37 results (0,15305 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Vent-Axia Lo-Carbon Heat Save

Vent-Axia Lo-Carbon Heat Save

Vent-Axia Lo-Carbon Heat Save Product Part Number Vent-Axia Lo-Carbon Heat Save - 496036 Vent-Axia Wired Zone Control Panel - 496037 Description Through-The-Wall Heat recovery Unit The Vent-Axia Lo-Carbon Heat Save is a ventilation unit designed for living rooms and bedrooms in single and multi-family buildings. The unit is usually located in an exterior wall to provide new air to the room. The Vent-Axia Lo-Carbon Heat Save uses a reversible fan to extract dirty air from the room and replace it with outside air 70 seconds later. This air passes through a filter to ensure that clean air enters the room. These systems work best in pairs as when one unit is extracting, the other can be supplying air to provide a balanced ventilation system. They are controlled by a SENWZP Sentinel wired zone controller which can operate up to 8 units in synchronization. This provides a single room or whole house balanced ventilation system with heat recovery. As well as filtering the air, the Vent-Axia Lo-Carbon Heat Save uses a thermal accumulator to extract warmth from the outgoing air and uses it to temper the incoming air to avoid the feeling of cold drafts and recover heat that would otherwise be lost to the outside. Typical Installation The Vent-Axia Lo-Carbon Heat Save can be fitted in a 180mm diameter hole. Maximum wall thickness is 460mm or 745mm with optional wall tube (see accessories). The wall sleeve length (included up to 460mm) can be cut down to size to fit any wall thickness. Vent-Axia Lo-Carbon Heat Save units work best in pairs. When one unit is extracting, the other can be supplying air to provide a balanced ventilation system. They alternate direction every 70 seconds when the thermal accumulator on the extract unit has warmed up allowing the supply air to benefit from these thermal gains. They are controlled by a SENWZP Sentinel wired zone controller. This is fully modular and controllable with customized ventilation profiles available so that every room in the home can have the perfect ventilation.

GBP 413.62
1

Vent Axia Lo-Carbon Solo Plus P

Vent Axia Lo-Carbon Solo Plus P

Vent Axia LO-CARBON SOLO PLUS P   Product Part Number Vent Axia Solo Plus P - 427477 Description Long Life Ventilation The Lo-Carbon Solo Plus range from Vent-Axia has been specially designed for through the wall and ducted applications, suitable for internal bathrooms, toilets and other small rooms. Finished in white, the Lo-Carbon Solo Plus can be flush or surface mounted, with a 2 position 100mm circular spigot for rear entry or connecting to a vertical ducting system. The powerful centrifugal impeller allows installations using 100mm ducting in straight runs, whilst still achieving 15l/s as required by Building Regulations Approved Document F. Continuous running products, such as the Lo-Carbon Solo Plus, installed in all wet areas of a dwelling are classed as a wholehouse ventilation system and therefore only need to move the amount of air as outlined in table 5.1a and 5.1b of Building Regulations Approved Document F. The Lo-Carbon Solo Plus has an adjustable boost speed which is set at installation variable between a wall or duct setting for boost/override operation to meet Building Regulations thus ensuring minimum energy usage and low sound levels. All models have an optional speed for constant trickle ventilation (12l/s), selectable at installation. Depending on the model, the fan will switch from trickle (if selected) to boost via the pullcord/light switch/humidity sensor/PIR. All models can be wall, panel or ceiling mounted and can be connected to either circular, rectangular or Vent-Axia’s flat ducting. Enclosure of the electrical components is manufactured from flame retardant grade material.  

