50 results (0,17949 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

PolyX Rafter Bar Intermediate Bar Self Supported - 2.5mtr White

PolyX Rafter Bar Intermediate Bar Self Supported - 2.5mtr White

Our PolyX Rafter Bar (Intermediate) for a Self Support System is used to join and support two polycarbonate sheets - fixing to a wall plate at one end and eaves beam at the other.The bar is extremely robust and can be used with any sheet thickness from 16mm to 35mm supporting spans up to 6 metres.The bar comes in two parts, the sheet is laid in place on the neoprene gasket and the snap cap is pushed down into position. Each bar comes complete with one end cap.

GBP 56.42
1

PolyX Rafter Bar Intermediate Bar Self Supported - 2mtr White

PolyX Rafter Bar Intermediate Bar Self Supported - 2mtr White

Our PolyX Rafter Bar (Intermediate) for a Self Support System is used to join and support two polycarbonate sheets - fixing to a wall plate at one end and eaves beam at the other.The bar is extremely robust and can be used with any sheet thickness from 16mm to 35mm supporting spans up to 6 metres.The bar comes in two parts, the sheet is laid in place on the neoprene gasket and the snap cap is pushed down into position. Each bar comes complete with one end cap.

GBP 45.06
1

PolyX Rafter Bar Intermediate Bar Self Supported - 3mtr White

PolyX Rafter Bar Intermediate Bar Self Supported - 3mtr White

Our PolyX Rafter Bar (Intermediate) for a Self Support System is used to join and support two polycarbonate sheets - fixing to a wall plate at one end and eaves beam at the other.The bar is extremely robust and can be used with any sheet thickness from 16mm to 35mm supporting spans up to 6 metres.The bar comes in two parts, the sheet is laid in place on the neoprene gasket and the snap cap is pushed down into position. Each bar comes complete with one end cap.

GBP 67.73
1

Composite Balustrade Surface Mount Newel andamp; Cap Kit - 1150mm Ash

Composite Balustrade Surface Mount Newel andamp; Cap Kit - 1150mm Ash

If youand#039;re looking to install a large balustrade system, our kits could be an ideal way to save money and order all your components in one.Our Part 2B kit contains a 1150mm Newel for ground-level installations, plus a Post Cap and Bolt Down Post Support to keep your balustrades strongly secured to your decking boards. A quick and efficient way to ensure youand#039;ve got all the products you need in one handy kit.Available in Ash, Autumn, Charcoal, Walnut and Graphite.

GBP 64.44
1

PolyX PVC Capped Rafter Bar Rafter Supported - 6mtr White

PolyX PVC Capped Rafter Bar Rafter Supported - 6mtr White

The PolyX PVC Capped Timber Supported Rafter Bar is probably our best seller when considering polycarbonate support options. 3 or 4 metre lengths are the most popular bars although these bars are also available in 2, 2.5, 5 or 6 metres.These bars can be used with polycarbonate sheets between 10mm and 25mm thick. The bar comes in two parts, the aluminium base is fixed to a timber (or metal) rafter and then the sheet is fitted in place before the top cap can be snapped down accordingly.Available in both white and brown.Further information on our rafter bars can be found in our Guides and Tips sectionhere.

GBP 52.74
1

PolyX PVC Capped Rafter Bar Rafter Supported - 5mtr White

PolyX PVC Capped Rafter Bar Rafter Supported - 5mtr White

The PolyX PVC Capped Timber Supported Rafter Bar is probably our best seller when considering polycarbonate support options. 3 or 4 metre lengths are the most popular bars although these bars are also available in 2, 2.5, 5 or 6 metres.These bars can be used with polycarbonate sheets between 10mm and 25mm thick. The bar comes in two parts, the aluminium base is fixed to a timber (or metal) rafter and then the sheet is fitted in place before the top cap can be snapped down accordingly.Available in both white and brown.Further information on our rafter bars can be found in our Guides and Tips sectionhere.

