103 results (0,18391 seconds)

Show all filters

Brand

Show all

Colour

Show all

Size

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Shell Naturelle S2 Hydraulic Fluid 46 Environmentally Acceptable Hydraulic Fluid 20L

Shell Naturelle S2 Hydraulic Fluid 46 Environmentally Acceptable Hydraulic Fluid 20L

Shell Naturelle S2 Hydraulic Fluid 46 is an advanced hydraulic fluid for use in hydraulic and power transmission systems. Readily biodegradable with low ecotoxicity, Shell Naturelle S2 Hydraulic Fluid is particularly suited for use in environmentally sensitive areas. Fully synthetic esters, blended with ash-less additives, provides Shell Naturelle S2 Hydraulic Fluid 46 with an excellent blend of lubrication performance and environmental acceptability.

GBP 309.99
1

Shell Naturelle S2 Hydraulic Fluid 15 Environmentally Acceptable Hydraulic Fluid 20L

Shell Naturelle S2 Hydraulic Fluid 15 Environmentally Acceptable Hydraulic Fluid 20L

Shell Naturelle S2 Hydraulic Fluid 15 is an advanced hydraulic fluid for use in hydraulic and power transmission systems. Readily biodegradable with low ecotoxicity, Shell Naturelle S2 Hydraulic Fluid is particularly suited for use in environmentally sensitive areas. Fully synthetic esters, blended with ash-less additives, provides Shell Naturelle S2 Hydraulic Fluid 15 with an excellent blend of lubrication performance and environmental acceptability.

GBP 359.99
1

Shell Naturelle S2 Hydraulic Fluid 32 Environmentally Acceptable Hydraulic Fluid 20L

Shell Naturelle S2 Hydraulic Fluid 32 Environmentally Acceptable Hydraulic Fluid 20L

Shell Naturelle S2 Hydraulic Fluid 32 is an advanced hydraulic fluid for use in hydraulic and power transmission systems. Readily biodegradable with low ecotoxicity, Shell Naturelle S2 Hydraulic Fluid is particularly suited for use in environmentally sensitive areas. Fully synthetic esters, blended with ash-less additives, provides Shell Naturelle S2 Hydraulic Fluid 32 with an excellent blend of lubrication performance and environmental acceptability.

GBP 309.99
1

Q8 Oils Brunel XF 343 Cutting Fluid 20LTR

Q8 Oils Brunel XF 343 Cutting Fluid 20LTR

Brunel XF 343 is a semi-synthetic, water-soluble cutting fluid suitable for machining in the aerospace industry. This excellent performing cutting fluid is designed to excel on ardous machining operations. Features and Benefits Synthetic lubricity additives are uniquely combined to provide an outstanding performance in aluminium machining Suitable for use in hard and soft water ares with excellent detergency and wetting characteristics resulting in long sump life and excellent fluid stability

GBP 169.99
1

Castrol Almaredge CB Souluble Metal-Working Fluid 20LTR

Castrol Almaredge CB Souluble Metal-Working Fluid 20LTR

Castrol Almaredge CB metalworking fluid contains an additive package that works in synergy to enhance machining performance and a chlorine, boron and biocide free surface finish.Features and Benefits Highly versatile product suitable for broad range of operations and materials Stable fluid appropriate for a wide range of water conditions Boron free fluid for improved residue characteristics and environmental compliance Nitrite and chlorine free to comply with waste treatment and environmental requirements Resists bacterial and fungal attack to reduce maintenance, machine downtime & extend fluid life Typical Applications Specifically designed for machining of yellow metals Cast iron, metals & steel Grinding Milling Tapping Reaming Turning & general machining

