754 results (0,23157 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Advanced ExGo 2 Way Relay Output Card - EXP-007

Advanced ExGo 2 Way Relay Output Card - EXP-007

Advanced ExGo 2 Way Relay Output Card - EXP-007The 2 or 8 Way Relay Output Card is an internal peripheral for use with The ExGo series control panels and status indicators. This additional PCB provides a cost effective solution to providing 2 or 8 individually programmable 1 Amp rated volt free clean contact outputs. The 2 or 8 Way Relay Output Card connects directly to the panels motherboard in which each output can be individually programmed. Ideal for any application where a number of programmable outputs are required at the panel. The features of the 2 or 8 Way Relay Output Card not only aid commissioning and cut down on expensive ancillary hardware but also allow the system to be easily configured to provide additional outputs for the more complex cause and effect configurations using standard products.Key Features2 Individual Programmable OutputsFast Instant ResponseEach Output 30V ACDC 1 Amp RatingCost effective against ancillary hardware

GBP 120.76
1

Advanced ExGo 8 Way Relay Output Card - EXP-008

Advanced ExGo 8 Way Relay Output Card - EXP-008

Advanced ExGo 8 Way Relay Output Card - EXP-008The 2 or 8 Way Relay Output Card is an internal peripheral for use with The ExGo series control panels and status indicators. This additional PCB provides a cost effective solution to providing 2 or 8 individually programmable 1 Amp rated volt free clean contact outputs.The 2 or 8 Way Relay Output Card connects directly to thepanels motherboard in which each outputcan be individually programmed.Ideal for any application where a number of programmable outputs are required at the panel. The features of the 2 or 8 Way Relay Output Card not only aid commissioning and cut down on expensive ancillary hardware but also allow the system to be easily configured to provide additional outputs for the more complex cause and effect configurations using standard products.Key Features2 or 8 individual programmable outputsEach output individually programmableFast responseEach output 30V ACDC 1 Amp ratingCost effective against ancillary hardwareOptional fail-safe setupEasily programmable by on board keypadPlease Note This is to be used with theAdvanced EX-3001 ExGo Three Zone Automatic Gas Extinguishing Panel only.

GBP 258.78
1

Advanced MXP-052-DIN Mimic Driven 10-Way Relay Output Card in Din-Rail Carrier

Advanced MXP-052-DIN Mimic Driven 10-Way Relay Output Card in Din-Rail Carrier

Advanced MXP-052-DIN Mimic Driven 10-Way Relay Output Card in Din-Rail CarrierThe Peripheral Relay Card provides 10 30V DC 1A programmable relay outputs.The Peripheral Relay Card connects directly to any of the DIL connectors of either the Network Mimic 100 LED Output Card or the Multi way InputOutput Card unit via the supplied ribbon cable.Each output follows the cause-and-effect programming of the mimic unit output.This can be either a simple zone output or can be an individually programmed output group rule utilising the full range of features of the MxPro5 Dynamic zoning facilities.Key FeaturesTen change-over contacts outputs at 30Vdc 1ADIN rail fixingSeparate isolate input disables all outputsSeparate isolate indication outputFast response

GBP 149.43
1

Advanced ExGo 8-Way Relay Output Card for use with EX-3001 only Fitted EXP-008F

Advanced ExGo 8-Way Relay Output Card for use with EX-3001 only Fitted EXP-008F

8-Way Relay Output Card for use with EX-3001 only Fitted EXP-008FThe 2 or 8 Way Relay Output Card is an internal peripheral for use with The ExGo series control panels and status indicators. This additional PCB provides a cost effective solution to providing 2 or 8 individually programmable 1 Amp rated volt free clean contact outputs.The 2 or 8 Way Relay Output Card connects directly to thepanels motherboard in which each outputcan be individually programmed.Ideal for any application where a number of programmable outputs are required at the panel. The features of the 2 or 8 Way Relay Output Card not only aid commissioning and cut down on expensive ancillary hardware but also allow the system to be easily configured to provide additional outputs for the more complex cause and effect configurations using standard products.Key Features2 or 8 individual programmable outputsEach output individually programmableFast responseEach output 30V ACDC 1 Amp ratingCost effective against ancillary hardwareOptional fail-safe setupEasily programmable by on board keypadPlease Note This is to be used with theAdvancedEX-3001ExGo Three Zone Automatic Gas Extinguishing Panel only.

