6x Watco Safety Grip Cold Cure Light Grey 5m2 Sgcclgy
Images for illustration purposes only
Watco Safety Grip Cold Cure is a heavy duty, coarse textured, anti slip, two pack epoxy resin coatings designed to provide a safe surface both inside and out. Using one high build coat of Safety Grip minimises the risk of accidents throughout the workplace, particularly for wet or oily areas. All grades now carry CE Mark EN 1504-2 and have test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion and hardness. They are also chemical resistant and have an A+ VOC emissions rating with a low level of VOC.
Watco Safety Grip Cold Cure can be applied as low as 0C, providing exceptional slip resistance in unheated areas or outside in the winter months.
Recommended areas of use
Slippery, hazardous, wet or oily areas
Around machinery
Steps, ramps/disabled ramps, foot bridges
Loading bays, walkways and entrance ways
Car parks
Around vibrating machinery (see Safety Grip Flex)
Temperature Recoat Time Touch Dry Light Traffic Heavy Traffic
Safety Grip 10C
20C
30C 16 hours
12 hours
8 hours 12 hours
6 hours
4 hours 24 hours
16 hours
12 hours 36 hours
24 hours
24 hours
Safety Grip Rapid 10C
20C
30C 12 hours
8 hours
6 hours 8 hours
4 hours
3 hours 16 hours
8 hours
8 hours 36 hours
24 hours
24 hours
Safety Grip Cold Cure 0C
10C
20C 20 hours
12 hours
10 hours 12 hours
8 hours
6 hours 24 hours
16 hours
16 hours 48 hours
36 hours
24 hours
Safety Grip Flex 10C
20C
30C 12 hours
8 hours
6 hours 10 hours
6 hours
3 hours 16 hours
12 hours
12 hours 24 hours
24 hours
24 hours
Full Chemical Resistance: 7 days
Light Traffic: foot, trolley, pallet truck, occasional forklift
Heavy Traffic: regular forklift, heavy footfall, parked vehicles