GBP 152.99
1

Mobil Evaporating Fluid 4286 Pail 20L

Mobil Evaporating Fluid 4286 Pail 20L

Mobil Evaporating Fluid 4286 is a premium quality specialized hydrocarbon oil formulated to meet the specific requirements of metal forming. It is an environmentally friendly alternative to traditional metal working fluids, and can improve tool life and eliminate the need for cleaning and degreasing. Mobil Evaporating Fluid 4286 is ideal for use in a variety of metal forming applications, including: Cold rolling Hot rolling Forging Extrusion Drawing Stamping It is also suitable for use in a variety of other applications, including: Metal finishing Machining Grinding Polishing Mobil Evaporating Fluid 4286 is a high-performance fluid that can provide a number of benefits to metal forming operations, including: Improved tool life Reduced friction Improved surface finish Reduced wear Increased productivity Reduced environmental impact Mobil Evaporating Fluid 4286 is a cost-effective and environmentally friendly solution for metal forming operations. It is available in a variety of sizes to meet the needs of any application. Features: Premium quality specialized hydrocarbon oil Environmentally friendly alternative to traditional metal working fluids Improves tool life Eliminates the need for cleaning and degreasing Ideal for a variety of metal forming applications Cost-effective and environmentally friendly Benefits: Improved tool life Reduced friction Improved surface finish Reduced wear Increased productivity Reduced environmental impact

GBP 149.99
1

Rocol Ultracut Evo 260 Max EP Cutting Fluid 20LTR

Rocol Ultracut Evo 260 Max EP Cutting Fluid 20LTR

Superior water mix, high performance, extreme pressure cutting fluid formulated to give long life in severe cutting operations where tool life is at a premium. Features and Benefits Versatile performance, suitable for use with difficult to machine alloys and a wide array of ferrous and non-ferrous metals Cost effective cutting fluid, dilution ratio between 20:1 and 40:1 Water mixed fluid that delivers long life and extreme pressure performance Typical Applications Metals

GBP 899.99
1

Dewatering Fluid 20 Litres

Dewatering Fluid 20 Litres

DFW 8101 Dewatering fluid/corrosion prevention has been formulated for speedy water displacement. Forming a highly effective, thin, oily waxy corrosion protective film. Features and Benefits Easy to use, rapid water displacement and corrosion preventive oil for increased productivity No removal prior to installation or start up for cost effective corrosion prevention Barium free dewatering fluid and corrosion preventive that produces a thin, oily film that considerably improves the performance of the product Selected additives for almost odourless formula Compatibility with a range of materials, all conventional motor and gear oils for versatile use Stable against both alkaline & acidic contamination, suitable for use in the galvanising industry Quick, easy removal by water based industrial cleaners and solvents High compatible with common lubricants to ensure removal is not always required Typical Applications Metal processing Notes Can be used in conjunction with VCI-products

GBP 123.99
1

Fuchs Eco-Cool R-AFc 1515L Metalworking Fluid 20LTR

Fuchs Eco-Cool R-AFc 1515L Metalworking Fluid 20LTR

EcoCool R - AFC 1515 L metalworking fluid is a high-quality, water-miscible cutting fluid designed for cast iron, nodular cast iron, steel, and aluminium alloys. This versatile fluid excels in a range of metalworking processes, producing a stable, fine emulsion when mixed with water. Carefully curated substances and high-pressure agents make it applicable for both steel and aluminium machining, to ensure optimal performance and precision. Features and Benefits Delivers optimal wetting, cooling, and flushing performance Keeps machines clean with its good washing effect Low foaming for a seamless operation Ensures that machines stay efficient with good filterability Minimises misting with its low-misting feature Universally applicable for both machining and grinding needs Typical Applications Turning Milling Grinding Reaming

GBP 149.99
1

Q8 Oils Berlioz XMR Fluid 20LTR

Q8 Oils Berlioz XMR Fluid 20LTR

Low odour milky soluble product with corrosion protection additives to protect both the work piece and the machine from rust and staining. Contains a powerful biocide to protect against bacterial and fungal infections. Recommended for all general light to medium machining operations, especially milling, drilling, boring, reaming, sawing and shaping of low tensile steels, non-ferrous and aluminium type materials. The product provides an excellent surface finish. Features and Benefits: Boron and Secondary amine free product Based on Renewable Resource raw materials Free from added chlorinated paraffin TRGS 611 compliant Low odour Protects against rust and staining Stable in all normal water conditions Designed to absorb tramp oil, helping prevent sticky machine surfaces Notes For information about health risks and maintaining fluid quality for water soluble cutting fluid see our Working With Metalworking Fluids Guide.

