102 resultater (0,21798 sekunder)

Vis alle filtre

Merke

Farge

Butikk

Pris (EUR)

Vis alle

Nullstill filter

Produkter
Fra
Butikker

Rems Accu-Press ACC 22V - Verktoey for roerleggerarbeid

Rems Accu-Press ACC 22V - Verktoey for roerleggerarbeid

REMS Akku-Press 22 V ACC Basic-Pack Electro-hydraulic battery radial press with automatic return and press pressure monitoring for the production of press joints for all common press fitting systems. Li-Ion 22 V Technology. Pipe press joints Ø 10 - 108 (110) mm, Ø 3/8 - 4" "M" press 12 - 54 mm With automatic return and press pressure monitoring. Anti-vibration system. Safe pressing result in a few seconds. Automatic locking of the press bar. Battery Li-Ion 21.6 V, 2.5 Ah for approx. 200 presses of Viega Profi press DN 15 per battery charging. For operation of REMS press bars/press rings and for suitable press bars/press rings of other makes. Rotatable press bar attachment with automatic lock. Electro-hydraulic drive with powerful battery motor 21.6 V, 380 W. Anti-vibration system. Safety switch. LED work lamp. Battery Li-Ion 21.6 V, 2.5 Ah, fast charger Li-Ion 230 V, 50 - 60 Hz, 90 W

NOK 29888.00
1

Rems Accu-press ACC Li-ion 14.4V - Verktoey for roerleggerarbeid

Rems Accu-press ACC Li-ion 14.4V - Verktoey for roerleggerarbeid

Universal, handy electric tool with automatic circuit control for producing pipe pressing joints for all common pressfitting systems. For battery and corded operation. Pressing joints Ø 10-108 mm / 3/8 - 4. Complete range of REMS pressing tongs/pressing rings for all common pressfitting systems.REMS Akku-Press ACC Li-Ion - universal up to Ø 108 mm / 4.With automatic circuit control and electronic service control. Secure crimping in seconds. Automatic locking of pressing tongs

NOK 17259.00
1

Rems Mini-press ACC Li-ion 14.4V - Verktoey for roerleggerarbeid

Rems Mini-press ACC Li-ion 14.4V - Verktoey for roerleggerarbeid

Universal, super handy electric tool with automatic circuit control for producing pipe pressing joints for all common pressfitting systems. For battery and corded operation. Pipe pressing joints Ø 10-40 mm, 3/8 - 1 1/4. REMS pressing tongs Mini. REMS Mini-Press ACC - universal up to Ø 40 mm / 1 1/4.Super light, super small, super handy. With automatic circuit control. Secure crimping in seconds. Automatic locking of pressing tongs. Assortment of REMS pressing tongs Mini for all common pressfitting systems

NOK 13623.00
1

Rems Mini-Press 22V ACC - 578010 R220 - Verktoey for roerleggerarbeid

Rems Mini-Press 22V ACC - 578010 R220 - Verktoey for roerleggerarbeid

Universal, super handy electric tool with automatic circuit control for producing pipe pressing joints for all common pressfitting systems. For battery and corded operation. Pipe pressing joints Ø 10-40 mm, 3/8 - 1 1/4. REMS pressing tongs Mini.REMS Mini-Press ACC - universal up to Ø 40 mm / 1 1/4. Super light, super small, super handy. With automatic circuit control. Secure crimping in seconds. Automatic locking of pressing tongs. Assortment of REMS pressing tongs Mini for all common pressfitting systems

NOK 17519.00
1

Rems Mini-Press S 22V ACC Basic-Pack - Verktoey for roerleggerarbeid

Rems Mini-Press S 22V ACC Basic-Pack - Verktoey for roerleggerarbeid

Universal, super handy electric tool with automatic circuit control for producing pipe pressing joints for all common pressfitting systems. For battery and corded operation. Pipe pressing joints Ø 10-40 mm, 3/8 - 1 1/4. REMS pressing tongs Mini.REMS Mini-Press ACC - universal up to Ø 40 mm / 1 1/4. Super light, super small, super handy. With automatic circuit control. Secure crimping in seconds. Automatic locking of pressing tongs. Assortment of REMS pressing tongs Mini for all common pressfitting systems