GBP 43.97
1

PolyX PVC Capped Rafter Bar Rafter Supported - 5mtr Brown

PolyX PVC Capped Rafter Bar Rafter Supported - 5mtr Brown

The PolyX PVC Capped Timber Supported Rafter Bar is probably our best seller when considering polycarbonate support options. 3 or 4 metre lengths are the most popular bars although these bars are also available in 2, 2.5, 5 or 6 metres.These bars can be used with polycarbonate sheets between 10mm and 25mm thick. The bar comes in two parts, the aluminium base is fixed to a timber (or metal) rafter and then the sheet is fitted in place before the top cap can be snapped down accordingly.Available in both white and brown.Further information on our rafter bars can be found in our Guides and Tips sectionhere.

GBP 43.97
1

100mm White Fascia Capping Board - 9mm x 5mtr - Pack of 4

100mm White Fascia Capping Board - 9mm x 5mtr - Pack of 4

Our 9mm Cover Boards are manufactured by FloPlast and are BBA Approved. They also carry Class 1 Fire Rating, which means that they are not easily ignitable and will not support the spread of flame. Cover Boards should be installed over sound existing timber or a new backing board using 2 x 50mm Polytop Nails at 600mm centres (400mm centres for coloured and woodgrain boards).FloPlast Cover Boards are measured externally. This means that when calculating what size you need, you need to make an allowance for the 9mm thickness of the bottom lip of the board. In simple terms, a 200mm board for example will cover 191mm of existing timber.

GBP 65.40
1

PolyX PVC Capped Rafter Bar Rafter Supported - 6mtr Brown

PolyX PVC Capped Rafter Bar Rafter Supported - 6mtr Brown

The PolyX PVC Capped Timber Supported Rafter Bar is probably our best seller when considering polycarbonate support options. 3 or 4 metre lengths are the most popular bars although these bars are also available in 2, 2.5, 5 or 6 metres.These bars can be used with polycarbonate sheets between 10mm and 25mm thick. The bar comes in two parts, the aluminium base is fixed to a timber (or metal) rafter and then the sheet is fitted in place before the top cap can be snapped down accordingly.Available in both white and brown.Further information on our rafter bars can be found in our Guides and Tips sectionhere.

GBP 52.74
1

175mm Dark Grey Smooth Fascia Capping Board - 10mm x 5mtr - Pack of 2

175mm Dark Grey Smooth Fascia Capping Board - 10mm x 5mtr - Pack of 2

This cover board is supplied in a 5-metre length and a smooth dark grey finish, the darkest shade of grey we offer in our cover board range.Cover Boards should be installed over sound existing timber or a new backing board using polytop nails.Unlike our FloPlast 9mm cover boards, Freefoamand#039;s cover boards have a 10mm thick bottom lip. Freefoam Cover BoardsFreefoamand#039;s cover boards are supplied in a variety of colours and sizes ranging from 175mm to 225mm. Freefoam recommend using N50 Plastop Plastic Headed Nails for capping over the cover board.Cover boards can be used for replacements or new builds, although it is advised to fit the cover board onto a timber backboard to ensure maximum security and support of the guttering and rainwater system.Freefoamand#039;s cover boards are BS EN 13245-2:2008 certified.

GBP 80.82
1

200mm White Ogee Fascia Capping Board - 9mm x 5mtr - Pack of 2

200mm White Ogee Fascia Capping Board - 9mm x 5mtr - Pack of 2

Our 9mm Ogee Cover boards are a more decorative version of a traditional 9mm White UPVC Cover Board, used for covering existing timber fascia or window boards. They are available in a range of sizes from 150mm to 250mm.We sell our Ogee cover boards in packs as this minimises the risk of any damage in transit.Ogee cover boards are generally used for covering existing timber fascias, but they are also used on new installations. In new build applications a timber backing board is used behind the cover board to support it along its length (we recommend 25mm thick sawn timber).Cover boards are measured externally including the bottom return leg, ie. a 200mm Cover board will cover 191mm of existing timber. The return leg measures 42mm overall (33mm Internal).Ogee cover boards should be fixed using 2 x 50mm Polytop Nails no further than 600mm apart. This means that you should allow 18 nails for each 5m length.

