22 results (0,15439 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

3M 4510 Protective Coverall Type 5/6 - Large

3M 4510 Protective Coverall Type 5/6 - Large

These 3M protective coveralls provide protection against infective agents, certain hazardous dusts and limited liquid splashes. This suit features micro pores which allows heat and moisture to evaporate from the skin. The Cat III Certified 3M Protective Coverall 4510 provides Type 5 hazardous dust hold out and Type 6 splash protection against liquid splashes. The 3M protective coverall 4510 meets a variety of standards for chemical protective clothing including EN 14126 Infective agents, EN 1073-2 Nuclear particulate resistance, EN 1149, EN ISO 13688, Type 6 Liquid Splash EN 13034 and Type 5 Dust EN ISO 13982-1. Including a well covering 2 panel hood design and a 2-way zip with storm flap. An elasticated waist, cuffs and ankles ensures comfort and coverage that stays in place. The clean white material is made by laminating a polyethylene film onto a soft non-woven polypropylene base, it is ultra-low linting and resistant. The anti-static coating reduces static discharge and helps minimizes the risk of sparks and ignition. The coverall is light and soft, and micro pores allow for moisture evaporation whilst offering light chemical splash protection.

EUR 4.00
1

3M Protective Coverall 4565 Type 4/5/6 White+Red M

3M Protective Coverall 4565 Type 4/5/6 White+Red M

The 3M Protective Coverall 4565 offers CE Category III, Type 4/5/6 protection, meaning it has an impressive level of liquid barrier protection whilst maintaining its unique soft feel and well-fitting drape. It features taped seams across the suit for better protection and increased durability. Wear 3M Protective Coverall 4565 for a superior barrier to hazardous particles, limited liquid splashes and sprays to Type 4. The fresh white 3M protective coverall 4565 has recognisable red taped seams and meets a variety of standards including chemical protective clothing including EN 14126 Infective agents, EN 1073-2 Nuclear particulate resistance, EN 1149, EN ISO 13688, Type 6 Liquid Splash EN 13034 and Type 5 Dust EN ISO 13982-1. Type 4 Liquid Spray EN 14605. Taped seams reduce skin exposure points through tearing and reduced risk of inward leakage by chemicals or particles. The coverall also offers Til class 2 in Particulate Radioactive Contamination EN1073-2 meaning it has very good particle hold out as well as liquid spray resistance. It's made with a non-microporous PE laminate meaning that it offers chemical protection with permeation tested resistance against certain chemicals. Knitted cuffs, elasticated waist and ankles make the wearer more comfortable and increase freedom of movement, while the ultra-low linting material reduces environmental contamination. Its 3 panel hood design is compatible with additional PPE (Personal Protective Equipment). The 2-way zips and fully sealable storm flaps reduce the risk of skin exposure and protect from contaminants. This coverall also has an Anti-static treatment meeting EN 1149, which reduces static discharge and reduces the risk of spark and ignition. The 3M protective coverall 4565 coverall offers peace of mind about security and safety when worn, making it an essential addition to a workforce's resources.

EUR 15.73
1

3M Versaflo TR-630 Standard Battery Pack

3M Versaflo TR-630 Standard Battery Pack

For a lightweight, rechargeable battery for 3M Versaflo Powered Air Turbo TR-600 Series, use 3M Versaflo Battery, Standard, TR-630. A new, standard capacity, lithium-ion battery and a new particulate filter (TR-6710E) can provide your turbo system with 6-12 hours of use at a standard flow rate setting. System duration will vary based on battery age, filter loading, filter selection and user selected airflow setting. This battery pack charges in less than four hours and features a light-up charge level indicator. It can be rinsed or temporarily submerged in water for easy cleaning. See User Instruction for further information on system durations.

EUR 391.61
1

3M Adflo Battery Charger Li-ion

3M Adflo Battery Charger Li-ion

This is a replacement battery charger for 3M Adflo powered air purifying respirator systems and charges Adflo li-ion batteries in 4-5 hours depending on residual capacity. The Adflo battery charger is designed for fast charging of Adflo li-ion 10.8v/32Wh to 10.8v/48Wh batteries, either installed or un-installed on the Adflo. Charger can show up to seven battery states: 1) Standby, permanent yellow 2) Pre-charge, flashing slowly 3) Waiting for correct temperature, yellow and green alternatively 4) Rapid charge, green flashing fast 5) Maintenance charge, green flashing slow 6) Battery charged, permanent green 7) Error, yellow flashing fast. Smart charging will not allow overcharge and prevent damage to the batteries.

