55 results (0,20007 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Sherwood 1" HSS T/S Sp/Fl Machine Reamer

Sherwood 1" HSS T/S Sp/Fl Machine Reamer

Sherwood machine reamers are used to produce a close tolerance surface finish by enlarging pre-drilled holes to a finished size. Manufactured from HSS with a 45 bevelled head. Conform to BS 122 : Part 2 and BS 328 Part 4. INCH TOLERANCES: Diameter: ~ up to 7/64". Tolerance: +0.0003, -0.0001. Diameter: Over 7/64" ~ up to 15/64". Tolerance: +0.0004, -0.0002. Diameter: Over 15/64" ~ up to 25/64". Tolerance: +0.0005, -0.0002. Diameter: Over 25/64 ~ up to 43/64". Tolerance: +0.0006, -0.0003. Diameter: Over 43/64 ~ up to 1 1/8". Tolerance: +0.0007, -0.0004. Diameter: Over 1 1/8" ~ up to 1 1/2". Tolerance: +0.0008, -0.0004. Diameter: Over 1 1/2" ~ up to 2". Tolerance: +0.0010, -0.0005.

GBP 69.99
1

Sherwood 63/64" HSS T/S Sp/Fl Machine Reamer

Sherwood 63/64" HSS T/S Sp/Fl Machine Reamer

Sherwood machine reamers are used to produce a close tolerance surface finish by enlarging pre-drilled holes to a finished size. Manufactured from HSS with a 45 bevelled head. Conform to BS 122 : Part 2 and BS 328 Part 4. INCH TOLERANCES: Diameter: ~ up to 7/64". Tolerance: +0.0003, -0.0001. Diameter: Over 7/64" ~ up to 15/64". Tolerance: +0.0004, -0.0002. Diameter: Over 15/64" ~ up to 25/64". Tolerance: +0.0005, -0.0002. Diameter: Over 25/64 ~ up to 43/64". Tolerance: +0.0006, -0.0003. Diameter: Over 43/64 ~ up to 1 1/8". Tolerance: +0.0007, -0.0004. Diameter: Over 1 1/8" ~ up to 1 1/2". Tolerance: +0.0008, -0.0004. Diameter: Over 1 1/2" ~ up to 2". Tolerance: +0.0010, -0.0005.

GBP 69.99
1

Sherwood 15/16" HSS T/S Sp/Fl Machine Reamer

Sherwood 15/16" HSS T/S Sp/Fl Machine Reamer

Sherwood machine reamers are used to produce a close tolerance surface finish by enlarging pre-drilled holes to a finished size. Manufactured from HSS with a 45 bevelled head. Conform to BS 122 : Part 2 and BS 328 Part 4. INCH TOLERANCES: Diameter: ~ up to 7/64". Tolerance: +0.0003, -0.0001. Diameter: Over 7/64" ~ up to 15/64". Tolerance: +0.0004, -0.0002. Diameter: Over 15/64" ~ up to 25/64". Tolerance: +0.0005, -0.0002. Diameter: Over 25/64 ~ up to 43/64". Tolerance: +0.0006, -0.0003. Diameter: Over 43/64 ~ up to 1 1/8". Tolerance: +0.0007, -0.0004. Diameter: Over 1 1/8" ~ up to 1 1/2". Tolerance: +0.0008, -0.0004. Diameter: Over 1 1/2" ~ up to 2". Tolerance: +0.0010, -0.0005.

GBP 79.99
1

Sherwood 7/8" HSS T/S Sp/Fl Machine Reamer

Sherwood 7/8" HSS T/S Sp/Fl Machine Reamer

Sherwood machine reamers are used to produce a close tolerance surface finish by enlarging pre-drilled holes to a finished size. Manufactured from HSS with a 45 bevelled head. Conform to BS 122 : Part 2 and BS 328 Part 4. INCH TOLERANCES: Diameter: ~ up to 7/64". Tolerance: +0.0003, -0.0001. Diameter: Over 7/64" ~ up to 15/64". Tolerance: +0.0004, -0.0002. Diameter: Over 15/64" ~ up to 25/64". Tolerance: +0.0005, -0.0002. Diameter: Over 25/64 ~ up to 43/64". Tolerance: +0.0006, -0.0003. Diameter: Over 43/64 ~ up to 1 1/8". Tolerance: +0.0007, -0.0004. Diameter: Over 1 1/8" ~ up to 1 1/2". Tolerance: +0.0008, -0.0004. Diameter: Over 1 1/2" ~ up to 2". Tolerance: +0.0010, -0.0005.

