21 results (0,15089 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Nuaire - AB-WM1 MRXBOX95 Unit

Nuaire - AB-WM1 MRXBOX95 Unit

Nuaire MRXBOXAB-WM1 Opposite Handed MRXBOXAB-WM1-OH Description The Nuaire MRXBOXAB-WM1 provides a maximum flow rate of 125m3/hr suitable for a house up to 73m2 floor area with up to 2 kitchens & bathrooms(no digital controller or humidity sensor is available for this model)The Nuaire MRXBOX range has been in continual improvement and production in the UK for over 15years providing a high performance, wall-mounted MVHR unit which is specifically designed to provide areliable but simple to operate system for social housing, developments and end usersBPC Ventilation are the largest independent MVHR specialists and supply this unit with up to a 5-yearparts warranty* and lifetime technical support on our top-quality systems Filtration 2 x G4 filters are fitted to the unit that are easy and inexpensive to replace(The filters are provided with plastic covers that should be removed before starting unit for first time) CONTROL OPTIONS The Nuaire MRXBOX units are controlled by one of the following:We also advise an optional boost switch should be used local to the wet rooms 4 x adjustable switches on the front of the unit Manual control Via optional 3 speed manual switch Additional external sensors achieving on-demand ventilation Switched live signal from light/remote switches Heat Exchanger This unit has a high-quality PVC counterflow heat exchanger with up to a 86% thermal efficiency protected with high-capacity filters on each side The heat exchanger is easy to remove for maintenance and any accumulated condensation is easily dispersed via a drain at the bottom of the unit Frost Protection In the event of the intake air temperature at the unit dropping below the predetermined set point (-5°C as standard) the supply fan will reduce to minimum speed, once the temperature rises above the set point the fan will return to its commissioned speed. Frost protection will only activate after ten days of continuous run time. Summer By-Pass The Nuaire AB units have a 100% summer by-Pass If the indoor temperature Intake exceeds 25°C and the outdoor temperature is within comfort zones the summer by-pass is opened automatically to help provide a comfortable indoor temperature Orientation The Nuaire units can be right or left-handed and correct orientation should be checked before purchase Construction Manufactured of powder coated galvanised steel outer cover for durability and an inside EPP lining for quietness and efficiency Mounting The Nuaire units are wall mounted as standard and are supplied with a wall bracket    

GBP 971.28
1

Nuaire AB-ECO-LP2 Ceiling Void Horizontal MVHR Unit

Nuaire AB-ECO-LP2 Ceiling Void Horizontal MVHR Unit

Nuaire ceiling void unit - ECO-LP2 Nuaire ceiling void unit Opposite hand - ECO-LP2-OH Description The new MRXBOXAB-ECO-LP2 is a Low-Profile ceiling mounted unit that is specificallydesigned to fit easily into apartments with ceiling void restrictions of only 200mm and has a high performance of 285m3/hr with low SFP of 0.56 wls Controllability is provided by optional room sensors or switches (no digital controller is available for this model) The Nuaire MRXBOX range has been in continual improvement and production in the UK for over 15 years providing a high performance, wall-mounted MVHR unit which is specifically designed to provide a reliable but simple to operate system for social housing, developments and end users BPC Ventilation are the largest independent MVHR specialists and supply this unit with up to a 5-year parts warranty* and lifetime technical support on our top-quality systems, KEY FEATURES – Nuaire AB-ECO-LP2 Suitable for floor areas up to 170m2 Delivers an airflow rate of up to 285 m³/hour @ 100 Pa High heat recovery efficiency of up to 79%. 100% summer by-pass On demand control via optional room or duct sensor options Full 100% automatic summer bypass to supply unheated air in the summer Sap Appendix Q (BRE) approved 2 x G3 filters Galvanised steel casing with EPP internal lining 2-year warranty* (Listed parts Only) 'A' energy rating Left hand right oriented models available UK/CA marked Surge protected Filtration 2 x G3 filters are fitted to the unit that are easy and inexpensive to replace (The filters are provided with plastic covers that should be removed before starting unit for first time) CONTROL OPTIONS The Nuaire MRXBOX units are controlled by one of the following: Manual 100% adjustment of background and boost speeds 4 x adjustable switches on the front of the unit Manual control Via optional 3 speed manual switch Additional external sensors achieving on-demand ventilation Switched live signal from light/remote switches Heat Exchanger This unit has a high-quality PVC counterflow heat exchanger with up to a 90% thermal efficiency protected with high-capacity filters on each side The heat exchanger is easy to remove for maintenance and any accumulated condensation is easily dispersed via a drain at the bottom of the unit Frost Protection In the event of the intake air temperature at the unit dropping below the predetermined set point (-5°C as standard) the supply fan will reduce to minimum speed, once the temperature rises above the set point the fan will return to its commissioned speed. Frost protection will only activate after ten days of continuous run time. Summer By-Pass The Nuaire AB units have a 100% summer by-Pass If the indoor temperature Intake exceeds 25°C and the outdoor temperature is within comfort zones the summer by-pass is opened automatically to help provide a comfortable indoor temperature Orientation The Nuaire units can be right or left-handed and correct orientation should be checked before purchase Construction Manufactured of powder coated galvanised steel outer cover for durability and an inside EPP lining for quietness and efficiency

GBP 1692.20
1

Komfovent R600V Rotary wheel vertical unit (use C6 controller)

Komfovent R600V Rotary wheel vertical unit (use C6 controller)

Description Komfovent R600 V Left Hand 1151739 Komfovent R600 V Right Hand 1151738 The Komfovent Domekt R-600-V heat recovery unit is a high-quality floor / ceiling mounted rotary wheel unit suitable for new houses up to 390m2 that has advanced Wi-Fi controllability and are suitable for very cold climates of down to -30° This unit has an (A+) energy rating BPC Ventilation are the largest independent MVHR specialists and supply lifetime technical support on our top-quality systems, Key features- Komfovent R600 V Interactive Wi-Fi Smart control Passive house approved C6M Digital controller* Next Generation rotary heat exchanger Suitable for home sizes up to 390m2 Airflow rate @100Pa – 669 m3/h Optional direct connection to kitchen cooker hood Super Quiet with insulated construction No drain or pre-heater required Highly efficient EC fans 100% summer bypass M5 filtration ‘A+’ energy rating High heat recovery efficiency of up to 84%. On demand control via optional room or duct sensor options Fireplace and holiday settings CAV -VAV-DCV airflow control Plug and play easy installation Optional Humidity control Optional F7 filtration Controllability The Domekt units feature an integrated smart control system allowing you to control your system without constant adjustments via the Komfovent Home application on your home computer or mobile device, the unit also has an additional hard wired digital remote control if required App Control Wall controller (optional) 8 preset modes. Intelligent energy saving algorithms. Automatic air quality control with optional AQ sensor. Extensive weekly schedule. External Control Ability to control via a web browser for remote monitoring and repair Integration into a smart home management system. (BMS) parameters by connecting additional sensors. Optional wall controller 0-10v and 0v connections Optional boost switch Optional humidity sensor (duct mounted) BMS Control Implemented BACnet and Modbus protocols enable simple connection into Building Management System as a result whole buildings engineering systems can be controlled at a single access point. Construction Domekt heat recovery units are double protected from corrosion. The units are constructed of galvanised steel with a powder coated finish (RAL9003) and EPP internal casing, The airtight doors are 50mm thick with thermal locks Motors The fan motors are low energy EC fans of A+ rating and are protected from humidity and dust as well as being equipped with long-life bearings Filtration 2 x G5 filters are fitted to the unit that are easy to replace Optional F7 to air supply Summer By-Pass The Komfovent range of units have a 100% summer by-Pass If the indoor temperature Intake exceeds 25°C and the outdoor temperature is within comfort zones the summer by-pass is opened automatically to help provide a comfortable indoor temperature Low Noise Levels With airtight, aerodynamic and sound absorbing construction with perfectly balanced fans the noise levels are ultra quiet Heat Exchanger Frost Protection There is no condensation drain and Frost protection is not required unless below - 20° Orientation The units can be right or left-handed and correct orientation should be checked before purchase Construction Manufactured of powder coated galvanised steel outer cover for durability and an inside EPP lining for quietness and efficiency Mounting The units are wall mounted as standard and are supplied with a wall bracket Accessories 712201292           Komfovent SIPHON for Condensate Drain DN32 745201581           Komfovent C6.1 User and installer Controller QV-KV-H-SENSOR Quiet-Vent