EUR 186.30
1

3M Protective Coverall XL

3M Protective Coverall XL

These 3M protective coveralls are manufactured with a sophisticated bicomponent non-woven offering high tensile strength and is covered with an ultra-low linting microporous laminate to provide an excellent barrier to hazardous splash, infective agents and particles. Wear 3M Protective Coverall 4545 for an effective barrier against liquid splash, certain chemicals and hazardous particles. This fresh white 3M protective coverall 4545 meets a variety of standards for chemical protective clothing including EN 14126 Infective agents, EN 1073-2 Nuclear particulate resistance, EN 1149, EN ISO 13688, Type 6 Liquid Splash EN 13034 and Type 5 Dust EN ISO 13982-1. It's made with a sophisticated bicomponent non-woven which offers high tensile strength and is covered with a microporous laminate which allows heat and moisture to evaporate through the micro pores. The material has a notable feel and drape allowing for longer periods of wear, allowing you to get your job done in comfort. Knitted cuffs, elasticated waist and ankles make the wearer more comfortable and increase freedom of movement, while the ultra-low linting material reduces environmental contamination. Its 3 panel hood design is compatible with additional PPE (Personal Protective Equipment). The 2-way zips and fully sealable storm flaps reduce the risk of skin exposure and protect from contaminants. Strong stitched and partially bound seams reduce the risk of leakage and skin exposure and can offer improved strength. The coverall also has an anti-static coating to meet EN 1149, which reduces static discharge and minimises the risk of sparks and ignition.

EUR 11.73
1

3M Protective Coverall L

3M Protective Coverall L

These 3M protective coveralls are manufactured with a sophisticated bicomponent non-woven offering high tensile strength and is covered with an ultra-low linting microporous laminate to provide an excellent barrier to hazardous splash, infective agents and particles. Wear 3M Protective Coverall 4545 for an effective barrier against liquid splash, certain chemicals and hazardous particles. This fresh white 3M protective coverall 4545 meets a variety of standards for chemical protective clothing including EN 14126 Infective agents, EN 1073-2 Nuclear particulate resistance, EN 1149, EN ISO 13688, Type 6 Liquid Splash EN 13034 and Type 5 Dust EN ISO 13982-1. It's made with a sophisticated bicomponent non-woven which offers high tensile strength and is covered with a microporous laminate which allows heat and moisture to evaporate through the micro pores. The material has a notable feel and drape allowing for longer periods of wear, allowing you to get your job done in comfort. Knitted cuffs, elasticated waist and ankles make the wearer more comfortable and increase freedom of movement, while the ultra-low linting material reduces environmental contamination. Its 3 panel hood design is compatible with additional PPE (Personal Protective Equipment). The 2-way zips and fully sealable storm flaps reduce the risk of skin exposure and protect from contaminants. Strong stitched and partially bound seams reduce the risk of leakage and skin exposure and can offer improved strength. The coverall also has an anti-static coating to meet EN 1149, which reduces static discharge and minimises the risk of sparks and ignition.

EUR 11.00
1

3M Protective Coverall M

3M Protective Coverall M

These 3M protective coveralls are manufactured with a sophisticated bicomponent non-woven offering high tensile strength and is covered with an ultra-low linting microporous laminate to provide an excellent barrier to hazardous splash, infective agents and particles. Wear 3M Protective Coverall 4545 for an effective barrier against liquid splash, certain chemicals and hazardous particles. This fresh white 3M protective coverall 4545 meets a variety of standards for chemical protective clothing including EN 14126 Infective agents, EN 1073-2 Nuclear particulate resistance, EN 1149, EN ISO 13688, Type 6 Liquid Splash EN 13034 and Type 5 Dust EN ISO 13982-1. It's made with a sophisticated bicomponent non-woven which offers high tensile strength and is covered with a microporous laminate which allows heat and moisture to evaporate through the micro pores. The material has a notable feel and drape allowing for longer periods of wear, allowing you to get your job done in comfort. Knitted cuffs, elasticated waist and ankles make the wearer more comfortable and increase freedom of movement, while the ultra-low linting material reduces environmental contamination. Its 3 panel hood design is compatible with additional PPE (Personal Protective Equipment). The 2-way zips and fully sealable storm flaps reduce the risk of skin exposure and protect from contaminants. Strong stitched and partially bound seams reduce the risk of leakage and skin exposure and can offer improved strength. The coverall also has an anti-static coating to meet EN 1149, which reduces static discharge and minimises the risk of sparks and ignition.