GBP 46.99
1

Sherwood 1.1/8" HSS T/S Sp/Fl Machine Reamer

Sherwood 1.1/8" HSS T/S Sp/Fl Machine Reamer

Sherwood machine reamers are used to produce a close tolerance surface finish by enlarging pre-drilled holes to a finished size. Manufactured from HSS with a 45 bevelled head. Conform to BS 122 : Part 2 and BS 328 Part 4. INCH TOLERANCES: Diameter: ~ up to 7/64". Tolerance: +0.0003, -0.0001. Diameter: Over 7/64" ~ up to 15/64". Tolerance: +0.0004, -0.0002. Diameter: Over 15/64" ~ up to 25/64". Tolerance: +0.0005, -0.0002. Diameter: Over 25/64 ~ up to 43/64". Tolerance: +0.0006, -0.0003. Diameter: Over 43/64 ~ up to 1 1/8". Tolerance: +0.0007, -0.0004. Diameter: Over 1 1/8" ~ up to 1 1/2". Tolerance: +0.0008, -0.0004. Diameter: Over 1 1/2" ~ up to 2". Tolerance: +0.0010, -0.0005.

GBP 83.99
1

Sherwood 29/32" HSS T/S Sp/Fl Machine Reamer

Sherwood 29/32" HSS T/S Sp/Fl Machine Reamer

Sherwood machine reamers are used to produce a close tolerance surface finish by enlarging pre-drilled holes to a finished size. Manufactured from HSS with a 45 bevelled head. Conform to BS 122 : Part 2 and BS 328 Part 4. INCH TOLERANCES: Diameter: ~ up to 7/64". Tolerance: +0.0003, -0.0001. Diameter: Over 7/64" ~ up to 15/64". Tolerance: +0.0004, -0.0002. Diameter: Over 15/64" ~ up to 25/64". Tolerance: +0.0005, -0.0002. Diameter: Over 25/64 ~ up to 43/64". Tolerance: +0.0006, -0.0003. Diameter: Over 43/64 ~ up to 1 1/8". Tolerance: +0.0007, -0.0004. Diameter: Over 1 1/8" ~ up to 1 1/2". Tolerance: +0.0008, -0.0004. Diameter: Over 1 1/2" ~ up to 2". Tolerance: +0.0010, -0.0005.

GBP 52.99
1

Sherwood 13/16" HSS T/S Sp/Fl Machine Reamer

Sherwood 13/16" HSS T/S Sp/Fl Machine Reamer

Sherwood machine reamers are used to produce a close tolerance surface finish by enlarging pre-drilled holes to a finished size. Manufactured from HSS with a 45 bevelled head. Conform to BS 122 : Part 2 and BS 328 Part 4. INCH TOLERANCES: Diameter: ~ up to 7/64". Tolerance: +0.0003, -0.0001. Diameter: Over 7/64" ~ up to 15/64". Tolerance: +0.0004, -0.0002. Diameter: Over 15/64" ~ up to 25/64". Tolerance: +0.0005, -0.0002. Diameter: Over 25/64 ~ up to 43/64". Tolerance: +0.0006, -0.0003. Diameter: Over 43/64 ~ up to 1 1/8". Tolerance: +0.0007, -0.0004. Diameter: Over 1 1/8" ~ up to 1 1/2". Tolerance: +0.0008, -0.0004. Diameter: Over 1 1/2" ~ up to 2". Tolerance: +0.0010, -0.0005.

