Titleist GT1 Golf Driver Mens Left R Fujikura Air Speeder Next Gen 40g 9.0
Titleist GT1 Driver The Titleist GT1 Driver is built for explosive speed and effortless launch, featuring an ultra-lightweight design with a refined shaft and grip to help moderate swing speed players generate faster clubhead speeds. For a more traditional feel, a standard version includes a 15-gram (+6) headweight with standard shaft and grip options. Its aerodynamic shaping, with a refined crown, sole contours, and a shallower face, further enhances speed. Titleist's engineering innovations shine in the GT1 Driver , featuring the Seamless Thermoform Crown, made from Proprietary Matrix Polymer (PMP) for weight savings while maintaining signature sound and feel. The Split Mass Construction redistributes this weight, deepening the centre of gravity (CG) for higher launch, optimised speed, and improved stability. The Speed Ring VFT Face reinforces the perimeter for maximum ball speed on centre strikes, while Variable Face Thickness (VFT) preserves speed on mishits. An interchangeable back weight allows fine-tuning of headweight and swingweight for a personalised fit. SEAMLESS THERMOFORM CROWN Constructed from a groundbreaking Proprietary Matrix Polymer, the GT1's ultra-lightweight crown introduces new material advancements while preserving Titleist's renowned sound and feel. This seamlessly wrapped design offers a clean, confidence-inspiring look at address. SPLIT MASS CONSTRUCTION A game-changing internal weighting system strategically positions mass within the clubhead--placing weight rearward for higher launch and forward for optimised speed, spin, and forgiveness. The result is a driver that delivers exceptional launch conditions and increased overall distance. LOWEST, DEEPEST CG (CENTRE OF GRAVITY) GT1 boasts the deepest CG of any GT driver, maximising launch and increasing stability. This low, deep CG promotes effortless distance and helps golfers achieve longer, more consistent drives. SPEED RING VFT FACE Combining two cutting-edge technologies, the GT1's face is engineered for speed and consistency. The reinforced titanium Speed Ring stabilises the perimeter to deliver the highest allowable ball speed at the centre, while Variable Face Thickness (VFT) ensures fast and reliable performance across the entire hitting surface. STABILITY & WEIGHTING CONTROL GT1's interchangeable back weight system enables fine-tuning of headweight and swingweight, allowing golfers to personalise their setup for the perfect balance of launch, ball speed, and stability. Work with a fitter to find the ideal combination of shaft and weighting for peak performance. GT1 Driver Specifications Feature Specification Loft 9.0, 10.0, 12.0 (RH/LH) Head 460cc Standard Length 45.5” Standard Lie 59.0° Weight Options 9 Gram (Nominal) w/ +6, +4, +2, -2, -4, -6 SureFit Hosel Compatible with GT, TSR, TSi, TS GT1 Driver Standard Shafts Shaft Launch Flex Weight Torque Fujikura Air Speeder Next Gen 40 High R2, R, S 40g
Titleist GT1 Golf Driver Mens Left R2 Fujikura Air Speeder Next Gen 40g 12
Titleist GT1 Driver The Titleist GT1 Driver is built for explosive speed and effortless launch, featuring an ultra-lightweight design with a refined shaft and grip to help moderate swing speed players generate faster clubhead speeds. For a more traditional feel, a standard version includes a 15-gram (+6) headweight with standard shaft and grip options. Its aerodynamic shaping, with a refined crown, sole contours, and a shallower face, further enhances speed. Titleist's engineering innovations shine in the GT1 Driver , featuring the Seamless Thermoform Crown, made from Proprietary Matrix Polymer (PMP) for weight savings while maintaining signature sound and feel. The Split Mass Construction redistributes this weight, deepening the centre of gravity (CG) for higher launch, optimised speed, and improved stability. The Speed Ring VFT Face reinforces the perimeter for maximum ball speed on centre strikes, while Variable Face Thickness (VFT) preserves speed on mishits. An interchangeable back weight allows fine-tuning of headweight and swingweight for a personalised fit. SEAMLESS THERMOFORM CROWN Constructed from a groundbreaking Proprietary Matrix Polymer, the GT1's ultra-lightweight crown introduces new material advancements while preserving Titleist's renowned sound and feel. This seamlessly wrapped design offers a clean, confidence-inspiring look at address. SPLIT MASS CONSTRUCTION A game-changing internal weighting system strategically positions mass within the clubhead--placing weight rearward for higher launch and forward for optimised speed, spin, and forgiveness. The result is a driver that delivers exceptional launch conditions and increased overall distance. LOWEST, DEEPEST CG (CENTRE OF GRAVITY) GT1 boasts the deepest CG of any GT driver, maximising launch and increasing stability. This low, deep CG promotes effortless distance and helps golfers achieve longer, more consistent drives. SPEED RING VFT FACE Combining two cutting-edge technologies, the GT1's face is engineered