67 results (0,19313 seconds)

Show all filters

Brand

Colour

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Makita LS1019L/2 260MM Double Bevel Slide Compound Mitre Saw with Laser 240V

Makita LS1019L/2 260MM Double Bevel Slide Compound Mitre Saw with Laser 240V

260mm Slide Compound Mitre Saw. Motor head slides on fixed pipes without extending to the rear of the machine, allowing the machine to be placed close to the wall. Saw Features: Built in laser guide. Motor head slides on fixed pipes without extending machine at rear end, so the machine can be placed close to wall. Front knob for easy bevel adjustment. Holders to support a wide workpiece. Easy-to-operate mitre angle lock. One-touch sliding lock. Large turn base. Connects to dust extractor. Electric brake. Soft start. Constant speed control. Double Insulation.

GBP 899.99
1

Makita LS1019L/1 260MM Double Bevel Slide Compound Mitre Saw with Laser 110V

Makita LS1019L/1 260MM Double Bevel Slide Compound Mitre Saw with Laser 110V

260mm Slide Compound Mitre Saw. Motor head slides on fixed pipes without extending to the rear of the machine, allowing the machine to be placed close to the wall. Saw Features: Built in laser guide. Motor head slides on fixed pipes without extending machine at rear end, so the machine can be placed close to wall. Front knob for easy bevel adjustment. Holders to support a wide workpiece. Easy-to-operate mitre angle lock. One-touch sliding lock. Large turn base. Connects to dust extractor. Electric brake. Soft start. Constant speed control. Double Insulation.

GBP 899.99
1

Makita LS1219/1 305MM Double Bevel Sliding Compound Mitre Saw - 110V

Makita LS1219/1 305MM Double Bevel Sliding Compound Mitre Saw - 110V

This compound mitre Saw has motor head slides on fixed pipes, so you can place the machine close to the wall without extending the machine at its rear. The holders help support a wide workpiece. Constant speed control and an easy to operate mitre angle lock means you'll get precision and power as dictated by you. Adjusting the bevel is easy with the front knob and you can connect the LS1219 to a dust extractor for quick and efficient cleaning. Features and Benefits: Motor head slides on fixed pipes without extending machine at rear end, so the machine can be placed close to wall. Front knob for easy bevel adjustment Holders to support a wide workpiece Easy-to-operate mitre angle lock One-touch sliding lock Large turn base Connects to dust extractor Electric brake Soft start Constant speed control Double Insulation

GBP 899.99
2

Makita LS1219/2 305MM Double Bevel Sliding Compound Mitre Saw - 240V

Makita LS1219/2 305MM Double Bevel Sliding Compound Mitre Saw - 240V

This compound mitre Saw has motor head slides on fixed pipes, so you can place the machine close to the wall without extending the machine at its rear. The holders help support a wide workpiece. Constant speed control and an easy to operate mitre angle lock means you'll get precision and power as dictated by you. Adjusting the bevel is easy with the front knob and you can connect the LS1219 to a dust extractor for quick and efficient cleaning. Features and Benefits: Motor head slides on fixed pipes without extending machine at rear end, so the machine can be placed close to wall. Front knob for easy bevel adjustment Holders to support a wide workpiece Easy-to-operate mitre angle lock One-touch sliding lock Large turn base Connects to dust extractor Electric brake Soft start Constant speed control Double Insulation

GBP 899.99
2

Makita LS1219L 305mm Slide Compound Mitre Saw with Laser 1450W 110V

Makita LS1219L 305mm Slide Compound Mitre Saw with Laser 1450W 110V

The Makita LS1219L Slide Compound Mitre Saw features a built-in laser guide. The motor head slides on fixed pipes without extending machine at rear end, so the machine can be placed close to a wall. The motor features a soft start feature and constant speed control with an electric brake for increased user control.There is a front knob for easy bevel adjustment and holders to support a wide workpiece. The mitre angle lock is easy to operate, there is also a one-touch sliding lock and large turn base for ease of use. The saw can be attached to a dust extractor if required. Specifications: Input Power: 240V 1,800W, 110V 1,450W.No Load Speed: 3,200/min.Blade Diameter: 305mm.Bore Diameter: 30mm.Max. Mitre Range: 60-60.Max. Mitre Cut: @90 92 x 382mm.Max. Bevel Range: 48-48.Weight: 29.5kg.

