611 resultater (0,27058 sekunder)

Vis alle filtre

Merke

Vis alle

Farge

Butikk

Pris (EUR)

Nullstill filter

Produkter
Fra
Butikker

Ubiquiti UDM-Pro-Max Dream Machine Pro Max - Nettverksutstyr

Ubiquiti UDM-Pro-Max Dream Machine Pro Max - Nettverksutstyr

10 Gbps Cloud Gateway with 200+ UniFi device / 2,000+ client support, 5 Gbps IPS routing, and redundant NVR storage, Enhanced computing power and memory for 2x the UniFi device and client capacity of Dream Machine Pro/SE, Includes full UniFi application suite for device management, 5 Gbps routing with IDS/IPS, (1) 10G SFP+*, (8) GbE RJ45 LAN ports, (1) 10G SFP+*, (1) 2.5 GbE RJ45 WAN ports, (2) 3.5" NVR HDD bays with RAID data protection, Built-in 128 GB SSD for NVR detection recordings, 1.3" touchscreen

NOK 7998.00
1

Rems Press ring M 76.1 XL (PR-3S) - Verktoey for roerleggerarbeid

Rems Press ring M 76.1 XL (PR-3S) - Verktoey for roerleggerarbeid

REMS pressing ringsHigh compression pressing rings in forged and specially hardened steel. Pressing contours of REMS pressing rings are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing segments manufactured on CNC production centres ensure high-precision machining of pressing contour. Hence far closer tolerances compared to as cast pressing contour.Traceability according to EN 1775:2007 REMS pressing tongs/pressing rings with pressing contour M have worked a specific marking into the pressing contour which leaves a lasting impression on the pressed fitting after the pressing process. This enables the user to check again whether the most suitable pressing tongs or the suitable pressing ring have been used to make the pressfit connection even after the pressing process.With this tracability REMS fulfills the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

NOK 16898.00
1

Rems Crimping pliers Mini HEz 40 578572 - Verktoey for roerleggerarbeid

Rems Crimping pliers Mini HEz 40 578572 - Verktoey for roerleggerarbeid

High compression pressing tongs/pressing rings in forged and specially hardened steel. Pressing contours of REMS pressing tongs/pressing rings are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour.Drive through REMS Mini-Press ACC & REMS Mini-Press 22V ACC drive units. Read and follow the installation and assembly instructions of the system provider/manufacturer.

NOK 4893.00
1

Beurer Epilator IPL 8500 Velvet Skin Pro - EpilatorIPL

Beurer Epilator IPL 8500 Velvet Skin Pro - EpilatorIPL

Light area of ??3.1 cm2 2-in-1 skin type and contact sensor UV filter AUTO-FLASH function 3 energy levels Up to 200,000 light pulses Get ready for summer now! With this IPL machine, it only takes about 20 minutes to treat the whole body. The device is compact and therefore easy to handle on smaller areas such as the face. The device is dermatologically tested and is 100% suitable for home use. After just 3-4 treatments, up to 50% hair reduction is experienced in the treated area. This IPL machine has an AUTO-FLASH function, which provides a faster and more convenient treatment, as you don't have to trigger the light pulse every time you move the device to a new area. This function is extremely well suited for larger areas to be treated, such as the legs.

NOK 4813.00
1

Lenco IKARAO-X1 Karaoke speaker - Musikkinstrumenter DJ utstyr

Lenco IKARAO-X1 Karaoke speaker - Musikkinstrumenter DJ utstyr

Perfect Karaoke Partner: Truly compact all-in-one karaoke machine with screen and two wireless microphones. Mics are embedded for easy storage and can self-charge, ready to use without pairing. A karaoke speaker that even seniors can easily use. Built-in battery for easy portability to any scene, such as yard, church, etc. 13.3" Karaoke Screen Displays Lyrics: The best choice for professional karaoke machine for adults. Share unlimited songs from YouTube with friends, without occupying phones or iPads. The 180° rotatable touchscreen ensures an optimal karaoke lyric-viewing experience for your friends. Excellent Karaoke Sound And Bass: Exclusive technology reduces distortion caused by bluetooth speaker resonance, enhances bass, and provides purer, clearer sound. Professional microphones with KTV tuning function enhance your singing voice. Break X1 karaoke machine Compact but powerful (peak power 800 watts), providing 8hs of karaoke system battery life and 30hs of Karaoke microphone battery life. Portable Meets Comfort: The all-in-one convenient design and built-in unique strap make the Karaoke speaker easily portable to any gathering, starting the party whenever, wherever. Exceptional Standby: Our device features an extended battery life of 10 hours, allowing you to stay immersed in your favorite tunes throughout the day. The fun doesn't have to stop, keep your essentials powered up on the go with the built-in power bank.