EUR 11.00
1

3M Versaflo Intrinsically Safe Battery for use with 3M Versaflo Powered Air Turbo TR-800

3M Versaflo Intrinsically Safe Battery for use with 3M Versaflo Powered Air Turbo TR-800

3M™ Versaflo™ Battery TR-830 is our lithium-ion battery pack designed for use with the 3M™ Versaflo™ TR-800 Series Powered Air Turbo. It’s intrinsically safe, attaching mechanically to the TR-802E Powered Air Turbo (with tool) to help prevent accidental battery removal and spark risk during use (per EN 60079-11). The TR-803 battery is ATEX Certified, charges quickly and features a charge level indicator for quick visual reference. Quick charging and intrinsically safe 3M™ Versaflo™ Battery TR-830 lithium-ion battery pack is created for 3M™ Versaflo™ TR-800 Powered Air Turbo. This battery is engineered for use in potentially explosive atmospheres and feature yellow bumpers to help absorb impacts. The battery reaches 90 % charge in approximately 3.5 hours and features a charge level indicator for easy visual reference. The TR-838 Battery Attachment Tool (included) fastens the battery mechanically to the Powered Air Turbo to help prevent removal and reduce spark risk during use per EN 60079-11. With a new TR-830 Intrinsically Safe Battery and filter, the TR-800 Powered Air Turbo has an expected run time of 6 to 10 hours depending on the system configuration used. Powered Air Turbo runtime will vary based on battery age, filter loading, filter or cartridge selection, and user selected air flow settings. The battery can provide approximately 750 full charge/discharge cycle equivalents while maintaining 80 % of its original capacity, which is twice the cycle life of standard non-IS 3M™ Versaflo™ Battery TR-630 and TR-632.

EUR 916.08
1

3M Cubitron II Hookit Clean Sanding Film Disc 775L, 152 mm, Clean Sand, 240+ (Pack of 50)

3M Cubitron II Hookit Clean Sanding Film Disc 775L, 152 mm, Clean Sand, 240+ (Pack of 50)

3M™ Cubitron™ II Hookit™ Clean Sanding Film Disc 775L cuts up to two times faster and lasts up to six times longer than conventional abrasives. Our film discs are ideal for a broad range of applications focused primarily on stock removal and are effective on a wide variety of substrates.Use 3M™ Cubitron™ II Hookit™ Clean Sanding Film Disc 775L for better tear resistance than paper discs. Our discs cut up to two times faster and last up to six times longer than conventional abrasives. The multi-hole pattern on our Clean Sanding products evacuates dust at a higher rate than 5 or 6 hole products. Sandpaper discs cut better and last longer when dust isn’t loading the cutting surface of the abrasives. This design doesn’t require alignment of holes with the disc pad making disc changes fast and simple. An open coat construction means the abrasive grains have space between them to help evacuate dust and other sanding debris. This helps avoid clogging the cutting edge of the grains. The load resistant coating allows the disc to continue cutting even when sanding softwoods, paints and other materials that would usually clog the disc, leading to reduced sanding ability. Our film discs feature 3M Precision Shaped Grain which forms into triangular points that slice through metal rather than gouging or ploughing like traditional abrasives. These points continuously self-sharpen as they fracture, generating an extremely fast cut. 3M offers a complete line of hook and loop style Hookit discs for work spaces where adhesive backed discs may become contaminated by dust or dirt. Hookit discs tend to leave finer finishes than adhesive backed discs, so are often used in applications where a 3M™ Stikit™ disc may be too aggressive. Our discs are ideal for a range of applications focused on stock removal and are effective on a wide variety of substrates – including metals, composites, gelcoat and whitewood. Hookit sanding discs conveniently attach to a hook-and-loop backup disc pad (sold separately). They can be easily removed and can be reused for the entire life of the abrasive. For maximum dust extraction use with 3M Elite Random Orbital Sanders and 3M Hookit Clean Sanding pads (both sold separately).

EUR 57.42
1

3M Cubitron II Hookit Clean Sanding Film Disc 775L, 127 mm , Clean Sand, 150+ (Pack of 50)

3M Cubitron II Hookit Clean Sanding Film Disc 775L, 127 mm , Clean Sand, 150+ (Pack of 50)