GBP 3699.45
1

Komfovent Left Hand R250F Rotary wheel lay flat horizontal floor unit

Komfovent Left Hand R250F Rotary wheel lay flat horizontal floor unit

Description Komfovent R250 F Left Hand 1156589 Komfovent R250 F Right Hand 1156591 The Komfovent Domekt R-250-F heat recovery unit is a high-quality ceiling or floor mounted rotary wheel unit suitable for new houses up to 150m2 that has advanced Wi-Fi controllability and are suitable for very cold climates of down to -30° This unit has an (A) energy rating BPC Ventilation are the largest independent MVHR specialists and supply lifetime technical support on our top-quality systems, Key features- Komfovent R250 F Interactive Wi-Fi Smart control Passive house approved C6M Digital controller* Next Generation rotary heat exchanger Suitable for home sizes up to 150m2 Airflow rate @100Pa - 250m3/h Optional direct connection to kitchen cooker hood Super Quiet with insulated construction No drain or pre-heater required Highly efficient EC fans 100% summer bypass M5 filtration ‘A’ energy rating High heat recovery efficiency of up to 86%. On demand control via optional room or duct sensor options Fireplace and holiday settings CAV -VAV-DCV airflow control Plug and play easy installation Optional Humidity control Optional F7 filtration Controllability The Domekt units feature an integrated smart control system allowing you to control your system without constant adjustments via the Komfovent Home application on your home computer or mobile device, the unit also has an additional hard wired digital remote control if required App Control Wall controller (optional) 8 preset modes. Intelligent energy saving algorithms. Automatic air quality control with optional AQ sensor. Extensive weekly schedule. External Control Ability to control via a web browser for remote monitoring and repair Integration into a smart home management system. (BMS) parameters by connecting additional sensors. Optional wall controller 0-10v and 0v connections Optional boost switch Optional humidity sensor (duct mounted)   BMS Control Implemented BACnet and Modbus protocols enable simple connection into Building Management System as a result whole buildings engineering systems can be controlled at a single access point. Construction Domekt heat recovery units are double protected from corrosion. The units are constructed of galvanised steel with a powder coated finish (RAL9003) and EPP internal casing, The airtight doors are 50mm thick  with thermal locks Motors The fan motors are low energy EC fans of A+ rating and are protected from humidity and dust as well as being equipped with long-life bearings Filtration 2 x G5 filters are fitted to the unit that are easy to replace Optional F7 to air supply Summer By-Pass The Komfovent range of units have a 100% summer by-Pass If the indoor temperature Intake exceeds 25°C and the outdoor temperature is within comfort zones the summer by-pass is opened automatically to help provide a comfortable indoor temperature Low Noise Levels With airtight, aerodynamic and sound absorbing construction with perfectly balanced fans the noise levels are ultra quiet Heat Exchanger Frost Protection There is no condensation drain and Frost protection is not required unless below - 20° Orientation The units can be right or left-handed and correct orientation should be checked before purchase Construction Manufactured of powder coated galvanised steel outer cover for durability and an inside EPP lining for quietness and efficiency

GBP 2668.14
1

Komfovent Domekt R-700-V Heat Recovery Unit

Komfovent Domekt R-700-V Heat Recovery Unit

Komfovent Domekt R-700-V Heat Recovery Unit Product Part Number Komfovent Left Hand R700V Rotary wheel vertical unit - Domekt-R-700-V-L Komfovent Right Hand R700V Rotary wheel vertical unit - Domekt-R-700-V-R Description The Komfovent Domekt R-700-V heat recovery unit is a high-quality rotary wheel unit suitable for new houses up to 480m2. Technical Features Suitable for house sizes up 480m2 Maximum airflow rate - 850m3/h Airflow rate @ 100Pa - 764m3/h Optional direct connection to kitchen cooker hood Provides up to 83% heat recovery Sound level @3m - 34 dB(A) Weight - 114kg Dimensions W x H x D – 1070mm x 950mm x 645mm Duct diameter – 250mm Controllability The Domekt units feature an integrated smart control system allowing you to control your system without constant adjustments via the Komfovent Home application on your home computer or mobile device, the unit also has an additional hard wired digital remote control if required Construction Domekt heat recovery units are double protected from corrosion. The units are constructed of galvanised steel with a powder coated finish. The fan motors are protected from humidity and dust as well as being equipped with long-life bearings.

GBP 4168.82
1

Komfovent RHP-600 4.4/3.8-UV/UH

Komfovent RHP-600 4.4/3.8-UV/UH

Komfovent RHP 600-U Air Handling Unit Product Part Number Komfovent RHP-600V Rotary wheel vertical unit with heat pump - RHP-600 4.4/3.8-UV Komfovent RHP-600H Rotary wheel Horizontal unit with heat pump - RHP-600 4.4/3.8-UH Description Komfovent RHP range are air handling units with an integrated heat pump, this unit features all HVAC systems in one unit providing complete indoor microclimate control. Komfovent RHP 600-U air handling unit provides ventilation in premises up to 400m2. RHP units with heat pump drain. Technical Features Suitable for home sizes up to 375m2 Maximum airflow rate - 650m3/h Weight - 194kg Sound level @ 3m - 41dB(A) Dimensions W x H x D - 1254mm x 878mm x 650mm Duct diameter - 200mm Two Step Heating and Cooling Recovery To reach maximum efficiency these units are designs to recovery energy in two steps Step 1: Recovery by enthalpy rotary heat exchanger Step 2: Recovery by reversible heat pump Cooling Mode Due to cooling recovery by rotary heat exchanger, the air temperature after the rotor is lower than the outside air temperature. Condensation temperature in this case is lower, which results in reduced compressor electricity consumption compared with outdoor condensing unit Heating Mode  a highly efficient rotary heat exchanger is used for first-stage heat recovery, recovering the biggest part of the heat of extracted air. For second-stage heat recovery and supply air temperature control a heat pump is used Controllability Intelligent control with algorithms and reliable components to ensure safe and efficient operation. This unit can be controlled via a digital C5.1 controller Construction RHP units are constructed of galvanized steel sheets, which are powder coated. Mineral wool is used for thermal insulation and sound attenuation. Unit cover panels are 45 mm thick.