GBP 93.55
3

Vent Axia Lo-Carbon Quadra TP Kitchen/Bathroom fan

Vent Axia Lo-Carbon Quadra TP Kitchen/Bathroom fan

The Vent Axia Lo-Carbon Quadra Ventilation for any room Product Part Number Vent-Axia Lo-Carbon Quadra TP (Timer/Pullcord) - 439251 Description The Lo-Carbon Quadra TP offers a single fan suitable for surface or flush mounting. Low speed selectable between 6, 9 and 12l/s and high between 15, 30 and 60l/s all with through the wall or two ducted selections to ensure installed performance is met. It is also one of the most unobtrusive centrifugal kitchen fans available. The front cover design also provides no area for dirt to build up so it stays looking better for longer. Lo-Carbon Quadra SELV  Designed to meet building requirements where there is a need to fit in Zone 1 containing a fixed bath or shower according to IEE wiring regulations. The Lo-Carbon Quadra SELV can be safely installed within the spray area with the 24VDC Safety Isolating Power Supply situated away from the spray zone and out of reach of the person using the facility. With discrete aesthetics and low noise levels due to an accurately balanced impeller. Key Features Meets current Building Regulations Approved Document F & L for intermittent or continuous use Recognised in SAP PCDB - Low SFP on PCDB 0.38 W/l/s 100mm circular spigot for easy installation and replacement of any existing fan - flush or surface mount Filterless technology and maintenance free Lo-Carbon motors offering 90% energy savings and long life Motor cassette cartridge for simple replacement Integral day-logger (option on SELV models) 5 Year Motor Guarantee IPX4 rated - IPX7 rated (SELV) Suitable for wall, ceiling and panel mounting Dimensions mm  230 x 260 x 112

GBP 218.40
3

Vent Axia Integra Plus EC

Vent Axia Integra Plus EC

Vent Axia Integra Plus EC Product Part Number venta Axia Integra Plus EC - 437666EC Description The Integra Plus heat recovery unit has been specially designed to provide ventilation for flats or internal rooms in large residential, commercial, educational or leisure applications. Balanced ventilation is achieved by using nominal 150mm ducting. The unit includes two integral centrifugal speed controllable EC fans plus a high efficiency polymeric heat exchanger. The Vent-Axia Integra Plus EC boasts a temperature efficiency of up to 70%. The compact cube interleaves outgoing moist air with incoming fresh air, allowing the heat from one to warm the other without the two air streams mixing. Energy is saved on room heating, with no power being used by the cube itself. Main Features Supply and extract air ventilation with heat recovery Installation in ceiling voids and cupboards Boost operation with wall switch 3 x adjustable speeds Filtration Independent filtration is required Controllability The Integra Plus has three adjustable speed options: Normal, Boost and Purge. Construction The enclosure is constructed of PVC Motors The unit has 2 x low energy, high efficiency E/C motors Installation The Vent-Axia Integra is designed for mounting in ceiling voids, lofts or above a suspended ceiling. Four 150mm spigots are provided for simple connection to insulated flexible or rigid ventilation ducting. The unit comes complete with a 22mm condensate outlet situated on the base of the unit, this should be connected to a suitable outlet for condensate drainage. Accessories In addition to a choice of compatible ducting systems a full range of controls, sensors, in-line silencers, floor/wall/ceiling inlet and outlet diffusers are available to complete the installation.  

GBP 1415.04
1

Vent Axia Centra

Vent Axia Centra

Lo-Carbon Centra Lo-Carbon Centra has a specific fan power of only0.18 W/l/s in through-the-wall kitchen applications. Product Part Number 441782B Description The Lo-Carbon Centra meets the latest requirementsof the Building Regulations Approved Document Ffor wholehouse system ventilation.Selection of the two normal flow rates (6l/s or9l/s) is via a simple ‘jumper’ on the control board.Different methods are available for operatingboost speed from a simple switched live to integralhumidistat. See individual models for further details.The attractive and discreet styling of the Vent-AxiaLo-Carbon Centra will complement the décorof any new home while virtually silent operationensures optimum ventilation is achieved withoutintrusive noise. Key Features • Building Regulations ApprovedDocuments F and L compliant, System 3Continuous mechanical extract• Recognised in SAP Appendix Q- Low SFP on SAP Q• Quietest dMEV available• Discreet, tasteful styling• Single fan for use in all applications• IPX4 rated - IPX7 rated (SELV)• Pressure detection device• Normal and Boost speeds• Lo-Carbon motor offering 90% energysavings and long life• 5 Year Motor Guarantee• Suitable for wall, ceiling, panel andwindow mounting• SELV Models - Supplied with a remotetransformer• SELV Models Suitable for ‘Zone 1’installation Air Pressure Sensor Auto speed selection at installation. The integralair pressure sensor checks the airflow when firstinstalled and also helps the fan to compensate forexternal wind pressure. BPC Support We don’t sell boxes we provide a service that few can match Free Lifetime Technical support on purchased items Largest independent MVHR suppliers Lowest cost on full systems guarantees Inhouse design Team Inhouse certified training Largest rage and stock available Worldwide delivery options Solutions available from Value to prestige housing  

