33 results (0,17427 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Makita DLX2202TJ1 LXT Combo Kit 18V 2 x 5.0Ah Li-ion

Makita DLX2202TJ1 LXT Combo Kit 18V 2 x 5.0Ah Li-ion

DLX2202TJ1 LXT Combo Kit 18V 2 x 5.0Ah Li-ion The Makita DLX2202TJ1 LXT Combo Kit contains the following: 1 x 18V DHP484 Combi Drill is fitted with a powerful brushless motor for increased run time and power. It has an all-metal gear construction with aluminium gear housing and 2 mechanical gears. Speed is controlled via the variable speed trigger and features forward/reverse rotation. No Load Speed: 0-500/0-2, 000/min. Impact Rate: 0-7, 500/0-30, 000/bpm. Max. Torque: 30/54Nm, Settings: 21 + drill. Capacity: Wood 38mm, Masonry 13mm, Steel 13mm. Weight: 1.8kg. 1 x 18V DJV182 Brushless Jigsaw with a top handle design and a brushless motor which produces a greater measure of torque per weight. Variable speed dial to suit blade speed to various applications. Strokes at No Load: 800-3, 500/min. Stroke Length: 26mm. Capacity: Steel: 10mm, Wood: 135mm, Aluminium: 20mm. Weight: 2.6kg.

GBP 0.00
1

Makita DEBWST06 Adjustable Mitre Saw Stand MAKDEBWST06

Makita DEBWST06 Adjustable Mitre Saw Stand MAKDEBWST06

The Makita DEBWST06 Adjustable Mitre Saw Stand has a sturdy yet lightweight aluminium construction with a total weight of 15.3kg. It has a maximum extended width of up to 2550mm. Easy to assemble, it features tool-less installation and removal of the mitre saw and trolley castors. Compatible with all Makita mitre saws except for the following models DLS600, LH1040/F and LH1201FL. Supplied with 1 x Saw Mount Bracket Set, 1 x Box Wrench, 1 x Hex Bolt and 1 x Flat Washer. Specification Height 850mm Closed Length 1.05m Open Length 2.55m Max. Loading 225kg Weight 15.3kg

GBP 0.00
1

Makita UB400MP 191F65-0 Blower Attachment

Makita UB400MP 191F65-0 Blower Attachment

Makita UB400MP 191F65-0 Blower Attachment The Makita UB400MP 191F65-0 quickly converts some Makita Split Shaft power units into a high powered Blower. Due to the low weight and high blowing force, paths and terraces can be quickly and easily cleared of leaves, grass clippings or snow. Fitted with a quick and easy tool-less installation. Suitable for Makita DUX18, EX2650LH and UX01G.Not compatible with DUX60 machine with serial numbers lower than 85630 and ending in Y. Features: Suitable for clearing leaves, grass clippings and other garden debris 810mm long, compact for easy transporting and storage Lightweight 80mm nozzle Blowing force 0 up to 13.1 N, maximum 0 to 57.4 m/s air speed Lever lock style system Not compatible with DUX60 machines with serial numbers lower than 85630 and ending with a Y Specification: Total length: 810mm Weight: 1.5kg

GBP 0.00
1

DBS180RTJ LXT Belt Sander 18V 2 x 5.0Ah Li-ion

DBS180RTJ LXT Belt Sander 18V 2 x 5.0Ah Li-ion

The Makita DBS180 LXT Belt Sander has a powerful brushless motor for increased runtime and a lock on function for reduced fatigue during long periods of use. An electric brake provides increased user safety. It has an adjustable sanding arm pivoting up to 160 for compact storage. For added safety the DBS180 will not start if the sanding arm is folded over 90. There is also an LED job light and it is connectible to a dust extractor with correct attachment (NOT supplied) . Specifications: Belt Speed: 600-1, 700/min. Belt Size: 9 x 533mm. Vacuum Cleaner Connection In/Out: 17/22mm. Weight: 1.8kg. The Makita DBS180RTJ LXT Belt Sander is supplied with: 2 x 18V 5.0Ah Li-ion Batteries. 1 x Additional Grip. 1 x Additional Grip Base. 1 x DC18RC 14.4-18V LXT Li-ion Battery Charger. 1 x MAKPAC TYPE 2 Case. Technical Specs Belt Speed: 600-1, 700/min. Belt Size: 9 x 533mm Vacuum Cleaner Connection In/Out: 17/22mm Weight: 1.8kg