GBP 10832.18
1

Zehnder Caladair Pyrostar Smoke and Air Handling Unit

Zehnder Caladair Pyrostar Smoke and Air Handling Unit

Zehnder Caladair Pyrostar Smoke and Air Handling Unit Caladair Pyrostar is smoke and air handling unit that is suitable for external and internal applications. Pyrostar smoke extraction units met legal requirements for the extraction of smoke and hot gases in the event of a fire in high rise and public assembly buildings with a rating of 2hrs. The range is also designed for the intermediate or continuous extraction of contaminated air from industrial premises, professional kitchens and carparks. High quality bespoke units manufactured in Spain to order (please contact office for delivery date) Key features Smoke and air handling unit Suitable external and internal applications 2hr fire rating @400 degree CE certificate for smoke and heat extraction fans which comply with standard NF EN 12101-3 Extracts smoke and hot gases in the event of a fire Extracts contaminated air from industrial premises Belt pulley transmission with IE3 AC motor Flow rates from 600 to 50000 m3/h Pyrostar R is equipped with an epoxy paint backward wheel Pyrostar A is equipped with a forward wheel constructed of galvanised steel Condensate tray at bottom of unit (ECP option) for removal of condensates Variable drive pulley up to 5.5 kW Protective housing for the transmission on the fan compartment side, easily removable for belt replacement. Fitted with bird protection mesh on outlet Isolation switch installed on unit High quality Construction. Models Pyrostar range is available in 5 sizes and 20 models. The range covers flow rates from 600 to 50000 m3/hr either in impulse turbine version for pressures up to 1500 Pa, or reaction turbine versions for pressure up to 2600 Pa. The Pyrostar R version is fitted with a reaction turbine is especially suitable and recommended for applications in professional kitchens or for the extraction of foul contaminated air (car parks, industry, etc.). Available models: Pyrostar 4 / Pyrostar 6 / Pyrostar 10 / Pyrostar 12 / Pyrostar 15 / Pyrostar 20 / Pyrostar 25 / Pyrostar 30 / Pyrostar 40 / Pyrostar 50 Supply and extract connections are circular in models 4-12, models 15-50 are square connections. Pyrostar A models– impulse turbine and double opening, made from galvanised steel. It is balanced statically and dynamically

GBP 0.00
1

Nuaire MRXBOXAB-ECO4-1Z With Acoustic & Silent Box

Nuaire MRXBOXAB-ECO4-1Z With Acoustic & Silent Box

Description Nuaire MRXBOXAB-ECO4B-1Z Opposite Handed MRXBOXAB-ECO4B-1Z-OH The Nuaire MRXBOXAB-ECO4B-1Z consists of the ECO4 MVHR unit, attenuators and flexible duct connectors entirely encased in an all-in-one aesthetically pleasing acoustic enclosure This kit provides significant reduction in cased-radiated noise The Nuaire MRXBOXAB-ECO4B provides a maximum flow rate of 555m3/hr suitable for a house up to 330 m2 floor area with up to 10 kitchens & bathrooms Controllability is provided by an internal humidity sensors and optional room sensors or switches (no digital controller is available for this model) The Nuaire MRXBOX range has been in continual improvement and production in the UK for over 15 years providing a high performance, wall-mounted MVHR unit which is specifically designed to provide a reliable but simple to operate system for social housing, developments and end users BPC Ventilation are the largest independent MVHR specialists and supply this unit with up to a 5-year parts warranty* and lifetime technical support on our top-quality systems, KEY FEATURES – Nuaire AB-ECO4B Acoustic enclosure on unit and Attenuator top box Attenuators and flexible duct connectors Suitable for floor areas up to 330m2 Delivers an airflow rate of up to 555 m³/hour @ 100 Pa High heat recovery efficiency of up to 94%. Internal humidity sensor for automatic speed control 100% summer by-pass On demand control via optional room or duct sensor options Full 100% automatic summer bypass to supply unheated air in the summer Sap Appendix Q (BRE) approved 2 x G4 filters Galvanised steel casing with EPP internal lining 2-year warranty* (Listed parts Only) 'A' energy rating Left hand right oriented models available UK/CA marked Surge protected Integral Humidity Sensor The Nuaire unit has a internal humidity sensors that can provide a superior demand-controlled ventilation solution for your property When the unit senses that the humidity exceeds the set point the unit will boost to that set by the commissioned boost speed. The humidity can be set on the front of the unit We also advise an optional boost switch should be used local to the wet rooms Filtration 2 x G4 filters are fitted to the unit that are easy and inexpensive to replace (The filters are provided with plastic covers that should be removed before starting unit for first time) CONTROL OPTIONS The Nuaire MRXBOX units are controlled by one of the following: 4 x adjustable switches on the front of the unit Manual control Via optional 3 speed manual switch On-demand ventilation through built-in humidity sensors Additional external sensors achieving on-demand ventilation Switched live signal from light/remote switches Heat Exchanger This unit has a high-quality PVC counterflow heat exchanger with up to a 90% thermal efficiency protected with high-capacity filters on each side The heat exchanger is easy to remove for maintenance and any accumulated condensation is easily dispersed via a drain at the bottom of the unit Frost Protection In the event of the intake air temperature at the unit dropping below the predetermined set point (-5°C as standard) the supply fan will reduce to minimum speed, once the temperature rises above the set point the fan will return to its commissioned speed. Frost protection will only activate after ten days of continuous run time. Summer By-Pass The Nuaire AB units have a 100% summer by-Pass If the indoor temperature Intake exceeds 25°C and the outdoor temperature is within comfort zones the summer by-pass is opened automatically to help provide a comfortable indoor temperature Orientation The Nuaire units can be right or left-handed and correct orientation should be checked before purchase Construction Manufactured of powder coated galvanised steel outer cover for durability and an inside EPP lining for quietness and efficiency Mounting The Nuaire units are wall mounted as standard and are supplied with a wall bracket

GBP 5063.84
1

Nuaire MRXBOXAB-ECO5B Heat Recovery Unit

Nuaire MRXBOXAB-ECO5B Heat Recovery Unit

Nuaire MRXBOXAB-ECO5B Opposite Handed MRXBOXAB-ECO5B-OH Description The Nuaire MRXBOXAB-ECO5B provides a maximum flow rate of 495m3/hr suitable for a house up to 295 m2 floor area with up to 8 kitchens & bathrooms Controllability is provided by an internal humidity sensors and optional room sensors or switches (no digital controller is available for this model) The Nuaire MRXBOX range has been in continual improvement and production in the UK for over 15 years providing a high performance, wall-mounted MVHR unit which is specifically designed to provide a reliable but simple to operate system for social housing, developments and end users BPC Ventilation are the largest independent MVHR specialists and supply this unit with up to a 5-year parts warranty* and lifetime technical support on our top-quality systems, KEY FEATURES – Nuaire AB-ECO5B Suitable for floor areas up to 295m2 Delivers an airflow rate of up to 495 m³/hour @ 100 Pa High heat recovery efficiency of up to 90%. Internal humidity sensor for automatic speed control 100% summer by-pass On demand control via optional room or duct sensor options Full 100% automatic summer bypass to supply unheated air in the summer Sap Appendix Q (BRE) approved 2 x G4 filters Galvanised steel casing with EPP internal lining 2-year warranty* (Listed parts Only) 'A' energy rating Left hand right oriented models available UK/CA marked Surge protected Optional Acoustic enclosures Integral Humidity Sensor The Nuaire unit has a internal humidity sensors that can provide a superior demand-controlled ventilation solution for your property When the unit senses that the humidity exceeds the set point the unit will boost to that set by the commissioned boost speed. The humidity can be set on the front of the unit We also advise an optional boost switch should be used local to the wet rooms Filtration 2 x G4 filters are fitted to the unit that are easy and inexpensive to replace (The filters are provided with plastic covers that should be removed before starting unit for first time) CONTROL OPTIONS The Nuaire MRXBOX units are controlled by one of the following: 4 x adjustable switches on the front of the unit Manual control Via optional 3 speed manual switch On-demand ventilation through built-in humidity sensors Additional external sensors achieving on-demand ventilation Switched live signal from light/remote switches Heat Exchanger This unit has a high-quality PVC counterflow heat exchanger with up to a 90% thermal efficiency protected with high-capacity filters on each side The heat exchanger is easy to remove for maintenance and any accumulated condensation is easily dispersed via a drain at the bottom of the unit Frost Protection In the event of the intake air temperature at the unit dropping below the predetermined set point (-5°C as standard) the supply fan will reduce to minimum speed, once the temperature rises above the set point the fan will return to its commissioned speed. Frost protection will only activate after ten days of continuous run time. Summer By-Pass The Nuaire AB units have a 100% summer by-Pass If the indoor temperature Intake exceeds 25°C and the outdoor temperature is within comfort zones the summer by-pass is opened automatically to help provide a comfortable indoor temperature Orientation The Nuaire units can be right or left-handed and correct orientation should be checked before purchase Construction Manufactured of powder coated galvanised steel outer cover for durability and an inside EPP lining for quietness and efficiency Mounting The Nuaire units are wall mounted as standard and are supplied with a wall bracket An optional angled mounting bracket MRXBOX-AV4 are fitted to the bottom of the unit are available First Fix Solution MRXBOX-FF4 Nuair’s First Fix box is fixed to the underside of the floor slab at first fix stage of the build. The box has four airflow chambers with optional positions for 204x60mm spigots. Ceilings can then be boarded within the cupboard space easily