This 3M™ precision shaped abrasive grain disc is an aluminum oxide, open coat, Hookit™ disc with precise multiple hole design for improved dust extraction. Constructed on a film backing. Primary markets: metalworking, woodworking.Use 3M™ Cubitron™ II Hookit™ Clean Sanding Film Disc 775L for better tear resistance than paper discs. Our discs cut up to two times faster and last up to six times longer than conventional abrasives. The multi-hole pattern on our Clean Sanding products evacuates dust at a higher rate than 5 or 6 hole products. Sandpaper discs cut better and last longer when dust isn’t loading the cutting surface of the abrasives. This design doesn’t require alignment of holes with the disc pad making disc changes fast and simple. An open coat construction means the abrasive grains have space between them to help evacuate dust and other sanding debris. This helps avoid clogging the cutting edge of the grains. The load resistant coating allows the disc to continue cutting even when sanding softwoods, paints and other materials that would usually clog the disc, leading to reduced sanding ability. Our film discs feature 3M Precision Shaped Grain which forms into triangular points that slice through metal rather than gouging or ploughing like traditional abrasives. These points continuously self-sharpen as they fracture, generating an extremely fast cut. 3M offers a complete line of hook and loop style Hookit discs for work spaces where adhesive backed discs may become contaminated by dust or dirt. Hookit discs tend to leave finer finishes than adhesive backed discs, so are often used in applications where a 3M™ Stikit™ disc may be too aggressive. Our discs are ideal for a range of applications focused on stock removal and are effective on a wide variety of substrates – including metals, composites, gelcoat and whitewood. Hookit sanding discs conveniently attach to a hook-and-loop backup disc pad (sold separately). They can be easily removed and can be reused for the entire life of the abrasive. For maximum dust extraction use with 3M Elite Random Orbital Sanders and 3M Hookit Clean Sanding pads (both sold separately).

EUR 43.56
1

3M Cubitron II Hookit Clean Sanding Film Disc 775L, 152 mm, Clean Sand, 400+ (Pack of 50)

3M Cubitron II Hookit Clean Sanding Film Disc 775L, 152 mm, Clean Sand, 400+ (Pack of 50)

3M™ Cubitron™ II Hookit™ Clean Sanding Film Disc 775L cuts up to two times faster and lasts up to six times longer than conventional abrasives. Our film discs are ideal for a broad range of applications focused primarily on stock removal and are effective on a wide variety of substrates.Use 3M™ Cubitron™ II Hookit™ Clean Sanding Film Disc 775L for better tear resistance than paper discs. Our discs cut up to two times faster and last up to six times longer than conventional abrasives. The multi-hole pattern on our Clean Sanding products evacuates dust at a higher rate than 5 or 6 hole products. Sandpaper discs cut better and last longer when dust isn’t loading the cutting surface of the abrasives. This design doesn’t require alignment of holes with the disc pad making disc changes fast and simple. An open coat construction means the abrasive grains have space between them to help evacuate dust and other sanding debris. This helps avoid clogging the cutting edge of the grains. The load resistant coating allows the disc to continue cutting even when sanding softwoods, paints and other materials that would usually clog the disc, leading to reduced sanding ability. Our film discs feature 3M Precision Shaped Grain which forms into triangular points that slice through metal rather than gouging or ploughing like traditional abrasives. These points continuously self-sharpen as they fracture, generating an extremely fast cut. 3M offers a complete line of hook and loop style Hookit discs for work spaces where adhesive backed discs may become contaminated by dust or dirt. Hookit discs tend to leave finer finishes than adhesive backed discs, so are often used in applications where a 3M™ Stikit™ disc may be too aggressive. Our discs are ideal for a range of applications focused on stock removal and are effective on a wide variety of substrates – including metals, composites, gelcoat and whitewood. Hookit sanding discs conveniently attach to a hook-and-loop backup disc pad (sold separately). They can be easily removed and can be reused for the entire life of the abrasive. For maximum dust extraction use with 3M Elite Random Orbital Sanders and 3M Hookit Clean Sanding pads (both sold separately).

EUR 57.42
1

3M Cubitron II Hookit Clean Sanding Film Disc 775L, 127 mm, Clean Sand, 240+ (Pack of 50)

3M Cubitron II Hookit Clean Sanding Film Disc 775L, 127 mm, Clean Sand, 240+ (Pack of 50)