GBP 899.99
2

Makita DLS110Z Twin 18V LXT Brushless 260MM Slide Compound Mitre Saw Body Only Version - No Batteries Or Charger Supplied

Makita DLS110Z Twin 18V LXT Brushless 260MM Slide Compound Mitre Saw Body Only Version - No Batteries Or Charger Supplied

The Makita DLS110Z is a Twin 18v LXT Brushless 260mm Slide Compound Mitre Saw. It been designed based on the LS1019 mains machine. Features and Benefits: Brushless motor. Electric brake. Soft start. Rail-forward design: allows the rear of the machine to be placed close to the wall. Single sliding system enables smooth operation to produce superior cuts. Automatic Torque Drive Technology: Automatically changes the cutting speed according to load condition for an optimum operation. One-touch sliding lock. Front knob for easy bevel adjustment. Holders to support a wide workpiece. Easy-to-operate mitre angle lock. Large turn base. Connects to dust extractor. Similar power to AC machine.

GBP 819.99
1

Makita LS1219L 305mm Slide Compound Mitre Saw with Laser 1800W 240V MAKLS1219L2

Makita LS1219L 305mm Slide Compound Mitre Saw with Laser 1800W 240V MAKLS1219L2

The Makita LS1219L Slide Compound Mitre Saw features a built-in laser guide. The motor head slides on fixed pipes without extending machine at rear end, so the machine can be placed close to a wall. The motor features a soft start feature and constant speed control with an electric brake for increased user control.There is a front knob for easy bevel adjustment and holders to support a wide workpiece. The mitre angle lock is easy to operate, there is also a one-touch sliding lock and large turn base for ease of use. The saw can be attached to a dust extractor if required. Specifications: Input Power: 240V 1,800W, 110V 1,450W.No Load Speed: 3,200/min.Blade Diameter: 305mm.Bore Diameter: 30mm.Max. Mitre Range: 60-60.Max. Mitre Cut: @90 92 x 382mm.Max. Bevel Range: 48-48.Weight: 29.5kg.

GBP 899.99
1

Makita HR5212C SDS Max Rotary Demolition Hammer 1510W 110V MAKHR5212CL

Makita HR5212C SDS Max Rotary Demolition Hammer 1510W 110V MAKHR5212CL

The Makita HR5212C Rotary Demolition Hammer has been developed to provide higher operating efficiency and more comfort with unrivalled low levels of vibration. It has 2 modes of operation, Rotary Hammer and Hammer only. It has a Soft No Load function that automatically reduces the motor speed during idling to suppress the vibration of the machine body. The HR5212C is fitted with AVT (Anti-Vibration Technology, vibration absorbing housing. The speed of drilling is easily controlled via the variable speed control dial and it offers constant speed control, even in difficult applications. The soft start and torque limiter prevent damage to the machine and the ergonomic soft grip provides comfort even in prolonged periods of use. It is fitted with a SDS Max, one touch sliding chuck for easy bit installation and removal and has a lock on mechanism for chiselling mode. The LED service and power warning lights, prevent unnecessary damage and tell you when parts need replacing. The machine is also compatible with a dust extractor attachment, not supplied. Specification Input Power 1,510W No Load Speed 150-310/min. Impact Rate 1,100-2,250/bpm Impact Energy 19.1 joules Shank SDS Max Capacity Concrete 52mm, Core Diameter (TCT) 160mm Weight 11.9kg Vibration K Factor 1.5 m/sec. Vibration Chiselling 8.0 m/sec. Vibration Hammer Drilling 9.0 m/sec.

GBP 1099.99
1

Makita HR4511C SDS Max AVT Rotary Demolition Hammer 1350W 240V MAKHR4511C

Makita HR4511C SDS Max AVT Rotary Demolition Hammer 1350W 240V MAKHR4511C

The Makita HR4511C SDS Max AVT Rotary Demolition Hammer has 2 modes of operation: Rotary Hammer and Hammer only. It is fitted with an anti-vibration system for ultra-low vibration. It is also fitted with a padded, spring loaded, hinged rubberised grip and comes with 2 side handles for increased control.The hammer has a torque limiter so when drill hits reinforcement the torque limiter stops power and a recessed change lever mounted on top of machine to reduce breakage even if machine is dropped or laid down carelessly. The drill is double insulated for increased safety. Supplied with: 1 x Bit Grease, 1 x Depth Stop, 2 x Side Handles and 1 x Carry Case. Specifications: Input Power: 1,350W.No Load Speed: 130-280/min.Impact Rate: 1,250-2,750/bpm.Impact Energy: 9.4 Joules.Capacity: Concrete 45mm, TCT Core 125mm.Weight: 9.0kg. Vibration Chiselling : 7.0 m/sec.Vibration Hammer Drilling : 7.5 m/sec.

