitrile glove with nylon white liner, 13.4 (340mm) length , EN 407 Protective gloves against thermal risks X1XXXX, EN ISO 374-1:2016 Type A Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for chemical risks, AJKLOPT, EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for micro-organisms risks, Food safe, EN 388:2016 Protective gloves against mechanical risks 3132A, Level 3 Abrasion, Level 1- Cut Resistance , Level 3- Tear Resistance, Level 2- Puncture, Level A- ISO 13997 Cut Resistance

GBP 51.99
1

Ansell ANSELL ALPHATEC 23-202 GLOVE SIZE 09 (L) Pack of 6

Ansell ANSELL ALPHATEC 23-202 GLOVE SIZE 09 (L) Pack of 6

Comfortable PVC glove with good dexterity and low temperature protection ,PVC with acrylic fleece & 13-gauge cotton double liners,Soft integral PVC coating,PVC coating offers good chemical resistance,Roughened sandblast finish on the glove and smooth finish on the cuff.Designed to protect at temperatures down to -30C,Warms the hands immediately after donning,Good grip when handling both slippery and wet materials, 300mm length ,Food Safe,EN 511 Protective gloves against cold 021,EN ISO 374-1:2016 Type A Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for chemical risks, KLT, EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for micro-organisms risks,EN 388:2016 Protective gloves against mechanical risks 3121B,Level 3- Abrasion,Level 1- Cut Resistance ,Level 2- Tear Resistance,Level 1- Puncture,Level B ISO 13997 Cut Resistance

GBP 101.99
1

Ansell ANSELL ALPHATEC 04-005 GAUNTLET SIZE 09 (L) PK 12

Ansell ANSELL ALPHATEC 04-005 GAUNTLET SIZE 09 (L) PK 12

Heavyweight PVC supported glove with excellent comfort,Special nitrile and PVC blend formulation to provide good durability, protection and flexibility, even in low temperatures,13-gauge seamless cotton lining for added comfort and protection,Foam palm providing good oil resistant as well as good grip performance in wet & oily environment, 380mm length ,Food safe,EN ISO 374-1:2016 Type A Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for chemical risks, JKLPMT, EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for micro-organisms risks,EN 388:2016 Protective gloves against mechanical risks 4131A,Level 4- Abrasion,Level 1- Cut Resistance ,Level 3- Tear Resistance,Level 1- Puncture,Level A ISO 13997 Cut Resistance

GBP 0.00
1

Ansell ANSELL ALPHATEC 04-004 GAUNTLET SIZE 09 (L) PK 12

Ansell ANSELL ALPHATEC 04-004 GAUNTLET SIZE 09 (L) PK 12

Heavyweight PVC supported glove with excellent comfort,Special nitrile and PVC blend formulation to provide good durability, protection and flexibility, even in low temperatures,13-gauge seamless cotton lining for added comfort and protection,Foam palm providing good oil resistant as well as good grip performance in wet & oily environment, 300mm length ,Food safe,EN ISO 374-1:2016 Type A Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for chemical risks, JKLPMT, EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for micro-organisms risks,EN 388:2016 Protective gloves against mechanical risks 4131A,Level 4- Abrasion,Level 1- Cut Resistance ,Level 3- Tear Resistance,Level 1- Puncture,Level A ISO 13997 Cut Resistance

GBP 89.99
1

Ansell Alpha-Tec 58-008 Gauntlet Size 09 (L) - Pack of 10

Ansell Alpha-Tec 58-008 Gauntlet Size 09 (L) - Pack of 10

AlphaTec 58-008 delivers chemical protection with the advantage of extended length protection covering the full arm. Designed for applications with a high splash risk or full immersion. AlphaTec 58-008s full length is 100% nitrile, offering the same protection at the fingertip to the end of the cuff, Nitrile polymer for excellent mechanical protection as well as resistance to oils, fats, greases and hydrocarbons , Lozenge grip for enhance grip in dry and wet conditions, Optimized fit that integrates the nylon liner into the nitrile and neoprene shell for better dexterity & tactility versus double gloving, Excellent dry & wet grip enhance dexterity and reduce hand fatigue , Wide cuff to allow donning over protection clothing , 25.2 (640mm) length , Food safe, EN ISO 374-1:2016 Type A Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for chemical risks, AJKLOT, EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for micro-organisms risks, EN 388:2016 Protective gloves against mechanical risks 4102X, Level 4- Abrasion, Level 1- Cut Resistance , Level 0- Tear Resistance, Level 2- Puncture, Level X- ISO 13997 Cut Resistance