GBP 0.00
1

Mobil ATF 220 Premium Automatic Transmission Fluid Pail 20L

Mobil ATF 220 Premium Automatic Transmission Fluid Pail 20L

Mobil ATF 220 is a high performance, fluid for automatic transmissions in older vehicles specifying Dexron IID. It is also used as a hydraulic fluid in unique applications.Features and BenefitsMobil ATF 220 is formulated from high-quality conventional base oils combined with a special additive system including viscosity index improvers, antioxidants, and defoaments providing smooth and controlled friction/wear characteristics. The product provides consumers an excellent driving experience even in broad range of driving conditions in a wide variety of pre-1994 autoMobils. Key features and benefits include:Good thermal and oxidation stability - Resists lacquer, sludge and deposit formation to keeps transmissions clean for efficient operation over the fill lifeGood anti-wear properties - Meets the wear requirement to promote longer transmission lifeExcellent low-temperature fluidity - Assist in improved start-up and clean fast lubrication at low ambient temperaturesEffective foam control properties- Smooth and lasting shift feel and reduced fluid loss in severe service operating conditionsCompatible with all common seal materials used in Type IID transmissions - Maintains effective leakage controlApplicationsMobil ATF 220 is recommended for some automatic and manual transmissions in passenger cars and light trucks specifying Dexron IID level performance as well as the related power steering systems. It is also suitable for use in some special hydraulic systems in farm equipment and other installations having similar fluid requirements. It is recommended that the user consult the manufacturer's requirements. Other applications include: Off-highway transmissions power steering and other hydraulic systems requiring a Dexron IID or Allison C-4 fluid. Industrial hydraulic systems and components.

GBP 153.99
1

Mobil ATF 200 Premium Automatic Transmission Fluid Pail 20L

Mobil ATF 200 Premium Automatic Transmission Fluid Pail 20L

Mobil ATF 220 is a high performance, fluid for automatic transmissions in older vehicles specifying Dexron IID. It is also used as a hydraulic fluid in unique applications.Features and BenefitsMobil ATF 220 is formulated from high-quality conventional base oils combined with a special additive system including viscosity index improvers, antioxidants, and defoaments providing smooth and controlled friction/wear characteristics. The product provides consumers an excellent driving experience even in broad range of driving conditions in a wide variety of pre-1994 autoMobils. Key features and benefits include:Good thermal and oxidation stability - Resists lacquer, sludge and deposit formation to keeps transmissions clean for efficient operation over the fill lifeGood anti-wear properties - Meets the wear requirement to promote longer transmission lifeExcellent low-temperature fluidity - Assist in improved start-up and clean fast lubrication at low ambient temperaturesEffective foam control properties- Smooth and lasting shift feel and reduced fluid loss in severe service operating conditionsCompatible with all common seal materials used in Type IID transmissions - Maintains effective leakage controlApplicationsMobil ATF 220 is recommended for some automatic and manual transmissions in passenger cars and light trucks specifying Dexron IID level performance as well as the related power steering systems. It is also suitable for use in some special hydraulic systems in farm equipment and other installations having similar fluid requirements. It is recommended that the user consult the manufacturer's requirements. Other applications include: Off-highway transmissions power steering and other hydraulic systems requiring a Dexron IID or Allison C-4 fluid. Industrial hydraulic systems and components.