This 3M™ precision shaped abrasive grain disc is an aluminum oxide, open coat, Hookit™ disc with precise multiple hole design for improved dust extraction. Constructed on a film backing. Primary markets: metalworking, woodworking.Use 3M™ Cubitron™ II Hookit™ Clean Sanding Film Disc 775L for better tear resistance than paper discs. Our discs cut up to two times faster and last up to six times longer than conventional abrasives. The multi-hole pattern on our Clean Sanding products evacuates dust at a higher rate than 5 or 6 hole products. Sandpaper discs cut better and last longer when dust isn’t loading the cutting surface of the abrasives. This design doesn’t require alignment of holes with the disc pad making disc changes fast and simple. An open coat construction means the abrasive grains have space between them to help evacuate dust and other sanding debris. This helps avoid clogging the cutting edge of the grains. The load resistant coating allows the disc to continue cutting even when sanding softwoods, paints and other materials that would usually clog the disc, leading to reduced sanding ability. Our film discs feature 3M Precision Shaped Grain which forms into triangular points that slice through metal rather than gouging or ploughing like traditional abrasives. These points continuously self-sharpen as they fracture, generating an extremely fast cut. 3M offers a complete line of hook and loop style Hookit discs for work spaces where adhesive backed discs may become contaminated by dust or dirt. Hookit discs tend to leave finer finishes than adhesive backed discs, so are often used in applications where a 3M™ Stikit™ disc may be too aggressive. Our discs are ideal for a range of applications focused on stock removal and are effective on a wide variety of substrates – including metals, composites, gelcoat and whitewood. Hookit sanding discs conveniently attach to a hook-and-loop backup disc pad (sold separately). They can be easily removed and can be reused for the entire life of the abrasive. For maximum dust extraction use with 3M Elite Random Orbital Sanders and 3M Hookit Clean Sanding pads (both sold separately).

EUR 43.56
1

3M Xtract Cubitron II Hookit Clean Sanding Film Disc 775L, 127 mm, Clean Sand, 400+ (Pack of 50)

3M Xtract Cubitron II Hookit Clean Sanding Film Disc 775L, 127 mm, Clean Sand, 400+ (Pack of 50)

This 3M™ precision shaped abrasive grain disc is an aluminum oxide, open coat, Hookit™ disc with precise multiple hole design for improved dust extraction. Constructed on a film backing. Primary markets: metalworking, woodworking.Use 3M™ Cubitron™ II Hookit™ Clean Sanding Film Disc 775L for better tear resistance than paper discs. Our discs cut up to two times faster and last up to six times longer than conventional abrasives. The multi-hole pattern on our Clean Sanding products evacuates dust at a higher rate than 5 or 6 hole products. Sandpaper discs cut better and last longer when dust isn’t loading the cutting surface of the abrasives. This design doesn’t require alignment of holes with the disc pad making disc changes fast and simple. An open coat construction means the abrasive grains have space between them to help evacuate dust and other sanding debris. This helps avoid clogging the cutting edge of the grains. The load resistant coating allows the disc to continue cutting even when sanding softwoods, paints and other materials that would usually clog the disc, leading to reduced sanding ability. Our film discs feature 3M Precision Shaped Grain which forms into triangular points that slice through metal rather than gouging or ploughing like traditional abrasives. These points continuously self-sharpen as they fracture, generating an extremely fast cut. 3M offers a complete line of hook and loop style Hookit discs for work spaces where adhesive backed discs may become contaminated by dust or dirt. Hookit discs tend to leave finer finishes than adhesive backed discs, so are often used in applications where a 3M™ Stikit™ disc may be too aggressive. Our discs are ideal for a range of applications focused on stock removal and are effective on a wide variety of substrates – including metals, composites, gelcoat and whitewood. Hookit sanding discs conveniently attach to a hook-and-loop backup disc pad (sold separately). They can be easily removed and can be reused for the entire life of the abrasive. For maximum dust extraction use with 3M Elite Random Orbital Sanders and 3M Hookit Clean Sanding pads (both sold separately).

EUR 43.56
1

3M Cubitron II Hookit Clean Sanding Film Disc 775L, 127 mm, Clean Sand, 80+ (Pack of 50)

3M Cubitron II Hookit Clean Sanding Film Disc 775L, 127 mm, Clean Sand, 80+ (Pack of 50)

3M™ Cubitron™ II Hookit™ Clean Sanding Film Disc 775L cuts up to two times faster and lasts up to six times longer than conventional abrasives. Our film discs are ideal for a broad range of applications focused primarily on stock removal and are effective on a wide variety of substrates.Use 3M™ Cubitron™ II Hookit™ Clean Sanding Film Disc 775L for better tear resistance than paper discs. Our discs cut up to two times faster and last up to six times longer than conventional abrasives. The multi-hole pattern on our Clean Sanding products evacuates dust at a higher rate than 5 or 6 hole products. Sandpaper discs cut better and last longer when dust isn’t loading the cutting surface of the abrasives. This design doesn’t require alignment of holes with the disc pad making disc changes fast and simple. An open coat construction means the abrasive grains have space between them to help evacuate dust and other sanding debris. This helps avoid clogging the cutting edge of the grains. The load resistant coating allows the disc to continue cutting even when sanding softwoods, paints and other materials that would usually clog the disc, leading to reduced sanding ability. Our film discs feature 3M Precision Shaped Grain which forms into triangular points that slice through metal rather than gouging or ploughing like traditional abrasives. These points continuously self-sharpen as they fracture, generating an extremely fast cut. 3M offers a complete line of hook and loop style Hookit discs for work spaces where adhesive backed discs may become contaminated by dust or dirt. Hookit discs tend to leave finer finishes than adhesive backed discs, so are often used in applications where a 3M™ Stikit™ disc may be too aggressive. Our discs are ideal for a range of applications focused on stock removal and are effective on a wide variety of substrates – including metals, composites, gelcoat and whitewood. Hookit sanding discs conveniently attach to a hook-and-loop backup disc pad (sold separately). They can be easily removed and can be reused for the entire life of the abrasive. For maximum dust extraction use with 3M Elite Random Orbital Sanders and 3M Hookit Clean Sanding pads (both sold separately).