GBP 258.78
1

Advanced MXP-507 2-Way Relay Card MxPro 5

Advanced MXP-507 2-Way Relay Card MxPro 5

Advanced MXP-507 2-Way Relay Card MxPro 5The 2-Way Programmable Relay Card2-Way Relay Output Card is an internal peripheral for use with MxPro 5 series control panels.This additional PCB provides a cost-effective solution to providing 2 individually programmable 1 Amp rated volt free change over contacts.The 2-Way Programmable Relay Cardconnects directly to the panels motherboard in which each output can be individually assigned to an output group to provide full support for dynamic zoning.ApplicationsIdeal for any application where a number of programmable outputs are required at the panel e.g. landlordtenant interfaces.The system can to be easily configured to provide additional outputs for the more complex cause and effect configurations using standard products.Key FeaturesEach output individually programmableOptional fail-safe setupAllow investigation delaysCan silence optionInstant response timeCost effective against ancillary hardwareEach output 30V ACDC 1 Amp rating3 year warranty as standard

GBP 118.54
1

Advanced MxPro 5 MXP-507F 2-Way Relay Card Fitted

Advanced MxPro 5 MXP-507F 2-Way Relay Card Fitted

Advanced MxPro 5 MXP-507F 2-Way Relay Card FittedThe 2-Way Programmable Relay Card2-Way Relay Output Card is an internal peripheral for use with MxPro 5 series control panels.This additional PCB provides a cost-effective solution to providing 2 individually programmable 1 Amp rated volt free change over contacts.The 2-Way Programmable Relay Cardconnects directly to the panels motherboard in which each output can be individually assigned to an output group to provide full support for dynamic zoning.ApplicationsIdeal for any application where a number of programmable outputs are required at the panel e.g. landlordtenant interfaces.The system can to be easily configured to provide additional outputs for the more complex cause and effect configurations using standard products.Key FeaturesEach output individually programmableOptional fail-safe setupAllow investigation delaysCan silence optionInstant response timeCost effective against ancillary hardwareEach output 30V ACDC 1 Amp rating3-year warranty as standard

GBP 118.54
1

Advanced MxPro 10 Way Mimic Relay Card - Mxp-052

Advanced MxPro 10 Way Mimic Relay Card - Mxp-052

Advanced MxPro 10 Way Mimic Relay Card - Mxp-052The Mxp-052 is a peripheral relay card providing ten 30V DC 1A programmable relay outputs. The Mxp-052 connects directly to any of the DIL connectors of either the Network Mimic Mxp-020-100 LED Output Card or the General IO controller Mxp-045 LED Output Card units via the supplied ribbon cable.Each output follows the cause and effect programming of the mimic unit output. This can be either a simple zone output or can be an individually programmed output group rule utilising the full range of features of the Mx-40005000 systems Dynamix zoning facilities.Key FeaturesTen change-over contact outputs rated at 30V DC 1A.Up to 200 individual relay outputs fully programmable per mimic excluding LEDsTen individually programmable relay outputs per unitDIN rail or screw fixing optionsSeparate isolate input disables all outputsSeparate isolate indication outputFast instant responseProduct CodesDescriptionMXP-052Mimic driven 10-way relay output cardMXP-052-DINMimic driven 10-way relay output card in din-rail carrier