GBP 143.99
1

New Tech Lubes Food Safe Dismantling Fluid 20L

New Tech Lubes Food Safe Dismantling Fluid 20L

Food safe dismantling fluid is a semi-synthetic water clear, tasteless odourless and food safe lubricant. Devised to penetrate and aid in the dismantling of difficult fasteners and components. Features and Benefits Contains water dispersing hydrophobic oil that protects and lubricates metal surfaces from corrosion leaving a water-resistant coating ideal for use in wet areas Made using FDA listed ingredients - INS H1 registered Clean in use, water clear, tasteless, odourless fluid developed to disperses water, loosens dirt and grease on soiled surfaces Typical Applications Penetrate seized components Clean components and surfaces De-watering Lubricate delicate mechanisms, slides and pivots Food, beverage, pharmaceutical and clean environments Notes Range of sizes available

GBP 209.99
1

Mobil Pyrotec HFD-U 46 Fire-Resistant Hydraulic Fluid Pail 20L

Mobil Pyrotec HFD-U 46 Fire-Resistant Hydraulic Fluid Pail 20L

Mobil Pyrogard HFD 46 is a high performance fire resistant hydraulic fluid that is designed for use in electro-hydraulic governor control systems of steam turbines, including systems using fine tolerance servo valves. It is also recommended as a fire resistant lubricant in, for example, steam and gas turbines as well as a fire resistant fluid for hydraulic systems. Mobil Pyrogard HFD 46 is formulated with a blend of synthetic and mineral oils that provides excellent thermal and oxidation stability. It also has outstanding anti-corrosion and anti-wear properties that protect system components against wear and scuffing and help provide long equipment life. Mobil Pyrogard HFD 46 is FM approved as a fire resistant industrial fluid and has been evaluated in stringent tests for fire resistance. It will burn if the bulk fluid temperature reaches 368C and is exposed to an open flame. However, in the spray ignition hot manifold ignition test there is no flashing or burning at 704C. Mobil Pyrogard HFD 46 is compatible with seal and hose materials such as butyl rubber and Viton. It is also non-toxic and biodegradable. Mobil Pyrogard HFD 46 is the ideal choice for use in demanding applications where fire resistance is critical. It provides excellent performance and protection, and can help to extend the life of equipment. Here are some of the key benefits of using Mobil Pyrogard HFD 46: High performance fire resistant hydraulic fluid Designed for use in electro-hydraulic governor control systems of steam turbines Also recommended for use in steam and gas turbines as well as fire resistant hydraulic systems FM approved as a fire resistant industrial fluid Excellent thermal and oxidation stability Outstanding anti-corrosion and anti-wear properties Compatible with seal and hose materials such as butyl rubber and Viton Non-toxic and biodegradable If you are looking for a high performance fire resistant hydraulic fluid that can help to extend the life of your equipment, then Mobil Pyrogard HFD 46 is the ideal choice for you.

GBP 249.99
1

Q8 Oils Berlioz XVH Cutting Fluid 20LTR

Q8 Oils Berlioz XVH Cutting Fluid 20LTR

A medium mineral oil content fluid which will form a high quality stable translucent micro emulsion when mixed with water. Free from added formaldehyde, chlorine and secondary amines and compliant with the TRGS 611 specification. Contains excellent lubricity additives which have a high detergency, providing a high quality surface finish to the machined pieces. Suitable for use in soft and hard water areas resulting in fluid stability and long sump life. Designed for the heavy duty machining applications on ferrous and non-ferrous metals and especially suited for high pressure feed and speed machining on modern CNC machinery due to its low foaming capability. Also suited for aluminium machining including tapping applications. Features and Benefits A multipurpose high performance product suitable for both ferrous and non-ferrous metals Highly effective anti-corrosion ensuring protection to machine tools and components Forms a highly stable micro-emulsion resulting in extended fluid life High detergency results in excellent tramp oil rejection, high cleanliness and operator visibility Excellent wetting and detergency characteristics suitable for use in soft and hard water areas Extreme low foaming in all water conditions minimises spillages and waste Improves machine efficiency and reduces 'trip out' in automatic systems Free from formaldehyde, added chlorine and secondary for environmental compliance Standards TRGS 611 compliant