GBP 0.00
1

VC2201MX Wet & Dry M-Class Dust Extractor 1050W 110V

VC2201MX Wet & Dry M-Class Dust Extractor 1050W 110V

VC2201MX Wet & Dry M-Class Dust Extractor 1050W 110V The Makita VC2201MX Wet & Dry M-Class Dust Extractor 1050W 110V will remove 99.9% of dust with a Limit Value for occupational exposure > 0.1 mg/m. The stainless steel tank is fitted with a large bumper that protects walls and furniture from bumps and scratches. It has 2 large rear wheels and 1 castor wheel for excellent stability and mobility. With a flat top design for stable and space saving storage. Internally there is an air flow sensor beeps when air flow is reduced by a clogged filter, full tank etc. Automatic Self-Cleaning Filter System: 2 triple structure filter units composed of powder filter, damper and prefilter. Specifications: Input Power: 1, 050W. Capacity: Wet 17 litres, Dry 22 litres. Max. Air Flow: 3.5m/min. Max. Sealed Suction: 22 kPa. Weight: 16kg. Technical Specs Input Power: 1, 050W Capacity: Wet 17 litres, Dry 22 litres Max. Air Flow: 3.5m/min. Max. Sealed Suction: 22 kPa Weight: 16kg

GBP 0.00
1

Makita LS1040N Mitre Saw 260mm 1650W 240V

Makita LS1040N Mitre Saw 260mm 1650W 240V

The Makita LS1040N Mitre Saw has a robust design delivering high-quality cuts. Adjustable extension arms and feet help to stabilise the machine whilst working with large timbers. Its electric brake increases user safety. Supplied with a dust collection bag for efficient dust and chip extraction. Specifications: Input Power: 1,650W.No Load Speed: 4600/min.Blade Diameter x Bore: 260 x 30mm.Max. Mitre Range: 45-90.Max. Mitre Cut: @90 90.5 x 95mm.Max. Bevel Range: 45-90.Weight: 12.4kg.

GBP 0.00
1

9557NBR 115mm Anti-Restart Grinder 840W 110V MAK9557NBRL

9557NBR 115mm Anti-Restart Grinder 840W 110V MAK9557NBRL

The Makita 9557NBR 115mm Grinder is ideal for general grinding and cutting applications. Fitted with a high-power motor that has an anti-restart function and soft start feature. The compact, lightweight design features a side handle for increased control. There is also a lock-on switch to reduce user fatigue. Supplied with 1 x Grinding Wheel, 1 x Wrench and 1 x Side Handle Specification Input Power 840W No Load Speed 11,000/min. Disc Size 115mm x 20mm Bore Spindle Size M14 x 2mm Weight 2.0kg

GBP 0.00
1

Makita 9557NBR 115mm Anti-Restart Grinder 840W 240V MAK9557NBR

Makita 9557NBR 115mm Anti-Restart Grinder 840W 240V MAK9557NBR

The Makita 9557NBR 115mm Grinder is ideal for general grinding and cutting applications. Fitted with a high-power motor that has an anti-restart function and soft start feature. The compact, lightweight design features a side handle for increased control. There is also a lock-on switch to reduce user fatigue. Supplied with 1 x Grinding Wheel, 1 x Wrench and 1 x Side Handle Specification Input Power 840W No Load Speed 11,000/min. Disc Size 115mm x 20mm Bore Spindle Size M14 x 2mm Weight 2.0kg