GBP 129.16
1

Advanced MXP-034 Peripheral Bus - 4-Way Sounder Card

Advanced MXP-034 Peripheral Bus - 4-Way Sounder Card

Advanced MXP-034 Peripheral Bus - 4-Way Sounder CardThe Programmable 4-Way Sounder Card is an optional peripheral unit that provides four individually programmable and monitored sounder output circuits compliant with BSEN54-2 1998 Clause 7.8.Up to 16 Cards can be connected to a multi-loop panel providing a maximum of 64 additional local sounder outputs.Each output is fully programmable using the powerful DynamiX Cause and Effect rules and all outputs are synchronised. The unit is available as either a printed circuit card only or as a boxed version with integral 4A power supply.Key Features4 Way Programmable Sounder Card16 cards max per Control panel totalling 64 1 Amp rated outputsEasily configured via PC-NET-0033 Year Warranty as standardFully SynchronisedEach output is 1A rated and monitored for open and short circuitsEach output is individually programmable using the Dynamix cause-and-effects rulesAll outputs can be synchronised in pulsing modesUp to 16 cards can be connected giving a total of 64 additional outputsEach output may be individually programmed

GBP 314.51
1

Advanced MxPro MXP-035F Peripheral Bus - 4-Way Relay Card Fitted

Advanced MxPro MXP-035F Peripheral Bus - 4-Way Relay Card Fitted

Advanced MxPro MXP-035F Peripheral Bus - 4-Way Relay Card FittedThe Programmable 4-Way Relay Card is an optional peripheral unit that provides four individually programmable relay output circuits.Up to 16 cards can be connected to a multi-loop control panel providing a maximum of up to 64 additional local relay outputs.Each output is fully programmable using the powerful dynamic cause-and-effects rules and all outputs are synchronised. The unit is available as either a printed circuit card only or as a boxed version with integral 1A power supply.Applications Limitations Plant control and signalling outputs. Each output can be assigned to an individual output group and is fully programmable for any output function allowed within the MxPro 4 configuration program.Fitting of the Programmable 4-Way Relay Cardin a panel precludes fitting of other panel option cards. Requires installation of the Peripheral Bus Interface Card in the panel when using the MxPro 4 series.Key FeaturesEach output is 230V 5A ratedEach output is individually programmable with any of the available DynamiX cause-and-effect rulesUp to 16 cards can be connected providing a total of 64 additional outputsEach output may be individually programmedAn input is provided to monitor the fault output from a power supply.4-way programmable relay cardEasily configured via PC-NET-0033-year warranty as standard

GBP 279.74
1

Advanced MXP-020-100 100 Way Remote LED Mimic Driver Un-Boxed

Advanced MXP-020-100 100 Way Remote LED Mimic Driver Un-Boxed

Advanced MXP-020-100 100 Way Remote LED Mimic Driver Un-BoxedThe MXP-020-100 is a 100 way programmable remote LED Mimic Driver.The Mimic Controller provides a convenient and cost effective solution to any system that requires supplementary graphical indication of the installation via LED technology.These units unlike a panel mounted LED array which to be meaningful must also have a printed lookup table or picture adjacent to the panel provide an unambiguous graphical representation of the actual zones in fire.The unit can be mounted either internally in a multi-loop control panel or alternatively in a bespoke remote enclosure. Each unit comprises a graphical representation of the installation together with a programmable mimic driver card and LED indicators. The mimic diagram is copied from a standard CAD drawing provided by the client and the finished unit is supplied pre-wired and ready to power-up.Key Features100 programmable LED driver outputs for energising and providingLED indicationExpandable to 200 by installation of an expansion cardSupports the connectivity of 10 Way Relay Output CardLarge full colour graphical indication for site maps building layouts or simply zonal indication.Can be located remotely by simply adding the type of mimic interface onto the Ad-NetAd-NeT NetworkSupplementary graphical indicationZonal or fully programmable LED optionFully networkableFull colour mimic option3 year warranty as standard