for speed and consistency. The reinforced titanium Speed Ring stabilises the perimeter to deliver the highest allowable ball speed at the centre, while Variable Face Thickness (VFT) ensures fast and reliable performance across the entire hitting surface. STABILITY & WEIGHTING CONTROL GT1's interchangeable back weight system enables fine-tuning of headweight and swingweight, allowing golfers to personalise their setup for the perfect balance of launch, ball speed, and stability. Work with a fitter to find the ideal combination of shaft and weighting for peak performance. GT1 Driver Specifications Feature Specification Loft 9.0, 10.0, 12.0 (RH/LH) Head 460cc Standard Length 45.5” Standard Lie 59.0° Weight Options 9 Gram (Nominal) w/ +6, +4, +2, -2, -4, -6 SureFit Hosel Compatible with GT, TSR, TSi, TS GT1 Driver Standard Shafts Shaft Launch Flex Weight Torque Fujikura Air Speeder Next Gen 40 High R2, R, S 40g
Titleist GT1 Golf Driver Mens Right R Fujikura Air Speeder Next Gen 40g 10
Titleist GT1 Driver The Titleist GT1 Driver is built for explosive speed and effortless launch, featuring an ultra-lightweight design with a refined shaft and grip to help moderate swing speed players generate faster clubhead speeds. For a more traditional feel, a standard version includes a 15-gram (+6) headweight with standard shaft and grip options. Its aerodynamic shaping, with a refined crown, sole contours, and a shallower face, further enhances speed. Titleist's engineering innovations shine in the GT1 Driver , featuring the Seamless Thermoform Crown, made from Proprietary Matrix Polymer (PMP) for weight savings while maintaining signature sound and feel. The Split Mass Construction redistributes this weight, deepening the centre of gravity (CG) for higher launch, optimised speed, and improved stability. The Speed Ring VFT Face reinforces the perimeter for maximum ball speed on centre strikes, while Variable Face Thickness (VFT) preserves speed on mishits. An interchangeable back weight allows fine-tuning of headweight and swingweight for a personalised fit. SEAMLESS THERMOFORM CROWN Constructed from a groundbreaking Proprietary Matrix Polymer, the GT1's ultra-lightweight crown introduces new material advancements while preserving Titleist's renowned sound and feel. This seamlessly wrapped design offers a clean, confidence-inspiring look at address. SPLIT MASS CONSTRUCTION A game-changing internal weighting system strategically positions mass within the clubhead--placing weight rearward for higher launch and forward for optimised speed, spin, and forgiveness. The result is a driver that delivers exceptional launch conditions and increased overall distance. LOWEST, DEEPEST CG (CENTRE OF GRAVITY) GT1 boasts the deepest CG of any GT driver, maximising launch and increasing stability. This low, deep CG promotes effortless distance and helps golfers achieve longer, more consistent drives. SPEED RING VFT FACE Combining two cutting-edge technologies, the GT1's face is engineered for speed and consistency. The reinforced titanium Speed Ring stabilises the perimeter to deliver the highest allowable ball speed at the centre, while Variable Face Thickness (VFT) ensures fast and reliable performance across the entire hitting surface. STABILITY & WEIGHTING CONTROL GT1's interchangeable back weight system enables fine-tuning of headweight and swingweight, allowing golfers to personalise their setup for the perfect balance of launch, ball speed, and stability. Work with a fitter to find the ideal combination of shaft and weighting for peak performance. GT1 Driver Specifications Feature Specification Loft 9.0, 10.0, 12.0 (RH/LH) Head 460cc Standard Length 45.5” Standard Lie 59.0° Weight Options 9 Gram (Nominal) w/ +6, +4, +2, -2, -4, -6 SureFit Hosel Compatible with GT, TSR, TSi, TS GT1 Driver Standard Shafts Shaft Launch Flex Weight Torque Fujikura Air Speeder Next Gen 40 High R2, R, S 40g
Titleist GT1 Golf Driver Mens Left R2 Fujikura Air Speeder Next Gen 40g 10
Titleist GT1 Driver The Titleist GT1 Driver is built for explosive speed and effortless launch, featuring an ultra-lightweight design with a refined shaft and grip to help moderate swing speed players generate faster clubhead speeds. For a more traditional feel, a standard version includes a 15-gram (+6) headweight with standard shaft and grip options. Its aerodynamic shaping, with a refined crown, sole contours, and a shallower face, further enhances speed. Titleist's engineering innovations shine in the GT1 Driver , featuring the Seamless Thermoform Crown, made from Proprietary Matrix Polymer (PMP) for weight savings while maintaining signature sound and feel. The Split Mass Construction redistributes this weight, deepening the centre of gravity (CG) for higher launch, optimised speed, and improved stability. The Speed Ring VFT Face reinforces the perimeter for maximum ball speed on centre strikes, while Variable Face Thickness (VFT) preserves speed on mishits. An interchangeable back weight allows fine-tuning of headweight and swingweight for a personalised fit. SEAMLESS