16 results (0,13858 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Advanced MxPro 5 MXP-537F 10-way Switch Input Card Fitted

Advanced MxPro 5 MXP-537F 10-way Switch Input Card Fitted

Advanced MxPro 5 MXP-537F 10-way Switch Input Card FittedThe Programmable 10 Way Programmable Monitored Input Card is an optional peripheral unit that provides 10 individually programmable monitored switch inputs.Up to 16 cards can be connected to an MxPro 5 series panel providing a maximum of up to 160 additional monitored inputs.Each input is fully programmable using the powerful dynamic cause-and-effect rules.The unit is available as either a printed circuit card only.Applications LimitationsEN54-18 approved switch monitor circuit.Key FeaturesEach input is monitored for open and short circuit.Each input is individually programmable for Fire Fault Alarm etc.Up to 16 cards can be connected providing a total of 160 additional switch inputs.Easily configured via PC-NET-0033-year warranty as standard

GBP 407.75
1

Advanced MxPro 5 MXP-537 P-BUS 10-Way Switch Input Card

Advanced MxPro 5 MXP-537 P-BUS 10-Way Switch Input Card

Advanced MxPro 5 MXP-537 P-BUS 10-Way Switch Input CardThe Programmable 10 Way Input Card is an optional peripheral unit that provides ten individually programmable monitored switch inputs. Up to 16 cards can be connected to an MxPro 5 series panel providing a maximum of up to 160 additional monitored inputs. Each input is fully programmable using the powerful dynamic cause-and-effect rules. The unit is available as either a printed circuit card only or as a boxed unit.Applications LimitationsEN54-18 approved switch monitor circuit.Key FeaturesEach input is monitored for open and short circuit.Each input is individually programmable for Fire Fault Alarm etc.Up to 16 cards can be connected providing a total of 160 additional switch inputs.Easily configured via PC-NET-0033 year warranty as standard

GBP 407.75
1

Advanced MxPro 5 MXP-536F 8-Way Programmable Zone Monitor Card Fitted

Advanced MxPro 5 MXP-536F 8-Way Programmable Zone Monitor Card Fitted

Advanced MxPro 5 MXP-536F 8-Way Programmable Zone Monitor Card FittedThe Programmable 8-Zone Monitor Card is an optional peripheral unit that provides eight individually programmable zone monitor circuits compliant with BSEN54- 18 1998 Clause 7.8.Up to 16 cards can be connected to a multi-loop panel providing a maximum of up to 128 additional zone monitor circuits.Each zone is fully programmable using the powerful dynamic cause-and-effect rules.The unit is available as either a printed circuit card only.Applications LimitationsEN54-18 compliant zone monitor circuit.Key Features8 zone circuits - each zone is monitored for open and short circuitEach zone is individually programmable with the available dynamic cause-and-effect rulesUp to 16 cards can be connected giving a total of 128 additional zone monitors1 relay output for reset128 zone monitor circuits per panelEasily configured via PC-NET-0033 year warranty as standard

GBP 467.81
1

Advanced MxPro 5 MXP-536 P-BUS 8 Way Conventional Zone Card

Advanced MxPro 5 MXP-536 P-BUS 8 Way Conventional Zone Card

Advanced MxPro 5 MXP-536 P-BUS 8 Way Conventional Zone CardThe Programmable 8-Zone Monitor Card is an optional peripheral unit that provides eight individually programmable zone monitor circuits compliant with BSEN54- 18 1998 Clause 7.8. Up to 16 cards can be connected to a multi-loop panel providing a maximum of up to 128 additional zone monitor circuits. Each zone is fully programmable using the powerful dynamic cause-and-effect rules. The unit is available as either a printed circuit card only.Applications LimitationsEN54-18 compliant zone monitor circuit.Key Features8 zone circuits - each zone is monitored for open and short circuitEach zone is individually programmable with the available dynamic cause-and-effect rulesUp to 16 cards can be connected giving a total of 128 additional zone monitors1 relay output for reset128 zone monitor circuits per panelEasily configured via PC-NET-0033 year warranty as standard