GBP 805.42
1

Advanced 50 Way Network IO Controller MXP-045

Advanced 50 Way Network IO Controller MXP-045

50 Way Network IO ControllerMXP-045The MXP-045 provides a convenient and cost-effective solution where multiple inputs and outputs are required. It is ideally suited for building control functions such as damper fan control or sprinkler control where OnOffAuto control and healthyfault or openclosed status indication is required.The inputs can be configured as toggle switch or momentary push-button types. The outputs are fully programmable using the powerful DynamiX cause and effects rules for output groups 1-50.In addition to the 50 IO circuits dedicated inputs and outputs are also provided. Status outputs include General Fire Fault Disablement and Test. A buzzer is also provided for audible annunciation of status changes. Inputs include Buzzer Mute Momentary input enable reset and LED Test.The 50-Way Network IO controller is a stand-alone unit withwithout its own EN54-4 power supply and charger. Each input and output on the card is fully programmable using a PC.An additional 100 LED outputs can be provided using the 100-way driver card output groups 101-200.Key Features50 Inputs Outputs availableSupplementary Graphical IndicationZonal or Fully Programmable LED Option3 Year Warranty as standardFully NetworkableFull Colour Mimic Option

GBP 805.42
1

Advanced MxPro MXP-035-BXP Peripheral Bus - 4-Way Relay Card with 1.5A PSU Boxed

Advanced MxPro MXP-035-BXP Peripheral Bus - 4-Way Relay Card with 1.5A PSU Boxed

Advanced MxPro MXP-035-BXP Peripheral Bus - 4-Way Relay Card with 1.5A PSU BoxedThe Programmable 4-Way Relay Card is an optional peripheral unit that provides four individually programmable relay output circuits.Up to 16 cards can be connected to a multi-loop control panel providing a maximum of up to 64 additional local relay outputs.Each output is fully programmable using the powerful dynamic cause-and-effects rules and all outputs are synchronised. The unit is available as either a printed circuit card only or as a boxed version with integral 1A power supply.Applications Limitations Plant control and signalling outputs. Each output can be assigned to an individual output group and is fully programmable for any output function allowed within the MxPro 4 configuration program.Fitting of the Programmable 4-Way Relay Cardin a panel precludes fitting of other panel option cards. Requires installation of the Peripheral Bus Interface Card in the panel when using the MxPro 4 series.Key FeaturesEach output is 230V 5A ratedEach output is individually programmable with any of the available DynamiX cause-and-effect rulesUp to 16 cards can be connected providing a total of 64 additional outputsEach output may be individually programmedAn input is provided to monitor the fault output from a power supply.4-way programmable relay cardEasily configured via PC-NET-0033-year warranty as standard

GBP 466.21
1

Advanced MxPro5 MXP-544 P-BUS 8-Way Relay Card

Advanced MxPro5 MXP-544 P-BUS 8-Way Relay Card

Advanced MxPro5 MXP-544 P-BUS 8-Way Relay CardThe MXP-544 Peripheral 8-Way Relay Card is an internal module intended for use with the Mx-5000 range of fire alarm control panels.Each card provides 8 configurable relay outputs 2 x FORM C 6 x FORM A. Up to 16 cards may be connected to a panel allowing for an extra 128 relay outputs SELV.The MXP-544 is configured using a positive action sequence involving the on-board push button and LED indicators.This allows the module to be safely configuredinspected while adding an extra reporting capability not previously available to peripheral modules. Cards are protocol independent.Key FeaturesPowered from CIE on local PSUProvides 8 configurable relay outputsUp to 16 cards can be connected to the peripheral bus 128 relays

