34 results (0,14934 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

PolyX Rafter Bar Intermediate Bar Self Supported - 6mtr White

PolyX Rafter Bar Intermediate Bar Self Supported - 6mtr White

Our PolyX Rafter Bar (Intermediate) for a Self Support System is used to join and support two polycarbonate sheets - fixing to a wall plate at one end and eaves beam at the other.The bar is extremely robust and can be used with any sheet thickness from 16mm to 35mm supporting spans up to 6 metres.The bar comes in two parts, the sheet is laid in place on the neoprene gasket and the snap cap is pushed down into position. Each bar comes complete with one end cap.

GBP 174.26
1

PolyX Rafter Bar Intermediate Bar Self Supported - 3.5mtr White

PolyX Rafter Bar Intermediate Bar Self Supported - 3.5mtr White

Our PolyX Rafter Bar (Intermediate) for a Self Support System is used to join and support two polycarbonate sheets - fixing to a wall plate at one end and eaves beam at the other.The bar is extremely robust and can be used with any sheet thickness from 16mm to 35mm supporting spans up to 6 metres.The bar comes in two parts, the sheet is laid in place on the neoprene gasket and the snap cap is pushed down into position. Each bar comes complete with one end cap.

GBP 101.65
1

PolyX Rafter Bar Intermediate Bar Self Supported - 4mtr White

PolyX Rafter Bar Intermediate Bar Self Supported - 4mtr White

Our PolyX Rafter Bar (Intermediate) for a Self Support System is used to join and support two polycarbonate sheets - fixing to a wall plate at one end and eaves beam at the other.The bar is extremely robust and can be used with any sheet thickness from 16mm to 35mm supporting spans up to 6 metres.The bar comes in two parts, the sheet is laid in place on the neoprene gasket and the snap cap is pushed down into position. Each bar comes complete with one end cap.

GBP 118.54
1

PolyX Rafter Bar End Bar Self Supported - 2.5mtr White

PolyX Rafter Bar End Bar Self Supported - 2.5mtr White

Our PolyX Rafter Bar (End Bar) for a Self Support System is used to finish polycarbonate sheeting.The end bar includes an adjustable adaptor to finish off the edge of the roof without the need for an additional F section or closer.The bar is extremely robust and can be used with any sheet thickness from 16mm to 35mm supporting spans up to 6 metres.The bar comes in two parts, the sheet is laid in place on the neoprene gasket and the snap cap is pushed down into position.

GBP 94.63
1

Composite Balustrade Surface Mount Newel andamp; Cap Kit - 1150mm Charcoal

Composite Balustrade Surface Mount Newel andamp; Cap Kit - 1150mm Charcoal

If youand#039;re looking to install a large balustrade system, our kits could be an ideal way to save money and order all your components in one.Our Part 2B kit contains a 1150mm Newel for ground-level installations, plus a Post Cap and Bolt Down Post Support to keep your balustrades strongly secured to your decking boards. A quick and efficient way to ensure youand#039;ve got all the products you need in one handy kit.Available in Ash, Autumn, Charcoal, Walnut and Graphite.

GBP 95.68
1

Composite Balustrade Surface Mount Newel andamp; Cap Kit - 1150mm Walnut

Composite Balustrade Surface Mount Newel andamp; Cap Kit - 1150mm Walnut

If youand#039;re looking to install a large balustrade system, our kits could be an ideal way to save money and order all your components in one.Our Part 2B kit contains a 1150mm Newel for ground-level installations, plus a Post Cap and Bolt Down Post Support to keep your balustrades strongly secured to your decking boards. A quick and efficient way to ensure youand#039;ve got all the products you need in one handy kit.Available in Ash, Autumn, Charcoal, Walnut and Graphite.

GBP 95.68
1

PolyX Rafter Bar End Bar Self Supported - 3mtr White

PolyX Rafter Bar End Bar Self Supported - 3mtr White

Our PolyX Rafter Bar (End Bar) for a Self Support System is used to finish polycarbonate sheeting.The end bar includes an adjustable adaptor to finish off the edge of the roof without the need for an additional F section or closer.The bar is extremely robust and can be used with any sheet thickness from 16mm to 35mm supporting spans up to 6 metres.The bar comes in two parts, the sheet is laid in place on the neoprene gasket and the snap cap is pushed down into position.