GBP 259.99
1

Ansell Alphatec 37-310 Glove Size 09 (L) X Pair

Ansell Alphatec 37-310 Glove Size 09 (L) X Pair

* These food-processing gloves offer an engineered fit to allow an optimum balance of fit and flexibility both on its own or as an over glove* 8mil/0.2mm thickness allows dexterity and tactility without a loss of durability* Nitrile Rubber (NBR) offering protection against light acids, greases, oils and liquids* The latex-free formulation of these meat-processing gloves presents no risk of Type 1 allergies* Reverse lozenge grip design* Unflocked to prevent the risk of food contamination* Long cuff extends to the forearm* 12.2 (310mm) Length * Green, 37-300 and Yellow, 37-320 Variants available upon request* EN ISO 374-1:2016 Type A Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for chemical risks, JKT* EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for micro-organisms risks* EN 421 Protective gloves against ionizing radiation and radioactive contamination* ISO 18889:2019 Protective gloves for pesticide operators and re-entry workers. Performance requirements* EN 388:2016 Protective gloves against mechanical risks 2001X* Abrasion- Level 2* Cut Resistance- X* Tear- 0* Puncture- Level 1

GBP 2.99
1

Ansell ANSELL ALPHATEC 37-310 GLOVE SIZE 09 (L) PK 144

Ansell ANSELL ALPHATEC 37-310 GLOVE SIZE 09 (L) PK 144

These food-processing gloves offer an engineered fit to allow an optimum balance of fit and flexibility both on its own or as an over glove, 8mil/0.2mm thickness allows dexterity and tactility without a loss of durability, Nitrile Rubber (NBR) offering protection against light acids, greases, oils and liquids, The latex-free formulation of these meat-processing gloves presents no risk of Type 1 allergies, Reverse lozenge grip design, Unflocked to prevent the risk of food contamination, Long cuff extends to the forearm, 12.2 (310mm) Length , Green, 37-300 and Yellow, 37-320 Variants available upon request, EN ISO 374-1:2016 Type A Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for chemical risks, JKT, EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for micro-organisms risks, EN 421 Protective gloves against ionizing radiation and radioactive contamination, ISO 18889:2019 Protective gloves for pesticide operators and re-entry workers. Performance requirements, EN 388:2016 Protective gloves against mechanical risks 2001X, Abrasion- Level 2, Cut Resistance- X, Tear- 0, Puncture- Level 1

GBP 149.99
1

Ansell ANSELL ALPHATEC SOLVEX 37-185 GAUNTLET SIZE LARGE (09) PK 12

Ansell ANSELL ALPHATEC SOLVEX 37-185 GAUNTLET SIZE LARGE (09) PK 12

High-comfort nitrile chemical resistant glove for a wide range of applications, covering to the top of the elbow, High performance nitrile compound provides an outstanding combination of chemical resistance and strength, for optimal results in wet or dry work environments, High levels of flexibility, comfort, and dexterity, Suitable for heavy-duty cleaning applications, No inner cotton flocking, reducing risk of lint contamination and making it ideal for production areas sensitive to the introduction of external impurities, Sand patch finish giving the glove a smooth surface that decreases, Indirect costs, thanks to fewer rejects of fragile parts, Fully reusable, with an unequalled abrasion resistance, 18 (457mm) length , Acceptable quality level (AQL): 0.65, EN ISO 374-1:2016 Type A Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for chemical risks, AGJKLPT, EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for micro-organisms risks, ISO 18889:2019 Protective gloves for pesticide operators and re-entry workers. Performance requirements, Food safe, EN 388:2016 Protective gloves against mechanical risks 4102X, Level 4- Abrasion, Level 1- Cut Resistance , Level 0- Tear Resistance, Level 2- Puncture, Level X- ISO 13997 Cut Resitance