GBP 44.99
1

Sherwood 12MM XM10 T-Slot Machine Clamp Set

Sherwood 12MM XM10 T-Slot Machine Clamp Set

The Atlas 58 Pieces Metric Sets are precision-engineered to address a wide range of clamping challenges and streamline setup. Crafted to exacting standards, these sets feature forged and hardened step clamps along with high-quality steel step blocks, ensuring robust performance. All components, excluding the studs, undergo heat treatment and receive a black oxide finish for enhanced durability. Designed to accommodate various metric and imperial T-Slot widths, these sets come in steel racks that offer easy wall-mounting or attachment to workbenches, providing efficient storage solutions. The M16 set further adds versatility with its wooden box. Elevate your clamping efficiency with Atlas Metric Sets, offering reliability and precision for diverse clamping needs. Features & Benefits Designed to save set up time and solve most clamping problems All step clamps are forged and hardened & the step blocks are made from high quality steel for increased productivity All components (except studs) are heat treated and finished in black oxide coating for enhanced performance Supplied in steel racks which can be wall mounted or fitted to workbenches for ease of storage (except M16 set which is supplied in wooden box) Available to suit a full range of metric T-Slot widths for a wide range of use Typical Applications Workholding Notes Range of sizes available

GBP 54.99
1

Sherwood 5/8inX1/2inX13TPI T-Slot Machine Clamp Set.unc

Sherwood 5/8inX1/2inX13TPI T-Slot Machine Clamp Set.unc

This 58-piece inch set is designed to save set-up time and solve most clamping problems, providing a comprehensive and durable clamping solution for machining, fabrication, and assembly operations. It includes forged and hardened step clamps, high-quality steel step blocks, studs, and other clamping components, all heat-treated and finished in black oxide. The set is available for a range of metric and imperial T-slot widths and comes supplied in steel racks (or a wooden box for the M16 set) for easy storage and organization, ensuring precise and secure clamping every time. Features and Benefits Forged and hardened step clamps High-quality steel step blocks Heat-treated and black oxide finished components Available for a range of metric and imperial T-slot widths Supplied in steel racks or wooden boxes for easy storage and organization

GBP 59.99
1

Sherwood 13.50MM HSS T/S Sp/Fl Machine Reamer

Sherwood 13.50MM HSS T/S Sp/Fl Machine Reamer

Used to produce a close tolerance surface finish by enlarging pre-drilled holes to a finished size. Manufactured from HSS with a 45 bevelled head. Manufactured to BS 328-4. TOLERANCES (to H7): Diameter: ~ up to 3.00. Tolerance: +0.008, -0.007. Diameter: Over 3.00 ~ up to 6.00. Tolerance: +0.010, -0.005. Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.012, -0.006. Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.015, -0.008. Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.017, -0.009. Diameter: Over 30.00 ~ up to 50.00. Tolerance: +0.021, -0.012. Diameter: Over 50.00 ~ up to 80.00. Tolerance: +0.025, -0.014. Diameter: Over 80.00 ~ up to 120.00. Tolerance: +0.029, -0.016.

GBP 55.99
1

Sherwood 18.00MM HSS T/S Sp/Fl Machine Reamer

Sherwood 18.00MM HSS T/S Sp/Fl Machine Reamer

Used to produce a close tolerance surface finish by enlarging pre-drilled holes to a finished size. Manufactured from HSS with a 45 bevelled head. Manufactured to BS 328-4. TOLERANCES (to H7): Diameter: ~ up to 3.00. Tolerance: +0.008, -0.007. Diameter: Over 3.00 ~ up to 6.00. Tolerance: +0.010, -0.005. Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.012, -0.006. Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.015, -0.008. Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.017, -0.009. Diameter: Over 30.00 ~ up to 50.00. Tolerance: +0.021, -0.012. Diameter: Over 50.00 ~ up to 80.00. Tolerance: +0.025, -0.014. Diameter: Over 80.00 ~ up to 120.00. Tolerance: +0.029, -0.016.

GBP 49.99
1

Sherwood 19.00MM HSS T/S Sp/Fl Machine Reamer

Sherwood 19.00MM HSS T/S Sp/Fl Machine Reamer

Used to produce a close tolerance surface finish by enlarging pre-drilled holes to a finished size. Manufactured from HSS with a 45 bevelled head. Manufactured to BS 328-4. TOLERANCES (to H7): Diameter: ~ up to 3.00. Tolerance: +0.008, -0.007. Diameter: Over 3.00 ~ up to 6.00. Tolerance: +0.010, -0.005. Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.012, -0.006. Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.015, -0.008. Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.017, -0.009. Diameter: Over 30.00 ~ up to 50.00. Tolerance: +0.021, -0.012. Diameter: Over 50.00 ~ up to 80.00. Tolerance: +0.025, -0.014. Diameter: Over 80.00 ~ up to 120.00. Tolerance: +0.029, -0.016.