GBP 113.47
1

PolyX Rafter Bar End Bar Self Supported - 3.5mtr White

PolyX Rafter Bar End Bar Self Supported - 3.5mtr White

Our PolyX Rafter Bar (End Bar) for a Self Support System is used to finish polycarbonate sheeting.The end bar includes an adjustable adaptor to finish off the edge of the roof without the need for an additional F section or closer.The bar is extremely robust and can be used with any sheet thickness from 16mm to 35mm supporting spans up to 6 metres.The bar comes in two parts, the sheet is laid in place on the neoprene gasket and the snap cap is pushed down into position.

GBP 132.41
1

Composite Balustrade Surface Mount Newel andamp; Cap Kit - 1150mm Graphite

Composite Balustrade Surface Mount Newel andamp; Cap Kit - 1150mm Graphite

If youand#039;re looking to install a large balustrade system, our kits could be an ideal way to save money and order all your components in one.Our Part 2B kit contains a 1150mm Newel for ground-level installations, plus a Post Cap and Bolt Down Post Support to keep your balustrades strongly secured to your decking boards. A quick and efficient way to ensure youand#039;ve got all the products you need in one handy kit.Available in Ash, Autumn, Charcoal, Walnut and Graphite.

GBP 95.68
1

PolyX Rafter Bar End Bar Self Supported - 4mtr White

PolyX Rafter Bar End Bar Self Supported - 4mtr White

Our PolyX Rafter Bar (End Bar) for a Self Support System is used to finish polycarbonate sheeting.The end bar includes an adjustable adaptor to finish off the edge of the roof without the need for an additional F section or closer.The bar is extremely robust and can be used with any sheet thickness from 16mm to 35mm supporting spans up to 6 metres.The bar comes in two parts, the sheet is laid in place on the neoprene gasket and the snap cap is pushed down into position.

GBP 170.59
1

200mm Dark Grey Smooth Fascia Capping Board - 10mm x 5mtr - Pack of 2

200mm Dark Grey Smooth Fascia Capping Board - 10mm x 5mtr - Pack of 2

This cover board is supplied in a 5-metre length and a smooth dark grey finish, the darkest shade of grey we offer in our cover board range.Cover Boards should be installed over sound existing timber or a new backing board using polytop nails.Unlike our FloPlast 9mm cover boards, Freefoamand#039;s cover boards have a 10mm thick bottom lip. Freefoam Cover BoardsFreefoamand#039;s cover boards are supplied in a variety of colours and sizes ranging from 175mm to 225mm. Freefoam recommend using N50 Plastop Plastic Headed Nails for capping over the cover board.Cover boards can be used for replacements or new builds, although it is advised to fit the cover board onto a timber backboard to ensure maximum security and support of the guttering and rainwater system.Freefoamand#039;s cover boards are BS EN 13245-2:2008 certified.

GBP 99.73
1

225mm Dark Grey Smooth Fascia Capping Board - 10mm x 5mtr - Pack of 2

225mm Dark Grey Smooth Fascia Capping Board - 10mm x 5mtr - Pack of 2

This cover board is supplied in a 5-metre length and a smooth dark grey finish, the darkest shade of grey we offer in our cover board range.Cover Boards should be installed over sound existing timber or a new backing board using polytop nails.Unlike our FloPlast 9mm cover boards, Freefoamand#039;s cover boards have a 10mm thick bottom lip. Freefoam Cover BoardsFreefoamand#039;s cover boards are supplied in a variety of colours and sizes ranging from 175mm to 225mm. Freefoam recommend using N50 Plastop Plastic Headed Nails for capping over the cover board.Cover boards can be used for replacements or new builds, although it is advised to fit the cover board onto a timber backboard to ensure maximum security and support of the guttering and rainwater system.Freefoamand#039;s cover boards are BS EN 13245-2:2008 certified.