NOK 21040.00
1

Rems Press pliers V28 - Verktoey for roerleggerarbeid

Rems Press pliers V28 - Verktoey for roerleggerarbeid

REMS pressing tongs High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour. Hence far closer tolerances compared to as cast pressing contour.Drive through all REMS radial presses (except REMS Mini-Press ACC) and suitable radial presses of other makes. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs/pressing rings with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the pressed fitting after the pressing process. This enables the user to check again whether the most suitable pressing tongs or the suitable pressing ring have been used to make the pressfit connection even after the pressing process.With this tracability REMS fulfills the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

NOK 1837.00
1

Rems Pipe cutting machine Cento - Verktoey for roerleggerarbeid

Rems Pipe cutting machine Cento - Verktoey for roerleggerarbeid

Light, portable compact machine. Universal for cutting and deburring pipes. For trade and industry. For the building site and the workshop.Stainless steel pipes of pressfittingsystems, carbon steel, copper Ø 8 - 108 mmSteel pipes EN 10255 (DIN 2440) DN 10 - 100 Ø 14 - 4, Ø 14 - 115 mmCast iron pipes (SML) EN 877 (DIN 19522) DN 50 - 100Plastic pipes SDR 11 Wall thickness s 10 mm Ø 10 - 110 mmMultilayer composite pipes Ø 10 - 110 mmREMS Cento - Cutting and deburring up to Ø 115 mm. Super fast. Right angled. Chip-free. No outer burr. Dry cutting. Universal for many pipe types.

NOK 20179.00
1

Rems Pliers up 16 - Verktoey for roerleggerarbeid

Rems Pliers up 16 - Verktoey for roerleggerarbeid

REMS pressing tongs High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour. Hence far closer tolerances compared to as cast pressing contour.Drive through all REMS radial presses (except REMS Mini-Press ACC) and suitable radial presses of other makes. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs/pressing rings with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the pressed fitting after the pressing process. This enables the user to check again whether the most suitable pressing tongs or the suitable pressing ring have been used to make the pressfit connection even after the pressing process.With this tracability REMS fulfills the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

NOK 2686.00
1

Rems Pressing pliers up 20 - Verktoey for roerleggerarbeid

Rems Pressing pliers up 20 - Verktoey for roerleggerarbeid

REMS pressing tongs High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour. Hence far closer tolerances compared to as cast pressing contour.Drive through all REMS radial presses (except REMS Mini-Press ACC) and suitable radial presses of other makes. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs/pressing rings with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the pressed fitting after the pressing process. This enables the user to check again whether the most suitable pressing tongs or the suitable pressing ring have been used to make the pressfit connection even after the pressing process.With this tracability REMS fulfills the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

NOK 2533.00
1

Rems Pressing pliers up 25 - Verktoey for roerleggerarbeid

Rems Pressing pliers up 25 - Verktoey for roerleggerarbeid

REMS pressing tongs High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour. Hence far closer tolerances compared to as cast pressing contour.Drive through all REMS radial presses (except REMS Mini-Press ACC) and suitable radial presses of other makes. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs/pressing rings with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the pressed fitting after the pressing process. This enables the user to check again whether the most suitable pressing tongs or the suitable pressing ring have been used to make the pressfit connection even after the pressing process.With this tracability REMS fulfills the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

NOK 2533.00
1

Rems Crimping pliers Mini up 20 - Verktoey for roerleggerarbeid

Rems Crimping pliers Mini up 20 - Verktoey for roerleggerarbeid

REMS pressing tongs Mini Very compact design and low weight of the REMS Mini pressing tongs due to special arrangent of the pressing tongs connection (Patent EP 1 952 948).High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour.Drive through REMS Mini-Press ACC drive unit. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs Mini with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the g after the pressing process. This enables the user to check again whether the most suitable pressing tongs have been used to make the pressfit connection even after the pressing process.With this traceability REMS fulfils the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

NOK 2391.00
1

Rems Pressing pliers Mini up 16 - Verktoey for roerleggerarbeid

Rems Pressing pliers Mini up 16 - Verktoey for roerleggerarbeid

REMS pressing tongs Mini Very compact design and low weight of the REMS Mini pressing tongs due to special arrangent of the pressing tongs connection (Patent EP 1 952 948).High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour.Drive through REMS Mini-Press ACC drive unit. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs Mini with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the g after the pressing process. This enables the user to check again whether the most suitable pressing tongs have been used to make the pressfit connection even after the pressing process.With this traceability REMS fulfils the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