GBP 59.99
1

Sherwood 17.00MM HSS T/S Sp/Fl Machine Reamer

Sherwood 17.00MM HSS T/S Sp/Fl Machine Reamer

Used to produce a close tolerance surface finish by enlarging pre-drilled holes to a finished size. Manufactured from HSS with a 45 bevelled head. Manufactured to BS 328-4. TOLERANCES (to H7): Diameter: ~ up to 3.00. Tolerance: +0.008, -0.007. Diameter: Over 3.00 ~ up to 6.00. Tolerance: +0.010, -0.005. Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.012, -0.006. Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.015, -0.008. Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.017, -0.009. Diameter: Over 30.00 ~ up to 50.00. Tolerance: +0.021, -0.012. Diameter: Over 50.00 ~ up to 80.00. Tolerance: +0.025, -0.014. Diameter: Over 80.00 ~ up to 120.00. Tolerance: +0.029, -0.016.

GBP 51.99
1

Sherwood 14.50MM HSS T/S Sp/Fl Machine Reamer

Sherwood 14.50MM HSS T/S Sp/Fl Machine Reamer

Used to produce a close tolerance surface finish by enlarging pre-drilled holes to a finished size. Manufactured from HSS with a 45 bevelled head. Manufactured to BS 328-4. TOLERANCES (to H7): Diameter: ~ up to 3.00. Tolerance: +0.008, -0.007. Diameter: Over 3.00 ~ up to 6.00. Tolerance: +0.010, -0.005. Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.012, -0.006. Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.015, -0.008. Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.017, -0.009. Diameter: Over 30.00 ~ up to 50.00. Tolerance: +0.021, -0.012. Diameter: Over 50.00 ~ up to 80.00. Tolerance: +0.025, -0.014. Diameter: Over 80.00 ~ up to 120.00. Tolerance: +0.029, -0.016.

GBP 79.99
1

Sherwood 18MM X M14 T-Slot Machine Clamp Set

Sherwood 18MM X M14 T-Slot Machine Clamp Set

The Atlas 58 Pieces Metric Sets are precision-engineered to address a wide range of clamping challenges and streamline setup. Crafted to exacting standards, these sets feature forged and hardened step clamps along with high-quality steel step blocks, ensuring robust performance. All components, excluding the studs, undergo heat treatment and receive a black oxide finish for enhanced durability. Designed to accommodate various metric and imperial T-Slot widths, these sets come in steel racks that offer easy wall-mounting or attachment to workbenches, providing efficient storage solutions. The M16 set further adds versatility with its wooden box. Elevate your clamping efficiency with Atlas Metric Sets, offering reliability and precision for diverse clamping needs. Features & Benefits Designed to save set up time and solve most clamping problems All step clamps are forged and hardened & the step blocks are made from high quality steel for increased productivity All components (except studs) are heat treated and finished in black oxide coating for enhanced performance Supplied in steel racks which can be wall mounted or fitted to workbenches for ease of storage (except M16 set which is supplied in wooden box) Available to suit a full range of metric T-Slot widths for a wide range of use Typical Applications Workholding Notes Range of sizes available

GBP 59.99
1

Sherwood 22.00MM HSS T/S Sp/Fl Machine Reamer

Sherwood 22.00MM HSS T/S Sp/Fl Machine Reamer

Used to produce a close tolerance surface finish by enlarging pre-drilled holes to a finished size. Manufactured from HSS with a 45 bevelled head. Manufactured to BS 328-4. TOLERANCES (to H7): Diameter: ~ up to 3.00. Tolerance: +0.008, -0.007. Diameter: Over 3.00 ~ up to 6.00. Tolerance: +0.010, -0.005. Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.012, -0.006. Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.015, -0.008. Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.017, -0.009. Diameter: Over 30.00 ~ up to 50.00. Tolerance: +0.021, -0.012. Diameter: Over 50.00 ~ up to 80.00. Tolerance: +0.025, -0.014. Diameter: Over 80.00 ~ up to 120.00. Tolerance: +0.029, -0.016.

