Fremgang.nu | Google Ads-bureau

Dry Verge Eaves Starter - Terracota

This universal starter, or eaves closure as it is often referred to as, is used at the eaves to ensure that the system is fully closed at the bottom of the verge.The first dry verge unit is secured onto the eaves starter via a clip that engages with the outer fins of the eaves starter unit.

GBP 3.29

1

Dry Verge Eaves Starter - Grey

This universal starter, or eaves closure as it is often referred to as, is used at the eaves to ensure that the system is fully closed at the bottom of the verge.The first dry verge unit is secured onto the eaves starter via a clip that engages with the outer fins of the eaves starter unit.

GBP 3.29

1

Dry Verge Eaves Starter - Brown

This universal starter, or eaves closure as it is often referred to as, is used at the eaves to ensure that the system is fully closed at the bottom of the verge.The first dry verge unit is secured onto the eaves starter via a clip that engages with the outer fins of the eaves starter unit.

GBP 3.29

1

Composite Decking Forte Plastic Shim - 5mm

Decking shims are used as spacers in order to make gaps even and alignment correct with decking boards and trims.

GBP 0.39

1

Tapco Composite Slate Roof Tile - 305mm x 445mm Grey

TapcoSlate Classic roofing is a ultimate solution to tile roofing on domestic and commercial properties. Each individual tile features pre-marked screw andamp; fixings guides as well as horizontal spacers (5mm each side, making 305mm overall) on each side of the tile to inform the installer how close the tiles should be placed next to each other. These features make the installation process even easier and faster.If needed, these tiles, as well as the ridges can be cut with a fine-toothed handsaw or a jigsaw. A fully installed composite roofing system is impermeable; it is BBA approved, has a BROOF(t4) designation, EN15601 wind rated (at 12 and 14 degrees) and has a Class IV hail rating, making it a great alternative to traditional slate, while being easier to handle and install.Click here to view our full installation guide for composite slate roofing tiles.Roof PitchGaugeTiles Per Square Metre12 to 25 degreesandnbsp;152mm2225 to 27.5 degrees165mm2027.5 to 30 degrees178mm1930 to 70 degrees191mm18andnbsp;

GBP 3.46

1

White Fascia Capping Board End Cap - 50mm

End caps are used to seal off the cellular core of any cut board that is exposed, ie. where it is not covered by a joint or corner trim. 50mm end caps are most commonly used when the board itself is being used as an internal window board rather than a fascia board.End caps can be cut to size with a hacksaw as required. They are fixed to the end of the board using our industrial superglue and activator.

GBP 1.05

1

Black Ash Fascia Capping Board End Cap - 50mm

End caps are used to seal off the cellular core of any cut board that is exposed, ie. where it is not covered by a joint or corner trim.50mm end caps are most commonly used when the board itself is being used as an internal window board rather than a fascia board.End caps can be cut to size with a hacksaw as required. They are fixed to the end of the board using our industrial superglue and activator.

GBP 3.81

1

Rosewood Fascia Capping Board End Cap - 50mm

End caps are used to seal off the cellular core of any cut board that is exposed, ie. where it is not covered by a joint or corner trim.50mm end caps are most commonly used when the board itself is being used as an internal window board rather than a fascia board.End caps can be cut to size with a hacksaw as required. They are fixed to the end of the board using our industrial superglue and activator.

GBP 3.81

1

Laminating Brush - 2andquot;

These 2andquot; laminating brushes can be used for application of resin and moulding to shape in difficult to access areas, also useful for topcoating detailing such as bottom lip trims.Take a quick look at our installation video:

GBP 1.43

1

Laminating Brush - 4andquot;

These 4andquot; laminating brushes can be used for application of resin and moulding to shape in difficult to access areas, also useful for topcoating detailing such as bottom lip trims.Take a quick look at our installation video:

GBP 2.86

1

Laminating Brush - 3andquot;

These 3andquot; laminating brushes can be used for application of resin and moulding to shape in difficult to access areas, also useful for topcoating detailing such as bottom lip trims. Take a quick look at our installation video:

GBP 2.16

1