GBP 112.32
1

Vent Axia Integra

Vent Axia Integra

Vent Axia Integra Product Part Number Vent Axia Integra - 456864 Description The Integra heat recovery unit has been specially designed to provide ventilation for flats or rooms in residential, commercial, educational or leisure applications. Balanced ventilation is achieved by using nominal 100mm diameter rigid ducting. Using a high performance, polymeric heat exchange cube, together with two powerful fans, the Vent-Axia Integra achieves efficiency of up to 70%.  The compact cube interleaves outgoing moist air with incoming fresh air, allowing the heat from one to warm the other without the two air streams mixing. Energy is saved on room heating, with no power being used by the cube itself. Filtration Independent filtration is required Controllability The normal unit has two speeds of Boost/Trickle ventilation when used with humidity sensors or a manual wall switch. 95 x 225 x 75mm (H x W x D) An optional 150VA Surface Mounting Transformer is available with six voltage selections for trickle settings to match dwelling volume.  Construction The enclosure is constructed of powder coated galvanised metal Motors The unit has 2 x low energy, high efficiency D/C fan motors Installation The Vent-Axia Integra is designed for mounting in ceiling voids, lofts or above a suspended ceiling. Four 100mm spigots are provided for simple connection to insulated flexible or rigid ventilation ducting. The unit comes complete with a 22mm condensate outlet situated on the base of the unit, this should be connected to a suitable outlet for condensate drainage. Accessories In addition to a choice of compatible ducting systems a full range of controls, sensors, in-line silencers, floor/wall/ceiling inlet and outlet diffusers are available to complete the installation.

GBP 998.40
1

Vent Axia Lo-Carbon Multivent MVDC-MSH unit with Humidity Sensor

Vent Axia Lo-Carbon Multivent MVDC-MSH unit with Humidity Sensor

Vent Axia Lo-Carbon Multivent MVDC-MSH unit with Humidity Sensor Product Part Number Vent Axia MVDC-MSH - 443298 Key Features Internal Humidity sensor Ultra-quiet - acoustically lined for low noise levels Recognised in SAP Appendix Q Complies with Building ADF (System 3) Option of wall, ceiling, and loft mounting Improved controllability The unit has Long life, low energy multispeed DC motor Ceiling, wall, or floor Installation is recommended  PVC outer casing with an acoustic lining is included as standard, ensuring minimum noise levels. Technical Features Max Airflow of 350m3/h Best in class Specific Fan Power (SFP) as low as 0.15 wls Dimensions (mm) 330 long x 391 wide x 248 high Fitted with four extract 125 or 100mm diameter spigots allowing quick connection to ducts Switched Live Boost connection Fully variable normal and boost speeds Fully serviceable unit with all parts accessible 2-year standard or optional 5-year parts warranty Controllability The potentiometer-controlled speed selector allows accurate setting of airflow The unit has 2 fully variable speeds for trickle and boost, with an inbuilt humidistat activation for the boost speed. A switched live (LS) can also be used to select boost speed when wired through an Isolator Relay (Part No. 442030 - not supplied). An additional third speed (purge) is available using a second switched live connection. MVDC-MS H (443298) the Boost setting is activated by the internal humidity sensor. The internal humidity sensor uses one of the two available LS inputs, the other remaining LS input can be used to switch the unit to Purge speed.  MVDC-MS H has the option to switch from Normal to Boost speed (in effect over-riding the internal humidity sensor), this can be achieved by connecting an isolated switched live connection to the LS connection on the power supply terminal block. This must be isolated by using, for example an Isolator Relay Control, Vent-Axia part number 442030, or similar. Isolator relay controller, Vent-Axia part number 442030

GBP 204.00
1

Vent Axia Lo-Carbon VA100 LT

Vent Axia Lo-Carbon VA100 LT

Vent-Axia LO-CARBON VA100 LT Product Part Number Vent Axia VA100 LT - 251210 Description Lo-Carbon VA100 LT (Timer) Electronic adjustable overrun timer (5-30 minutes). Indication light. 2 speed options. Stock Ref. No: 251210 Long Life Ventilation VA100 The improved Vent-Axia Lo-Carbon VA100 range features Lo-Carbon long life DC motors that are more efficient than conventional motors whilst delivering up to 87% energy savings. Shutters The Vent-Axia Lo-Carbon VA100 range is fitted with a motorised shutter mechanism that uses no extra power in operation or off. Installation Fitted with integral protection against low energy lighting circuits, the VA100 is a 100mm axial fan suitable for use in the bathroom or toilet. VA100 is a quick and simple to fit product with easy-wire on one line terminals. Suitable for installation in window, walls or panels/ceilings at any angle using kits available. The 100mm telescopic wall kit fit walls 225 to 360mm thick.