THERMOFORM CROWN Constructed from a groundbreaking Proprietary Matrix Polymer, the GT1's ultra-lightweight crown introduces new material advancements while preserving Titleist's renowned sound and feel. This seamlessly wrapped design offers a clean, confidence-inspiring look at address. SPLIT MASS CONSTRUCTION A game-changing internal weighting system strategically positions mass within the clubhead--placing weight rearward for higher launch and forward for optimised speed, spin, and forgiveness. The result is a driver that delivers exceptional launch conditions and increased overall distance. LOWEST, DEEPEST CG (CENTRE OF GRAVITY) GT1 boasts the deepest CG of any GT driver, maximising launch and increasing stability. This low, deep CG promotes effortless distance and helps golfers achieve longer, more consistent drives. SPEED RING VFT FACE Combining two cutting-edge technologies, the GT1's face is engineered for speed and consistency. The reinforced titanium Speed Ring stabilises the perimeter to deliver the highest allowable ball speed at the centre, while Variable Face Thickness (VFT) ensures fast and reliable performance across the entire hitting surface. STABILITY & WEIGHTING CONTROL GT1's interchangeable back weight system enables fine-tuning of headweight and swingweight, allowing golfers to personalise their setup for the perfect balance of launch, ball speed, and stability. Work with a fitter to find the ideal combination of shaft and weighting for peak performance. GT1 Driver Specifications Feature Specification Loft 9.0, 10.0, 12.0 (RH/LH) Head 460cc Standard Length 45.5” Standard Lie 59.0° Weight Options 9 Gram (Nominal) w/ +6, +4, +2, -2, -4, -6 SureFit Hosel Compatible with GT, TSR, TSi, TS GT1 Driver Standard Shafts Shaft Launch Flex Weight Torque Fujikura Air Speeder Next Gen 40 High R2, R, S 40g
Titleist GT1 Golf Driver Mens Left R2 Fujikura Air Speeder Next Gen 40g 9.0
Titleist GT1 Driver The Titleist GT1 Driver is built for explosive speed and effortless launch, featuring an ultra-lightweight design with a refined shaft and grip to help moderate swing speed players generate faster clubhead speeds. For a more traditional feel, a standard version includes a 15-gram (+6) headweight with standard shaft and grip options. Its aerodynamic shaping, with a refined crown, sole contours, and a shallower face, further enhances speed. Titleist's engineering innovations shine in the GT1 Driver , featuring the Seamless Thermoform Crown, made from Proprietary Matrix Polymer (PMP) for weight savings while maintaining signature sound and feel. The Split Mass Construction redistributes this weight, deepening the centre of gravity (CG) for higher launch, optimised speed, and improved stability. The Speed Ring VFT Face reinforces the perimeter for maximum ball speed on centre strikes, while Variable Face Thickness (VFT) preserves speed on mishits. An interchangeable back weight allows fine-tuning of headweight and swingweight for a personalised fit. SEAMLESS THERMOFORM CROWN Constructed from a groundbreaking Proprietary Matrix Polymer, the GT1's ultra-lightweight crown introduces new material advancements while preserving Titleist's renowned sound and feel. This seamlessly wrapped design offers a clean, confidence-inspiring look at address. SPLIT MASS CONSTRUCTION A game-changing internal weighting system strategically positions mass within the clubhead--placing weight rearward for higher launch and forward for optimised speed, spin, and forgiveness. The result is a driver that delivers exceptional launch conditions and increased overall distance. LOWEST, DEEPEST CG (CENTRE OF GRAVITY) GT1 boasts the deepest CG of any GT driver, maximising launch and increasing stability. This low, deep CG promotes effortless distance and helps golfers achieve longer, more consistent drives. SPEED RING VFT FACE Combining two cutting-edge technologies, the GT1's face is engineered for speed and consistency. The reinforced titanium Speed Ring stabilises the perimeter to deliver the highest allowable ball speed at the centre, while Variable Face Thickness (VFT) ensures fast and reliable performance across the entire hitting surface. STABILITY & WEIGHTING CONTROL GT1's interchangeable back weight system enables fine-tuning of headweight and swingweight, allowing golfers to personalise their setup for the perfect balance of launch, ball speed, and stability. Work with a fitter to find the ideal combination of shaft and weighting for peak performance. GT1 Driver Specifications Feature Specification Loft 9.0, 10.0, 12.0 (RH/LH) Head 460cc Standard Length 45.5” Standard Lie 59.0° Weight Options 9 Gram (Nominal) w/ +6, +4, +2, -2, -4, -6 SureFit Hosel Compatible with GT, TSR, TSi, TS GT1 Driver Standard Shafts Shaft Launch Flex Weight Torque Fujikura Air Speeder Next Gen 40 High R2, R, S 40g
Titleist GT1 Golf Driver Mens Left R Fujikura Air Speeder Next Gen 40g 12