GBP 467.81
1

Advanced LL-PG Lifeline Vibrating Pager Unit

Advanced LL-PG Lifeline Vibrating Pager Unit

Advanced LL-PG Lifeline Vibrating Pager UnitModern fire systems can be spread over huge areas covering densely populated buildings and valuable assets such as server rooms with expensive extinguishant release systems in place. By reacting quickly fire system managers and operators can save time and money reduce false alarms and cancel or facilitate evacuation.Once connected to a fire system via the standard ESPA protocol LifeLine will instantly transmit detailed information on the total system and individual panel and device conditions to personal pagers. Information can be issued on a range of triggers including alarms pre-alarms or device faults. LifeLine uses its own radio network which can be reliably configured for coverage and does not rely on third party networks such as SMS text or email.Key FeaturesStandard two-line alphanumeric pagerHand held battery operatedProgrammed to work with LifeLine to BS requirementsOut of range alert featureIn alarm condition messages sent every 10s until mainpanel alarm is resetCannot be accidentallyswitched offTone vibrate

GBP 285.53
1

Advanced LL-PG-02 Lifeline Engineering Pager

Advanced LL-PG-02 Lifeline Engineering Pager

Advanced LL-PG-02 Lifeline Engineering PagerModern fire systems canbe spread over huge areas covering densely populated buildings and valuable assets such as server rooms with expensive extinguishant release systems in place. By reacting quickly fire system managers and operators can save time and money reduce false alarms and cancel or facilitate evacuation.Once connected to a fire system via the standard ESPA protocol LifeLine will instantly transmit detailed information on the total system and individual panel and device conditions to personal pagers. Information can be issued on a range of triggers including alarms pre-alarms or device faults. LifeLine uses its own radio network which can be reliably configured for coverage and does not rely on third party networks such as SMS textor email.Key FeaturesStandard two-line alphanumeric pagerHand held battery operatedProgrammed to work with LifeLine to BS requirementsOut of range alert featureIn alarm condition messages sent every 10s until mainpanel alarm is resetCannot be accidentallyswitched offTone vibrate

GBP 285.53
1

Advanced LL-PG-01 Lifeline Vibrating Pager Unit with Out of Range enabled

Advanced LL-PG-01 Lifeline Vibrating Pager Unit with Out of Range enabled

Advanced LL-PG-01 Lifeline Vibrating Pager Unit with Out of Range enabledModern fire systems can be spread over huge areas covering densely populated buildings and valuable assets such as server rooms with expensive extinguishant release systems in place. By reacting quickly fire system managers and operators can save time and money reduce false alarms and cancel or facilitate evacuation.Once connected to a fire system via the standard ESPA protocol LifeLine will instantly transmit detailed information on the total system and individual panel and device conditions to personal pagers. Information can be issued on a range of triggers including alarms pre-alarms or device faults. LifeLine uses its own radio network which can be reliably configured for coverage and does not rely on third party networks such as SMS text or email.Key FeaturesStandard two-line alphanumeric pagerHand held battery operatedProgrammed to work with LifeLine to BS requirementsOut of range alert featureIn alarm condition messages sent every 10s until mainpanel alarm is resetCannot be accidentallyswitched offTone vibrate

GBP 285.53
1

Advanced MXP-509 Fault Tolerant Network Card MxPro 5

Advanced MXP-509 Fault Tolerant Network Card MxPro 5

Advanced MXP-509 Fault Tolerant Network Card MxPro 5The Ad-NeT network system allows all MxPro 5 series control panels remote terminals and network peripherals to be connected together using standard fire resistant two-core cable. It provides both the benefits of distributed intelligence and reduced installation costs whilst catering for the smallest two-panel network through to the largest 200 panel wide area networked system.The network operates as a true peer-to peer system allowing information from any input or output device to be passed over the network and displayed on any MxPro 5 control panel or remote terminal as required.Simply adding and connecting a network card allows any MxPro 5 control panel or remote terminal to be networked. All other nodes on the Ad-NeT system will be instantly aware of a panel as soon as it is given a valid network node address allowing additional panels to be added at any time. All panels incorporate a network analyser providing valuable diagnostic and status information and also have the facility to prevent the transmission of fires or faults during commissioning.For more complex systems the Windows based PC-NeT Mx configuration software allows sector-based programming for Mute Silence Resound and Reset control keys as well as investigation delays group disablement and test instructions. All panels within the same sector will share common controls and each panel or remote terminal can also be programmed to show specific network information on a zonal basis. For cause and effect any input device can be programmed to operate any output device on any panel.Key FeaturesLarge Ad-NeT 200 Panel NetworkUp to 1.5Km between Control PanelsWindows based PC setupNetwork Systems share up to 1000 zonesNetwork Analysis from Control PanelStandard NetworkThe maximum total cable length is 1.5km. The maximum number of network nodes is 32 50 with signal bufferFault Tolerant NetworkThe maximum cable length is 1.5km between each node and the maximum total loop length is 20km. Each network card has in-built diagnostics and is fully monitored for both short and open circuit faults between nodes. The network is capable of withstanding a single fault between nodes without loss of communications to any single panel. The maximum number of network nodes is 200.

