153 resultater (0,20777 sekunder)

Vis alle filtre

Merke

Farge

Butikk

Pris (EUR)

Vis alle

Nullstill filter

Produkter
Fra
Butikker

Danfoss Cas145 pressure switch 4-40 bar g1/4 spdt ip67 - Varmekontroll

Danfoss Cas145 pressure switch 4-40 bar g1/4 spdt ip67 - Varmekontroll

In the CAS pressure switches series, special attention has been given to meeting demands for a high level of enclosure, low differential, robust, compact construction and resistance to shock and vibration. The CAS series covers most outdoor as well as indoor application requirements. CAS pressure switches are suitable for use in alarm and regulation systems in factories, diesel plant, compressors, power stations and on board ships. •Pressure ranges: 0 to 60 bar •Low differential (fixed) micro switch •Enclosure IP67. Sturdy and sea water resistant •Robust and compact construction •Resistance to shock and vibrations •Diaphragm version applications with: Pulsations/pressure peaks and seawater as media •Also available as differential pressure switch •Available with all relevant land and marine approvals

NOK 4318.00
1

Danfoss Mbs 3100 pressuretransmitter rel 0-10 bar 4-20ma g12 - Trykkmaaling

Danfoss Mbs 3100 pressuretransmitter rel 0-10 bar 4-20ma g12 - Trykkmaaling

MBS 3100, Compact pressure transmitters for marine applications,The compact ship approved pressure transmitter MBS 3100 is designed for use in almost all marine applications, and offers a reliable pressure measurement, even under harsh environmental conditions.The flexible pressure transmitter programme is approved according to LR, DNV, GL, RINA, ABS, BV, NKK, PRS, MRS requirements and covers a 4-20 mA output signal, absolute and gauge (relative) versions, measuring ranges from 0-1 to 0-600 bar, plug and cable connections and a wide range of pressure connections.,Excellent vibration stability, robust construction, and a high degree of EMC/EMI protection equip the pressure transmitter to meet the most stringent marine requirements.,•4 - 20 mA output signal,•Operating temperature -40 to 85° C, •Measuring range 0 - 600 bar,•Standard pressure connection G 1/4A DIN 16288, G 1/4A, O-ring DIN 3852 G 1/2A DIN 16288,•Available with all relevant marine approvals,•Suited for marine applications

NOK 3791.00
1

Danfoss Mbs 1700 pressuretransmitter rel 0-10 bar 4-20ma g12 - Behandle instrumentering

Danfoss Mbs 1700 pressuretransmitter rel 0-10 bar 4-20ma g12 - Behandle instrumentering

MBS 1700, Trykktransmitter for generelt bruk, Trykktransmitter av typen MBS 1700 er designet for en rekke applikasjoner og enkel installasjon innen distributørmarkedet. Senderen tilbyr svært pålitelig trykkmåling, slik at selv den minste endring oppdages umiddelbart., • 4 - 20 mA utgangssignal, • Måleområde 0 - 25 bar, • Trykktilkobling G1 / 4 EN837 og G12 EN837 ,• Temperaturkompensert og laser kalibrert ,• Utmerket vibrasjonsstabilitet ,• Enkel installasjon - passform og glem

NOK 1712.00
1

Danfoss Icon Master Controller OTA 24v with 15 channels - Gulvvarme

Danfoss Icon Master Controller OTA 24v with 15 channels - Gulvvarme

Danfoss Icon Master Controller 24V with 15 channels. Underfloor heating control for the Danfoss Icon series with 15 outputs for thermal actuators. Up to 15 room thermostats, wireless/wired, can be registered. The Master Controller must be combined with the Danfoss Icon radio module if wireless room thermostats are to be registered. Automatic balancing, active pump relay, function test and potential-free boiler relay are standard. It is possible to purchase the Danfoss Icon app-module which provides access to app-control of the underfloor heating system via an iOS or Android device. The app-module also provides access to online updating of the Master Controller firmware (OTA). Cooling control and demand-controlled flow temperature can be purchased using the Danfoss Icon expansion module. The Master Controller is compatible with Zigbee 3.0 systems such as Danfoss Ally or 3rd party Zigbee systems. For Zigbee integration, the Danfoss Icon Zigbee module is used, which is connected to the Master Controller's app input.

NOK 3210.00
1

Danfoss Icon Master Controller OTA 24V with 10 channels - Gulvvarme

Danfoss Icon Master Controller OTA 24V with 10 channels - Gulvvarme

Danfoss Icon Master Controller 24V with 10 channels. Underfloor heating control for the Danfoss Icon series with 10 outputs for thermal actuators. Up to 10 room thermostats, wireless/wired, can be registered. The Master Controller must be combined with the Danfoss Icon radio module if wireless room thermostats are to be registered. Automatic balancing, active pump relay, function test and potential-free boiler relay are standard. It is possible to purchase the Danfoss Icon app-module which provides access to app-control of the underfloor heating system via an iOS or Android device. The app-module also provides access to online updating of the Master Controller firmware (OTA). Cooling control and demand-controlled flow temperature can be purchased using the Danfoss Icon expansion module. The Master Controller is compatible with Zigbee 3.0 systems such as Danfoss Ally or 3rd party Zigbee systems. For Zigbee integration, the Danfoss Icon Zigbee module is used, which is connected to the Master Controller's app input.

NOK 2943.00
1

Danfoss Mbc 5100 block-type compact pressure switches - Behandle instrumentering

Danfoss Mbc 5100 block-type compact pressure switches - Behandle instrumentering

MBC pressure switches are used in marine applications where space and reliability are the most important features. MBCs are compact pressure switches, designed according to our new block design to survive in the harsh conditions known from machine rooms onboard ships.MBCs have high vibration resistance and feature all commonly marine approvals. The fixed, but low differential guarantees accurate monitoring of critical pressures. MBV test valves can be delivered as standard option for MBC pressure switches. •All relevant marine approvals •Pressure ranges: -0.2 to 400 bar •Low differential (fixed) micro switch •Resistant to shock and vibrations •Enclosure IP65 •Diaphragm version for applications with pulsations/pressure peaks •Compact design •Low installations costs •Fast and easy to operate •Easy to mount on block test valve •Available as differential pressure switch

NOK 2565.00
1

Danfoss floor heating manifold 11+11 SSM with flowmeter - Gulvvarme

Danfoss floor heating manifold 11+11 SSM with flowmeter - Gulvvarme

Danfoss SSM underfloor heating manifold in stainless steel with output for 11 heating circuits and flow meters. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is with a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

NOK 7817.00
1

Danfoss floor heating manifold 12+12 SSM with flowmeter - Gulvvarme

Danfoss floor heating manifold 12+12 SSM with flowmeter - Gulvvarme

Danfoss SSM underfloor heating manifold in stainless steel with output for 12 heating circuits and flow meters. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is with a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

NOK 8603.00
1