GBP 0.00
1

Makita DPJ180Z LXT Biscuit Jointer 18V Bare Unit MAKDPJ180Z

Makita DPJ180Z LXT Biscuit Jointer 18V Bare Unit MAKDPJ180Z

The Makita DPJ180 LXT Biscuit Jointer has a compact, lightweight design with an easy-to-grip slim motor housing. Fitted with an angle adjustable fence that has positive stops at 0, 45 and 90. There are also 6 preset cutting depths. The anti-restart function and electronic current limiter, both with a warning lamp, provide additional safety. A shaft lock provides easy blade change. The dust nozzle is rotatable for easy connection to dust extraction. Comes as a Bare Unit, No Battery or Charger. Specification No Load Speed 6,500/min. Blade Diameter 100mm, Thickness 4mm Hole Diameter 22mm Weight 2.8kg

GBP 0.00
1

Makita DJR183Z Reciprocating Saw 18V Bare Unit MAKDJR183Z

Makita DJR183Z Reciprocating Saw 18V Bare Unit MAKDJR183Z

The Makita DJR183 Reciprocating Saw has a tool-less blade clamp which makes it easy to remove/change the blade. There are 2 switch levers with variable speed control. There is a trigger switch on tool handle and a paddle switch on tool body, to make operation easier in any grip position. The rubberised soft grip provides a comfortable and secure grip. There is also a single LED job light with pre-glow function. Comes as a Bare Unit, No Battery or Charger. Specification Strokes at No Load 0-3,000/min. Stroke Length 13mm Capacity Wood 50mm, Mild Steel Pipe 50mm Weight 1.5kg

GBP 0.00
1

SP6000J 165mm Plunge Saw 1300W 240V

SP6000J 165mm Plunge Saw 1300W 240V

The Makita SP6000J Plunge Saw features a depth stopper for splinter-free cutting. It has a kick-resistant design and comes complete with a MAKPAC connector case. Fitted with a soft start feature and electronic speed control for constant speed under load. Specification Input Power 1,300W No Load Speed 2,000-5,200/min. Blade 165 x 20mm bore Depth of Cut @90 55mm, @45 39mm Weight 4.2kg All vibration figures quoted are Tri-axial to EN60745 2006. Noise Sound Pressure 91 dB(A) Noise Sound Power 102 dB(A) Noise K Factor 3 dB(A) Vibration K Factor 1.5 m/sec Vibration Cutting Chipboard 2.5 m/sec

GBP 0.00
1

Makita 194733-8 Dust Nozzle for Router

Makita 194733-8 Dust Nozzle for Router

The Makita 194733-8 Dust Nozzle is designed to be used with the RP0900, RT0700C and RT0701C compact routers The Makita 194733-8 Dust Nozzle offers efficient dust extraction while routing. It is compatible with the Makita RP0900, RT0700C and RT0701C compact routers when using the Plunge Base to limit the amount of sawdust expelled into the air by the router. Features: For dust extraction while routing Durable plastic construction for long life For use with Makita 1-1/4 HP Compact Router models RP0900, RT0700C and RT0701C when using the Plunge Base Designed to limit the amount of sawdust expelled into the air by the router Specification: Net weight: 0.3kg

GBP 3.99
1

Makita DGP180Z LXT Grease Gun 18V Bare Unit MAKDGP180Z

Makita DGP180Z LXT Grease Gun 18V Bare Unit MAKDGP180Z

The Makita DGP180 LXT Grease Gun features two speed modes slow and auto speed change. Auto speed change mode applies grease while varying the flow rate, automatically matching the resistance of the part being greased. Bulk grease can be directly loadable into the barrel. Fitted with an ergonomically designed handle and soft grip for increased comfort. There is also a lock-on function, ideal for long work periods with reduced fatigue, and a handy LED job light. Supplied as a Bare Unit - No Battery or Charger. Supplied with 1 x Flexible Hose and 1 x Shoulder Strap. Specification Max. Operating Pressure 10,000 psi Flow Rate (Slow/Auto Speed) 145/290ml/min. Grease Capacity Cartridge 410g, Bulk 455g Flexible Hose Length 1,200mm Weight 4.8kg (without battery)

GBP 0.00
1

Makita DHP484z 18V LXT Brushless Combi Drill (Body Only)

Makita DHP484z 18V LXT Brushless Combi Drill (Body Only)