GBP 1782.32
1

Nuaire MRXBOXAB-ECO3B Heat Recovery System

Nuaire MRXBOXAB-ECO3B Heat Recovery System

Description Nuaire MRXBOXAB-ECO3B Opposite Handed MRXBOXAB-ECO3B-OH The Nuaire MRXBOXAB-ECO3B provides a maximum flow rate of 320m3/hr suitable for a house up to 190 m2 floor area with up to 6 kitchens & bathrooms Controllability is provided by an internal humidity sensors and optional room sensors or switches (no digital controller is available for this model) The Nuaire MRXBOX95 range has been in continual improvement and production in the UK for over 15 years providing a high performance, wall-mounted MVHR unit which is specifically designed to provide a reliable but simple to operate system for social housing, developments and end users BPC Ventilation are the largest independent MVHR specialists and supply this unit with up to a 5-year parts warranty* and lifetime technical support on our top-quality systems, KEY FEATURES – Nuaire AB-ECO3B Suitable for floor areas up to 190m2 Delivers an airflow rate of up to 320 m³/hour @ 100 Pa High heat recovery efficiency of up to 90%. Internal humidity sensor for automatic speed control 100% summer by-pass On demand control via optional room or duct sensor options Full 100% automatic summer bypass to supply unheated air in the summer Sap Appendix Q (BRE) approved 2 x G4 filters Galvanised steel casing with EPP internal lining 2-year warranty* (Listed parts Only) 'A' energy rating Left hand right oriented models available UK/CA marked Surge protected Optional Acoustic enclosures Integral Humidity Sensor The Nuaire unit has a internal humidity sensors that can provide a superior demand-controlled ventilation solution for your property When the unit senses that the humidity exceeds the set point the unit will boost to that set by the commissioned boost speed. The humidity can be set on the front of the unit We also advise an optional boost switch should be used local to the wet rooms Filtration 2 x G4 filters are fitted to the unit that are easy and inexpensive to replace (The filters are provided with plastic covers that should be removed before starting unit for first time)  CONTROL OPTIONS The Nuaire MRXBOX units are controlled by one of the following: 4 x adjustable switches on the front of the unit Manual control Via optional 3 speed manual switch On-demand ventilation through built-in humidity sensors Additional external sensors achieving on-demand ventilation Switched live signal from light/remote switches Heat Exchanger This unit has a high-quality PVC counterflow heat exchanger with up to a 90% thermal efficiency protected with high-capacity filters on each side The heat exchanger is easy to remove for maintenance and any accumulated condensation is easily dispersed via a drain at the bottom of the unit Frost Protection In the event of the intake air temperature at the unit dropping below the predetermined set point (-5°C as standard) the supply fan will reduce to minimum speed, once the temperature rises above the set point the fan will return to its commissioned speed. Frost protection will only activate after ten days of continuous run time. Summer By-Pass The Nuaire AB units have a 100% summer by-Pass If the indoor temperature Intake exceeds 25°C and the outdoor temperature is within comfort zones the summer by-pass is opened automatically to help provide a comfortable indoor temperature Orientation The Nuaire units can be right or left-handed and correct orientation should be checked before purchase Construction Manufactured of powder coated galvanised steel outer cover for durability and an inside EPP lining for quietness and efficiency Mounting The Nuaire units are wall mounted as standard and are supplied with a wall bracket An optional angled mounting bracket MRXBOX-AV3 are fitted to the bottom of the unit are available First Fix Solution MRXBOX-FF3 Nuair’s First Fix box is fixed to the underside of the floor slab at first fix stage of the build. The box has four airflow chambers with optional positions for 204x60mm spigots. Ceilings can then be boarded within the

GBP 1303.26
1

Nuaire MRXBOXAB-ECO3-1Z with Accoustic Enclosure & Silent Box

Nuaire MRXBOXAB-ECO3-1Z with Accoustic Enclosure & Silent Box

Description Nuaire MRXBOXAB-ECO3-1Z Opposite Handed MRXBOXAB-ECO3-1Z-OH The Nuaire MRXBOXAB-ECO3-1Z consists of the ECO3 MVHR unit, attenuators and flexible duct connectors entirely encased in an all-in-one aesthetically pleasing acoustic enclosure This kit provides significant reduction in cased-radiated noise The Nuaire MRXBOXAB-ECO3B provides a maximum flow rate of 320m3/hr suitable for a house up to 190 m2 floor area with up to 6 kitchens & bathrooms Controllability is provided by an internal humidity sensors and optional room sensors or switches (no digital controller is available for this model) The Nuaire MRXBOX95 range has been in continual improvement and production in the UK for over 15 years providing a high performance, wall-mounted MVHR unit which is specifically designed to provide a reliable but simple to operate system for social housing, developments and end users BPC Ventilation are the largest independent MVHR specialists and supply this unit with up to a 5-year parts warranty* and lifetime technical support on our top-quality systems, KEY FEATURES – Nuaire AB-ECO3 Acoustic enclosure on unit and Attenuator top box Attenuators and flexible duct connectors Suitable for floor areas up to 190m2 Delivers an airflow rate of up to 320 m³/hour @ 100 Pa High heat recovery efficiency of up to 90%. Internal humidity sensor for automatic speed control 100% summer by-pass On demand control via optional room or duct sensor options Full 100% automatic summer bypass to supply unheated air in the summer Sap Appendix Q (BRE) approved 2 x G4 filters Galvanised steel casing with EPP internal lining 2-year warranty* (Listed parts Only) 'A' energy rating Left hand right oriented models available UK/CA marked Surge protected Integral Humidity Sensor The Nuaire unit has a internal humidity sensors that can provide a superior demand-controlled ventilation solution for your property When the unit senses that the humidity exceeds the set point the unit will boost to that set by the commissioned boost speed. The humidity can be set on the front of the unit We also advise an optional boost switch should be used local to the wet rooms Filtration 2 x G4 filters are fitted to the unit that are easy and inexpensive to replace (The filters are provided with plastic covers that should be removed before starting unit for first time) CONTROL OPTIONS The Nuaire MRXBOX units are controlled by one of the following: 4 x adjustable switches on the front of the unit Manual control Via optional 3 speed manual switch On-demand ventilation through built-in humidity sensors Additional external sensors achieving on-demand ventilation Switched live signal from light/remote switches Filtration 2 x G4 filters are fitted to the unit that are easy and inexpensive to replace (The filters are provided with plastic covers that should be removed before starting unit for first time)  CONTROL OPTIONS The Nuaire MRXBOX units are controlled by one of the following: 4 x adjustable switches on the front of the unit Manual control Via optional 3 speed manual switch On-demand ventilation through built-in humidity sensors Additional external sensors achieving on-demand ventilation Switched live signal from light/remote switches Heat Exchanger This unit has a high-quality PVC counterflow heat exchanger with up to a 90% thermal efficiency protected with high-capacity filters on each side The heat exchanger is easy to remove for maintenance and any accumulated condensation is easily dispersed via a drain at the bottom of the unit Frost Protection In the event of the intake air temperature at the unit dropping below the predetermined set point (-5°C as standard) the supply fan will reduce to minimum speed, once the temperature rises above the set point the fan will return to its commissioned speed. Frost protection will only activate after ten days of continuous run time. Summer By-Pass The Nuaire AB units have a 100% summer by-Pass If the indoor temperature Intake exceeds 25°C and the outdoor temperature is within comfort zones the summer by-pass is opened automatically to help provide a comfortable indoor temperature