GBP 112.99
1

Ansell 2000 Standard Bound - Model 111 Size L Protective Suits

Ansell 2000 Standard Bound - Model 111 Size L Protective Suits

Exceptional breathable microporous laminate coveralls with comfort with exceptional liquid and particulate protection. Ideal for a wide range of industrial applications. Features and Benefits Thee piece hooded design for optimum fit Elasticated hood, wrists, waist and ankles to secure fit and protect Two-way front zipper with resealable storm flap for user convenience Finger loops to secure in place for added protection Silicone free design and low linting Protective barrier against low concentration liquid chemicals and liquid, particulate biological hazards, and moisture vapour permeability Typical Applications Pharmaceutical industries Agriculture Paint spraying Crime scene investigation Veterinary services Standards Type 5 EN ISO 139821 Dry particle suit Type 6 EN13034 Low level spray tight suit EN14126 Barrier to infective agents EN10732 Barrier to radioactive particulates Class 2 EN11495 antistatic DIN 32781 pesticides Notes Sizes: XS-5XL

GBP 5.99
2

Ansell ANSELL ALPHATEC 53-001 GAUNTLET SIZE 09 (L) Pack of 6

Ansell ANSELL ALPHATEC 53-001 GAUNTLET SIZE 09 (L) Pack of 6

Chemical-resistant glove with a unique multi-layer design for broader protection,Maximized protection: AlphaTec 53-001 safety gloves MICROCHEM multi-layer nitrile and neoprene protective barrier ensures EN 374 type A chemical defences and protection from acids and hydrocarbons ,Enhanced grip: ANSELL GRIP coating offers secure grip for wet or oily components ,Elevated comfort: AlphaTec 53-001 chemical gloves soft nylon inner liner grants them a comfortable feel ,Considered aesthetics: Their black cuff design makes them perfect for dirt-prone outdoor application ,Certified skin-friendly and harm-free: Oeko-Tex certification ensures they contain no substances harmful to human health, Improved durability: AlphaTec 53-001 industrial gloves multi-layer coating is also abrasion resistant, achieving EN and ANSI level 3 abrasion resistance, 350mm length ,EN 407 Protective gloves against thermal risks X1XXXX,EN ISO 374-1:2016 Type A Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for chemical risks, ACFGJKLMNOPST, EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for micro-organisms risks,EN 388:2016 Protective gloves against mechanical risks 3121A,Level 3- Abrasion,Level 1- Cut Resistance ,Level 2- Tear Resistance,Level 1- Puncture,Level A- ISO 13997 Cut Resistance

GBP 89.99
1

Ansell 1500 Stitched - Model 138 Size L Protective Suits

Ansell 1500 Stitched - Model 138 Size L Protective Suits

The AlphaTec 1500 coveralls combine strength with exceptional protection against hazardous particulate. Designed especially for workers who are involved in the stripping, clearing up, and handling of asbestos and other hazardous powders, these breathable coveralls are the ideal choice for a range of industrial settings. Features and Benefits 3 piece hood for optimum coverage 2 way front zipper with resealable storm flap for convenience Elasticated hood, wrists, waist and ankles for full movement Stitched and taped seams for durability Air and water permeable to prevent heat build-up Typical Applications Asbestos related work General maintenance Construction Handling powders Standards CE Category III [Type 5, Type 6] EN 1073-2:2002

GBP 4.09
1

Ansell 1500 Stitched - Model 138 Size L Protective Suits

Ansell 1500 Stitched - Model 138 Size L Protective Suits

The AlphaTec 1500 coveralls combine strength with exceptional protection against hazardous particulate. Designed especially for workers who are involved in the stripping, clearing up, and handling of asbestos and other hazardous powders, these breathable coveralls are the ideal choice for a range of industrial settings. Features and Benefits 3 piece hood for optimum coverage 2 way front zipper with resealable storm flap for convenience Elasticated hood, wrists, waist and ankles for full movement Stitched and taped seams for durability Air and water permeable to prevent heat build-up Typical Applications Asbestos related work General maintenance Construction Handling powders Standards CE Category III [Type 5, Type 6] EN 1073-2:2002