GBP 899.99
1

Makita LS1019 260MM DXT Double Bevel Slide Compound Mitre Saw 240V

Makita LS1019 260MM DXT Double Bevel Slide Compound Mitre Saw 240V

The Makita LS1019 Sliding Compound Mitre Saw has a motor head that slides on fixed pipes without extending the machine at the rear end, so the machine can be placed close to a wall. Fitted with a front knob for easy bevel adjustment and holders that support wider work pieces. Constant speed control and an easy to operate mitre angle lock for increased precision and power. Connect the LS1019 to a dust extractor for quick and efficient cleaning. The electric brake and soft start provide increased user safety. Supplied with 1 x TCT Saw Blade 260mm, 1 x Dust Bag, 1 x Triangular Rule, 1 x Vertical Vice and 1 x Hex Wrench Specification Input Power 1,510W No Load Speed 3,200/min. Blade 260 x 30mm Bore Max. Mitre Range 60-60 Max. Mitre Cut at 90 68 x 310mm Max. Bevel Range 48-48 Weight 26.1kg

GBP 929.99
1

Makita LS1019 260MM DXT Double Bevel Slide Compound Mitre Saw 110V

Makita LS1019 260MM DXT Double Bevel Slide Compound Mitre Saw 110V

The Makita LS1019 Sliding Compound Mitre Saw has a motor head that slides on fixed pipes without extending the machine at the rear end, so the machine can be placed close to a wall. Fitted with a front knob for easy bevel adjustment and holders that support wider work pieces. Constant speed control and an easy to operate mitre angle lock for increased precision and power. Connect the LS1019 to a dust extractor for quick and efficient cleaning. The electric brake and soft start provide increased user safety. Supplied with 1 x TCT Saw Blade 260mm, 1 x Dust Bag, 1 x Triangular Rule, 1 x Vertical Vice and 1 x Hex Wrench Specification Input Power 1,510W No Load Speed 3,200/min. Blade 260 x 30mm Bore Max. Mitre Range 60-60 Max. Mitre Cut at 90 68 x 310mm Max. Bevel Range 48-48 Weight 26.1kg

GBP 929.99
1

Makita HR4511C SDS Max AVT Rotary Demolition Hammer 1350W 110V MAKHR4511CL

Makita HR4511C SDS Max AVT Rotary Demolition Hammer 1350W 110V MAKHR4511CL

The Makita HR4511C SDS Max AVT Rotary Demolition Hammer has 2 modes of operation: Rotary Hammer and Hammer only. It is fitted with an anti-vibration system for ultra-low vibration. It is also fitted with a padded, spring loaded, hinged rubberised grip and comes with 2 side handles for increased control.The hammer has a torque limiter so when drill hits reinforcement the torque limiter stops power and a recessed change lever mounted on top of machine to reduce breakage even if machine is dropped or laid down carelessly. The drill is double insulated for increased safety. Supplied with: 1 x Bit Grease, 1 x Depth Stop, 2 x Side Handles and 1 x Carry Case. Specifications: Input Power: 1,350W.No Load Speed: 130-280/min.Impact Rate: 1,250-2,750/bpm.Impact Energy: 9.4 Joules.Capacity: Concrete 45mm, TCT Core 125mm.Weight: 9.0kg. Vibration Chiselling : 7.0 m/sec.Vibration Hammer Drilling : 7.5 m/sec.

GBP 999.99
1

Makita DHR400ZKU 18V X2 SDS-Max Rotary Hammer Drill 40MM BL LXT - Body Only Version - No Batteries Or Charger Supplied

Makita DHR400ZKU 18V X2 SDS-Max Rotary Hammer Drill 40MM BL LXT - Body Only Version - No Batteries Or Charger Supplied

Auto-Start Wireless System (AWS) - connects to compatible dust extractors with Bluetooth. The dust extractor automatically runs while the switch is on. Brushless motor. Variable speed. Electric brake. Soft start. Constant speed control. Torque limiter. LED job light. "Soft no load" function automatically reduces the motor speed during idling to suppress the vibration of the machine body. 2-mode operation: Rotation with hammering / Hammering only