GBP 59.60
4

Vent-Axia Sentinel Econiq S - 499883

Vent-Axia Sentinel Econiq S - 499883

Vent-Axia Sentinel Econiq S Product Part Number 499883 Description The Sentinel Econiq are Latest flagship and highest specification MVHR units from Vent Axia Vent Axia are the largest manufacture of heat recovery units in the UK and the Econiq S is suitable for houses with a max floor area of 210m2 With a combination of being easy to install with high-quality construction, SAP Appendix Q approval and has multiple control and commissioning options including smartphone control make this unit top of the list for all types of homes BPC Ventilation are the largest independent MVHR specialists and supply this unit with a 5-year parts warranty* and lifetime technical support on our top-quality systems. Key Features Suitable for floor areas up to 210m2 Delivers an airflow rate of up to 350 m³/hour @ 150 Pa High heat recovery efficiency of up to 93%. Low weight of only 32KG Digital controller on unit with optional wall mounting kit Easy Smartphone App Commissioning Sentinel-X wireless controls platform Full 100% automatic summer bypass to supply unheated air in the summer Sap Appendix Q (BRE) approved Approved Document F aligned commissioning wizard Internal humidity sensor for automatic speed control Ultra Quiet Unit mounted control panel Airtight Housing Latest highly efficient soft start EC3 Motors Up to 93% heat recovery Horizontal or vertical duct connections Sound levels as low as 15.5 dB(A) Left and Right configuration via control panel Manufactured in the UK PVC Counterflow heat recovery core 2 x G3 filters and Optional ePM10 (M5) and ePM2.5 (F7) filtration Multiple Control options including 0 to100% fan speed settings, Humidity, BMS, timer delay, 0-10v & 240v boost options Filter check RF858 connectivity, 802.11b/g/n Wi-Fi and Bluetooth low energy 4.2 Optional Wall mounting kit for controller Optional Acoustic enclosure and Top Box (S only) Optional HMI Kit Optional 0-10v, Co2, Temp, Humidity wired room sensors Optional wireless Temp, Humidity and 4 speed switches Optional 240v Co2, Temp, Humidity, PIR and 4 speed switches Optional AIM Alarm Interface Optional Volt free expansion board Optional 0-10v expansion board Optional Purge van integration UK manufactured MVHR unit with 5 Year parts warranty through BPC High Performance The Sentinel Econiq S benefits from the latest high efficiency, ED/DC backward curved impeller design, ensuring the lowest possible energy consumption, ultra quiet operation and an exceptional performance range to houses with a floor area of up to 220m2 With a high performance of 350 m3/hr at 150Pa while still achieving almost 93% heat recovery. The fully automatic capability of the Econiq range means that adequate ventilation is always achieved. Integral Humidity Sensor The integral humidity sensor increases speed in proportion to relative humidity levels, saving energy and reducing noise. The sensor also reacts to small but rapid increases in humidity, even if the normal trigger threshold is not reached. This unique feature ensures adequate ventilation, even for the smallest wet room. The nighttime relative humidity setback feature suppresses nuisance tripping as humidity gradually increases with falling temperature. Digital Controller A digital controller is supplied fitted to the unit allowing multiple options on programming and controllability, including 4 x Integral infinitely variable fan speed control on supply and extract there is also an optional kit allowing you to remove the controller from the unit and wall mount in your chosen location There is also a pin number facility to prevent accidental resetting of commissioning settings App Control The Vent-Axia Connect smartphone application allows full control with a multitude of functions from automated to fully adjustable from the comfort of the sofa on iOS and Android smartphones Orientation This unit can be electronically changed from right to left hand orientation Spigot Options The 200mm Spigots may be re-positioned from a vertical to a horizontal connection or a combination of vertical and horizontal connection. 100% summer By-pass During hot weather you can activate the summer By-Pass that will only bring the filtered air in at external temperatures allowing you to naturally cool your home Low Noise Levels The Lo-Carbon Sentinel Econiq is one of the