Makita 18V combi drill with brushless motor, compact length and LED job light The Makita DHP484Z features the Makita Brushless motor, precision-engineered to be up to 50% more efficient than a comparative model. Without brushes in place to apply friction a Brushless motor can produce a greater measure of torque per weight. With more torque at your disposal less power is required for day to day use, adding to the efficiency of the motor and extending the products overall lifetime as maintenance becomes less of an issue. The DHP484 has been developed to succeed model DHP480. This combi drill is sold without a battery, charger and carry case. Features: Brushless motor Electric brake 2 mechanical gears. Variable speed control by trigger Forward/reverse rotation LED job light Compact Overall Length of 182mm Keyless Chuck Aluminium Gear Housing All metal gear construction Ergonomic soft grip Comes With: Belt Clip Drill Bit Specification: Voltage: 18 v Capacity in Steel: 13 mm Capacity in Wood: 38 mm Chuck Capacity: 1.5 - 13 mm Capacity in Masonry: 13 mm Blows per Minute (Hi) - ipm: 0 - 30,000 ipm Blows per Minute (Lo) - ipm: 0 - 7,500 ipm Noise sound pressure: 88 dB(A) Noise sound power: 99 dB(A) Noise K factor: 3 dB(A) No Load Speed (Hi): 0 - 2,000 rpm No Load Speed (Lo): 0 - 500 rpm Torque Settings: 21 + drill Max. Fastening Torque (Soft Joint): 30 Nm Max. Fastening Torque (Hard Joint): 54 Nm Vibration K factor: 1.5 m/sec_ Vibration: Impact drilling into concrete: 8.0 m/sec_ Vibration: Drilling into metal: 2.5 m/sec_ Net weight: 1.8 kg

GBP 0.00
1

HP2050F 13mm Percussion Drill with Job Light 720W 240V

HP2050F 13mm Percussion Drill with Job Light 720W 240V

The Makita HP2050F 13mm Percussion Drill has an extra low vibration level, for comfortable and less fatigue operation. It is fitted with a torque limiter, the drill stops when the bit hits against reinforcements. It is equipped with a keyed drill chuck. The two mechanical gears and variable speed trigger makes it ideal for various materials. This model also has an LED job light. It is supplied with a side handle, depth stop and a carry case. Specification Input Power 720 Watt. No Load Speed 0-1,200/0-2,900/min. Impact Rate 0-24,000/0-58,000/bpm. Capacity Steel 13mm, Masonry 20mm, Wood 40mm. Weight 2.5kg. Vibration Drilling 2.5 m/sec. Vibration Hammer Drilling 13 m/sec. Vibration K Factor 3 m/sec. Noise Sound Power 108 dB(A).

GBP 0.00
1

Makita HS0600 270mm Circular Saw (110V)

Makita HS0600 270mm Circular Saw (110V)

Achieve smooth and efficient cutting results with this Makita Circular Saw The Makita HS0600 255mm -270mm Circular Saw cuts 4x material in a single pass. It has a large cutting and bevel capacity (76mm at 90 degrees and 53mm at 45 degrees), with precision gearing and ball and needle bearing construction for smooth and efficient power transmission. Convenience features include an adjustable top guide to align notches with line-of-cut for improved accuracy, and auxiliary front and top handles positioned for comfort and control. The blade wrench is attached to the saw for fast blade changing, with a flat motor housing design for added convenience. The large, conveniently-located adjustment knobs and levers are engineered for easier adjustments. The HS0600 has a magnesium die cast blade case and blade guard, and aluminium base for durability and less weight (8.25kg). Features: Lightweight for excellent manoeuvrability Durable but lightweight magnesium die-cast blade case and safety cover. Flat motor housing end Compatible with Guide Rail Ergonomic soft grip Aluminium base plate Rear angular guide for smooth and precise adjustment of bevel angle Fine parallel adjustment of the base plate to the saw blade Bevel angles 0 - 50 degrees Double Insulation Comes With: TCT saw blade Dust nozzle Rip fence (Guide rule) Hex wrench Specification: Depth of Cut @ 90: 101 mm Blade Diameter: 270 mm Depth of Cut @ 45: 71 mm Max Cut @ 50: 63 mm Bore Diameter: 30 mm Noise sound pressure: 94 dB(A) Noise sound power: 105 dB(A) Noise K factor: 3 dB(A) Input Wattage: 110v 1,650 w Input Wattage: 240v 2,100 w No Load Speed: 4300 rpm Vibration K factor: 1.5 m/sec Vibration: Cutting Wood: 2.5 m/sec Net weight: 8.25 kg