Titleist GT1 Driver The Titleist GT1 Driver is built for explosive speed and effortless launch, featuring an ultra-lightweight design with a refined shaft and grip to help moderate swing speed players generate faster clubhead speeds. For a more traditional feel, a standard version includes a 15-gram (+6) headweight with standard shaft and grip options. Its aerodynamic shaping, with a refined crown, sole contours, and a shallower face, further enhances speed. Titleist's engineering innovations shine in the GT1 Driver , featuring the Seamless Thermoform Crown, made from Proprietary Matrix Polymer (PMP) for weight savings while maintaining signature sound and feel. The Split Mass Construction redistributes this weight, deepening the centre of gravity (CG) for higher launch, optimised speed, and improved stability. The Speed Ring VFT Face reinforces the perimeter for maximum ball speed on centre strikes, while Variable Face Thickness (VFT) preserves speed on mishits. An interchangeable back weight allows fine-tuning of headweight and swingweight for a personalised fit. SEAMLESS THERMOFORM CROWN Constructed from a groundbreaking Proprietary Matrix Polymer, the GT1's ultra-lightweight crown introduces new material advancements while preserving Titleist's renowned sound and feel. This seamlessly wrapped design offers a clean, confidence-inspiring look at address. SPLIT MASS CONSTRUCTION A game-changing internal weighting system strategically positions mass within the clubhead--placing weight rearward for higher launch and forward for optimised speed, spin, and forgiveness. The result is a driver that delivers exceptional launch conditions and increased overall distance. LOWEST, DEEPEST CG (CENTRE OF GRAVITY) GT1 boasts the deepest CG of any GT driver, maximising launch and increasing stability. This low, deep CG promotes effortless distance and helps golfers achieve longer, more consistent drives. SPEED RING VFT FACE Combining two cutting-edge technologies, the GT1's face is engineered for speed and consistency. The reinforced titanium Speed Ring stabilises the perimeter to deliver the highest allowable ball speed at the centre, while Variable Face Thickness (VFT) ensures fast and reliable performance across the entire hitting surface. STABILITY & WEIGHTING CONTROL GT1's interchangeable back weight system enables fine-tuning of headweight and swingweight, allowing golfers to personalise their setup for the perfect balance of launch, ball speed, and stability. Work with a fitter to find the ideal combination of shaft and weighting for peak performance. GT1 Driver Specifications Feature Specification Loft 9.0, 10.0, 12.0 (RH/LH) Head 460cc Standard Length 45.5” Standard Lie 59.0° Weight Options 9 Gram (Nominal) w/ +6, +4, +2, -2, -4, -6 SureFit Hosel Compatible with GT, TSR, TSi, TS GT1 Driver Standard Shafts Shaft Launch Flex Weight Torque Fujikura Air Speeder Next Gen 40 High R2, R, S 40g
Titleist GT1 Golf Driver Mens Left R2 Fujikura Air Speeder Next Gen 40g 10
Titleist GT1 Driver The Titleist GT1 Driver is engineered for exceptional speed and effortless launch, featuring a lightweight construction that enhances clubhead acceleration. Designed for players with moderate swing speeds, it includes a refined shaft and grip to maximise performance. For those preferring a more conventional setup, a standard model offers a 15-gram (+6) headweight, along with standard shaft and grip options. Its streamlined aerodynamics, including a reshaped crown, optimised sole contours, and shallower face, contribute to faster clubhead speeds and greater efficiency through the swing. Innovative materials and advanced weighting define the GT1 Driver . The Seamless Thermoform Crown, crafted from Titleist's exclusive Proprietary Matrix Polymer (PMP), reduces weight while preserving the brand's signature sound and feel. This redistributed mass, combined with the Split Mass Construction, optimises the centre of gravity (CG), promoting higher launch, improved speed, and greater stability. The GT1 also incorporates the Speed Ring VFT Face, which enhances energy transfer by stabilising the perimeter for maximum ball speed on centre strikes. Meanwhile, Variable Face Thickness (VFT) ensures consistent performance across the entire face. With an adjustable back weight, golfers can fine-tune the club's headweight and swingweight to achieve the ideal balance of speed, launch, and control. SEAMLESS THERMOFORM CROWN Built from a revolutionary Proprietary Matrix Polymer, the GT1's ultra-lightweight crown enhances weight efficiency while maintaining the distinct feel and sound Titleist is known for. Its seamless wraparound design provides a sleek, confidence-boosting appearance at address. SPLIT MASS CONSTRUCTION A breakthrough in internal weighting technology, Split Mass Construction strategically redistributes weight within the clubhead. This innovative design places mass at the rear for higher launch and forward for optimised speed, spin, and forgiveness, resulting in explosive distance. DEEP, LOW CENTRE OF GRAVITY The GT1 features the deepest CG of any GT driver, promoting a high-launch, low-spin profile for increased carry distance. This optimised CG position also improves stability, helping golfers