EUR 48.44
1

3M Cubitron II Hookit Clean Sanding Film Disc 775L, 127 mm , Clean Sand, 220+ (Pack of 50)

3M Cubitron II Hookit Clean Sanding Film Disc 775L, 127 mm , Clean Sand, 220+ (Pack of 50)

This 3M™ precision shaped abrasive grain disc is an aluminum oxide, open coat, Hookit™ disc with precise multiple hole design for improved dust extraction. Constructed on a film backing. Primary markets: metalworking, woodworking.Use 3M™ Cubitron™ II Hookit™ Clean Sanding Film Disc 775L for better tear resistance than paper discs. Our discs cut up to two times faster and last up to six times longer than conventional abrasives. The multi-hole pattern on our Clean Sanding products evacuates dust at a higher rate than 5 or 6 hole products. Sandpaper discs cut better and last longer when dust isn’t loading the cutting surface of the abrasives. This design doesn’t require alignment of holes with the disc pad making disc changes fast and simple. An open coat construction means the abrasive grains have space between them to help evacuate dust and other sanding debris. This helps avoid clogging the cutting edge of the grains. The load resistant coating allows the disc to continue cutting even when sanding softwoods, paints and other materials that would usually clog the disc, leading to reduced sanding ability. Our film discs feature 3M Precision Shaped Grain which forms into triangular points that slice through metal rather than gouging or ploughing like traditional abrasives. These points continuously self-sharpen as they fracture, generating an extremely fast cut. 3M offers a complete line of hook and loop style Hookit discs for work spaces where adhesive backed discs may become contaminated by dust or dirt. Hookit discs tend to leave finer finishes than adhesive backed discs, so are often used in applications where a 3M™ Stikit™ disc may be too aggressive. Our discs are ideal for a range of applications focused on stock removal and are effective on a wide variety of substrates – including metals, composites, gelcoat and whitewood. Hookit sanding discs conveniently attach to a hook-and-loop backup disc pad (sold separately). They can be easily removed and can be reused for the entire life of the abrasive. For maximum dust extraction use with 3M Elite Random Orbital Sanders and 3M Hookit Clean Sanding pads (both sold separately).

EUR 43.56
1

3M Cubitron II Hookit Clean Sanding Film Disc 775L, 127 mm, Clean Sand, 120+ (Pack of 50)

3M Cubitron II Hookit Clean Sanding Film Disc 775L, 127 mm, Clean Sand, 120+ (Pack of 50)

This 3M™ precision shaped abrasive grain disc is an aluminum oxide, open coat, Hookit™ disc with precise multiple hole design for improved dust extraction. Constructed on a film backing. Primary markets: metalworking, woodworking.Use 3M™ Cubitron™ II Hookit™ Clean Sanding Film Disc 775L for better tear resistance than paper discs. Our discs cut up to two times faster and last up to six times longer than conventional abrasives. The multi-hole pattern on our Clean Sanding products evacuates dust at a higher rate than 5 or 6 hole products. Sandpaper discs cut better and last longer when dust isn’t loading the cutting surface of the abrasives. This design doesn’t require alignment of holes with the disc pad making disc changes fast and simple. An open coat construction means the abrasive grains have space between them to help evacuate dust and other sanding debris. This helps avoid clogging the cutting edge of the grains. The load resistant coating allows the disc to continue cutting even when sanding softwoods, paints and other materials that would usually clog the disc, leading to reduced sanding ability. Our film discs feature 3M Precision Shaped Grain which forms into triangular points that slice through metal rather than gouging or ploughing like traditional abrasives. These points continuously self-sharpen as they fracture, generating an extremely fast cut. 3M offers a complete line of hook and loop style Hookit discs for work spaces where adhesive backed discs may become contaminated by dust or dirt. Hookit discs tend to leave finer finishes than adhesive backed discs, so are often used in applications where a 3M™ Stikit™ disc may be too aggressive. Our discs are ideal for a range of applications focused on stock removal and are effective on a wide variety of substrates – including metals, composites, gelcoat and whitewood. Hookit sanding discs conveniently attach to a hook-and-loop backup disc pad (sold separately). They can be easily removed and can be reused for the entire life of the abrasive. For maximum dust extraction use with 3M Elite Random Orbital Sanders and 3M Hookit Clean Sanding pads (both sold separately).