GBP 719.99
1

Makita DA4031/1 110V 13mm 2-Speed Angle Drill

Makita DA4031/1 110V 13mm 2-Speed Angle Drill

The Makita DA4031 2 speed, reversible 13mm keyed chuck angle drill has an impressive 1050w motor with drilling speeds of 300rpm in the low gear and 1200rpm in the high gear. When drilling large holes it is always advisable to use the machine in the low gear as this is where you will achieve the highest torque, for this reason Makita have fitted the DA4031 with a torque limiter to the first gear for the user's safety when drilling large holes. Makita's DA4031 13mm (1/2") Angle Drill is Suited for pro's close-quarter works in corners, between joists or studs and smoothly drilling large holes for pipe or conduit. Fitted with an adjustable angle top handle and side handle for the users comfort, this machine is a must have tool for the professional tradesman. User benefits: Forward/reverse rotation. 2 speed selection, with variable speed on trigger. Torque limiter (1st gear only). Double Insulation.

GBP 599.99
1

Makita HR4511C SDS Max Rotary Demolition Hammer Drill with Avt (240V)

Makita HR4511C SDS Max Rotary Demolition Hammer Drill with Avt (240V)

Makita HR4511C SDS Max Rotary Demolition Hammer Drill with AVT, complete with 2 side handles, depth stop, bit grease and carrying case This Demolition Hammer features Makita's Anti Vibration Technology which dramatically cuts down the amount of vibration being transferred to the operator resulting in much less user fatigue. This works with an internal balancer which is moved by the air pressure created inside the drill housing by the hammer action. The balancer moves in the oposite direction thus acting as a perfectly timed counterbalance. This technology coupled with the padded, spring loaded, hinged rubberised grip means the HR4511C is unleashing all it's power in a forward motion, enabling it to be used for long periods of time with little vibration transferral to hands and arms. Features: Reduced vibration for less operator fatigue (AVT) Torque-Limiter - when drill hits reinforcement the Torque-Limiter stops power 16 Angle Settings of Chisel Bit - for added control LED lights - Green drill is electrified and flashing Red signifies brushes needing changed Recessed Change Lever - mounted on top of machine to reduce breakage even if machine is dropped or laid down carelessly Constant speed underload. Rotary hammer action. Hammer only action - no hammering while idling for longer machine life Double insulated - for extra safety Comes with: 2 Side handles Depth stop Bit grease Carrying case Specification: Max in Concrete: 45mm Core Bit Diameter (TCT): 125mm Joules: 13Js Blows per minute: 1,250-2,750bpm No Load Speed: 130-280rpm Input wattage: 1,350w Vibration: 7.5m/sec HO.7.0m/sec D handle Tri-Axial Net Weight: 8.4kg

GBP 899.99
1

Makita HR4511C SDS Max Rotary Demolition Hammer Drill with Avt (110V)

Makita HR4511C SDS Max Rotary Demolition Hammer Drill with Avt (110V)

Makita HR4511C SDS Max Rotary Demolition Hammer Drill with AVT, complete with 2 side handles, depth stop, bit grease and carrying case This Demolition Hammer features Makita's Anti Vibration Technology which dramatically cuts down the amount of vibration being transferred to the operator resulting in much less user fatigue. This works with an internal balancer which is moved by the air pressure created inside the drill housing by the hammer action. The balancer moves in the oposite direction thus acting as a perfectly timed counterbalance. This technology coupled with the padded, spring loaded, hinged rubberised grip means the HR4511C is unleashing all it's power in a forward motion, enabling it to be used for long periods of time with little vibration transferral to hands and arms. Features: Reduced vibration for less operator fatigue (AVT) Torque-Limiter - when drill hits reinforcement the Torque-Limiter stops power 16 Angle Settings of Chisel Bit - for added control LED lights - Green drill is electrified and flashing Red signifies brushes needing changed Recessed Change Lever - mounted on top of machine to reduce breakage even if machine is dropped or laid down carelessly Constant speed underload. Rotary hammer action. Hammer only action - no hammering while idling for longer machine life Double insulated - for extra safety Comes with: 2 Side handles Depth stop Bit grease Carrying case Specification: Max in Concrete: 45mm Core Bit Diameter (TCT): 125mm Joules: 13Js Blows per minute: 1,250-2,750bpm No Load Speed: 130-280rpm Input wattage: 1,350w Vibration: 7.5m/sec HO.7.0m/sec D handle Tri-Axial Net Weight: 8.4kg

GBP 899.99
1

Makita DHR242RMJ 18V 24mm SDS+ Plus Brushless Rotary Hammer Drill Including 2X 4.0AH Batteries, Charger and Makpac Type 4 Carry Case