GBP 80.35
1

225mm Rosewood Fascia Capping Board - 9mm x 5mtr

225mm Rosewood Fascia Capping Board - 9mm x 5mtr

Our 9mm UPVC Cover Boards are available in five colour options - White, Black Ash, Anthracite Grey, Rosewood and Golden Oak. They come in a range of sizes from 100mm to 275mm (this varies depending upon the colour choice).Cover boards are generally used for covering existing timber fascia or window boards, but they are also used on new installations. In new build applications a timber backing board is used behind the cover board to support it along its length (we recommend 25mm thick sawn timber).Cover boards are measured externally including the bottom return leg, ie. a 200mm Cover board will cover 191mm of existing timber. The return leg measures 42mm overall (33mm Internal).PVC cover boards should be fixed using 2 x 50mm Polytop Nails no further than 600mm apart for white boards (max 400mm for woodgrain coloured boards). This means that you should allow 18 nails for each 5m length in white, and 26 for colours.

GBP 47.26
1

250mm White Ogee Fascia Capping Board - 9mm x 5mtr

250mm White Ogee Fascia Capping Board - 9mm x 5mtr

Our 9mm Ogee Cover boards are a more decorative version of a traditional 9mm White UPVC Cover Board, used for covering existing timber fascia or window boards. They are available in a range of sizes from 150mm to 250mm.We sell our Ogee cover boards in packs as this minimises the risk of any damage in transit.Ogee cover boards are generally used for covering existing timber fascias, but they are also used on new installations. In new build applications a timber backing board is used behind the cover board to support it along its length (we recommend 25mm thick sawn timber).Cover boards are measured externally including the bottom return leg, ie. a 200mm Cover board will cover 191mm of existing timber. The return leg measures 42mm overall (33mm Internal).Ogee cover boards should be fixed using 2 x 50mm Polytop Nails no further than 600mm apart. This means that you should allow 18 nails for each 5m length.

GBP 52.15
1

200mm Black Ash Woodgrain Fascia Capping Board - 9mm x 5mtr

200mm Black Ash Woodgrain Fascia Capping Board - 9mm x 5mtr

Our 9mm UPVC Cover Boards are available in five colour options - White, Black Ash, Anthracite Grey, Rosewood and Golden Oak. They come in a range of sizes from 100mm to 275mm (this varies depending upon the colour choice).Cover boards are generally used for covering existing timber fascia or window boards, but they are also used on new installations. In new build applications a timber backing board is used behind the cover board to support it along its length (we recommend 25mm thick sawn timber).Cover boards are measured externally including the bottom return leg, ie. a 200mm Cover board will cover 191mm of existing timber. The return leg measures 42mm overall (33mm Internal).PVC cover boards should be fixed using 2 x 50mm Polytop Nails no further than 600mm apart for white boards (max 400mm for woodgrain coloured boards). This means that you should allow 18 nails for each 5m length in white, and 26 for colours.

GBP 86.40
1

175mm Anthracite Grey Woodgrain Fascia Capping Board - 9mm x 5mtr

175mm Anthracite Grey Woodgrain Fascia Capping Board - 9mm x 5mtr

Our 9mm UPVC Cover Boards are available in five colour options - White, Black Ash, Anthracite Grey, Rosewood and Golden Oak. They come in a range of sizes from 100mm to 275mm (this varies depending upon the colour choice).Cover boards are generally used for covering existing timber fascia or window boards, but they are also used on new installations. In new build applications a timber backing board is used behind the cover board to support it along its length (we recommend 25mm thick sawn timber).Cover boards are measured externally including the bottom return leg, ie. a 200mm Cover board will cover 191mm of existing timber. The return leg measures 42mm overall (33mm Internal).PVC cover boards should be fixed using 2 x 50mm Polytop Nails no further than 600mm apart for white boards (max 400mm for woodgrain coloured boards). This means that you should allow 18 nails for each 5m length in white, and 26 for colours.