NOK 9499.00
1

Hurom LS H320N - Black - Saftpresse

Hurom LS H320N - Black - Saftpresse

With the Hurom H320N slow juicer, you can now experience a revolutionary way to enjoy freshly squeezed juice - even in your own home. This advanced slow juicer is designed to retain maximum flavor, nutrition and enzymes from fruits and vegetables. When it comes to the yield of fruit and vegetables, the Hurom H320N has an efficiency of up to 70%. In addition, the juice is filtered and is perfect if you do not want pulp in your juice. How to use it The Hurom H320N can grind and press whole fruits and vegetables, so you don't have to cut everything into smaller pieces. The machine's 2 liter container is filled with fruit and vegetables, the lid is closed and it does the rest of the work. After a short time you have a glass of freshly squeezed juice - easy and simple. With its stylish and compact design, the Hurom H320N fits perfectly into any modern kitchen. With quiet operation and easy cleaning, this slow juicer makes it easy and convenient to make healthy and tasty juices every day. Cleaning You will find that the Hurom H320N is incredibly easy to clean and takes no more than 2 minutes. Rinse the parts under running water and scrub with the supplied brush, which quickly cleans the filter. The pulp outlet can be opened so that all pulp residues can be washed away without any problems. Clean the machine immediately after use, as this prevents fruit and vegetable residues from sticking. NOTE: The Hurom H320N parts must not be put in the dishwasher

NOK 6818.00
1

Rems Pressing pliers HEz 40 571904 - Verktoey for roerleggerarbeid

Rems Pressing pliers HEz 40 571904 - Verktoey for roerleggerarbeid

High compression pressing tongs/pressing rings in forged and specially hardened steel. Pressing contours of REMS pressing tongs/pressing rings are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour.Drive through all REMS radial presses (except REMS Mini-Press ACC) and suitable radial presses of other makes. Read and follow the installation and assembly instructions of the system provider/manufacturer.

NOK 5146.00
1

Rems Pressing pliers HE 32 - Verktoey for roerleggerarbeid

Rems Pressing pliers HE 32 - Verktoey for roerleggerarbeid

REMS pressing tongs High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour. Hence far closer tolerances compared to as cast pressing contour.Drive through all REMS radial presses (except REMS Mini-Press ACC) and suitable radial presses of other makes. Read and follow the installation and assembly instructions of the system provider/manufacturer.

NOK 5050.00
1

Danfoss floor heating manifold 11+11 SSM with flowmeter - Gulvvarme

Danfoss floor heating manifold 11+11 SSM with flowmeter - Gulvvarme

Danfoss SSM underfloor heating manifold in stainless steel with output for 11 heating circuits and flow meters. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is with a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

NOK 7817.00
1

Danfoss floor heating manifold 12+12 SSM with flowmeter - Gulvvarme

Danfoss floor heating manifold 12+12 SSM with flowmeter - Gulvvarme

Danfoss SSM underfloor heating manifold in stainless steel with output for 12 heating circuits and flow meters. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is with a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

NOK 8603.00
1

Rems Pliers V42 570165 - Verktoey for roerleggerarbeid

Rems Pliers V42 570165 - Verktoey for roerleggerarbeid

REMS pressing tongs High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour. Hence far closer tolerances compared to as cast pressing contour.Drive through all REMS radial presses (except REMS Mini-Press ACC) and suitable radial presses of other makes. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs/pressing rings with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the pressed fitting after the pressing process. This enables the user to check again whether the most suitable pressing tongs or the suitable pressing ring have been used to make the pressfit connection even after the pressing process.With this tracability REMS fulfills the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