GBP 1902.72
1

Vent-Axia Sentinel Econiq M - 499632

Vent-Axia Sentinel Econiq M - 499632

Vent-Axia Sentinel Econiq M Product Part Number 499632 Description The Sentinel Econiq are Latest flagship and highest specification MVHR units from Vent Axia Vent Axia are the largest manufacture of heat recovery units in the UK and the Econiq L is suitable for houses with a max floor area of 270m2 With a combination of being easy to install with high-quality construction, SAP Appendix Q approval and has multiple control and commissioning options including smartphone control make this unit top of the list for all types of homes BPC Ventilation are the largest independent MVHR specialists and supply this unit with a 5-year parts warranty* and lifetime technical support on our top-quality systems. Key Features Suitable for floor areas up to 270m2 Delivers an airflow rate of up to 450 m³/hour @ 150 Pa High heat recovery efficiency of up to 93%. Low weight of only 55KG Digital controller on unit with optional wall mounting kit Easy Smartphone App Commissioning Sentinel-X wireless controls platform Full 100% automatic summer bypass to supply unheated air in the summer Sap Appendix Q (BRE) approved Approved Document F aligned commissioning wizard Internal humidity sensor for automatic speed control Ultra Quiet Unit mounted control panel Airtight Housing Latest highly efficient soft start EC3 Motors Up to 93% heat recovery Horizontal or vertical duct connections Sound levels as low as 15.5 dB(A) Left and Right configuration via control panel Manufactured in the UK PVC Counterflow heat recovery core 2 x G3 filters and Optional ePM10 (M5) and ePM2.5 (F7) filtration Multiple Control options including 0 to100% fan speed settings, Humidity, BMS, timer delay, 0-10v & 240v boost options Filter check RF858 connectivity, 802.11b/g/n Wi-Fi and Bluetooth low energy 4.2 Optional Wall mounting kit for controller Optional HMI Kit Optional 0-10v, Co2, Temp, Humidity wired room sensors Optional wireless Temp, Humidity and 4 speed switches Optional 240v Co2, Temp, Humidity, PIR and 4 speed switches Optional AIM Alarm Interface Optional Volt free expansion board Optional 0-10v expansion board Optional Purge van integration UK manufactured MVHR unit with 5 Year parts warranty through BPC High Performance The Sentinel Econiq M benefits from the latest high efficiency, ED/DC backward curved impeller design, ensuring the lowest possible energy consumption, ultra quiet operation and an exceptional performance range to houses with a floor area of up to 270m2 With a high performance of 450 m3/hr at 150Pa while still achieving almost 93% heat recovery. The fully automatic capability of the Econiq range means that adequate ventilation is always achieved. Integral Humidity Sensor The integral humidity sensor increases speed in proportion to relative humidity levels, saving energy and reducing noise. The sensor also reacts to small but rapid increases in humidity, even if the normal trigger threshold is not reached. This unique feature ensures adequate ventilation, even for the smallest wet room. The nighttime relative humidity setback feature suppresses nuisance tripping as humidity gradually increases with falling temperature. Digital Controller A digital controller is supplied fitted to the unit allowing multiple options on programming and controllability, including 4 x Integral infinitely variable fan speed control on supply and extract there is also an optional kit allowing you to remove the controller from the unit and wall mount in your chosen location There is also a pin number facility to prevent accidental resetting of commissioning settings App Control The Vent-Axia Connect smartphone application allows full control with a multitude of functions from automated to fully adjustable from the comfort of the sofa on iOS and Android smartphones Orientation This unit can be electronically changed from right to left hand orientation Spigot Options The 200mm Spigots may be re-positioned from a vertical to a horizontal connection or a combination of vertical and horizontal connection. 100% summer By-pass During hot weather you can activate the summer By-Pass that will only bring the filtered air in at external temperatures allowing you to naturally cool your home Low Noise Levels The Lo-Carbon Sentinel Econiq is one of the quietest systems on the market, with a noise level as low