GBP 318.44
1

Advanced MXP-020-100FT Fault Tolerant 100 Way Remote LED Mimic Driver Un-Boxed

Advanced MXP-020-100FT Fault Tolerant 100 Way Remote LED Mimic Driver Un-Boxed

Advanced MXP-020-100FT Fault Tolerant 100 Way Remote LED Mimic Driver Un-BoxedThe Mimic Controller provides a convenient and cost-effective solution to any system that requires supplementary graphical indication of the installation via LED technology.These units unlike a panel mounted LED array which to be meaningful must also have a printed lookup table or picture adjacent to the panel provide an unambiguous graphical representation of the actual zones in fire.The unit can be mounted either internally in an MxPro 5 multi-loop control panel or alternatively in a bespoke remote enclosure. Each unit comprises a graphical representation of the installation together with a programmable mimic driver card and LED indicators. The mimic diagram is copied from a standard CAD drawing provided by the client and the finished unit is supplied pre-wired and ready to power-up.Applications LimitationsThe 100 Way Network Mimic Controller is a stand-alone unit with without its own EN54-4 power supply and charger. Each output on the card is fully programmable using a PC programming suite.Key Features100 programmable LED driver outputs for energising and providing LED indicationExpandable to 200 by installation of an expansion cardSupports the connectivity of 10 Way Relay Output CardLarge full colour graphical indication for site maps building layouts or simply zonal indicationCan be located remotely by simply adding the type of mimic interface onto the Ad-NetAd-NeT NetworkSupplementary graphical indicationZonal or fully programmable LED optionFully networkableFull colour mimic option3-year warranty as standard

GBP 1416.31
1

Advanced MxPro5 MXP-544F P-BUS 8-Way Relay Card Fitted

Advanced MxPro5 MXP-544F P-BUS 8-Way Relay Card Fitted

Advanced MxPro 5 MXP-544F P-BUS 8-Way Relay Card FittedThe MXP-544 Peripheral 8-Way Relay Card is an internal module intended for use with the Mx-5000 range of fire alarm control panels.Each card provides 8 configurable relay outputs 2 x FORM C 6 x FORM A. Up to 16 cards may be connected to a panel allowing for an extra 128 relay outputs SELV.The MXP-544 is configured using a positive action sequence involving the on-board push button and LED indicators.This allows the module to be safely configuredinspected while adding an extra reporting capability not previously available to peripheral modules. Cards are protocol independent.Key FeaturesPowered from CIE on local PSUProvides 8 configurable relay outputsUp to 16 cards can be connected to the peripheral bus 128 relays

GBP 318.44
1

Advanced MxPro 5 MXP-537F 10-way Switch Input Card Fitted

Advanced MxPro 5 MXP-537F 10-way Switch Input Card Fitted

Advanced MxPro 5 MXP-537F 10-way Switch Input Card FittedThe Programmable 10 Way Programmable Monitored Input Card is an optional peripheral unit that provides 10 individually programmable monitored switch inputs.Up to 16 cards can be connected to an MxPro 5 series panel providing a maximum of up to 160 additional monitored inputs.Each input is fully programmable using the powerful dynamic cause-and-effect rules.The unit is available as either a printed circuit card only.Applications LimitationsEN54-18 approved switch monitor circuit.Key FeaturesEach input is monitored for open and short circuit.Each input is individually programmable for Fire Fault Alarm etc.Up to 16 cards can be connected providing a total of 160 additional switch inputs.Easily configured via PC-NET-0033-year warranty as standard

GBP 407.75
1

Advanced MxPro 5 MXP-537 P-BUS 10-Way Switch Input Card

Advanced MxPro 5 MXP-537 P-BUS 10-Way Switch Input Card

Advanced MxPro 5 MXP-537 P-BUS 10-Way Switch Input CardThe Programmable 10 Way Input Card is an optional peripheral unit that provides ten individually programmable monitored switch inputs. Up to 16 cards can be connected to an MxPro 5 series panel providing a maximum of up to 160 additional monitored inputs. Each input is fully programmable using the powerful dynamic cause-and-effect rules. The unit is available as either a printed circuit card only or as a boxed unit.Applications LimitationsEN54-18 approved switch monitor circuit.Key FeaturesEach input is monitored for open and short circuit.Each input is individually programmable for Fire Fault Alarm etc.Up to 16 cards can be connected providing a total of 160 additional switch inputs.Easily configured via PC-NET-0033 year warranty as standard

GBP 407.75
1