GBP 72.92
1

150mm White Ogee Fascia Capping Board - 9mm x 5mtr - Pack of 2

150mm White Ogee Fascia Capping Board - 9mm x 5mtr - Pack of 2

Our 9mm Ogee Cover boards are a more decorative version of a traditional 9mm White UPVC Cover Board, used for covering existing timber fascia or window boards. They are available in a range of sizes from 150mm to 250mm.We sell our Ogee cover boards in packs as this minimises the risk of any damage in transit.Ogee cover boards are generally used for covering existing timber fascias, but they are also used on new installations. In new build applications a timber backing board is used behind the cover board to support it along its length (we recommend 25mm thick sawn timber).Cover boards are measured externally including the bottom return leg, ie. a 200mm Cover board will cover 191mm of existing timber. The return leg measures 42mm overall (33mm Internal).Ogee cover boards should be fixed using 2 x 50mm Polytop Nails no further than 600mm apart. This means that you should allow 18 nails for each 5m length.

GBP 59.42
1

250mm Anthracite Grey Woodgrain Fascia Capping Board - 9mm x 5mtr

250mm Anthracite Grey Woodgrain Fascia Capping Board - 9mm x 5mtr

Our 9mm UPVC Cover Boards are available in five colour options - White, Black Ash, Anthracite Grey, Rosewood and Golden Oak. They come in a range of sizes from 100mm to 275mm (this varies depending upon the colour choice).Cover boards are generally used for covering existing timber fascia or window boards, but they are also used on new installations. In new build applications a timber backing board is used behind the cover board to support it along its length (we recommend 25mm thick sawn timber).Cover boards are measured externally including the bottom return leg, ie. a 200mm Cover board will cover 191mm of existing timber. The return leg measures 42mm overall (33mm Internal).PVC cover boards should be fixed using 2 x 50mm Polytop Nails no further than 600mm apart for white boards (max 400mm for woodgrain coloured boards). This means that you should allow 18 nails for each 5m length in white, and 26 for colours.

GBP 51.30
1

250mm Golden Oak Fascia Capping Board - 9mm x 5mtr

250mm Golden Oak Fascia Capping Board - 9mm x 5mtr

Our 9mm UPVC Cover Boards are available in five colour options - White, Black Ash, Anthracite Grey, Rosewood and Golden Oak. They come in a range of sizes from 100mm to 275mm (this varies depending upon the colour choice).Cover boards are generally used for covering existing timber fascia or window boards, but they are also used on new installations. In new build applications a timber backing board is used behind the cover board to support it along its length (we recommend 25mm thick sawn timber).Cover boards are measured externally including the bottom return leg, ie. a 200mm Cover board will cover 191mm of existing timber. The return leg measures 42mm overall (33mm Internal).PVC cover boards should be fixed using 2 x 50mm Polytop Nails no further than 600mm apart for white boards (max 400mm for woodgrain coloured boards). This means that you should allow 18 nails for each 5m length in white, and 26 for colours.

GBP 51.30
1

200mm Golden Oak Fascia Capping Board - 9mm x 5mtr

200mm Golden Oak Fascia Capping Board - 9mm x 5mtr

Our 9mm UPVC Cover Boards are available in five colour options - White, Black Ash, Anthracite Grey, Rosewood and Golden Oak. They come in a range of sizes from 100mm to 275mm (this varies depending upon the colour choice).Cover boards are generally used for covering existing timber fascia or window boards, but they are also used on new installations. In new build applications a timber backing board is used behind the cover board to support it along its length (we recommend 25mm thick sawn timber).Cover boards are measured externally including the bottom return leg, ie. a 200mm Cover board will cover 191mm of existing timber. The return leg measures 42mm overall (33mm Internal).PVC cover boards should be fixed using 2 x 50mm Polytop Nails no further than 600mm apart for white boards (max 400mm for woodgrain coloured boards). This means that you should allow 18 nails for each 5m length in white, and 26 for colours.