GBP 2960.52
1

Nuaire MRXBOXAB-ECO4 Heat Recovery System

Nuaire MRXBOXAB-ECO4 Heat Recovery System

Nuaire MRXBOXAB-ECO4B Opposite Handed MRXBOXAB-ECO4B-OH Description The Nuaire MRXBOXAB-ECO4B provides a maximum flow rate of 555m3/hr suitable for a house up to 330 m2 floor area with up to 10 kitchens & bathrooms Controllability is provided by an internal humidity sensors and optional room sensors or switches (no digital controller is available for this model) The Nuaire MRXBOX range has been in continual improvement and production in the UK for over 15 years providing a high performance, wall-mounted MVHR unit which is specifically designed to provide a reliable but simple to operate system for social housing, developments and end users BPC Ventilation are the largest independent MVHR specialists and supply this unit with up to a 5-year parts warranty* and lifetime technical support on our top-quality systems, KEY FEATURES – Nuaire AB-ECO4B Suitable for floor areas up to 330m2 Delivers an airflow rate of up to 555 m³/hour @ 100 Pa High heat recovery efficiency of up to 94%. Internal humidity sensor for automatic speed control 100% summer by-pass On demand control via optional room or duct sensor options Full 100% automatic summer bypass to supply unheated air in the summer Sap Appendix Q (BRE) approved 2 x G4 filters Galvanised steel casing with EPP internal lining 2-year warranty* (Listed parts Only) 'A' energy rating Left hand right oriented models available UK/CA marked Surge protected Optional Acoustic enclosures Integral Humidity Sensor The Nuaire unit has a internal humidity sensors that can provide a superior demand-controlled ventilation solution for your property When the unit senses that the humidity exceeds the set point the unit will boost to that set by the commissioned boost speed. The humidity can be set on the front of the unit We also advise an optional boost switch should be used local to the wet rooms Filtration 2 x G4 filters are fitted to the unit that are easy and inexpensive to replace (The filters are provided with plastic covers that should be removed before starting unit for first time) CONTROL OPTIONS The Nuaire MRXBOX units are controlled by one of the following: 4 x adjustable switches on the front of the unit Manual control Via optional 3 speed manual switch On-demand ventilation through built-in humidity sensors Additional external sensors achieving on-demand ventilation Switched live signal from light/remote switches Heat Exchanger This unit has a high-quality PVC counterflow heat exchanger with up to a 90% thermal efficiency protected with high-capacity filters on each side The heat exchanger is easy to remove for maintenance and any accumulated condensation is easily dispersed via a drain at the bottom of the unit Frost Protection In the event of the intake air temperature at the unit dropping below the predetermined set point (-5°C as standard) the supply fan will reduce to minimum speed, once the temperature rises above the set point the fan will return to its commissioned speed. Frost protection will only activate after ten days of continuous run time. Summer By-Pass The Nuaire AB units have a 100% summer by-Pass If the indoor temperature Intake exceeds 25°C and the outdoor temperature is within comfort zones the summer by-pass is opened automatically to help provide a comfortable indoor temperature Orientation The Nuaire units can be right or left-handed and correct orientation should be checked before purchase Construction Manufactured of powder coated galvanised steel outer cover for durability and an inside EPP lining for quietness and efficiency Mounting The Nuaire units are wall mounted as standard and are supplied with a wall bracket An optional angled mounting bracket MRXBOX-AV4 are fitted to the bottom of the unit are available First Fix Solution MRXBOX-FF4 Nuair’s First Fix box is fixed to the underside of the floor slab at first fix stage of the build. The box has four airflow chambers with optional positions for 204x60mm spigots. Ceilings can then be boarded within the cupboard space easily and quickly

GBP 2403.14
1

Komfovent RHP 400-V Air Handling Unit

Komfovent RHP 400-V Air Handling Unit

Komfovent RHP 400-V Air Handling Unit Product Part Number Komfovent RHP-400V Rotary wheel vertical unit with heat pump - RHP-400V Description Komfovent RHP range are air handling units with an integrated heat pump, this unit features all HVAC systems in one unit providing complete indoor microclimate control. Komfovent RHP 400-V air handling unit provides ventilation in premises up to 220m2. Technical Features Suitable for home sizes up to 220m2 Maximum airflow rate - 398m3/h Weight - 106kg Sound level @ 3m - 44dB(A) Dimensions W x H x D - 712mm x 892mm x 618mm Duct diameter 160mm Two Step Heating and Cooling Recovery To reach maximum efficiency these units are designs to recovery energy in two steps Step 1: Recovery by enthalpy rotary heat exchanger Step 2: Recovery by reversible heat pump Cooling Mode Due to cooling recovery by rotary heat exchanger, the air temperature after the rotor is lower than the outside air temperature. Condensation temperature in this case is lower, which results in reduced compressor electricity consumption compared with outdoor condensing unit Heating Mode  A highly efficient rotary heat exchanger is used for first-stage heat recovery, recovering the biggest part of the heat of extracted air. For second-stage heat recovery and supply air temperature control a heat pump is used Controllability Intelligent control with algorithms and reliable components to ensure safe and efficient operation. This unit can be controlled via a digital C5.1 controller Construction RHP units are constructed of galvanized steel sheets, which are powder coated. Mineral wool is used for thermal insulation and sound attenuation. Unit cover panels are 45 mm thick.

GBP 7251.69
1

Nuaire MRXBOXAB-ECO2 Heat Recovery System

Nuaire MRXBOXAB-ECO2 Heat Recovery System

Nuaire MRXBOXAB-ECO2B Opposite Handed MRXBOXAB-ECO2B-OH Description The Nuaire MRXBOXAB-ECO2B provides a maximum flow rate of 288m3/hr suitable for a house up to 172 m2 floor area with up to 5 kitchens & bathrooms Controllability is provided by an internal humidity sensors and optional room sensors or switches (no digital controller is available for this model) The Nuaire MRXBOX range has been in continual improvement and production in the UK for over 15 years providing a high performance, wall-mounted MVHR unit which is specifically designed to provide a reliable but simple to operate system for social housing, developments and end users BPC Ventilation are the largest independent MVHR specialists and supply this unit with up to a 5-year parts warranty* and lifetime technical support on our top-quality systems Integral Humidity Sensor The Nuaire unit has a internal humidity sensors that can provide a superior demand-controlled ventilation solution for your property When the unit senses that the humidity exceeds the set point the unit will boost to that set by the commissioned boost speed. The humidity can be set on the front of the unit We also advise an optional boost switch should be used local to the wet rooms Filtration 2 x G4 filters are fitted to the unit that are easy and inexpensive to replace (The filters are provided with plastic covers that should be removed before starting unit for first time)  CONTROL OPTIONS The Nuaire MRXBOX units are controlled by one of the following: 4 x adjustable switches on the front of the unit Manual control Via optional 3 speed manual switch On-demand ventilation through built-in humidity sensors Additional external sensors achieving on-demand ventilation Switched live signal from light/remote switches Heat Exchanger This unit has a high-quality PVC counterflow heat exchanger with up to a 90% thermal efficiency protected with high-capacity filters on each side The heat exchanger is easy to remove for maintenance and any accumulated condensation is easily dispersed via a drain at the bottom of the unit Frost Protection In the event of the intake air temperature at the unit dropping below the predetermined set point (-5°C as standard) the supply fan will reduce to minimum speed, once the temperature rises above the set point the fan will return to its commissioned speed. Frost protection will only activate after ten days of continuous run time.   Summer By-Pass The Nuaire AB units have a 100% summer by-Pass If the indoor temperature Intake exceeds 25°C and the outdoor temperature is within comfort zones the summer by-pass is opened automatically to help provide a comfortable indoor temperature Orientation The Nuaire units can be right or left-handed and correct orientation should be checked before purchase Construction Manufactured of powder coated galvanised steel outer cover for durability and an inside EPP lining for quietness and efficiency Mounting The Nuaire units are wall mounted as standard and are supplied with a wall bracket An optional angled mounting bracket MRXBOX-AV2 are fitted to the bottom of the unit are available First Fix Solution MRXBOX-FF2 Nuair’s First Fix box is fixed to the underside of the floor slab at first fix stage of the build. The box has four airflow chambers with optional positions for 204x60mm spigots. Ceilings can then be boarded within the cupboard space easily and quickly without the risk of the spigots not aligning to the fan unit. Acoustic Enclosure Optional acoustic solutions are available for high demanding properties requiring the quietest system possible MRXBOXAB-ECO2B-AE – Unit has an acoustic surrounding with internal anti vibration mounts to the MVHR unit and flexible duct connectors MRXBOXAB-ECO2B-1Z - The 1Z is the all-in-one acoustic enclosure, allowing in the MVHR unit and attenuator to be entirely cased in an