achieve straighter, more consistent drives. SPEED RING VFT FACE The GT1's face combines two key technologies for superior ball speed. The titanium Speed Ring stabilises the perimeter to generate maximum speed at the centre, while Variable Face Thickness (VFT) ensures high performance even on off-centre hits. CUSTOMISABLE STABILITY & WEIGHTING With an interchangeable back weight, the GT1 allows golfers to adjust headweight and swingweight for a tailored feel and performance. A professional fitting can help find the perfect weighting and shaft combination to optimise launch, ball speed, and consistency. Titleist GT1 Driver Specifications Feature Specification Loft 9.0, 10.0, 12.0 (RH/LH) Head 460cc Standard Length 45.5” Standard Lie 59.0° Weight Options 9 Gram (Nominal) w/ +6, +4, +2, -2, -4, -6 SureFit Hosel Compatible with GT, TSR, TSi, TS Titleist GT1 Driver Standard Shafts Shaft Launch Flex Weight Torque
Titleist GT1 Golf Driver Mens Left R Fujikura Air Speeder Next Gen 40g 10
Titleist GT1 Driver The Titleist GT1 Driver is engineered for exceptional speed and effortless launch, featuring a lightweight construction that enhances clubhead acceleration. Designed for players with moderate swing speeds, it includes a refined shaft and grip to maximise performance. For those preferring a more conventional setup, a standard model offers a 15-gram (+6) headweight, along with standard shaft and grip options. Its streamlined aerodynamics, including a reshaped crown, optimised sole contours, and shallower face, contribute to faster clubhead speeds and greater efficiency through the swing. Innovative materials and advanced weighting define the GT1 Driver . The Seamless Thermoform Crown, crafted from Titleist's exclusive Proprietary Matrix Polymer (PMP), reduces weight while preserving the brand's signature sound and feel. This redistributed mass, combined with the Split Mass Construction, optimises the centre of gravity (CG), promoting higher launch, improved speed, and greater stability. The GT1 also incorporates the Speed Ring VFT Face, which enhances energy transfer by stabilising the perimeter for maximum ball speed on centre strikes. Meanwhile, Variable Face Thickness (VFT) ensures consistent performance across the entire face. With an adjustable back weight, golfers can fine-tune the club's headweight and swingweight to achieve the ideal balance of speed, launch, and control. SEAMLESS THERMOFORM CROWN Built from a revolutionary Proprietary Matrix Polymer, the GT1's ultra-lightweight crown enhances weight efficiency while maintaining the distinct feel and sound Titleist is known for. Its seamless wraparound design provides a sleek, confidence-boosting appearance at address. SPLIT MASS CONSTRUCTION A breakthrough in internal weighting technology, Split Mass Construction strategically redistributes weight within the clubhead. This innovative design places mass at the rear for higher launch and forward for optimised speed, spin, and forgiveness, resulting in explosive distance. DEEP, LOW CENTRE OF GRAVITY The GT1 features the deepest CG of any GT driver, promoting a high-launch, low-spin profile for increased carry distance. This optimised CG position also improves stability, helping golfers achieve straighter, more consistent drives. SPEED RING VFT FACE The GT1's face combines two key technologies for superior ball speed. The titanium Speed Ring stabilises the perimeter to generate maximum speed at the centre, while Variable Face Thickness (VFT) ensures high performance even on off-centre hits. CUSTOMISABLE STABILITY & WEIGHTING With an interchangeable back weight, the GT1 allows golfers to adjust headweight and swingweight for a tailored feel and performance. A professional fitting can help find the perfect weighting and shaft combination to optimise launch, ball speed, and consistency. Titleist GT1 Driver Specifications Feature Specification Loft 9.0, 10.0, 12.0 (RH/LH) Head 460cc Standard Length 45.5” Standard Lie 59.0° Weight Options 9 Gram (Nominal) w/ +6, +4, +2, -2, -4, -6 SureFit Hosel Compatible with GT, TSR, TSi, TS Titleist GT1 Driver Standard Shafts Shaft Launch Flex Weight Torque
Titleist GT1 Golf Driver Mens Right R Fujikura Air Speeder Next Gen 40g 10
Titleist GT1 Driver The Titleist GT1 Driver is engineered for exceptional speed and effortless launch, featuring a lightweight construction that enhances clubhead acceleration. Designed for players with moderate swing speeds, it includes a refined shaft and grip to maximise performance. For those preferring a more conventional setup, a standard model offers a 15-gram (+6) headweight, along with standard shaft and grip options. Its streamlined aerodynamics, including a reshaped crown, optimised sole contours, and shallower face, contribute to faster clubhead speeds and greater efficiency through the swing. Innovative materials and advanced weighting define the GT1 Driver . The Seamless Thermoform Crown, crafted from Titleist's exclusive Proprietary Matrix Polymer (PMP), reduces weight while preserving the brand's signature sound and feel. This