NOK 2503.00
1

Rems Crimping pliers Mini up 25 - Verktoey for roerleggerarbeid

Rems Crimping pliers Mini up 25 - Verktoey for roerleggerarbeid

REMS pressing tongs Mini Very compact design and low weight of the REMS Mini pressing tongs due to special arrangent of the pressing tongs connection (Patent EP 1 952 948).High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour.Drive through REMS Mini-Press ACC drive unit. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs Mini with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the g after the pressing process. This enables the user to check again whether the most suitable pressing tongs have been used to make the pressfit connection even after the pressing process.With this traceability REMS fulfils the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

NOK 2370.00
1

Rems Crimping pliers Mini up 32 - Verktoey for roerleggerarbeid

Rems Crimping pliers Mini up 32 - Verktoey for roerleggerarbeid

REMS pressing tongs Mini Very compact design and low weight of the REMS Mini pressing tongs due to special arrangent of the pressing tongs connection (Patent EP 1 952 948).High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour.Drive through REMS Mini-Press ACC drive unit. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs Mini with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the g after the pressing process. This enables the user to check again whether the most suitable pressing tongs have been used to make the pressfit connection even after the pressing process.With this traceability REMS fulfils the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

NOK 2481.00
1

Rems Press ring M 28 S (PR-2B) - Verktoey for roerleggerarbeid

Rems Press ring M 28 S (PR-2B) - Verktoey for roerleggerarbeid

REMS pressing ringsHigh compression pressing rings in forged and specially hardened steel. Pressing contours of REMS pressing rings are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing segments manufactured on CNC production centres ensure high-precision machining of pressing contour. Hence far closer tolerances compared to as cast pressing contour.Traceability according to EN 1775:2007 REMS pressing tongs/pressing rings with pressing contour M have worked a specific marking into the pressing contour which leaves a lasting impression on the pressed fitting after the pressing process. This enables the user to check again whether the most suitable pressing tongs or the suitable pressing ring have been used to make the pressfit connection even after the pressing process.With this tracability REMS fulfills the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

NOK 1827.00
1

Rems Press ring M 22 S (PR-2B) - Verktoey for roerleggerarbeid

Rems Press ring M 22 S (PR-2B) - Verktoey for roerleggerarbeid

REMS pressing ringsHigh compression pressing rings in forged and specially hardened steel. Pressing contours of REMS pressing rings are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing segments manufactured on CNC production centres ensure high-precision machining of pressing contour. Hence far closer tolerances compared to as cast pressing contour.Traceability according to EN 1775:2007 REMS pressing tongs/pressing rings with pressing contour M have worked a specific marking into the pressing contour which leaves a lasting impression on the pressed fitting after the pressing process. This enables the user to check again whether the most suitable pressing tongs or the suitable pressing ring have been used to make the pressfit connection even after the pressing process.With this tracability REMS fulfills the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

NOK 1827.00
1

Rems Press ring M 15 S (PR-2B) - Verktoey for roerleggerarbeid

Rems Press ring M 15 S (PR-2B) - Verktoey for roerleggerarbeid

REMS pressing ringsHigh compression pressing rings in forged and specially hardened steel. Pressing contours of REMS pressing rings are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing segments manufactured on CNC production centres ensure high-precision machining of pressing contour. Hence far closer tolerances compared to as cast pressing contour.Traceability according to EN 1775:2007 REMS pressing tongs/pressing rings with pressing contour M have worked a specific marking into the pressing contour which leaves a lasting impression on the pressed fitting after the pressing process. This enables the user to check again whether the most suitable pressing tongs or the suitable pressing ring have been used to make the pressfit connection even after the pressing process.With this tracability REMS fulfills the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

NOK 1880.00
1

Rems Press ring M 35 S (PR-2B) - Verktoey for roerleggerarbeid

Rems Press ring M 35 S (PR-2B) - Verktoey for roerleggerarbeid

REMS pressing ringsHigh compression pressing rings in forged and specially hardened steel. Pressing contours of REMS pressing rings are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing segments manufactured on CNC production centres ensure high-precision machining of pressing contour. Hence far closer tolerances compared to as cast pressing contour.Traceability according to EN 1775:2007 REMS pressing tongs/pressing rings with pressing contour M have worked a specific marking into the pressing contour which leaves a lasting impression on the pressed fitting after the pressing process. This enables the user to check again whether the most suitable pressing tongs or the suitable pressing ring have been used to make the pressfit connection even after the pressing process.With this tracability REMS fulfills the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