GBP 112.81
1

200mm Storm Grey Smooth Fascia Capping Board - 10mm x 5mtr - Pack of 2

200mm Storm Grey Smooth Fascia Capping Board - 10mm x 5mtr - Pack of 2

This cover board is supplied in a 5-metre length and a smooth storm grey finish, the lightest shade of grey we offer in our cover board range (RAL 7045).Cover Boards should be installed over sound existing timber or a new backing board using polytop nails .Unlike our FloPlast 9mm cover boards , Freefoamand#039;s cover boards have a 10mm thick bottom lip. Freefoam Cover BoardsFreefoamand#039;s cover boards are supplied in a variety of colours and sizes ranging from 175mm to 225mm. Freefoam recommend using N50 Plastop Plastic Headed Nails for capping over the cover board.Cover boards can be used for replacements or new builds, although it is advised to fit the cover board onto a timber backboard to ensure maximum security and support of the guttering and rainwater system.Freefoamand#039;s cover boards are BS EN 13245-2:2008 certified.

GBP 99.73
1

225mm Storm Grey Smooth Fascia Capping Board - 10mm x 5mtr - Pack of 2

225mm Storm Grey Smooth Fascia Capping Board - 10mm x 5mtr - Pack of 2

This cover board is supplied in a 5-metre length and a smooth storm grey finish, the lightest shade of grey we offer in our cover board range (RAL 7045).Cover Boards should be installed over sound existing timber or a new backing board using polytop nails .Unlike our FloPlast 9mm cover boards , Freefoamand#039;s cover boards have a 10mm thick bottom lip. Freefoam Cover BoardsFreefoamand#039;s cover boards are supplied in a variety of colours and sizes ranging from 175mm to 225mm. Freefoam recommend using N50 Plastop Plastic Headed Nails for capping over the cover board.Cover boards can be used for replacements or new builds, although it is advised to fit the cover board onto a timber backboard to ensure maximum security and support of the guttering and rainwater system.Freefoamand#039;s cover boards are BS EN 13245-2:2008 certified.

GBP 112.81
1

175mm Storm Grey Smooth Fascia Capping Board - 10mm x 5mtr - Pack of 2

175mm Storm Grey Smooth Fascia Capping Board - 10mm x 5mtr - Pack of 2

This cover board is supplied in a 5-metre length and a smooth storm grey finish, the lightest shade of grey we offer in our cover board range (RAL 7045).Cover Boards should be installed over sound existing timber or a new backing board using polytop nails .Unlike our FloPlast 9mm cover boards , Freefoamand#039;s cover boards have a 10mm thick bottom lip. Freefoam Cover BoardsFreefoamand#039;s cover boards are supplied in a variety of colours and sizes ranging from 175mm to 225mm. Freefoam recommend using N50 Plastop Plastic Headed Nails for capping over the cover board.Cover boards can be used for replacements or new builds, although it is advised to fit the cover board onto a timber backboard to ensure maximum security and support of the guttering and rainwater system.Freefoamand#039;s cover boards are BS EN 13245-2:2008 certified.

GBP 89.81
1

250mm Black Ash Woodgrain Fascia Capping Board - 9mm x 5mtr

250mm Black Ash Woodgrain Fascia Capping Board - 9mm x 5mtr

Our 9mm UPVC Cover Boards are available in five colour options - White, Black Ash, Anthracite Grey, Rosewood and Golden Oak. They come in a range of sizes from 100mm to 275mm (this varies depending upon the colour choice).Cover boards are generally used for covering existing timber fascia or window boards, but they are also used on new installations. In new build applications a timber backing board is used behind the cover board to support it along its length (we recommend 25mm thick sawn timber).Cover boards are measured externally including the bottom return leg, ie. a 200mm Cover board will cover 191mm of existing timber. The return leg measures 42mm overall (33mm Internal).PVC cover boards should be fixed using 2 x 50mm Polytop Nails no further than 600mm apart for white boards (max 400mm for woodgrain coloured boards). This means that you should allow 18 nails for each 5m length in white, and 26 for colours.

GBP 102.60
1

225mm Black Ash Woodgrain Fascia Capping Board - 9mm x 5mtr

225mm Black Ash Woodgrain Fascia Capping Board - 9mm x 5mtr

Our 9mm UPVC Cover Boards are available in five colour options - White, Black Ash, Anthracite Grey, Rosewood and Golden Oak. They come in a range of sizes from 100mm to 275mm (this varies depending upon the colour choice).Cover boards are generally used for covering existing timber fascia or window boards, but they are also used on new installations. In new build applications a timber backing board is used behind the cover board to support it along its length (we recommend 25mm thick sawn timber).Cover boards are measured externally including the bottom return leg, ie. a 200mm Cover board will cover 191mm of existing timber. The return leg measures 42mm overall (33mm Internal).PVC cover boards should be fixed using 2 x 50mm Polytop Nails no further than 600mm apart for white boards (max 400mm for woodgrain coloured boards). This means that you should allow 18 nails for each 5m length in white, and 26 for colours.