GBP 2691.84
1

Vent-Axia Sentinel Econiq L - 499641

Vent-Axia Sentinel Econiq L - 499641

Vent-Axia Sentinel Econiq L Product Part Number 499641 Description The Sentinel Econiq are Latest flagship and highest specification MVHR units from Vent Axia Vent Axia are the largest manufacture of heat recovery units in the UK and the Econiq L is suitable for houses with a max floor area of 360m2 With a combination of being easy to install with high-quality construction, SAP Appendix Q approval and has multiple control and commissioning options including smartphone control make this unit top of the list for all types of homes BPC Ventilation are the largest independent MVHR specialists and supply this unit with a 5-year parts warranty* and lifetime technical support on our top-quality systems. Key Features Suitable for floor areas up to 360m2 Delivers an airflow rate of up to 600 m³/hour @ 150 Pa High heat recovery efficiency of up to 93%. Low weight of only 55KG Digital controller on unit with optional wall mounting kit Easy Smartphone App Commissioning Sentinel-X wireless controls platform Full 100% automatic summer bypass to supply unheated air in the summer Sap Appendix Q (BRE) approved Approved Document F aligned commissioning wizard Internal humidity sensor for automatic speed control Ultra Quiet Unit mounted control panel Airtight Housing Latest highly efficient soft start EC3 Motors Up to 93% heat recovery Horizontal or vertical duct connections Sound levels as low as 15.5 dB(A) Left and Right configuration via control panel Manufactured in the UK PVC Counterflow heat recovery core 2 x G3 filters and Optional ePM10 (M5) and ePM2.5 (F7) filtration Multiple Control options including 0 to100% fan speed settings, Humidity, BMS, timer delay, 0-10v & 240v boost options Filter check RF858 connectivity, 802.11b/g/n Wi-Fi and Bluetooth low energy 4.2 Optional comfort cooling Optional Wall mounting kit for controller Optional HMI Kit Optional 0-10v, Co2, Temp, Humidity wired room sensors Optional wireless Temp, Humidity and 4 speed switches Optional 240v Co2, Temp, Humidity, PIR and 4 speed switches Optional AIM Alarm Interface Optional Volt free expansion board Optional 0-10v expansion board Optional Purge fan integration UK manufactured MVHR unit with 5 Year parts warranty through BPC High Performance The Sentinel Econiq S benefits from the latest high efficiency, ED/DC backward curved impeller design, ensuring the lowest possible energy consumption, ultra quiet operation and an exceptional performance range to houses with a floor area of up to 360m2 With a high performance of 600 m3/hr at 150Pa while still achieving almost 93% heat recovery. The fully automatic capability of the Econiq range means that adequate ventilation is always achieved. Integral Humidity Sensor The integral humidity sensor increases speed in proportion to relative humidity levels, saving energy and reducing noise. The sensor also reacts to small but rapid increases in humidity, even if the normal trigger threshold is not reached. This unique feature ensures adequate ventilation, even for the smallest wet room. The nighttime relative humidity setback feature suppresses nuisance tripping as humidity gradually increases with falling temperature. Digital Controller A digital controller is supplied fitted to the unit allowing multiple options on programming and controllability, including 4 x Integral infinitely variable fan speed control on supply and extract there is also an optional kit allowing you to remove the controller from the unit and wall mount in your chosen location There is also a pin number facility to prevent accidental resetting of commissioning settings App Control The Vent-Axia Connect smartphone application allows full control with a multitude of functions from automated to fully adjustable from the comfort of the sofa on iOS and Android smartphones Orientation This unit can be electronically changed from right to left hand orientation Spigot Options The 200mm Spigots may be re-positioned from a vertical to a horizontal connection or a combination of vertical and horizontal connection. 100% summer By-pass During hot weather you can activate the summer By-Pass that will only bring the filtered air in at external temperatures allowing you to naturally cool your home Low Noise Levels The Lo-Carbon Sentinel Econiq is one of the quietest systems on the