GBP 69.99
1

Sherwood 15.50MM HSS T/S Sp/Fl Machine Reamer

Sherwood 15.50MM HSS T/S Sp/Fl Machine Reamer

Used to produce a close tolerance surface finish by enlarging pre-drilled holes to a finished size. Manufactured from HSS with a 45 bevelled head. Manufactured to BS 328-4. TOLERANCES (to H7): Diameter: ~ up to 3.00. Tolerance: +0.008, -0.007. Diameter: Over 3.00 ~ up to 6.00. Tolerance: +0.010, -0.005. Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.012, -0.006. Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.015, -0.008. Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.017, -0.009. Diameter: Over 30.00 ~ up to 50.00. Tolerance: +0.021, -0.012. Diameter: Over 50.00 ~ up to 80.00. Tolerance: +0.025, -0.014. Diameter: Over 80.00 ~ up to 120.00. Tolerance: +0.029, -0.016.

GBP 69.99
1

Sherwood 13.00MM HSS S/S Sp/Fl Machine Reamer

Sherwood 13.00MM HSS S/S Sp/Fl Machine Reamer

Manufactured from durable high speed steel with a left hand spiral flute for right hand cutting applications. Manufactured to BS 328-4. Features and Benefits HSS construction for increased durability 6 flutes for increased chip control Suitable for right handed cutting applications Notes Diameter: ~ up to 3.00. Tolerance: High +0.008, Low -0.004. Diameter: Over 3.00 ~ up to 6.00. Tolerance: High +0.010, Low -0.005. Diameter: Over 6.00 ~ up to 10.00. Tolerance: High +0.012, Low -0.006. Diameter: Over 10.00 ~ up to 18.00. Tolerance: High +0.015, Low -0.008. Standards Manufactured to BS 328-4

GBP 45.99
1

Sherwood 14.00MM HSS S/S Sp/Fl Machine Reamer

Sherwood 14.00MM HSS S/S Sp/Fl Machine Reamer

Manufactured from durable high speed steel with a left hand spiral flute for right hand cutting applications. Manufactured to BS 328-4. Features and Benefits HSS construction for increased durability 6 flutes for increased chip control Suitable for right handed cutting applications Notes Diameter: ~ up to 3.00. Tolerance: High +0.008, Low -0.004. Diameter: Over 3.00 ~ up to 6.00. Tolerance: High +0.010, Low -0.005. Diameter: Over 6.00 ~ up to 10.00. Tolerance: High +0.012, Low -0.006. Diameter: Over 10.00 ~ up to 18.00. Tolerance: High +0.015, Low -0.008. Standards Manufactured to BS 328-4

GBP 55.99
1

Sherwood 17.50MM HSS T/S Sp/Fl Machine Reamer

Sherwood 17.50MM HSS T/S Sp/Fl Machine Reamer

Used to produce a close tolerance surface finish by enlarging pre-drilled holes to a finished size. Manufactured from HSS with a 45 bevelled head. Manufactured to BS 328-4. TOLERANCES (to H7): Diameter: ~ up to 3.00. Tolerance: +0.008, -0.007. Diameter: Over 3.00 ~ up to 6.00. Tolerance: +0.010, -0.005. Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.012, -0.006. Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.015, -0.008. Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.017, -0.009. Diameter: Over 30.00 ~ up to 50.00. Tolerance: +0.021, -0.012. Diameter: Over 50.00 ~ up to 80.00. Tolerance: +0.025, -0.014. Diameter: Over 80.00 ~ up to 120.00. Tolerance: +0.029, -0.016.

GBP 69.99
1

Sherwood 23.00MM HSS T/S Sp/Fl Machine Reamer

Sherwood 23.00MM HSS T/S Sp/Fl Machine Reamer

Used to produce a close tolerance surface finish by enlarging pre-drilled holes to a finished size. Manufactured from HSS with a 45 bevelled head. Manufactured to BS 328-4. TOLERANCES (to H7): Diameter: ~ up to 3.00. Tolerance: +0.008, -0.007. Diameter: Over 3.00 ~ up to 6.00. Tolerance: +0.010, -0.005. Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.012, -0.006. Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.015, -0.008. Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.017, -0.009. Diameter: Over 30.00 ~ up to 50.00. Tolerance: +0.021, -0.012. Diameter: Over 50.00 ~ up to 80.00. Tolerance: +0.025, -0.014. Diameter: Over 80.00 ~ up to 120.00. Tolerance: +0.029, -0.016.