EUR 43.56
1

3M Cubitron II Hookit Clean Sanding Film Disc 775L, 152 mm, Clean Sand, 150+ (Pack of 50)

3M Cubitron II Hookit Clean Sanding Film Disc 775L, 152 mm, Clean Sand, 150+ (Pack of 50)

3M™ Cubitron™ II Hookit™ Clean Sanding Film Disc 775L cuts up to two times faster and lasts up to six times longer than conventional abrasives. Our film discs are ideal for a broad range of applications focused primarily on stock removal and are effective on a wide variety of substrates.Use 3M™ Cubitron™ II Hookit™ Clean Sanding Film Disc 775L for better tear resistance than paper discs. Our discs cut up to two times faster and last up to six times longer than conventional abrasives. The multi-hole pattern on our Clean Sanding products evacuates dust at a higher rate than 5 or 6 hole products. Sandpaper discs cut better and last longer when dust isn’t loading the cutting surface of the abrasives. This design doesn’t require alignment of holes with the disc pad making disc changes fast and simple. An open coat construction means the abrasive grains have space between them to help evacuate dust and other sanding debris. This helps avoid clogging the cutting edge of the grains. The load resistant coating allows the disc to continue cutting even when sanding softwoods, paints and other materials that would usually clog the disc, leading to reduced sanding ability. Our film discs feature 3M Precision Shaped Grain which forms into triangular points that slice through metal rather than gouging or ploughing like traditional abrasives. These points continuously self-sharpen as they fracture, generating an extremely fast cut. 3M offers a complete line of hook and loop style Hookit discs for work spaces where adhesive backed discs may become contaminated by dust or dirt. Hookit discs tend to leave finer finishes than adhesive backed discs, so are often used in applications where a 3M™ Stikit™ disc may be too aggressive. Our discs are ideal for a range of applications focused on stock removal and are effective on a wide variety of substrates – including metals, composites, gelcoat and whitewood. Hookit sanding discs conveniently attach to a hook-and-loop backup disc pad (sold separately). They can be easily removed and can be reused for the entire life of the abrasive. For maximum dust extraction use with 3M Elite Random Orbital Sanders and 3M Hookit Clean Sanding pads (both sold separately).

EUR 57.42
1

3M Xtract Cubitron II Hookit Clean Sanding Film Disc 775L, 127 mm, Clean Sand, 320+ (Pack of 50)

3M Xtract Cubitron II Hookit Clean Sanding Film Disc 775L, 127 mm, Clean Sand, 320+ (Pack of 50)

This 3M™ precision shaped abrasive grain disc is an aluminum oxide, open coat, Hookit™ disc with precise multiple hole design for improved dust extraction. Constructed on a film backing. Primary markets: metalworking, woodworking.Use 3M™ Cubitron™ II Hookit™ Clean Sanding Film Disc 775L for better tear resistance than paper discs. Our discs cut up to two times faster and last up to six times longer than conventional abrasives. The multi-hole pattern on our Clean Sanding products evacuates dust at a higher rate than 5 or 6 hole products. Sandpaper discs cut better and last longer when dust isn’t loading the cutting surface of the abrasives. This design doesn’t require alignment of holes with the disc pad making disc changes fast and simple. An open coat construction means the abrasive grains have space between them to help evacuate dust and other sanding debris. This helps avoid clogging the cutting edge of the grains. The load resistant coating allows the disc to continue cutting even when sanding softwoods, paints and other materials that would usually clog the disc, leading to reduced sanding ability. Our film discs feature 3M Precision Shaped Grain which forms into triangular points that slice through metal rather than gouging or ploughing like traditional abrasives. These points continuously self-sharpen as they fracture, generating an extremely fast cut. 3M offers a complete line of hook and loop style Hookit discs for work spaces where adhesive backed discs may become contaminated by dust or dirt. Hookit discs tend to leave finer finishes than adhesive backed discs, so are often used in applications where a 3M™ Stikit™ disc may be too aggressive. Our discs are ideal for a range of applications focused on stock removal and are effective on a wide variety of substrates – including metals, composites, gelcoat and whitewood. Hookit sanding discs conveniently attach to a hook-and-loop backup disc pad (sold separately). They can be easily removed and can be reused for the entire life of the abrasive. For maximum dust extraction use with 3M Elite Random Orbital Sanders and 3M Hookit Clean Sanding pads (both sold separately).