GBP 1123.50
1

Nuaire MRXBOXAB-ECO2-1Z with Accoustic Enclosure & Silent Box

Nuaire MRXBOXAB-ECO2-1Z with Accoustic Enclosure & Silent Box

Nuaire MRXBOXAB-ECO2B-1Z Opposite Handed MRXBOXAB-ECO2B-1Z-OH   Description The Nuaire MRXBOXAB-ECO2B-1Z consists of the ECO2 MVHR unit, attenuators and flexible duct connectors entirely encased in an all-in-one aesthetically pleasing acoustic enclosure This kit provides significant reduction in cased-radiated noise The ECO2B-1Z provides a maximum flow rate of 288m3/hr suitable for a house up to 172 m2 floor area with up to 5 kitchens & bathrooms Controllability is provided by an internal humidity sensors and optional room sensors or switches (no digital controller is available for this model) The Nuaire MRXBOX range has been in continual improvement and production in the UK for over 15 years providing a high performance, wall-mounted MVHR unit which is specifically designed to provide a reliable but simple to operate system for social housing, developments and end users BPC Ventilation are the largest independent MVHR specialists and supply this unit with up to a 5-year parts warranty* and lifetime technical support on our top-quality systems Acoustic Enclosure MRXBOXAB-ECO2B-1Z - The 1Z is the all-in-one acoustic enclosure, allowing in the MVHR unit and attenuator to be entirely cased in an aesthetically pleasing model which encloses the attenuators and flexible duct connections that would otherwise be visible, all whilst making significant reduction in cased-radiated noise. Integral Humidity Sensor The Nuaire unit has a internal humidity sensors that can provide a superior demand-controlled ventilation solution for your property When the unit senses that the humidity exceeds the set point the unit will boost to that set by the commissioned boost speed. The humidity can be set on the front of the unit We also advise an optional boost switch should be used local to the wet rooms Filtration 2 x G4 filters are fitted to the unit that are easy and inexpensive to replace (The filters are provided with plastic covers that should be removed before starting unit for first time) CONTROL OPTIONS The Nuaire MRXBOX units are controlled by one of the following: 4 x adjustable switches on the front of the unit Manual control Via optional 3 speed manual switch On-demand ventilation through built-in humidity sensors Additional external sensors achieving on-demand ventilation Switched live signal from light/remote switches Filtration 2 x G4 filters are fitted to the unit that are easy and inexpensive to replace (The filters are provided with plastic covers that should be removed before starting unit for first time)  CONTROL OPTIONS The Nuaire MRXBOX units are controlled by one of the following: 4 x adjustable switches on the front of the unit Manual control Via optional 3 speed manual switch On-demand ventilation through built-in humidity sensors Additional external sensors achieving on-demand ventilation Switched live signal from light/remote switches Heat Exchanger This unit has a high-quality PVC counterflow heat exchanger with up to a 90% thermal efficiency protected with high-capacity filters on each side The heat exchanger is easy to remove for maintenance and any accumulated condensation is easily dispersed via a drain at the bottom of the unit Frost Protection In the event of the intake air temperature at the unit dropping below the predetermined set point (-5°C as standard) the supply fan will reduce to minimum speed, once the temperature rises above the set point the fan will return to its commissioned speed. Frost protection will only activate after ten days of continuous run time. Summer By-Pass The Nuaire AB units have a 100% summer by-Pass If the indoor temperature Intake exceeds 25°C and the outdoor temperature is within comfort zones the summer by-pass is opened automatically to help provide a comfortable indoor temperature Orientation The Nuaire units can be right or left-handed and correct orientation should be checked before purchase Construction Manufactured of powder coated galvanised steel outer cover for

GBP 2653.26
1

Nuaire MRXBOXAB Hybrid Cooling Kit

Nuaire MRXBOXAB Hybrid Cooling Kit

Nuaire MRXBOXAB-HYBRID COOLING KIT   Description Nuaire’s MRXBOX Hybrid Cooling System combines year-round high levels of indoor air quality with the added benefit of summer cooling to mitigate overheating. This added cooling significantly lowers the temperature of fresh air supplied into the dwelling, helping maintain comfortable internal temperature levels even in city centre apartments on the hottest days of summer. The MRXBOX Hybrid Cooling System consists of the MRXBOXAB-ECO5B-AE acoustic unit and the MR-ECO-COOL-V Cooling module and ECO5-AE-1Z-STND Floor stand The Nuaire MRXBOXAB-ECO5B provides a maximum flow rate of 450m3/hr and is recommend running at a min flow rate of 1 ACH when cooling is required Controllability to the comfort cooler is via a room thermostatic control and the MVHR unit is provided by an internal humidity sensors and optional room sensors or switches (no digital controller is available for this model) BPC Ventilation are the largest independent MVHR specialists and supply this unit with up to a 5-year parts warranty* and lifetime technical support on our top-quality systems Integral Humidity Sensor The Nuaire unit has a internal humidity sensors that can provide a superior demand-controlled ventilation solution for your property When the unit senses that the humidity exceeds the set point the unit will boost to that set by the commissioned boost speed. The humidity can be set on the front of the unit We also advise an optional boost switch should be used local to the wet rooms Filtration 2 x G3 filters are fitted to the unit that are easy and inexpensive to replace (The filters are provided with plastic covers that should be removed before starting unit for first time)   CONTROL OPTIONS The Cooling unit is controlled via a wall-mounted thermostatic control (CM-THERM-CONTROL) that senses indoor temperature and activates the cooling module when necessary. The thermostat is pre-set at 23°C but can be adjusted. If the property reaches this temperature, the cooling module will automatically activate to lower the temperature of the fresh air entering your home. The MVHR will also raise to a higher speed to increase fresh air supply and stale air extraction at the same time. Once the temperature in your home drops below this temperature, the cooling module will automatically turn off and the MVHR will return to its original speed. The Nuaire MRXBOX MVHR units are controlled by one of the following: 4 x adjustable switches on the front of the unit Manual control Via optional 3 speed manual switch On-demand ventilation through built-in humidity sensors Additional external sensors achieving on-demand ventilation Switched live signal from light/remote switches Heat Exchanger This unit has a high-quality PVC counterflow heat exchanger with up to a 90% thermal efficiency protected with high-capacity filters on each side The heat exchanger is easy to remove for maintenance and any accumulated condensation is easily dispersed via a drain at the bottom of the unit Frost Protection In the event of the intake air temperature at the unit dropping below the predetermined set point (-5°C as standard) the supply fan will reduce to minimum speed, once the temperature rises above the set point the fan will return to its commissioned speed. Frost protection will only activate after ten days of continuous run time. Summer By-Pass The Nuaire AB units have a 100% summer by-Pass If the indoor temperature Intake exceeds 25°C and the outdoor temperature is within comfort zones the summer by-pass is opened automatically to help provide a comfortable indoor temperature Orientation The Nuaire units can be right or left-handed and correct orientation should be checked before purchase Construction Manufactured of powder coated galvanised steel outer cover for durability and an inside EPP lining for quietness and efficiency Ducting All MVHR units using a comfort cooler require all ductwork insulated and capable of achieving a minimum of 1 ACH (air changes per hour) to all areas  