NOK 5196.00
1

Rems Pliers M54 570170 - Verktoey for roerleggerarbeid

Rems Pliers M54 570170 - Verktoey for roerleggerarbeid

REMS pressing tongs High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour. Hence far closer tolerances compared to as cast pressing contour.Drive through all REMS radial presses (except REMS Mini-Press ACC) and suitable radial presses of other makes. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs/pressing rings with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the pressed fitting after the pressing process. This enables the user to check again whether the most suitable pressing tongs or the suitable pressing ring have been used to make the pressfit connection even after the pressing process.With this tracability REMS fulfills the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

NOK 7159.00
1

Rems Pliers M42 570160 - Verktoey for roerleggerarbeid

Rems Pliers M42 570160 - Verktoey for roerleggerarbeid

REMS pressing tongs High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour. Hence far closer tolerances compared to as cast pressing contour.Drive through all REMS radial presses (except REMS Mini-Press ACC) and suitable radial presses of other makes. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs/pressing rings with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the pressed fitting after the pressing process. This enables the user to check again whether the most suitable pressing tongs or the suitable pressing ring have been used to make the pressfit connection even after the pressing process.With this tracability REMS fulfills the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

NOK 7069.00
1

LaCie 2big RAID - 48 TB - Harddisk array

LaCie 2big RAID - 48 TB - Harddisk array

Fast Performance: Speeds of up to 550 MB/s enable fast large-file transfers and seamless 4K video editing, Loads of Capacity: Offering up to 48 TB of storage for large-scale projects and long-term archiving, Hot-Swappable Drives: Easily remove and replace drives while 2big is still operating, Simple RAID Configuration: New to RAID? LaCie Toolkit offers step-by-step assistance with setup. For the best speeds and capacity, choose RAID 0. For data redundancy, choose RAID 1, Interface: USB 3.2 Gen 2 (up to 10 Gb/s) USB-C Works With USB-C host: USB4, USB 3.0, Thunderbolt 4 and Thunderbolt 3, Works with iPad: Connect your LaCie drive with USB-C.

NOK 20767.00
1

Sage Dual Boiler - Kaffe Espresso

Sage Dual Boiler - Kaffe Espresso

Espresso machine, 2200 watts, 15 bar, water tank capacity: 2.5 liters, pressure relief valve, start-up timer, dual boilers, dual PID control, Low pressure 'Pre-infusion' - programmable for both duration and% pressure, Separate hot water outlet for e.g. . tea water etc., silver The boiler, for the espresso shot, is PID temperature controlled, while a separate steam boiler offers instant and powerful steam on demand. So you can extract your shot at the right temperature, delivering optimal flavor, while simultaneously steaming your milk to cafe quality. PRECISE AND REPEATABLE EXTRACTION: Dual stainless steel boilers and heated group head controlled by digital temperature control (PID) brings water to precisely the right temperature (+/- 1?C) to extract maximum flavor potential, shot after shot. MICRO-FOAM MILK TEXTURING: Steam wand, powered by a dedicated boiler, delivers micro-foam texture of commercial machines that enhances flavor and is essential for creating latte art. LCD DISPLAY: Allows easy programming and has a shot clock for timing the extraction. FLEXIBLE SHOT CONTROL: Choose between one shot, two shots or manual control over how much espresso ends up in your cup for the perfect dose every time.

NOK 15815.00
1

Samsung Galaxy XCover7 - 5-Slot Charger with Spare Battery Slot - Black - Mobil Andre tilbehoer

Samsung Galaxy XCover7 - 5-Slot Charger with Spare Battery Slot - Black - Mobil Andre tilbehoer

KOAMTAC chargers are a safe and easy way to charge your devices to ensure your entire team is powered throughout the day. Our chargers take up minimal counter space and help your team quickly swap batteries with less wires and clutter. The Samsung Galaxy XCover7 Charging Cradles from KOAMTAC can help to quickly and safely charge your device. The 5-slot charging cradle creates a simple charging dock to drop the rugged phone into for fast and secure charging via pogo pins.

NOK 6338.00
1