redistributed mass, combined with the Split Mass Construction, optimises the centre of gravity (CG), promoting higher launch, improved speed, and greater stability. The GT1 also incorporates the Speed Ring VFT Face, which enhances energy transfer by stabilising the perimeter for maximum ball speed on centre strikes. Meanwhile, Variable Face Thickness (VFT) ensures consistent performance across the entire face. With an adjustable back weight, golfers can fine-tune the club's headweight and swingweight to achieve the ideal balance of speed, launch, and control. SEAMLESS THERMOFORM CROWN Built from a revolutionary Proprietary Matrix Polymer, the GT1's ultra-lightweight crown enhances weight efficiency while maintaining the distinct feel and sound Titleist is known for. Its seamless wraparound design provides a sleek, confidence-boosting appearance at address. SPLIT MASS CONSTRUCTION A breakthrough in internal weighting technology, Split Mass Construction strategically redistributes weight within the clubhead. This innovative design places mass at the rear for higher launch and forward for optimised speed, spin, and forgiveness, resulting in explosive distance. DEEP, LOW CENTRE OF GRAVITY The GT1 features the deepest CG of any GT driver, promoting a high-launch, low-spin profile for increased carry distance. This optimised CG position also improves stability, helping golfers achieve straighter, more consistent drives. SPEED RING VFT FACE The GT1's face combines two key technologies for superior ball speed. The titanium Speed Ring stabilises the perimeter to generate maximum speed at the centre, while Variable Face Thickness (VFT) ensures high performance even on off-centre hits. CUSTOMISABLE STABILITY & WEIGHTING With an interchangeable back weight, the GT1 allows golfers to adjust headweight and swingweight for a tailored feel and performance. A professional fitting can help find the perfect weighting and shaft combination to optimise launch, ball speed, and consistency. Titleist GT1 Driver Specifications Feature Specification Loft 9.0, 10.0, 12.0 (RH/LH) Head 460cc Standard Length 45.5” Standard Lie 59.0° Weight Options 9 Gram (Nominal) w/ +6, +4, +2, -2, -4, -6 SureFit Hosel Compatible with GT, TSR, TSi, TS Titleist GT1 Driver Standard Shafts Shaft Launch Flex Weight Torque
Titleist GT1 Golf Driver Mens Left R Fujikura Air Speeder Next Gen 40g 9.0
Titleist GT1 Driver The Titleist GT1 Driver is engineered for exceptional speed and effortless launch, featuring a lightweight construction that enhances clubhead acceleration. Designed for players with moderate swing speeds, it includes a refined shaft and grip to maximise performance. For those preferring a more conventional setup, a standard model offers a 15-gram (+6) headweight, along with standard shaft and grip options. Its streamlined aerodynamics, including a reshaped crown, optimised sole contours, and shallower face, contribute to faster clubhead speeds and greater efficiency through the swing. Innovative materials and advanced weighting define the GT1 Driver . The Seamless Thermoform Crown, crafted from Titleist's exclusive Proprietary Matrix Polymer (PMP), reduces weight while preserving the brand's signature sound and feel. This redistributed mass, combined with the Split Mass Construction, optimises the centre of gravity (CG), promoting higher launch, improved speed, and greater stability. The GT1 also incorporates the Speed Ring VFT Face, which enhances energy transfer by stabilising the perimeter for maximum ball speed on centre strikes. Meanwhile, Variable Face Thickness (VFT) ensures consistent performance across the entire face. With an adjustable back weight, golfers can fine-tune the club's headweight and swingweight to achieve the ideal balance of speed, launch, and control. SEAMLESS THERMOFORM CROWN Built from a revolutionary Proprietary Matrix Polymer, the GT1's ultra-lightweight crown enhances weight efficiency while maintaining the distinct feel and sound Titleist is known for. Its seamless wraparound design provides a sleek, confidence-boosting appearance at address. SPLIT MASS CONSTRUCTION A breakthrough in internal weighting technology, Split Mass Construction strategically redistributes weight within the clubhead. This innovative design places mass at the rear for higher launch and forward for optimised speed, spin, and forgiveness, resulting in explosive distance. DEEP, LOW CENTRE OF GRAVITY The GT1 features the deepest CG of any GT driver, promoting a high-launch, low-spin profile for increased carry distance. This optimised CG position also improves stability, helping golfers achieve straighter, more consistent drives. SPEED RING VFT FACE The GT1's face combines two key technologies for superior ball speed. The titanium Speed Ring stabilises the perimeter to generate maximum speed at the centre, while Variable Face Thickness (VFT) ensures high performance even on off-centre hits. CUSTOMISABLE STABILITY & WEIGHTING With an interchangeable back weight, the GT1 allows golfers to adjust headweight and swingweight for a tailored feel and performance. A professional fitting can help find the perfect weighting and shaft combination to optimise launch, ball speed, and consistency. Titleist GT1 Driver Specifications Feature Specification Loft 9.0, 10.0, 12.0 (RH/LH) Head 460cc Standard Length 45.5” Standard Lie 59.0° Weight Options 9 Gram (Nominal) w/ +6, +4, +2, -2, -4, -6 SureFit Hosel Compatible with GT, TSR, TSi, TS Titleist GT1 Driver Standard Shafts Shaft Launch Flex Weight Torque