GBP 3171.84
1

Vent Axia Lo-Carbon Multivent MVDC-MS unit

Vent Axia Lo-Carbon Multivent MVDC-MS unit

Vent Axia Lo-Carbon Multivent MVDC-MS Unit Product Part Number Vent Axia MVDC-MS - 437634 Key Features Variable speed settings Ultra-quiet - acoustically lined for low noise levels Complies with Building ADF (System 3) Option of wall, ceiling, and loft mounting Improved controllability The unit has Long life, low energy multispeed DC motor PVC outer casing with an acoustic lining is included as standard, ensuring minimum noise levels Technical Features Max Airflow of 350m3/h Best in class Specific Fan Power (SFP) as low as 0.15 wls Dimensions (H x W x D) 310mm x 360mm x 249mm Fitted with four extract 125 or 100mm diameter spigots allowing quick connection to ducts Recognised in SAP Appendix Q Switched Live Boost connection Fully variable normal and boost speeds Fully serviceable unit with all parts accessible 2-year standard or optional 5-year parts warranty  Controllability The potentiometer-controlled speed selector allows accurate setting of airflow The unit has 2 fully variable speeds for trickle and boost, with an inbuilt humidistat activation for the boost speed. A switched live (LS) can also be used to select boost speed when wired through an Isolator Relay (Part No. 442030 - not supplied). An additional third speed (purge) is available using a second switched live connection. Isolator relay controller, Vent-Axia part number 442030

GBP 279.00
1

Vent Axia Centra HT

Vent Axia Centra HT

Lo-Carbon Centra HT (Humidistat/Timer) For bathroom/toilet applications, the continuousrunning HT model is automatically boosted by thebuilt-in humidistat or by a switched live input whichactivates the adjustable timer (5-30 minutes). Product Part Number 473827 Description The Lo-Carbon Centra meets the latest requirementsof the Building Regulations Approved Document Ffor wholehouse system ventilation.Selection of the two normal flow rates (6l/s or9l/s) is via a simple ‘jumper’ on the control board.Different methods are available for operatingboost speed from a simple switched live to integralhumidistat. See individual models for further details.The attractive and discreet styling of the Vent-AxiaLo-Carbon Centra will complement the décorof any new home while virtually silent operationensures optimum ventilation is achieved withoutintrusive noise. Key Features • Building Regulations ApprovedDocuments F and L compliant, System 3Continuous mechanical extract• Recognised in SAP Appendix Q- Low SFP on SAP Q• Quietest dMEV available• Discreet, tasteful styling• Single fan for use in all applications• IPX4 rated - IPX7 rated (SELV)• Pressure detection device• Normal and Boost speeds• Lo-Carbon motor offering 90% energysavings and long life• 5 Year Motor Guarantee• Suitable for wall, ceiling, panel andwindow mounting• SELV Models - Supplied with a remotetransformer• SELV Models Suitable for ‘Zone 1’installation BPC Support We don’t sell boxes we provide a service that few can match Free Lifetime Technical support on purchased items Largest independent MVHR suppliers Lowest cost on full systems guarantees Inhouse design Team Inhouse certified training Largest rage and stock available Worldwide delivery options Solutions available from Value to prestige housing  

GBP 166.92
1

Vent Axia Centra T

Vent Axia Centra T

Lo-Carbon Centra T Ideal for bathroom and toilet applications, this unitruns continuously on trickle setting and may beboosted by the switched live input which activatesthe adjustable timer (5-30 minutes). Product Part Number 473825 Description The Lo-Carbon Centra meets the latest requirementsof the Building Regulations Approved Document Ffor wholehouse system ventilation.Selection of the two normal flow rates (6l/s or9l/s) is via a simple ‘jumper’ on the control board.Different methods are available for operatingboost speed from a simple switched live to integralhumidistat. See individual models for further details.The attractive and discreet styling of the Vent-AxiaLo-Carbon Centra will complement the décorof any new home while virtually silent operationensures optimum ventilation is achieved withoutintrusive noise. Key Features • Building Regulations ApprovedDocuments F and L compliant, System 3Continuous mechanical extract• Recognised in SAP Appendix Q- Low SFP on SAP Q• Quietest dMEV available• Discreet, tasteful styling• Single fan for use in all applications• IPX4 rated - IPX7 rated (SELV)• Pressure detection device• Normal and Boost speeds• Lo-Carbon motor offering 90% energysavings and long life• 5 Year Motor Guarantee• Suitable for wall, ceiling, panel andwindow mounting• SELV Models - Supplied with a remotetransformer• SELV Models Suitable for ‘Zone 1’installation BPC Support We don’t sell boxes we provide a service that few can match Free Lifetime Technical support on purchased items Largest independent MVHR suppliers Lowest cost on full systems guarantees Inhouse design Team Inhouse certified training Largest rage and stock available Worldwide delivery options Solutions available from Value to prestige housing  

GBP 123.24
1