GBP 86.40
1

225mm White Ogee Fascia Capping Board - 9mm x 5mtr

225mm White Ogee Fascia Capping Board - 9mm x 5mtr

Our 9mm Ogee Cover boards are a more decorative version of a traditional 9mm White UPVC Cover Board, used for covering existing timber fascia or window boards. They are available in a range of sizes from 150mm to 250mm.We sell our Ogee cover boards in packs as this minimises the risk of any damage in transit.Ogee cover boards are generally used for covering existing timber fascias, but they are also used on new installations. In new build applications a timber backing board is used behind the cover board to support it along its length (we recommend 25mm thick sawn timber).Cover boards are measured externally including the bottom return leg, ie. a 200mm Cover board will cover 191mm of existing timber. The return leg measures 42mm overall (33mm Internal).Ogee cover boards should be fixed using 2 x 50mm Polytop Nails no further than 600mm apart. This means that you should allow 18 nails for each 5m length.

GBP 46.08
1

225mm White Fascia Capping Board - 9mm x 5mtr

225mm White Fascia Capping Board - 9mm x 5mtr

Our 9mm UPVC Cover Boards are available in five colour options - White, Black Ash, Anthracite Grey, Rosewood and Golden Oak. They come in a range of sizes from 100mm to 275mm (this varies depending upon the colour choice).Cover boards are generally used for covering existing timber fascia or window boards, but they are also used on new installations. In new build applications a timber backing board is used behind the cover board to support it along its length (we recommend 25mm thick sawn timber).Cover boards are measured externally including the bottom return leg, ie. a 200mm Cover board will cover 191mm of existing timber. The return leg measures 42mm overall (33mm Internal).PVC cover boards should be fixed using 2 x 50mm Polytop Nails no further than 600mm apart for white boards (max 400mm for woodgrain coloured boards). This means that you should allow 18 nails for each 5m length in white, and 26 for colours.

GBP 54.00
1

175mm Black Ash Woodgrain Fascia Capping Board - 9mm x 5mtr

175mm Black Ash Woodgrain Fascia Capping Board - 9mm x 5mtr

Our 9mm UPVC Cover Boards are available in five colour options - White, Black Ash, Anthracite Grey, Rosewood and Golden Oak. They come in a range of sizes from 100mm to 275mm (this varies depending upon the colour choice).Cover boards are generally used for covering existing timber fascia or window boards, but they are also used on new installations. In new build applications a timber backing board is used behind the cover board to support it along its length (we recommend 25mm thick sawn timber).Cover boards are measured externally including the bottom return leg, ie. a 200mm Cover board will cover 191mm of existing timber. The return leg measures 42mm overall (33mm Internal).PVC cover boards should be fixed using 2 x 50mm Polytop Nails no further than 600mm apart for white boards (max 400mm for woodgrain coloured boards). This means that you should allow 18 nails for each 5m length in white, and 26 for colours.

GBP 72.92
1

175mm White Ogee Fascia Capping Board - 9mm x 5mtr - Pack of 2

175mm White Ogee Fascia Capping Board - 9mm x 5mtr - Pack of 2

Our 9mm Ogee Cover boards are a more decorative version of a traditional 9mm White UPVC Cover Board, used for covering existing timber fascia or window boards. They are available in a range of sizes from 150mm to 250mm.We sell our Ogee cover boards in packs as this minimises the risk of any damage in transit.Ogee cover boards are generally used for covering existing timber fascias, but they are also used on new installations. In new build applications a timber backing board is used behind the cover board to support it along its length (we recommend 25mm thick sawn timber).Cover boards are measured externally including the bottom return leg, ie. a 200mm Cover board will cover 191mm of existing timber. The return leg measures 42mm overall (33mm Internal).Ogee cover boards should be fixed using 2 x 50mm Polytop Nails no further than 600mm apart. This means that you should allow 18 nails for each 5m length.

GBP 70.12
1