Titleist GT1 Golf Driver Mens Left R2 Fujikura Air Speeder Next Gen 40g 12
Titleist GT1 Driver The Titleist GT1 Driver is engineered for exceptional speed and effortless launch, featuring a lightweight construction that enhances clubhead acceleration. Designed for players with moderate swing speeds, it includes a refined shaft and grip to maximise performance. For those preferring a more conventional setup, a standard model offers a 15-gram (+6) headweight, along with standard shaft and grip options. Its streamlined aerodynamics, including a reshaped crown, optimised sole contours, and shallower face, contribute to faster clubhead speeds and greater efficiency through the swing. Innovative materials and advanced weighting define the GT1 Driver . The Seamless Thermoform Crown, crafted from Titleist's exclusive Proprietary Matrix Polymer (PMP), reduces weight while preserving the brand's signature sound and feel. This redistributed mass, combined with the Split Mass Construction, optimises the centre of gravity (CG), promoting higher launch, improved speed, and greater stability. The GT1 also incorporates the Speed Ring VFT Face, which enhances energy transfer by stabilising the perimeter for maximum ball speed on centre strikes. Meanwhile, Variable Face Thickness (VFT) ensures consistent performance across the entire face. With an adjustable back weight, golfers can fine-tune the club's headweight and swingweight to achieve the ideal balance of speed, launch, and control. SEAMLESS THERMOFORM CROWN Built from a revolutionary Proprietary Matrix Polymer, the GT1's ultra-lightweight crown enhances weight efficiency while maintaining the distinct feel and sound Titleist is known for. Its seamless wraparound design provides a sleek, confidence-boosting appearance at address. SPLIT MASS CONSTRUCTION A breakthrough in internal weighting technology, Split Mass Construction strategically redistributes weight within the clubhead. This innovative design places mass at the rear for higher launch and forward for optimised speed, spin, and forgiveness, resulting in explosive distance. DEEP, LOW CENTRE OF GRAVITY The GT1 features the deepest CG of any GT driver, promoting a high-launch, low-spin profile for increased carry distance. This optimised CG position also improves stability, helping golfers achieve straighter, more consistent drives. SPEED RING VFT FACE The GT1's face combines two key technologies for superior ball speed. The titanium Speed Ring stabilises the perimeter to generate maximum speed at the centre, while Variable Face Thickness (VFT) ensures high performance even on off-centre hits. CUSTOMISABLE STABILITY & WEIGHTING With an interchangeable back weight, the GT1 allows golfers to adjust headweight and swingweight for a tailored feel and performance. A professional fitting can help find the perfect weighting and shaft combination to optimise launch, ball speed, and consistency. Titleist GT1 Driver Specifications Feature Specification Loft 9.0, 10.0, 12.0 (RH/LH) Head 460cc Standard Length 45.5” Standard Lie 59.0° Weight Options 9 Gram (Nominal) w/ +6, +4, +2, -2, -4, -6 SureFit Hosel Compatible with GT, TSR, TSi, TS Titleist GT1 Driver Standard Shafts Shaft Launch Flex Weight Torque
Titleist GT1 Golf Driver Mens Left R Fujikura Air Speeder Next Gen 40g 12
Titleist GT1 Driver The Titleist GT1 Driver is engineered for exceptional speed and effortless launch, featuring a lightweight construction that enhances clubhead acceleration. Designed for players with moderate swing speeds, it includes a refined shaft and grip to maximise performance. For those preferring a more conventional setup, a standard model offers a 15-gram (+6) headweight, along with standard shaft and grip options. Its streamlined aerodynamics, including a reshaped crown, optimised sole contours, and shallower face, contribute to faster clubhead speeds and greater efficiency through the swing. Innovative materials and advanced weighting define the GT1 Driver . The Seamless Thermoform Crown, crafted from Titleist's exclusive Proprietary Matrix Polymer (PMP), reduces weight while preserving the brand's signature sound and feel. This redistributed mass, combined with the Split Mass Construction, optimises the centre of gravity (CG), promoting higher launch, improved speed, and greater stability. The GT1 also incorporates the Speed Ring VFT Face, which enhances energy transfer by stabilising the perimeter for maximum ball speed on centre strikes. Meanwhile, Variable Face Thickness (VFT) ensures consistent performance across the entire face. With an adjustable back weight, golfers can