GBP 0.00
1

Makita HM0871C SDS Max Demolition Hammer with Avt (110V)

Makita HM0871C SDS Max Demolition Hammer with Avt (110V)

High durability and excellent demolition performance are achieved with this Makita SDS drill The Makita HM0871C has high durability and excellent demolition performance. Anti-vibration technology ensures extra-low vibration performance. Adapted for SDS-MAX bits. Features: AVT - Anti-Vibration System Electronic speed control for maximum productivity Long life carbon brushes with LED lamp for replacement warning One touch sliding chuck for easy bit installation and removal Soft start Double Insulation Electronic speed control Hammer only Variable speed trigger Comes with: Anti-Vibration system Hammer grease Carrying case Specification: Impact energy 8.1 J Blows per minute 1100-2650 bpm Input wattage 1100 w Vibration: Chiselling 8 m/sec_ Vibration K factor 1.5 m/sec_ Noise sound pressure 86 dB(A) Noise sound power 97 dB(A) Noise K factor 3 dB(A) Net weight 5.6 kg

GBP 0.00
1

Makita DHP486Z BL LXT Heavy-Duty Combi Drill 18V Bare Unit MAKDHP486Z

Makita DHP486Z BL LXT Heavy-Duty Combi Drill 18V Bare Unit MAKDHP486Z

Makita DHP486 Brushless LXT Heavy-Duty Combi Drill has an all-metal gear construction and metal gear housing for increased durability. Its brushless motor requires no maintece and is more efficient, increasing battery run time and performance. The variable speed trigger offers both forward and reverse rotation. It has a single sleeve, keyless chuck for easy bit installation/removal by one hand. Fitted with an ergonomic soft grip for increased comfort and control. Other features include an electric brake, LED job light and a belt clip. Specification Chuck 13mm No Load Speed 0-550/0-2,100/min. Impact Rate 0-8,250/0-31,500/bpm Max. Torque (Min./Max.) 65Nm/130Nm Torque Settings 21 + Drill Drill Capacity Concrete 16mm, Metal 13mm, Wood 76mm Screw Capacity Machine Screw 6mm, Wood Screw 10 x 90mm Weight 1.5kg The Makita DHP486Z BL LXT Heavy-Duty Combi Drill is supplied as a Bare Unit, NO battery or charger supplied.