GBP 94.52
1

225mm White Ogee Fascia Capping Board - 9mm x 5mtr - Pack of 2

225mm White Ogee Fascia Capping Board - 9mm x 5mtr - Pack of 2

Our 9mm Ogee Cover boards are a more decorative version of a traditional 9mm White UPVC Cover Board, usedÂandnbsp;for covering existing timber fascia or window boards. They are available in a range of sizes from 150mm to 250mm.We sell our Ogee cover boards in packs as this minimises the risk of any damage in transit.Ogee cover boards are generally used for covering existing timber fascias, but they are also used on new installations. In new build applications a timber backing board is used behind the cover board to support it along its length (we recommend 25mm thick sawn timber).Cover boards are measured externally including the bottom return leg, ie. a 200mm Cover board will cover 191mm of existing timber. The return leg measures 42mm overall (33mm Internal).Ogee cover boards should be fixed using 2 x 50mm Polytop Nails no further than 600mm apart. This means that you should allow 18 nails for each 5m length.

GBP 92.17
1

225mm Anthracite Grey Woodgrain Fascia Capping Board - 9mm x 5mtr

225mm Anthracite Grey Woodgrain Fascia Capping Board - 9mm x 5mtr

Our 9mm UPVC Cover Boards are available in five colour options - White, Black Ash, Anthracite Grey, Rosewood and Golden Oak. They come in a range of sizes from 100mm to 275mm (this varies depending upon the colour choice).Cover boards are generally used for covering existing timber fascia or window boards, but they are also used on new installations. In new build applications a timber backing board is used behind the cover board to support it along its length (we recommend 25mm thick sawn timber).Cover boards are measured externally including the bottom return leg, ie. a 200mm Cover board will cover 191mm of existing timber. The return leg measures 42mm overall (33mm Internal).PVC cover boards should be fixed using 2 x 50mm Polytop Nails no further than 600mm apart for white boards (max 400mm for woodgrain coloured boards). This means that you should allow 18 nails for each 5m length in white, and 26 for colours.

GBP 94.52
1

250mm Rosewood Fascia Capping Board - 9mm x 5mtr

250mm Rosewood Fascia Capping Board - 9mm x 5mtr

Our 9mm UPVC Cover Boards are available in five colour options - White, Black Ash, Anthracite Grey, Rosewood and Golden Oak. They come in a range of sizes from 100mm to 275mm (this varies depending upon the colour choice).Cover boards are generally used for covering existing timber fascia or window boards, but they are also used on new installations. In new build applications a timber backing board is used behind the cover board to support it along its length (we recommend 25mm thick sawn timber).Cover boards are measured externally including the bottom return leg, ie. a 200mm Cover board will cover 191mm of existing timber. The return leg measures 42mm overall (33mm Internal).PVC cover boards should be fixed using 2 x 50mm Polytop Nails no further than 600mm apart for white boards (max 400mm for woodgrain coloured boards). This means that you should allow 18 nails for each 5m length in white, and 26 for colours.

GBP 102.60
1

250mm White Ogee Fascia Capping Board - 9mm x 5mtr - Pack of 2

250mm White Ogee Fascia Capping Board - 9mm x 5mtr - Pack of 2

Our 9mm Ogee Cover boards are a more decorative version of a traditional 9mm White UPVC Cover Board, used for covering existing timber fascia or window boards. They are available in a range of sizes from 150mm to 250mm.We sell our Ogee cover boards in packs as this minimises the risk of any damage in transit.Ogee cover boards are generally used for covering existing timber fascias, but they are also used on new installations. In new build applications a timber backing board is used behind the cover board to support it along its length (we recommend 25mm thick sawn timber).Cover boards are measured externally including the bottom return leg, ie. a 200mm Cover board will cover 191mm of existing timber. The return leg measures 42mm overall (33mm Internal).Ogee cover boards should be fixed using 2 x 50mm Polytop Nails no further than 600mm apart. This means that you should allow 18 nails for each 5m length.