fine-tune the club's headweight and swingweight to achieve the ideal balance of speed, launch, and control. SEAMLESS THERMOFORM CROWN Built from a revolutionary Proprietary Matrix Polymer, the GT1's ultra-lightweight crown enhances weight efficiency while maintaining the distinct feel and sound Titleist is known for. Its seamless wraparound design provides a sleek, confidence-boosting appearance at address. SPLIT MASS CONSTRUCTION A breakthrough in internal weighting technology, Split Mass Construction strategically redistributes weight within the clubhead. This innovative design places mass at the rear for higher launch and forward for optimised speed, spin, and forgiveness, resulting in explosive distance. DEEP, LOW CENTRE OF GRAVITY The GT1 features the deepest CG of any GT driver, promoting a high-launch, low-spin profile for increased carry distance. This optimised CG position also improves stability, helping golfers achieve straighter, more consistent drives. SPEED RING VFT FACE The GT1's face combines two key technologies for superior ball speed. The titanium Speed Ring stabilises the perimeter to generate maximum speed at the centre, while Variable Face Thickness (VFT) ensures high performance even on off-centre hits. CUSTOMISABLE STABILITY & WEIGHTING With an interchangeable back weight, the GT1 allows golfers to adjust headweight and swingweight for a tailored feel and performance. A professional fitting can help find the perfect weighting and shaft combination to optimise launch, ball speed, and consistency. Titleist GT1 Driver Specifications Feature Specification Loft 9.0, 10.0, 12.0 (RH/LH) Head 460cc Standard Length 45.5” Standard Lie 59.0° Weight Options 9 Gram (Nominal) w/ +6, +4, +2, -2, -4, -6 SureFit Hosel Compatible with GT, TSR, TSi, TS Titleist GT1 Driver Standard Shafts Shaft Launch Flex Weight Torque
Titleist GT1 Golf Driver Mens Left R2 Fujikura Air Speeder Next Gen 40g 9.0
Titleist GT1 Driver The Titleist GT1 Driver is engineered for exceptional speed and effortless launch, featuring a lightweight construction that enhances clubhead acceleration. Designed for players with moderate swing speeds, it includes a refined shaft and grip to maximise performance. For those preferring a more conventional setup, a standard model offers a 15-gram (+6) headweight, along with standard shaft and grip options. Its streamlined aerodynamics, including a reshaped crown, optimised sole contours, and shallower face, contribute to faster clubhead speeds and greater efficiency through the swing. Innovative materials and advanced weighting define the GT1 Driver . The Seamless Thermoform Crown, crafted from Titleist's exclusive Proprietary Matrix Polymer (PMP), reduces weight while preserving the brand's signature sound and feel. This redistributed mass, combined with the Split Mass Construction, optimises the centre of gravity (CG), promoting higher launch, improved speed, and greater stability. The GT1 also incorporates the Speed Ring VFT Face, which enhances energy transfer by stabilising the perimeter for maximum ball speed on centre strikes. Meanwhile, Variable Face Thickness (VFT) ensures consistent performance across the entire face. With an adjustable back weight, golfers can fine-tune the club's headweight and swingweight to achieve the ideal balance of speed, launch, and control. SEAMLESS THERMOFORM CROWN Built from a revolutionary Proprietary Matrix Polymer, the GT1's ultra-lightweight crown enhances weight efficiency while maintaining the distinct feel and sound Titleist is known for. Its seamless wraparound design provides a sleek, confidence-boosting appearance at address. SPLIT MASS CONSTRUCTION A breakthrough in internal weighting technology, Split Mass Construction strategically redistributes weight within the clubhead. This innovative design places mass at the rear for higher launch and forward for optimised speed, spin, and forgiveness, resulting in explosive distance. DEEP, LOW CENTRE OF GRAVITY The GT1 features the deepest CG of any GT driver, promoting a high-launch, low-spin profile for increased carry distance. This optimised CG position also improves stability, helping golfers achieve straighter, more consistent drives. SPEED RING VFT FACE The GT1's face combines two key technologies for superior ball speed. The titanium Speed Ring stabilises the perimeter to generate maximum speed at the centre, while Variable Face Thickness (VFT) ensures high performance even on off-centre hits. CUSTOMISABLE STABILITY & WEIGHTING With an interchangeable back weight, the GT1 allows golfers to adjust headweight and swingweight for a tailored feel and performance. A professional fitting can help find the perfect weighting and shaft combination to optimise launch, ball speed, and consistency. Titleist GT1 Driver Specifications Feature Specification Loft 9.0, 10.0, 12.0 (RH/LH) Head 460cc Standard Length 45.5” Standard Lie 59.0° Weight Options 9 Gram (Nominal) w/ +6, +4, +2, -2, -4, -6 SureFit Hosel Compatible with GT, TSR, TSi, TS Titleist GT1 Driver Standard Shafts Shaft Launch Flex Weight Torque