GBP 0.00
1

Makita DLX3049PTJ 18/36V 3 Piece Cordless Kit (4 x 5.0Ah Batteries

Makita DLX3049PTJ 18/36V 3 Piece Cordless Kit (4 x 5.0Ah Batteries

This 3 piece tool kit from Makita contains a range of must-have tools for the professional trade The Makita DLX3049PTJ comes with the DHR264 Twin 18V SDS+ Rotary Hammer and the DHS710 Twin 18V Circular Saw which both accept 2 x 18V batteries making them a 36 volt cordless machine with bags and bags of power. The kit also comes with the DTD146 Impact Driver, Twin battery charger and 3 x MakPac carry cases. Contents:DHR264 twin 18V SDS+ Rotary HammerDHS710 twin 18V Circular SawDTD152 18V Impact DriverDC18RD Twin Port Battery Charger4 x BL1850 18V 5Ah Batteries2 x Type 4 MakPac Carry Cases1 x Type 3 MakPac Carry Case DHR 264 Features: Powered by two 18V Li-ion batteries in series to supply energy to the powerful 36V DC motor drive system. Compact design that maintains the same easy handling and high manoeuvrability as the BHR262. LED Job light with pre-glow and afterglow functions 3 mode operation - Rotation + Hammering - Hammering only - Rotation only When different capacity batteries are used together, (for example 3.0Ah BL1830 and 4.0Ah BL1840, or fully charged BL1830 and 70% charged BL1830), the machine stops when the battery with less capacity gets empty. With Quick Change Chuck Ergonomic soft grip. Battery capacity warning lamp. 40 different bit-angle settings. DHS710 Features: Powered by two 18V Li-ion batteries in series to supply energy to the powerful 36V DC motor drive system. Compact and lightweight design. Rear dust exhaust port Same depth of cut as HS7100. Durable but lightweight magnesium die-cast blade case and safety cover. Blower function to clear wood dust from cutting line. DTD152 Features: Electric brake Mechanical 2-speed control Variable speed control trigger Forward/reverse rotation Twin LED job light One touch bit installation Ergonomic soft grip handle Compact overall length of 137mm Lightweight design Battery protection circuit All metal gears Comes With: 4 x 5.0Ah Batteries DC18RD twin Charger 3 x Makpac Carry Cases DHR264 - Side Handle, Depth Stop, Extra Chuck 194079-2, 100ml Grease, Cloth DHS710 - Saw Blade, Hex Wrench, Rip Fence and Dust Nozzle Specification: DHR264 SDS+ Rotary Hammer: Battery type: Lithium ion Battery voltage: 2 x 18V Max. in steel: 13mm Max. in wood: 32mm Max in concrete: 26mm No load speed: 0-1,200 rpm Impacts per minute: 0-4,800bpm Chuck type: SDS plus (quick change) Operation modes: 3 modes Net weight: 4.7kg DHS710 Circular Saw: Battery type: Lithium ion Battery voltage: 2 x 18V Blade size: 190mm Bore size: 20mm Max at 0: 66mm Max at 45: 49mm Max at 50: 44mm No load speed: 4600rpm Electric brake: Yes Soft start: Yes Net weight: 4.7kg DTD152 Impact Driver: Battery Type Li-ion Voltage: 18V Driving Shank: 6.35mm (1/4 in Hex) Machine Screw: M4 - M8 Standard Bolt: M5 - M16 Coarse Thread: 22 - 125mm Impacts Per Minute: 0 - 3500 ipm No Load Speed Hi: 0 - 2900 rpm Max Tightening Torque 165 Nm Sound Pressure: 93 dB(A) Sound Power: 104 dB(A) Sound K Factor: 3 dB(A) Vibration: 10.5 m/s2 Vibration K Factor: 1.5 m/s2 Weight 1.5kg

GBP 0.00
1

DLX2140PTJ 18/36V Circular Saw & Combi Drill Twin Pack (4 x 5.0AH Batteries)

DLX2140PTJ 18/36V Circular Saw & Combi Drill Twin Pack (4 x 5.0AH Batteries)

This Makita twin pack offers the ultimate power output. Featuring the DHS710 36V circular saw and DHP482 18V combi drill The DLX2140PTJ is a great value Combo Kit consisting of the Makita DHS710 36V circular saw and DHP482 18V Combi Drill. The DHS710 is powered by 2 x 18V batteries giving the equivalent power of a 36-volt machine. It comes supplied with a 190mm carbide-tipped blade for wood (B-02939), hex wrench, rip fence and dust nozzle. The DHP482 compact combi drill with an overall length of only 198mm, although small it is packed with features like 21 different torque settings, hammer action and bright twin LED job lights for working in dark conditions. DHS710 Features: Powered by two 18V Li-ion batteries in series to supply energy to the powerful 36V DC motor drive system Compact and lightweight design Rear dust exhaust Same depth of cut as HS7100 corded machine Durable but lightweight magnesium die-cast blade case and safety cover Blower function to clear wood dust from cutting line DHP482 Features: Electric brake Mechanical 2-speed control Variable speed control trigger Forward/reverse rotation Twin LED job light Ergonomic soft grip handle Compact overall length of 198mm Single sleeve keyless chuck Lightweight design Battery protection circuit All metal gears Comes With: 4 x 5.0Ah BL1850 Batteries DC18RD Dual Port Charger 7.2 - 18V 821550-0 Connector Case (Type 2) 821551-8 Connector Case (Type 3) 821552-6 Connector Case (Type 4) Specification: DHS710: Battery Type: Lithium-ion Battery voltage: 2 x 18V Battery capacity: Up to 5Ah Blade size: 190mm Bore size: 20mm Max at 0: 66mm Max at 45: 49mm Max at 50: 44mm No load speed: 4600rpm Electric brake: Yes Soft start: Yes Net weight: 4.3kg DHP482: Battery Type Li-ion Voltage: 18V Max. in Masonry: 13mm Max. in Steel: 13mm Max. in Wood: 38mm Max. Fastening Torque: S/H 36/62 Nm Chuck Capacity: 1.5 - 13mm Torque Settings: 21 + Drill No Load Speed Hi: 0 - 1,900rpm Low: 0 - 600rpm Blows per Minute Hi: 0 - 28,500bpm Low: 0 - 9,000bpm Weight: 1.8kg

