100 Resultaten (0,19948 seconden)

Toon alle filters

Merk

Verkoper

Prijs (EUR)

Toon alles

Reset filter

Producten
Van
Winkels

Danfoss Mbs 3100 drukzender rel 0-10 bar 4-20mA G12 - 060G1471

Danfoss Mbs 3100 drukzender rel 0-10 bar 4-20mA G12 - 060G1471

MBS 3100, Compacte drukzenders voor maritieme toepassingen, De compacte scheeps-goedgekeurde drukzender MBS 3100 is ontworpen voor gebruik in bijna alle maritieme toepassingen en biedt een betrouwbare drukmeting, zelfs onder zware omgevingsomstandigheden. Het flexibele programma van de drukzender is goedgekeurd volgens LR, DNV, GL, RINA, ABS, BV-, NKK-, PRS- en MRS-vereisten en omvat een uitgangssignaal van 4-20 mA , absolute en relatieve versies (gauge), meetbereiken van 0-1 tot 0-600 bar , plug-en-kabelverbindingen en een breed scala aan drukaansluitingen. Uitstekende trillingsstabiliteit , robuuste constructie en een hoge mate van EMC / EMI-bescherming rusten de drukzender uit om te voldoen aan de meest stringente maritieme eisen., • Uitgangssignaal: 4 -20 mA , • Bedrijfstemperatuur: -40 tot +85 ° C , • Meetbereik: 0 -600 bar ,• Standaarddrukaansluiting G1/4A DIN16288,G1/4A,O-ring DIN3852 G1/2A DIN16288.• Verkrijgbaar met alle relevante marine-goedkeuringen.• Geschikt voor maritieme toepassingen

EUR 386.66
1

Danfoss Mbs 1700 drukzender rel 0-10 bar 4-20mA G12 - 060G6105

Danfoss Mbs 1700 drukzender rel 0-10 bar 4-20mA G12 - 060G6105

MBS 1700, Druksensor voor algemeen gebruik, Druksensor type MBS 1700 is ontworpen voor een verscheidenheid aan toepassingen en eenvoudige installaties binnen de distributeurmarkt. De zender biedt zeer betrouwbare drukmeting, waardoor zelfs de kleinste verandering onmiddellijk wordt gedetecteerd., 4 - 20 mA uitgangssignaal, Meetbereik 0 - 25 bar, Drukverbinding G1/4 EN 837 en G12 EN 837, Temperatuurgecompenseerd en laser gekalibreerd ,Uitstekende trillingsstabiliteit ,Eenvoudige installatie - plaatsen en vergeten

EUR 262.01
1

Danfoss Cas145 Drukschakelaar 4-40 bar g1/4 spdt ip67 - 060-316166

Danfoss Cas145 Drukschakelaar 4-40 bar g1/4 spdt ip67 - 060-316166

In de CAS-drukschakelaarserie is speciale aandacht besteed aan het voldoen aan eisen voor een hoog niveau van behuizing, lage differentiaal, robuuste, compacte constructie en weerstand tegen schokken en trillingen. De CAS-serie dekt de meeste buiten- en binnen toepassingsvereisten. CAS-drukschakelaars zijn geschikt voor gebruik in alarm- en regelsystemen in fabrieken, dieselcentrales, compressoren, energiecentrales en aan boord van schepen. • Drukgebieden: 0 tot 60 bar • Lage differentiële (vaste) microschakelaar • Behuizing IP67. Stevig en zeewaterbestendig • Robuuste en compacte constructie • Weerstand tegen schokken en trillingen • Toepassingen met diafragmaversies: Pulsaties/drukpieken en zeewater als medium• Ook verkrijgbaar als drukverschilschakelaar• Verkrijgbaar met alle relevante land- of maritieme goedkeuringen

EUR 348.29
1

Danfoss Icon Master Controller OTA 24V with 10 channels - 088U1141

Danfoss Icon Master Controller OTA 24V with 10 channels - 088U1141

Danfoss Icon Master Controller 24V with 10 channels. Underfloor heating control for the Danfoss Icon series with 10 outputs for thermal actuators. Up to 10 room thermostats, wireless/wired, can be registered. The Master Controller must be combined with the Danfoss Icon radio module if wireless room thermostats are to be registered. Automatic balancing, active pump relay, function test and potential-free boiler relay are standard. It is possible to purchase the Danfoss Icon app-module which provides access to app-control of the underfloor heating system via an iOS or Android device. The app-module also provides access to online updating of the Master Controller firmware (OTA). Cooling control and demand-controlled flow temperature can be purchased using the Danfoss Icon expansion module. The Master Controller is compatible with Zigbee 3.0 systems such as Danfoss Ally or 3rd party Zigbee systems. For Zigbee integration, the Danfoss Icon Zigbee module is used, which is connected to the Master Controller's app input.

EUR 288.00
1

Danfoss Icon Master Controller OTA 24v with 15 channels - 088U1142

Danfoss Icon Master Controller OTA 24v with 15 channels - 088U1142

Danfoss Icon Master Controller 24V with 15 channels. Underfloor heating control for the Danfoss Icon series with 15 outputs for thermal actuators. Up to 15 room thermostats, wireless/wired, can be registered. The Master Controller must be combined with the Danfoss Icon radio module if wireless room thermostats are to be registered. Automatic balancing, active pump relay, function test and potential-free boiler relay are standard. It is possible to purchase the Danfoss Icon app-module which provides access to app-control of the underfloor heating system via an iOS or Android device. The app-module also provides access to online updating of the Master Controller firmware (OTA). Cooling control and demand-controlled flow temperature can be purchased using the Danfoss Icon expansion module. The Master Controller is compatible with Zigbee 3.0 systems such as Danfoss Ally or 3rd party Zigbee systems. For Zigbee integration, the Danfoss Icon Zigbee module is used, which is connected to the Master Controller's app input.

EUR 306.51
1

Danfoss floor heating manifold 11+11 SSM with flowmeter - 088U0761

Danfoss floor heating manifold 11+11 SSM with flowmeter - 088U0761

Danfoss SSM underfloor heating manifold in stainless steel with output for 11 heating circuits and flow meters. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is with a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

EUR 638.24
1

Danfoss floor heating manifold 12+12 SSM with flowmeter - 088U0762

Danfoss floor heating manifold 12+12 SSM with flowmeter - 088U0762

Danfoss SSM underfloor heating manifold in stainless steel with output for 12 heating circuits and flow meters. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is with a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

EUR 692.22
1