GBP 584.40
1

Advanced MXP-503 Standard Network Card MxPro5

Advanced MXP-503 Standard Network Card MxPro5

Advanced MXP-503 Standard Network Card MxPro5The Ad-NeT network system allows all MxPro5 series control panels remote terminals and network peripherals to be connected together using standard fire resistant two-core cable. It provides both the benefits of distributed intelligence and reduced installation costs whilst catering for the smallest two-panel network through to the largest 200 panel wide area networked system.The network operates as a true peer-to peer system allowing information from any input or output device to be passed over the network and displayed on any MxPro5 control panel or remote terminal as required.Simply adding and connecting a network card allows any MxPro5 control panel or remote terminal to be networked. All other nodes on the Ad-NeT system will be instantly aware of a panel as soon as it is given a valid network node address allowing additional panels to be added at any time. All panels incorporate a network analyser providing valuable diagnostic and status information and also have the facility to prevent the transmission of fires or faults during commissioning.For more complex systems the Windows based PC-NeT Mx configuration software allows sector-based programming for Mute Silence Resound and Reset control keys as well as investigation delays group disablement and test instructions. All panels within the same sector will share common controls and each panel or remote terminal can also be programmed to show specific network information on a zonal basis. For cause and effect any input device can be programmed to operate any output device on any panel.Key FeaturesLarge Ad-NeT 200 Panel NetworkUp to 1.5Km between Control PanelsWindows based PC setupNetwork Systems share up to 1000 zonesNetwork Analysis from Control PanelStandard NetworkThe maximum total cable length is 1.5km. The maximum number of network nodes is 32 50 with signal bufferFault Tolerant NetworkThe maximum cable length is 1.5km between each node and the maximum total loop length is 20km. Each network card has in-built diagnostics and is fully monitored for both short and open circuit faults between nodes. The network is capable of withstanding a single fault between nodes without loss of communications to any single panel. The maximum number of network nodes is 200.

GBP 234.06
1

Advanced MXP-034 Peripheral Bus - 4-Way Sounder Card

Advanced MXP-034 Peripheral Bus - 4-Way Sounder Card

Advanced MXP-034 Peripheral Bus - 4-Way Sounder CardThe Programmable 4-Way Sounder Card is an optional peripheral unit that provides four individually programmable and monitored sounder output circuits compliant with BSEN54-2 1998 Clause 7.8.Up to 16 Cards can be connected to a multi-loop panel providing a maximum of 64 additional local sounder outputs.Each output is fully programmable using the powerful DynamiX Cause and Effect rules and all outputs are synchronised. The unit is available as either a printed circuit card only or as a boxed version with integral 4A power supply.Key Features4 Way Programmable Sounder Card16 cards max per Control panel totalling 64 1 Amp rated outputsEasily configured via PC-NET-0033 Year Warranty as standardFully SynchronisedEach output is 1A rated and monitored for open and short circuitsEach output is individually programmable using the Dynamix cause-and-effects rulesAll outputs can be synchronised in pulsing modesUp to 16 cards can be connected giving a total of 64 additional outputsEach output may be individually programmed

GBP 314.51
1

Advanced MxPro MXP-034-BXP Peripheral Bus - 4-Way Sounder Card with 4A PSU Boxed

Advanced MxPro MXP-034-BXP Peripheral Bus - 4-Way Sounder Card with 4A PSU Boxed

Advanced MxPro MXP-034-BXP Peripheral Bus - 4-Way Sounder Card with 4A PSU BoxedThe Programmable 4-Way Sounder Card is an optional peripheral unit that provides four individually programmable and monitored sounder output circuits compliant with BSEN54-2 1998 Clause 7.8.Up to 16 cards can be connected to a multi-loop panel providing a maximum of 64 additional local sounder outputs.Each output is fully programmable using the powerful dynamic cause-and-effect rules and all outputs are synchronised.The unit is available as either a printed circuit card only or as a boxed version with integral 4A power supply.Applications Limitations EN54-2 compliant sounder outputs. Can be used with MxPro 4 2 4 8 loop control panels programmed with version 020-02 software or later and fitted with base card hardware revision levels 10 712-1022 MxPro 5 4 loop and 09 712-1022-002 MxPro 5 2 loop or later.Requires installation of the Peripheral Bus Interface Adaptor card in the panel when using the MxPro 4 series.Key FeaturesEach output is 1A rated and monitored for open and short circuits.Each output is individually programmable using the Dynamix cause-and-effects rules.All outputs can be synchronised in pulsing modes.Up to 16 cards can be connected giving a total of 64 additional outputs.Each output may be individually programmedEasily configured via PC-NET-0033-year warranty as standard