GBP 104.30
1

225mm Golden Oak Fascia Capping Board - 9mm x 5mtr

225mm Golden Oak Fascia Capping Board - 9mm x 5mtr

Our 9mm UPVC Cover Boards are available in five colour options - White, Black Ash, Anthracite Grey, Rosewood and Golden Oak. They come in a range of sizes from 100mm to 275mm (this varies depending upon the colour choice).Cover boards are generally used for covering existing timber fascia or window boards, but they are also used on new installations. In new build applications a timber backing board is used behind the cover board to support it along its length (we recommend 25mm thick sawn timber).Cover boards are measured externally including the bottom return leg, ie. a 200mm Cover board will cover 191mm of existing timber. The return leg measures 42mm overall (33mm Internal).PVC cover boards should be fixed using 2 x 50mm Polytop Nails no further than 600mm apart for white boards (max 400mm for woodgrain coloured boards). This means that you should allow 18 nails for each 5m length in white, and 26 for colours.

GBP 94.52
1

225mm Black Ash Woodgrain Fascia Capping Board - 9mm x 5mtr - Pack of 2

225mm Black Ash Woodgrain Fascia Capping Board - 9mm x 5mtr - Pack of 2

Our 9mm UPVC Cover Boards are available in five colour options - White, Black Ash, Anthracite Grey, Rosewood and Golden Oak. They come in a range of sizes from 100mm to 275mm (this varies depending upon the colour choice).We sell our Cover boards in packs as this minimises the risk of any damage in transit.Cover boards are generally used for covering existing timber fascia or window boards, but they are also used on new installations. In new build applications a timber backing board is used behind the cover board to support it along its length (we recommend 25mm thick sawn timber).Cover boards are measured externally including the bottom return leg, ie. a 200mm Cover board will cover 191mm of existing timber. The return leg measures 42mm overall (33mm Internal).PVC cover boards should be fixed using 2 x 50mm Polytop Nails no further than 600mm apart for white boards (max 400mm for woodgrain coloured boards). This means that you should allow 18 nails for each 5m length in white, and 26 for colours.

GBP 94.50
1

250mm Rosewood Fascia Capping Board - 9mm x 5mtr - Pack of 2

250mm Rosewood Fascia Capping Board - 9mm x 5mtr - Pack of 2

Our 9mm UPVC Cover Boards are available in five colour options - White, Black Ash, Anthracite Grey, Rosewood and Golden Oak. They come in a range of sizes from 100mm to 275mm (this varies depending upon the colour choice).We sell our Cover boards in packs as this minimises the risk of any damage in transit.Cover boards are generally used for covering existing timber fascia or window boards, but they are also used on new installations. In new build applications a timber backing board is used behind the cover board to support it along its length (we recommend 25mm thick sawn timber).Cover boards are measured externally including the bottom return leg, ie. a 200mm Cover board will cover 191mm of existing timber. The return leg measures 42mm overall (33mm Internal).PVC cover boards should be fixed using 2 x 50mm Polytop Nails no further than 600mm apart for white boards (max 400mm for woodgrain coloured boards). This means that you should allow 18 nails for each 5m length in white, and 26 for colours.

GBP 102.60
1

250mm Golden Oak Fascia Capping Board - 9mm x 5mtr - Pack of 2

250mm Golden Oak Fascia Capping Board - 9mm x 5mtr - Pack of 2

Our 9mm UPVC Cover Boards are available in five colour options - White, Black Ash, Anthracite Grey, Rosewood and Golden Oak. They come in a range of sizes from 100mm to 275mm (this varies depending upon the colour choice).We sell our Cover boards in packs as this minimises the risk of any damage in transit.Cover boards are generally used for covering existing timber fascia or window boards, but they are also used on new installations. In new build applications a timber backing board is used behind the cover board to support it along its length (we recommend 25mm thick sawn timber).Cover boards are measured externally including the bottom return leg, ie. a 200mm Cover board will cover 191mm of existing timber. The return leg measures 42mm overall (33mm Internal).PVC cover boards should be fixed using 2 x 50mm Polytop Nails no further than 600mm apart for white boards (max 400mm for woodgrain coloured boards). This means that you should allow 18 nails for each 5m length in white, and 26 for colours.

GBP 102.60
1