GBP 0.00
1

9558NBR 5 Inch/125mm Angle Grinder (110V)

9558NBR 5 Inch/125mm Angle Grinder (110V)

The Makita 9558NBR Angle Grinder is able to cut through masonry with its high power motor The 9558NBR is the successor to the proven 9558NB, the 'R' grinders have additional soft start and anti-restart functions. The high-performance motor provides enough power for masonry cutting but still has high heat resistance. It is armature coated with protective zigzag varnish and field coated with powder varnish to protect it from dust and wire breakage. The use of the type 55 motor allows the housing circumference to be smaller than the competitors. Features: Spindle lock High heat resistance Shaft lock for easy wheel changes Makita 9558NBR Angle Grinder 125mm Side switch position for easy thumb operation Small circumference barrel grip for easy handling Easier repairing of gear section, assembled with key Labyrinth construction protects all ball bearings from dust and debris Comes With: Spanner Side handle 125mm disc Wheel guard Specification: Bore Size: 22mm Net Weight: 1.6kg Wheel size: 125mm Input wattage: 840w Spindle size: M14x2mm No Load Speed: 11,000rpm

GBP 0.00
1

DHK180z 18V LXT SDS Plus Power Scraper (Body Only)

DHK180z 18V LXT SDS Plus Power Scraper (Body Only)

Makita DHK180Z 18V LXT SDS Plus Power Scraper (Body Only) The Makita DHK180 is a cordless SDS-PLUS power scraper powered by an 18V LXT Li-Ion battery (not included). With AVT to absorb vibration for user comfort. Fitted with a brushless motor which enables the machine to return 3200 blows per minute and generating 3.1 Joules of impact energy. Sold as a body only model in a cardboard box. Features: Brushless motor High power similar to AC Tool Variable speed trigger and dial Constant speed control LED job light Anti-vibration housing and AVT for reduced operator fatigue Slide lever for trigger lock-on/ lock-off 12 bit angle settings (every 30?) One-touch sliding chuck for easy bit changes Equipped with Battery protection circuit: designed to protect the battery from damages due to overdischarge, high temperature or overload current Specification: Blows per minute: 0 - 3200 bpm Vibration: Chiselling: 4.5 m/sec? Vibration K factor: 1.5 m/sec? Noise sound pressure: 83 dB(A) Noise K factor: 3 dB(A) Battery Type: Lithium-ion Body only machine Voltage: 18V Impact energy: 3.1 J Shank: SDS-PLUS Net weight: 3.3 3.6 kg

GBP 0.00
1

Makita DHP482Z 18V LXT Combi Drill (Body Only)

Makita DHP482Z 18V LXT Combi Drill (Body Only)