GBP 7567.66
1

Komfovent Domekt R-700-H Heat Recovery Unit

Komfovent Domekt R-700-H Heat Recovery Unit

Komfovent Domekt R-700-H Heat Recovery Unit Product Part Number Komfovent R700 H Left Hand - 1131533 Komfovent R700 H Right Hand - 1131532 Description The Komfovent Domekt R-700-H heat recovery unit is a high-quality Horizontal floor mounted rotary wheel unit suitable for new houses up to 440m2 that has advanced Wi-Fi controllability and are suitable for very cold climates of down to -30° This unit has an (A+) energy rating BPC Ventilation are the largest independent MVHR specialists and supply lifetime technical support on our top-quality systems, Key features- Komfovent R700 H Interactive Wi-Fi Smart control Passive house approved C6M Digital controller* Next Generation rotary heat exchanger Suitable for home sizes up to 440m2 Airflow rate @100Pa – 742 m3/h Optional direct connection to kitchen cooker hood Super Quiet with insulated construction No drain or pre-heater required Highly efficient EC fans 100% summer bypass M5 filtration ‘A+’ energy rating High heat recovery efficiency of up to 84%. On demand control via optional room or duct sensor options Fireplace and holiday settings CAV -VAV-DCV airflow control Plug and play easy installation Optional Humidity control Optional F7 filtration  Controllability The Domekt units feature an integrated smart control system allowing you to control your system without constant adjustments via the Komfovent Home application on your home computer or mobile device, the unit also has an additional hard wired digital remote control if required App Control Wall controller (optional) 8 preset modes. Intelligent energy saving algorithms. Automatic air quality control with optional AQ sensor. Extensive weekly schedule. External Control Ability to control via a web browser for remote monitoring and repair Integration into a smart home management system. (BMS) parameters by connecting additional sensors. Optional wall controller 0-10v and 0v connections Optional boost switch Optional humidity sensor (duct mounted) BMS Control Implemented BACnet and Modbus protocols enable simple connection into Building Management System as a result whole buildings engineering systems can be controlled at a single access point. Construction Domekt heat recovery units are double protected from corrosion. The units are constructed of galvanised steel with a powder coated finish (RAL9003) and EPP internal casing, The airtight doors are 50mm thick with thermal locks Motors The fan motors are low energy EC fans of A+ rating and are protected from humidity and dust as well as being equipped with long-life bearings Filtration 2 x G5 filters are fitted to the unit that are easy to replace Optional F7 to air supply Summer By-Pass The Komfovent range of units have a 100% summer by-Pass If the indoor temperature Intake exceeds 25°C and the outdoor temperature is within comfort zones the summer by-pass is opened automatically to help provide a comfortable indoor temperature Low Noise Levels With airtight, aerodynamic and sound absorbing construction with perfectly balanced fans the noise levels are ultra quiet Heat Exchanger Frost Protection There is no condensation drain and Frost protection is not required unless below - 20° Orientation The units can be right or left-handed and correct orientation should be checked before purchase

GBP 4817.20
1

Komfovent Domekt R-700-F Heat Recovery Unit

Komfovent Domekt R-700-F Heat Recovery Unit

Komfovent Domekt R-700-F Heat Recovery Unit Product Part Number Komfovent R700 F Left Hand 1086069 Komfovent R700 F Right Hand 1086070 Description The Komfovent Domekt R-700-F heat recovery unit is a high-quality floor or ceiling mounted rotary wheel unit suitable for new houses up to 455m2 that has advanced Wi-Fi controllability and are suitable for very cold climates of down to -30° This unit has an (A+) energy rating BPC Ventilation are the largest independent MVHR specialists and supply lifetime technical support on our top-quality systems Key features- Komfovent R700 F Interactive Wi-Fi Smart control Passive house approved C6M Digital controller* Next Generation rotary heat exchanger Suitable for home sizes up to 455m2 Airflow rate @100Pa – 764 m3/h Optional direct connection to kitchen cooker hood Super Quiet with insulated construction No drain or pre-heater required Highly efficient EC fans 100% summer bypass M5 filtration ‘A+’ energy rating High heat recovery efficiency of up to 83%. On demand control via optional room or duct sensor options Fireplace and holiday settings CAV -VAV-DCV airflow control Plug and play easy installation Optional Humidity control Optional F7 filtration Controllability The Domekt units feature an integrated smart control system allowing you to control your system without constant adjustments via the Komfovent Home application on your home computer or mobile device, the unit also has an additional hard wired digital remote control if required App Control Wall controller (optional) 8 preset modes. Intelligent energy saving algorithms. Automatic air quality control with optional AQ sensor. Extensive weekly schedule. External Control Ability to control via a web browser for remote monitoring and repair Integration into a smart home management system. (BMS) parameters by connecting additional sensors. Optional wall controller 0-10v and 0v connections Optional boost switch Optional humidity sensor (duct mounted) BMS Control Implemented BACnet and Modbus protocols enable simple connection into Building Management System as a result whole buildings engineering systems can be controlled at a single access point. Construction Domekt heat recovery units are double protected from corrosion. The units are constructed of galvanised steel with a powder coated finish (RAL9003) and EPP internal casing, The airtight doors are 50mm thick with thermal locks Motors The fan motors are low energy EC fans of A+ rating and are protected from humidity and dust as well as being equipped with long-life bearings  Filtration 2 x G5 filters are fitted to the unit that are easy to replace Optional F7 to air supply Summer By-Pass The Komfovent range of units have a 100% summer by-Pass If the indoor temperature Intake exceeds 25°C and the outdoor temperature is within comfort zones the summer by-pass is opened automatically to help provide a comfortable indoor temperature Low Noise Levels With airtight, aerodynamic and sound absorbing construction with perfectly balanced fans the noise levels are ultra quiet  Heat Exchanger Frost Protection There is no condensation drain and Frost protection is not required unless below - 20° Orientation The units can be right or left-handed and correct orientation should be checked before purchase

GBP 5497.33
1

Komfovent Domekt R-450-V Heat Recovery Unit

Komfovent Domekt R-450-V Heat Recovery Unit

Description Komfovent R450 Left Hand 1035807 Komfovent R450 Right Hand 1035808 The Komfovent Domekt R-450-V heat recovery unit is a high-quality vertical rotary wheel unit suitable for new houses up to 295m2 that has advanced Wi-Fi controllability and are suitable for very cold climates of down to -30° This unit has a A+ rating and is Passive House Approved BPC Ventilation are the largest independent MVHR specialists and supply lifetime technical support on our top-quality systems, Key features- Komfovent R450 V Interactive Wi-Fi Smart control Passive house approved C6M Digital controller* Next Generation rotary heat exchanger Suitable for home sizes up to 295m2 Airflow rate @100Pa - 496m3/h Optional direct connection to kitchen cooker hood Super Quiet with insulated construction No drain or pre-heater required Highly efficient EC fans 100% summer bypass M5 filtration ‘A+’ energy rating High heat recovery efficiency of up to 86%. On demand control via optional room or duct sensor options Fireplace and holiday settings CAV -VAV-DCV airflow control Plug and play easy installation Optional Humidity control Optional F7 filtration Controllability The Domekt units feature an integrated smart control system allowing you to control your system without constant adjustments via the Komfovent Home application on your home computer or mobile device, the unit also has an additional hard wired digital remote control if required App Control Wall controller (optional) 8 preset modes. Intelligent energy saving algorithms. Automatic air quality control with optional AQ sensor. Extensive weekly schedule. External Control Ability to control via a web browser for remote monitoring and repair Integration into a smart home management system. (BMS) parameters by connecting additional sensors. Optional wall controller 0-10v and 0v connections Optional boost switch Optional humidity sensor (duct mounted) BMS Control Implemented BACnet and Modbus protocols enable simple connection into Building Management System as a result whole buildings engineering systems can be controlled at a single access point. Construction Domekt heat recovery units are double protected from corrosion. The units are constructed of galvanised steel with a powder coated finish (RAL9003) and EPP internal casing, The airtight doors are 50mm thick  with thermal locks Motors The fan motors are low energy EC fans of A+ rating and are protected from humidity and dust as well as being equipped with long-life bearings Filtration 2 x G5 filters are fitted to the unit that are easy to replace Optional F7 to air supply Summer By-Pass The Komfovent range of units have a 100% summer by-Pass If the indoor temperature Intake exceeds 25°C and the outdoor temperature is within comfort zones the summer by-pass is opened automatically to help provide a comfortable indoor temperature Low Noise Levels With airtight, aerodynamic and sound absorbing construction with perfectly balanced fans the noise levels are ultra quiet Heat Exchanger Frost Protection There is no condensation drain and Frost protection is not required unless below - 20° Orientation The units can be right or left-handed and correct orientation should be checked before purchase Construction Manufactured of powder coated galvanised steel outer cover for durability and an inside EPP lining for quietness and efficiency Mounting The units are wall mounted as standard and are supplied with a wall bracket Accessories 774164415           x1 Komfovent M5 Filter - Domekt R 450 V C6 (470×240×46mm) 712201292           Komfovent SIPHON for Condensate Drain DN32 745201581        