GBP 79.99
1

Sherwood 16mm x M14 T-Slot Machine Clamp Set

Sherwood 16mm x M14 T-Slot Machine Clamp Set

The Atlas 58 Pieces Metric Sets are precision-engineered to address a wide range of clamping challenges and streamline setup. Crafted to exacting standards, these sets feature forged and hardened step clamps along with high-quality steel step blocks, ensuring robust performance. All components, excluding the studs, undergo heat treatment and receive a black oxide finish for enhanced durability. Designed to accommodate various metric and imperial T-Slot widths, these sets come in steel racks that offer easy wall-mounting or attachment to workbenches, providing efficient storage solutions. The M16 set further adds versatility with its wooden box. Elevate your clamping efficiency with Atlas Metric Sets, offering reliability and precision for diverse clamping needs. Features & Benefits Designed to save set up time and solve most clamping problems All step clamps are forged and hardened & the step blocks are made from high quality steel for increased productivity All components (except studs) are heat treated and finished in black oxide coating for enhanced performance Supplied in steel racks which can be wall mounted or fitted to workbenches for ease of storage (except M16 set which is supplied in wooden box) Available to suit a full range of metric T-Slot widths for a wide range of use Typical Applications Workholding Notes Range of sizes available

GBP 59.99
1

Sherwood 20.00MM HSS T/S Sp/Fl Machine Reamer

Sherwood 20.00MM HSS T/S Sp/Fl Machine Reamer

Used to produce a close tolerance surface finish by enlarging pre-drilled holes to a finished size. Manufactured from HSS with a 45 bevelled head. Manufactured to BS 328-4. TOLERANCES (to H7): Diameter: ~ up to 3.00. Tolerance: +0.008, -0.007. Diameter: Over 3.00 ~ up to 6.00. Tolerance: +0.010, -0.005. Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.012, -0.006. Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.015, -0.008. Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.017, -0.009. Diameter: Over 30.00 ~ up to 50.00. Tolerance: +0.021, -0.012. Diameter: Over 50.00 ~ up to 80.00. Tolerance: +0.025, -0.014. Diameter: Over 80.00 ~ up to 120.00. Tolerance: +0.029, -0.016.

GBP 61.99
1

Sherwood 21.00MM HSS T/S Sp/Fl Machine Reamer

Sherwood 21.00MM HSS T/S Sp/Fl Machine Reamer

Used to produce a close tolerance surface finish by enlarging pre-drilled holes to a finished size. Manufactured from HSS with a 45 bevelled head. Manufactured to BS 328-4. TOLERANCES (to H7): Diameter: ~ up to 3.00. Tolerance: +0.008, -0.007. Diameter: Over 3.00 ~ up to 6.00. Tolerance: +0.010, -0.005. Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.012, -0.006. Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.015, -0.008. Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.017, -0.009. Diameter: Over 30.00 ~ up to 50.00. Tolerance: +0.021, -0.012. Diameter: Over 50.00 ~ up to 80.00. Tolerance: +0.025, -0.014. Diameter: Over 80.00 ~ up to 120.00. Tolerance: +0.029, -0.016.

GBP 69.99
1

Sherwood 16.00MM HSS S/S Sp/Fl Machine Reamer

Sherwood 16.00MM HSS S/S Sp/Fl Machine Reamer

Manufactured from durable high speed steel with a left hand spiral flute for right hand cutting applications. Manufactured to BS 328-4. Features and Benefits HSS construction for increased durability 6 flutes for increased chip control Suitable for right handed cutting applications Notes Diameter: ~ up to 3.00. Tolerance: High +0.008, Low -0.004. Diameter: Over 3.00 ~ up to 6.00. Tolerance: High +0.010, Low -0.005. Diameter: Over 6.00 ~ up to 10.00. Tolerance: High +0.012, Low -0.006. Diameter: Over 10.00 ~ up to 18.00. Tolerance: High +0.015, Low -0.008. Standards Manufactured to BS 328-4

GBP 59.99
1