NOK 2462.00
1

Rems Press ring M 12 S (PR-2B) - Verktoey for roerleggerarbeid

Rems Press ring M 12 S (PR-2B) - Verktoey for roerleggerarbeid

REMS pressing ringsHigh compression pressing rings in forged and specially hardened steel. Pressing contours of REMS pressing rings are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing segments manufactured on CNC production centres ensure high-precision machining of pressing contour. Hence far closer tolerances compared to as cast pressing contour.Traceability according to EN 1775:2007 REMS pressing tongs/pressing rings with pressing contour M have worked a specific marking into the pressing contour which leaves a lasting impression on the pressed fitting after the pressing process. This enables the user to check again whether the most suitable pressing tongs or the suitable pressing ring have been used to make the pressfit connection even after the pressing process.With this tracability REMS fulfills the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

NOK 2258.00
1

Rems Press ring M 76.1 XL (PR-3S) - Verktoey for roerleggerarbeid

Rems Press ring M 76.1 XL (PR-3S) - Verktoey for roerleggerarbeid

REMS pressing ringsHigh compression pressing rings in forged and specially hardened steel. Pressing contours of REMS pressing rings are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing segments manufactured on CNC production centres ensure high-precision machining of pressing contour. Hence far closer tolerances compared to as cast pressing contour.Traceability according to EN 1775:2007 REMS pressing tongs/pressing rings with pressing contour M have worked a specific marking into the pressing contour which leaves a lasting impression on the pressed fitting after the pressing process. This enables the user to check again whether the most suitable pressing tongs or the suitable pressing ring have been used to make the pressfit connection even after the pressing process.With this tracability REMS fulfills the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

NOK 16898.00
1

Rems Press ring M 18 S (PR-2B) - Verktoey for roerleggerarbeid

Rems Press ring M 18 S (PR-2B) - Verktoey for roerleggerarbeid

REMS pressing ringsHigh compression pressing rings in forged and specially hardened steel. Pressing contours of REMS pressing rings are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing segments manufactured on CNC production centres ensure high-precision machining of pressing contour. Hence far closer tolerances compared to as cast pressing contour.Traceability according to EN 1775:2007 REMS pressing tongs/pressing rings with pressing contour M have worked a specific marking into the pressing contour which leaves a lasting impression on the pressed fitting after the pressing process. This enables the user to check again whether the most suitable pressing tongs or the suitable pressing ring have been used to make the pressfit connection even after the pressing process.With this tracability REMS fulfills the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

NOK 1827.00
1

Rems Swing 12-15-18-22 soft tubes - Verktoey for roerleggerarbeid

Rems Swing 12-15-18-22 soft tubes - Verktoey for roerleggerarbeid

REMS Swing set. One-handed pipe bender Ø 10-32 mm, Ø 3/8"-7/8", up to 90°. Soft copper tubes Ø 10-22 mm, Ø 3/8-7/8", s=1mm, soft plastic coated copper tubes Ø 10-18 mm, Ø 3/8"-5/8", s = 1mm, plastic coated C-steel pipe for press fitting system Ø 12-18 mm, mild precision steel pipe Ø 10-18 mm, s=1mm, plastic pipe with metallic insert Ø 14-32 mm. Up to Ø 26 mm with bends, bend segments, universal stop with sliding pieces, in stable steel case/ case. Up to Ø 32 mm with bends, bend segments, 2 stops with sliding pieces, in stable case.

NOK 4560.00
1

Rems Tiger bayonet saw w/bracket - Verktoey for roerleggerarbeid

Rems Tiger bayonet saw w/bracket - Verktoey for roerleggerarbeid

REMS Tiger ANC VE set. Electric pipe bayonet saw with vario electronics (VE) for easy, fast, perpendicular sawing with pipe holder and for freehand sawing up to 6", 250 mm. Machine with spade handle, maintenance-free, water and dust protected oscillation drive with versatile needle bearing drive (ANC) , aggressive orbital stroke, 230 V, 1050 W, safety rocker switch. Universal saw blade holder for 2". 2 REMS special saw blades 2". In a stable steel case.

NOK 8715.00
1