GBP 3.99
1

Ansell ANSELL ALPHATEC 58-330 GLOVE SIZE 09 (L) PK 12

Ansell ANSELL ALPHATEC 58-330 GLOVE SIZE 09 (L) PK 12

AlphaTec AQUADRI gloves are engineered with a unique moisture management technology that keeps hands dryer, for significantly longer periods of time. The design features a two-layered coating construction with a superior nitrile film for advanced chemical protection and an inner soft foam coating, making a difference especially when sweaty hands are a problem, resulting in an improved user comfort and performance.Patented AQUADRI technology brings a unique performance in moisture management that significantly reduces sweat build up inside the glove under hot & humid environments.High performance nitrile compound offers a far superior snag, puncture and abrasion protection compared with rubber or neoprene gloves,Reverse lozenge palm finish for improved dry/wet grip,Foldable cuff gutter to prevent dripping on the forearm, 320mm length ,Food safe,EN ISO 374-1:2016 Type A Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for chemical risks, JKLOPT, EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for micro-organisms risks,EN 388:2016 Protective gloves against mechanical risks 3101X,Level 3- Abrasion,Level 1- Cut Resistance ,Level 0- Tear Resistance,Level 1- Puncture,Level X ISO 13997 Cut Resistance

GBP 69.99
1

Ansell ACTIVARMR 80-813 GLOVES 09(L) PK 12

Ansell ACTIVARMR 80-813 GLOVES 09(L) PK 12

First glove to combine outstanding flame resistance with high cut protection and ergonomic design, Materials used in the glove are inherently flame resistant, even after washing, Arc Flash Hazard/Risk Category 1,: helps protect workers against arc flash hazards, Exclusive composite yarn provides exceptional cut resistance for safe handling of sharp objects and materials, Soft foam coating to ensure great flexibility and a secure grip in a variety of environments, Ergonomic design for superior comfort and reduced hand fatigue, Anti-static according to EN1149, Arc Flash NFPA 70E - Test Method/Standard: ASTM F2675-22 - Result: Hazard/Risk Category (HRC) 1 , Category III, EN 407 Protective gloves against thermal risks 4.1.2.1.1.0, EN388:2016 Protective gloves against mechanical risks 2X42CIdeal applications, Equipment assembly, replacing filters and parts, Facility and machinery maintenance, Pipe installation and repair, Carpentry/Scaffolding, Heavy duty metal handling, Heavy equipment and vehicle maintenance, De-energised electrical wiring & clean-up

GBP 239.99
1

Ansell ANSELL ALPHATEC 58-335 GLOVE SIZE 09 (L) PK 12

Ansell ANSELL ALPHATEC 58-335 GLOVE SIZE 09 (L) PK 12

AlphaTec AQUADRI gloves are engineered with a unique moisture management technology that keeps hands dryer, for significantly longer periods of time. The design features a two-layered coating construction with a superior nitrile film for advanced chemical protection and an inner soft foam coating, making a difference especially when sweaty hands are a problem, resulting in an improved user comfort and performance.Patented AQUADRI technology brings a unique performance in moisture management that significantly reduces sweat build up inside the glove under hot & humid environments.High performance nitrile compound offers a far superior snag, puncture and abrasion protection compared with rubber or neoprene gloves,Reverse lozenge palm finish for improved dry/wet grip,Foldable cuff gutter to prevent dripping on the forearm,Longer version than the 58-330 for further protection, 380mm length ,Food safe,EN ISO 374-1:2016 Type A Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for chemical risks, JKLOPT, EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for micro-organisms risks,EN 388:2016 Protective gloves against mechanical risks 4101X,Level 4- Abrasion,Level 1- Cut Resistance ,Level 0- Tear Resistance,Level 1- Puncture,Level X ISO 13997 Cut Resistance

GBP 69.99
1