EUR 37.55
1

3M Cubitron II Hookit Clean Sanding Film Disc 775L, 152 mm, Clean Sand, 180+ (Pack of 50)

3M Cubitron II Hookit Clean Sanding Film Disc 775L, 152 mm, Clean Sand, 180+ (Pack of 50)

3M™ Cubitron™ II Hookit™ Clean Sanding Film Disc 775L cuts up to two times faster and lasts up to six times longer than conventional abrasives. Our film discs are ideal for a broad range of applications focused primarily on stock removal and are effective on a wide variety of substrates.Use 3M™ Cubitron™ II Hookit™ Clean Sanding Film Disc 775L for better tear resistance than paper discs. Our discs cut up to two times faster and last up to six times longer than conventional abrasives. The multi-hole pattern on our Clean Sanding products evacuates dust at a higher rate than 5 or 6 hole products. Sandpaper discs cut better and last longer when dust isn’t loading the cutting surface of the abrasives. This design doesn’t require alignment of holes with the disc pad making disc changes fast and simple. An open coat construction means the abrasive grains have space between them to help evacuate dust and other sanding debris. This helps avoid clogging the cutting edge of the grains. The load resistant coating allows the disc to continue cutting even when sanding softwoods, paints and other materials that would usually clog the disc, leading to reduced sanding ability. Our film discs feature 3M Precision Shaped Grain which forms into triangular points that slice through metal rather than gouging or ploughing like traditional abrasives. These points continuously self-sharpen as they fracture, generating an extremely fast cut. 3M offers a complete line of hook and loop style Hookit discs for work spaces where adhesive backed discs may become contaminated by dust or dirt. Hookit discs tend to leave finer finishes than adhesive backed discs, so are often used in applications where a 3M™ Stikit™ disc may be too aggressive. Our discs are ideal for a range of applications focused on stock removal and are effective on a wide variety of substrates – including metals, composites, gelcoat and whitewood. Hookit sanding discs conveniently attach to a hook-and-loop backup disc pad (sold separately). They can be easily removed and can be reused for the entire life of the abrasive. For maximum dust extraction use with 3M Elite Random Orbital Sanders and 3M Hookit Clean Sanding pads (both sold separately).

EUR 57.42
1

3M Cubitron II Hookit Clean Sanding Film Disc 775L, 127 mm, Clean Sand, 80+ (Pack of 50)

3M Cubitron II Hookit Clean Sanding Film Disc 775L, 127 mm, Clean Sand, 80+ (Pack of 50)

This 3M™ precision shaped abrasive grain disc is an aluminum oxide, open coat, Hookit™ disc with precise multiple hole design for improved dust extraction. Constructed on a film backing. Primary markets: metalworking, woodworking.Use 3M™ Cubitron™ II Hookit™ Clean Sanding Film Disc 775L for better tear resistance than paper discs. Our discs cut up to two times faster and last up to six times longer than conventional abrasives. The multi-hole pattern on our Clean Sanding products evacuates dust at a higher rate than 5 or 6 hole products. Sandpaper discs cut better and last longer when dust isn’t loading the cutting surface of the abrasives. This design doesn’t require alignment of holes with the disc pad making disc changes fast and simple. An open coat construction means the abrasive grains have space between them to help evacuate dust and other sanding debris. This helps avoid clogging the cutting edge of the grains. The load resistant coating allows the disc to continue cutting even when sanding softwoods, paints and other materials that would usually clog the disc, leading to reduced sanding ability. Our film discs feature 3M Precision Shaped Grain which forms into triangular points that slice through metal rather than gouging or ploughing like traditional abrasives. These points continuously self-sharpen as they fracture, generating an extremely fast cut. 3M offers a complete line of hook and loop style Hookit discs for work spaces where adhesive backed discs may become contaminated by dust or dirt. Hookit discs tend to leave finer finishes than adhesive backed discs, so are often used in applications where a 3M™ Stikit™ disc may be too aggressive. Our discs are ideal for a range of applications focused on stock removal and are effective on a wide variety of substrates – including metals, composites, gelcoat and whitewood. Hookit sanding discs conveniently attach to a hook-and-loop backup disc pad (sold separately). They can be easily removed and can be reused for the entire life of the abrasive. For maximum dust extraction use with 3M Elite Random Orbital Sanders and 3M Hookit Clean Sanding pads (both sold separately).

EUR 43.56
1