Makita DHR242RMJ 18V 24mm SDS+ Plus Brushless Rotary Hammer Drill Including 2X 4.0AH Batteries, Charger and Makpac Type 4 Carry Case

The Makita DHR242 compact SDS+ drill is a 3 mode machine with rotary hammer for masonry drilling, hammer only for masonry chiselling and rotary only for drilling wood and steel and features variable speed and reverse. The DHR242 features a brushless DC motor which reduces energy loss by 30% giving longer battery run time and saves maintenance. A rubberised rear D grip and side handle make this tool extremely well balanced and comfortable to use and at just 3.3kg it is suitable for prolonged use. Easy-to-grip handle ergonomically designed to give maximum, power thrust, provide a sure and comfortable grip in any operation including overhead application, drilling with palm-up or palm-down grip. This machine will also accept the DX01 HEPA filter which attaches to the main unit and effectively traps all particle sizes with an efficiency rating of 99.75%. One touch slide chuck for SDS-plus bit. The tool body is separated into the upper and lower housings at the foot of handle portion where the houses are jointed with vibration absorbing cushion rubbers. Unique rubber joint construction suppresses the transmission of vibration to battery terminals, minimizing battery failures such as terminal breakage or poor electrical contact.

GBP 549.99
1

Makita HR4013C SDS Max Rotary Hammer with Avt 110V

Makita HR4013C SDS Max Rotary Hammer with Avt 110V

Makita HR4013C Rotary Hammer with SDS max and AVT, complete with carrying case, bit grease, depth rod and side handleThe Makita HR4013C was developed to provide higher operating efficiency and more comfort with unrivalled low level of vibration. Compared to the previous model HR4011C this machine gives 20% higher drilling efficiency and 45% higher chipping efficiency. With Rotary Hammer 4.5m/sec_ and Hammer 5.0m/sec_ vibration levels it makes this the worlds first 8 hour SDS-MAX rotary hammer.Features:One touch sliding chuck for easy bit installation and removalEasy to operate operation-mode change lever. Located on the top of the motor housing for reduced possibility of breakage"Soft no load" function automatically reduces the motor speed during idling to suppress the vibration of the machine bodyUnrivalled low level of vibration aided by vibration absorbing housingLED service light indicates when to replace carbon brushIn hammering mode, on/off switch is switchable between two switches to meet your application: For Continous or Intermittent chiseling applicationsComes with:Heavy duty carrying caseSide handleDepth stopGrease tubeClothSpecification:Impact energy: 8.0 JMax in concrete: 40 mmNo Load Speed: 250 - 500 rpmVibration - Chiselling: 4.5 m/sec_Vibration - Hammer Drilling: 5 m/sec_Vibration K factor: 1.5 m/sec_Impacts per minute: 1450 - 2900 ipmInput Wattage: 1000 wNet weight with pipes: 6.8 kg

GBP 849.99
1

Makita HR4013C SDS Max Rotary Hammer with Avt 240V

Makita HR4013C SDS Max Rotary Hammer with Avt 240V

Makita HR4013C Rotary Hammer with SDS max and AVT, complete with carrying case, bit grease, depth rod and side handleThe Makita HR4013C was developed to provide higher operating efficiency and more comfort with unrivalled low level of vibration. Compared to the previous model HR4011C this machine gives 20% higher drilling efficiency and 45% higher chipping efficiency. With Rotary Hammer 4.5m/sec_ and Hammer 5.0m/sec_ vibration levels it makes this the worlds first 8 hour SDS-MAX rotary hammer.Features:One touch sliding chuck for easy bit installation and removalEasy to operate operation-mode change lever. Located on the top of the motor housing for reduced possibility of breakage"Soft no load" function automatically reduces the motor speed during idling to suppress the vibration of the machine bodyUnrivalled low level of vibration aided by vibration absorbing housingLED service light indicates when to replace carbon brushIn hammering mode, on/off switch is switchable between two switches to meet your application: For Continous or Intermittent chiseling applicationsComes with:Heavy duty carrying caseSide handleDepth stopGrease tubeClothSpecification:Impact energy: 8.0 JMax in concrete: 40 mmNo Load Speed: 250 - 500 rpmVibration - Chiselling: 4.5 m/sec_Vibration - Hammer Drilling: 5 m/sec_Vibration K factor: 1.5 m/sec_Impacts per minute: 1450 - 2900 ipmInput Wattage: 1000 wNet weight with pipes: 6.8 kg

GBP 849.99
1