Though small and compact, this cordless combi drill has 21 torque settings, metal gears and loads more quality features The Makita DHP482 is a compact Combi Drill with an overall length of only 198mm. Although small it is packed with features like 21 different torque settings, hammer action and bright twin LED job lights for working in dark conditions. It also has an all-metal gearbox for long life and a soft-grip handle designed to maximise thrust right to the bit. Sold without battery or charger in a cardboard carton. Features: Electric brake Mechanical 2-speed control Variable speed control trigger Forward/reverse rotation Twin LED job light Ergonomic soft grip handle Compact overall length of 198mm Single sleeve keyless chuck Lightweight design Battery protection circuit All metal gears Comes With: Belt Clip Double ended screwdriver bit Specification: Battery Type: Li-ion Voltage: 18V Max. in Masonry: 13mm Max. in Steel: 13mm Max. in Wood: 38mm Max. Fastening Torque: S/H 36/62 Nm Chuck Capacity: 1.5 - 13mm Torque Settings: 21 + Drill No Load Speed Hi: 0 - 1, 900rpm Low: 0 - 600rpm Blows per Minute Hi: 0 - 28, 500bpm Low: 0 - 9, 000bpm Weight: 1.8kg

GBP 0.00
1

Makita HR4013C SDS Max Rotary Hammer with Avt 110V

Makita HR4013C SDS Max Rotary Hammer with Avt 110V

Makita HR4013C Rotary Hammer with SDS max and AVT, complete with carrying case, bit grease, depth rod and side handleThe Makita HR4013C was developed to provide higher operating efficiency and more comfort with unrivalled low level of vibration. Compared to the previous model HR4011C this machine gives 20% higher drilling efficiency and 45% higher chipping efficiency. With Rotary Hammer 4.5m/sec_ and Hammer 5.0m/sec_ vibration levels it makes this the worlds first 8 hour SDS-MAX rotary hammer.Features:One touch sliding chuck for easy bit installation and removalEasy to operate operation-mode change lever. Located on the top of the motor housing for reduced possibility of breakage"Soft no load" function automatically reduces the motor speed during idling to suppress the vibration of the machine bodyUnrivalled low level of vibration aided by vibration absorbing housingLED service light indicates when to replace carbon brushIn hammering mode, on/off switch is switchable between two switches to meet your application: For Continous or Intermittent chiseling applicationsComes with:Heavy duty carrying caseSide handleDepth stopGrease tubeClothSpecification:Impact energy: 8.0 JMax in concrete: 40 mmNo Load Speed: 250 - 500 rpmVibration - Chiselling: 4.5 m/sec_Vibration - Hammer Drilling: 5 m/sec_Vibration K factor: 1.5 m/sec_Impacts per minute: 1450 - 2900 ipmInput Wattage: 1000 wNet weight with pipes: 6.8 kg

GBP 0.00
1

Makita DTM51Z 18V LXT Multi Tool Tool-Less (Body Only)

Makita DTM51Z 18V LXT Multi Tool Tool-Less (Body Only)

This cordless Makita multi tool will cut through most materials with ease With up to 20, 000 oscillations per minute, the DTM51 from Makita has a high operational efficiency which enables it to cut through most materials with ease. With a multi-angle setting that spans a full 360 degrees in 30-degree increments, this versatile multi-tool will cut plasterboard, wood, metal and ceramic tiles and can flush cut nails and metal pipework. Sold as a Body Only machine without a battery or charger in a cardboard box. Features: Tool-less accessory clamp for quick installation and replacement 12 angle setting of accessories at every 30 from 0 - 360 Variable speed control by dial Soft start The ergonomic barrel grip is a perfect size and shape for extra comfort High operating efficiency Battery capacity warning lamp Blinking red; Battery power has been nearly used up. Solid red; Battery power has been used up (Battery protector will shut off the power.) Anti-restart function prevents accidental start-up Accepts Makita, Bosch & Fein accessories Specification: Voltage: 18V Oscillations per minute: 6, 000-20, 000rpm Oscillation: 3.2 Overall dimensions: 324mm Vibration K factor: 1.5 m/sec_ Vibration: Sanding: 3.0 m/sec_ Vibration: Scraping: 5.5 m/sec_ Vibration: Plunge Saw Blade: 7.0 m/sec_ Vibration: Segmential Saw Blade: 4.5 m/sec_ Net weight: 1.9kg

GBP 0.00
1