GBP 149.99
1

Q8 Oils Baroni XGP Cutting Fluid 20L

Q8 Oils Baroni XGP Cutting Fluid 20L

Q8 BARONI XGP is a versatile, water-mix cutting fluid formulated with a medium oil content and advanced lubricity additives to provide optimal tool life across a wide range of materials. When mixed with water, the fluid forms a semi-translucent to white opaque emulsion that is stable and long-lasting while it's bio-stable properties ensure that the emulsion does not degrade or produce bad odours, requiring minimal maintenance. Q8 BARONI XGP provides exceptional rust and corrosion protection without leaving sticky residues or sludges on machine parts. It is free from formaldehyde, chlorine, sulphur, cresols, phenols, and nitrites. Features and Benefits Advanced lubricity additives ensure extended tool life and excellent surface finishes Forms a stable, long-lasting emulsion when mixed with water Does not degrade or produce bad odours, requiring little to no maintenance Provides outstanding rust and corrosion protection without sticky residues or sludge deposits

GBP 0.00
1

Castrol Hysol XF Soluble Cutting Fluid - 20LTR

Castrol Hysol XF Soluble Cutting Fluid - 20LTR

Hysol XF is a chlorine free, long life, multipurpose soluble metalworking fluid for general-purpose machining, grinding and heavy-duty applications. Also suitable for aerospace aluminium alloys i.e. 2024 and 7075. Incorporates advanced additive technology to prevent fungal and bacterial infections ensuring exceptional sump life. The product is suitable for use in central coolant systems and single sump machines. Recommended concentrations: General machining operations 5%. Heavy duty operations 5 - 10%. Grinding operations 4%.

GBP 209.99
1

Rocol Ultracut 320 Cutting & Grinding Fluid, 20ltr

Rocol Ultracut 320 Cutting & Grinding Fluid, 20ltr

Ultracut 370 EP is a semi-synthetic fluid formulated for use on ferrous and non-ferrous metals, including aluminium. Features and Benefits Provides medium to heavy duty machining capabilities Promotes excellent tool life and leaves a smooth surface finish When mixed with water, it forms a translucent blue micro-emulsion, providing a clear view of the work-piece Compatible with both hard and soft water and is free from bactericide, silicone, chlorine, formaldehyde, nitrates and animal derived materials

GBP 799.99
1

Rocol Ultracut Cutting and Grinding Fluid, 20L

Rocol Ultracut Cutting and Grinding Fluid, 20L

Ultracut 370 EP is a semi-synthetic fluid formulated for use on ferrous and non-ferrous metals, including aluminium. Features and Benefits Provides medium to heavy duty machining capabilities Promotes excellent tool life and leaves a smooth surface finish When mixed with water, it forms a translucent blue micro-emulsion, providing a clear view of the work-piece Compatible with both hard and soft water and is free from bactericide, silicone, chlorine, formaldehyde, nitrates and animal derived materials

GBP 299.99
1

Mobilsol PM Detergent and Dispersant Fluid Pail 20L

Mobilsol PM Detergent and Dispersant Fluid Pail 20L

Mobilsol PM is a highly effective detergent and dispersant fluid that is designed to clean and protect lubrication systems. It is a synthetic fluid that is made with a blend of high-quality additives that work together to remove accumulated deposits, gummy oil oxidation products, and insoluble materials from reservoirs and pipework. This helps to restore the system's original operating efficiency and to improve equipment protection. Mobilsol PM is recommended for use in a variety of lubrication systems, including: Hydraulic systems Paper machine lubrication systems General circulation systems Open heating systems operating below 140C When used as directed, Mobilsol PM can help to: Improve system efficiency Reduce wear and tear on equipment Extend the life of lubrication systems Protect against corrosion Meet or exceed OEM specifications Mobilsol PM is a safe and effective way to clean and protect lubrication systems. It is backed by Mobil's global reputation for quality and performance. Order your bottle of Mobilsol PM today and experience the difference for yourself!

GBP 229.99
1