GBP 2837.46
1

Komfovent Domekt R-400-F Heat Recovery Unit

Komfovent Domekt R-400-F Heat Recovery Unit

Description Komfovent R400 F Left Hand 1064289 Komfovent R400 F Right Hand 1064288 The Komfovent Domekt R-400 F heat recovery unit is a high-quality floor / ceiling mounted rotary wheel unit suitable for new houses up to 250m2 that has advanced Wi-Fi controllability and are suitable for very cold climates of down to -30° This unit has an (A+) energy rating BPC Ventilation are the largest independent MVHR specialists and supply lifetime technical support on our top-quality systems, Key features- Komfovent R400 F Interactive Wi-Fi Smart control Passive house approved C6M Digital controller* Next Generation rotary heat exchanger Suitable for home sizes up to 250m2 Airflow rate @100Pa - 421m3/h Optional direct connection to kitchen cooker hood Super Quiet with insulated construction No drain or pre-heater required Highly efficient EC fans 100% summer bypass M5 filtration ‘A+’ energy rating High heat recovery efficiency of up to 83%. On demand control via optional room or duct sensor options Fireplace and holiday settings CAV -VAV-DCV airflow control Plug and play easy installation Optional Humidity control Optional F7 filtration Controllability The Domekt units feature an integrated smart control system allowing you to control your system without constant adjustments via the Komfovent Home application on your home computer or mobile device, the unit also has an additional hard wired digital remote control if required App Control Wall controller (optional) 8 preset modes. Intelligent energy saving algorithms. Automatic air quality control with optional AQ sensor. Extensive weekly schedule. External Control Ability to control via a web browser for remote monitoring and repair Integration into a smart home management system. (BMS) parameters by connecting additional sensors. Optional wall controller 0-10v and 0v connections Optional boost switch Optional humidity sensor (duct mounted) BMS Control Implemented BACnet and Modbus protocols enable simple connection into Building Management System as a result whole buildings engineering systems can be controlled at a single access point. Construction Domekt heat recovery units are double protected from corrosion. The units are constructed of galvanised steel with a powder coated finish (RAL9003) and EPP internal casing, The airtight doors are 50mm thick with thermal locks Motors The fan motors are low energy EC fans of A+ rating and are protected from humidity and dust as well as being equipped with long-life bearings Filtration 2 x G5 filters are fitted to the unit that are easy to replace Optional F7 to air supply Summer By-Pass The Komfovent range of units have a 100% summer by-Pass If the indoor temperature Intake exceeds 25°C and the outdoor temperature is within comfort zones the summer by-pass is opened automatically to help provide a comfortable indoor temperature Low Noise Levels With airtight, aerodynamic and sound absorbing construction with perfectly balanced fans the noise levels are ultra quiet Heat Exchanger Frost Protection There is no condensation drain and Frost protection is not required unless below - 20° Orientation The units can be right or left-handed and correct orientation should be checked before purchase Construction Manufactured of powder coated galvanised steel outer cover for durability and an inside EPP lining for quietness and efficiency Mounting The units are wall mounted as standard and are supplied with a wall bracket Accessories 712201292           Komfovent SIPHON for Condensate Drain DN32 745201581           Komfovent C6.1 User and installer Controller QV-KV-H-SENSOR Quiet-Vent Humidity sensor for Komfovent units QV-BoostSw           1Gang Momentary Boost Switch

GBP 3221.93
1

Komfovent Domekt R-300-V Left Handed Heat Recovery Unit

Komfovent Domekt R-300-V Left Handed Heat Recovery Unit

Description Komfovent R300 V Left Hand 1086594 Komfovent R300 V Right Hand 1086592 The Komfovent Domekt R-300-V heat recovery unit is a high-quality floor mounted rotary wheel unit suitable for new houses up to 185m2 that has advanced Wi-Fi controllability and are suitable for very cold climates of down to -30° This unit has an (A+) energy rating BPC Ventilation are the largest independent MVHR specialists and supply lifetime technical support on our top-quality systems, Key features- Komfovent R300 V Interactive Wi-Fi Smart control Passive house approved C6M Digital controller* Next Generation rotary heat exchanger Suitable for home sizes up to 185m2 Airflow rate @100Pa - 310m3/h Optional direct connection to kitchen cooker hood Super Quiet with insulated construction No drain or pre-heater required Highly efficient EC fans 100% summer bypass M5 filtration ‘A’ energy rating High heat recovery efficiency of up to 86%. On demand control via optional room or duct sensor options Fireplace and holiday settings CAV -VAV-DCV airflow control Plug and play easy installation Optional Humidity control Optional F7 filtration Controllability The Domekt units feature an integrated smart control system allowing you to control your system without constant adjustments via the Komfovent Home application on your home computer or mobile device, the unit also has an additional hard wired digital remote control if required App Control Wall controller (optional) 8 preset modes. Intelligent energy saving algorithms. Automatic air quality control with optional AQ sensor. Extensive weekly schedule. External Control Ability to control via a web browser for remote monitoring and repair Integration into a smart home management system. (BMS) parameters by connecting additional sensors. Optional wall controller 0-10v and 0v connections Optional boost switch Optional humidity sensor (duct mounted) BMS Control Implemented BACnet and Modbus protocols enable simple connection into Building Management System as a result whole buildings engineering systems can be controlled at a single access point. Construction Domekt heat recovery units are double protected from corrosion. The units are constructed of galvanised steel with a powder coated finish (RAL9003) and EPP internal casing, The airtight doors are 50mm thick  with thermal locks Motors The fan motors are low energy EC fans of A+ rating and are protected from humidity and dust as well as being equipped with long-life bearings Filtration 2 x G5 filters are fitted to the unit that are easy to replace Optional F7 to air supply Summer By-Pass The Komfovent range of units have a 100% summer by-Pass If the indoor temperature Intake exceeds 25°C and the outdoor temperature is within comfort zones the summer by-pass is opened automatically to help provide a comfortable indoor temperature Low Noise Levels With airtight, aerodynamic and sound absorbing construction with perfectly balanced fans the noise levels are ultra quiet Heat Exchanger Frost Protection There is no condensation drain and Frost protection is not required unless below - 20° Orientation The units can be right or left-handed and correct orientation should be checked before purchase Construction Manufactured of powder coated galvanised steel outer cover for durability and an inside EPP lining for quietness and efficiency Mounting The units are wall mounted as standard and are supplied with a wall bracket Accessories 712201292           Komfovent SIPHON for Condensate Drain DN32 745201581           Komfovent C6.1 User and installer Controller

GBP 2367.11
1