GBP 509.08
1

Advanced MxPro MXP-034F Peripheral Bus - 4-Way Sounder Card Fitted

Advanced MxPro MXP-034F Peripheral Bus - 4-Way Sounder Card Fitted

Advanced MxPro MXP-034F Peripheral Bus - 4-Way Sounder Card FittedThe Programmable 4-Way Sounder Card is an optional peripheral unit that provides four individually programmable and monitored sounder output circuits compliant with BSEN54-2 1998 Clause 7.8.Up to 16 cards can be connected to a multi-loop panel providing a maximum of 64 additional local sounder outputs.Each output is fully programmable using the powerful dynamic cause-and-effect rules and all outputs are synchronised.The unit is available as either a printed circuit card only or as a boxed version with integral 4A power supply.Applications LimitationsEN54-2 compliant sounder outputs. Can be used with MxPro 4 2 4 8 loop control panels programmed with version 020-02 software or later and fitted with base card hardware revision levels 10 712-1022 MxPro 5 4 loop and 09 712-1022-002 MxPro 5 2 loop or later.Requires installation of the Peripheral Bus Interface Adaptor card in the panel when using the MxPro 4 series.Key FeaturesEach output is 1A rated and monitored for open and short circuits.Each output is individually programmable using the Dynamix cause-and-effects rules.All outputs can be synchronised in pulsing modes.Up to 16 cards can be connected giving a total of 64 additional outputs.Each output may be individually programmedEasily configured via PC-NET-0033-year warranty as standard

GBP 314.51
1

Advanced MxPro MXP-035F Peripheral Bus - 4-Way Relay Card Fitted

Advanced MxPro MXP-035F Peripheral Bus - 4-Way Relay Card Fitted

Advanced MxPro MXP-035F Peripheral Bus - 4-Way Relay Card FittedThe Programmable 4-Way Relay Card is an optional peripheral unit that provides four individually programmable relay output circuits.Up to 16 cards can be connected to a multi-loop control panel providing a maximum of up to 64 additional local relay outputs.Each output is fully programmable using the powerful dynamic cause-and-effects rules and all outputs are synchronised. The unit is available as either a printed circuit card only or as a boxed version with integral 1A power supply.Applications Limitations Plant control and signalling outputs. Each output can be assigned to an individual output group and is fully programmable for any output function allowed within the MxPro 4 configuration program.Fitting of the Programmable 4-Way Relay Cardin a panel precludes fitting of other panel option cards. Requires installation of the Peripheral Bus Interface Card in the panel when using the MxPro 4 series.Key FeaturesEach output is 230V 5A ratedEach output is individually programmable with any of the available DynamiX cause-and-effect rulesUp to 16 cards can be connected providing a total of 64 additional outputsEach output may be individually programmedAn input is provided to monitor the fault output from a power supply.4-way programmable relay cardEasily configured via PC-NET-0033-year warranty as standard

GBP 279.74
1

Advanced MxPro MXP-035-BXP Peripheral Bus - 4-Way Relay Card with 1.5A PSU Boxed

Advanced MxPro MXP-035-BXP Peripheral Bus - 4-Way Relay Card with 1.5A PSU Boxed

Advanced MxPro MXP-035-BXP Peripheral Bus - 4-Way Relay Card with 1.5A PSU BoxedThe Programmable 4-Way Relay Card is an optional peripheral unit that provides four individually programmable relay output circuits.Up to 16 cards can be connected to a multi-loop control panel providing a maximum of up to 64 additional local relay outputs.Each output is fully programmable using the powerful dynamic cause-and-effects rules and all outputs are synchronised. The unit is available as either a printed circuit card only or as a boxed version with integral 1A power supply.Applications Limitations Plant control and signalling outputs. Each output can be assigned to an individual output group and is fully programmable for any output function allowed within the MxPro 4 configuration program.Fitting of the Programmable 4-Way Relay Cardin a panel precludes fitting of other panel option cards. Requires installation of the Peripheral Bus Interface Card in the panel when using the MxPro 4 series.Key FeaturesEach output is 230V 5A ratedEach output is individually programmable with any of the available DynamiX cause-and-effect rulesUp to 16 cards can be connected providing a total of 64 additional outputsEach output may be individually programmedAn input is provided to monitor the fault output from a power supply.4-way programmable relay cardEasily configured via PC-NET-0033-year warranty as standard

GBP 466.21
1

Advanced Lux Intelligent LXP-302F Pulse Line Unit Fitted into Free Issued Luminaire

Advanced Lux Intelligent LXP-302F Pulse Line Unit Fitted into Free Issued Luminaire

Advanced Lux Intelligent LXP-302F Pulse Line Unit Fitted into Free Issued LuminaireConversion of an existing emergency luminaire to an addressable emergency luminaire.Advanced is proud to be an ICEL registered conversion house meeting the exacting requirements of the ICEL 1004 for the re-engineering of luminaires for emergency use. As an experienced conversion service any style of conversion can be undertaken including both fluorescents and LED light sources.Upon receipt of the luminaire it will be examined to determine the best-suited type of conversion either integral or remote.Once the conversion is complete including the addition of any addressable components the luminaires are fully tested before being returned to the customer.All components used are selected to provide the best emergency solution and performance. Standard fluorescent inverters operate with total isolation where four pole change-over operation of the lampgear connections operates with a timed fifth pole to make and break the ballast live supply.Only the highest quality nickel cadmium and nickel-metal hydride batteries are used. Conversions are completed to ensure successful operation with all ballast types including HF and dimming. Fluorescent conversions ranging from 18W T8 lamps all the way to 80W T5 tubes can be achieved including various lamp types from 2D to TCT styles.With access to a large selection of LED emergency controllers both low and high power there is a solution to all LED luminaires.Since Advanced is ISO9001 certified it means that after conversion of the luminaire to emergency operation the CE mark can be re-applied to it. With all conversions to emergency operation the full warranty of the luminaire reverts to Advanced providing peace of mind to the customer.The conversions fully incorporate all features of the Lux Intelligent range of emergency lighting test panels.Key FeaturesIntegral conversions implemented whenever possibleAdvanced are an ICEL 1004 approved conversion houseAddressable and emergency conversions availableWarranty is provided for the whole luminaire after conversionFluorescent and LED light source conversions provided

GBP 230.12
1

Advanced MxPro MXP-542 24VDC - 24VDC Convertor Isolator

Advanced MxPro MXP-542 24VDC - 24VDC Convertor Isolator

Advanced MxPro MXP-542 24VDC - 24VDC Convertor IsolatorA 24VDC - 24VDC Convertor Isolator for use with Mxp-631 Fib.The Mxp-631 media converters are equipped with a multiple interface circuit that can handle RS-232 or RS-422485 serial interfaces and multi-mode or single-mode fiber. Mxp-631 converters are used to extend serial transmission up to 5km Mxp-631-MM with multi-mode fiber or up to 40km Mxp-631-SM with single-mode fiber. The Mxp-631 converters can be configured to convert either RS-232 signals or RS422485 signals but not both at the same time.The Mxp-631 converters can automatically detect the serial baudrate. This is an extremely convenient feature. Even if a devices baudrate is changed the signal will still be transmitted through the media converter without any data loss.The Mxp-631 converters can be used to connect serial devices to a fiber ring. To form the ring connect to the Tx port of one Mxp-631 to the Rx port of a neighbouring converter. Once the ring is set up simply use the DIP switches to configure the Mxp-631 converters for ring mode. When one node transmits a signal the signal travels around the ring until it returns back to the transmitting unit which then blocks the signal. With the Mxp-631 you can set up fiber rings that have a total circumference of up to 100km.ADDC is a patented hardware data flow solution to handle RS-485 data direction control. ADDC senses and controls RS-485 data direction automatically making it unnecessary to use the hand shaking signal.Key FeaturesExtends RS-232422485 transmission up to40 km with single-mode - Mxp-631-SM5 km with multi-mode - Mxp-631-MMCompact sizeProtects against electrical interference and chemical corrosionSupports baudrates of 50 bps to 921.6 KbpsWide temperature models available -40 to 75CPlease note this way of communication is not EN54 approved.

GBP 129.11
1