145 results (0,22561 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

2x Indexa 12MMx1500MM Stainless Steel Round BAR1.4305/303 (1 Pce)

2x Indexa 12MMx1500MM Stainless Steel Round BAR1.4305/303 (1 Pce)

These bars are made from what is popularly known as grade 303 stainless steel, the most readily machinable of all the austenitic grades, due to the presence of sulphur. These highly versatile bars also have excellent resistance to corrosion and therefore have a long lifespan. Features and Benefits Made from 303 stainless steel Versatile bars High resistance to corrosion Typical Applications Used in applications that require parts to be heavily machined, including nuts and bolts, screws, gears, aircraft fittings, bushings & shafts.

GBP 73.98
1

2x Indexa 30MMx5MMx2000MM St/Steelflat Bar 1.4307/304L (1 Pce)

2x Indexa 30MMx5MMx2000MM St/Steelflat Bar 1.4307/304L (1 Pce)

These bars are made from the most widely used stainless steel, with a nominal composition of 18% chromium and 8% nickel. They are highly versatile, being ideal in a wide variety of industries and environments. The bars have excellent corrosion resistance, head resistance, machinability and readily work harden. Features and Benefits Made from the most popular stainless steel Versatile, widely applicable bars Good resistance to corrosion and heat Work harden Typical Applications Sinks Saucepans Cutlery and flatware Architectural panelling Tubing Food and pharmaceutical production equipment Springs, nuts, bolts and screws

GBP 65.98
1

2x Indexa 25MMx6MMx2000MM St/Steelflat Bar 1.4307/304L (1 Pce)

2x Indexa 25MMx6MMx2000MM St/Steelflat Bar 1.4307/304L (1 Pce)

Manufactured from type 1.4307/304L stainless steel, these flat bars are ideal for machining into smaller components. The product is available in a variety of metric sizes to suit your needs, all measuring 2000mm in length. Features and Benefits The most widely used stainless steel with a nominal composition of 18% chromium and 8% nickel for maximum heat resistance and machinability Material is corrosion resistant for overall product longevity Available in a range of sizes to suit your exact needs Saves time and material wastage as instead of machining down from a large block, the bars are smaller and pre-cut Typical Applications Typically used in sinks and splashbacks, saucepans, cutlery and flatware, architectural panelling, sanitaryware and troughs, tubing, brewery, dairy, food and pharmaceutical production equipment, springs, nuts, bolts and screws

GBP 59.98
1

4x Indexa 1" x 1/8" x 24" Copper Flat Bar CW004A/C101 (1 Piece)

4x Indexa 1" x 1/8" x 24" Copper Flat Bar CW004A/C101 (1 Piece)

These copper bars are manufactured from CW004A/C101, the most widely used copper thanks to its thermal and electrical conductivity as well as its longevity. Available in two imperial sizes, the bars are 1 metre in length and are ready to weld. Features and Benefits The most widely used of all the coppers because of its combination of electrical and thermal conductivity, corrosion resistance, workability and aesthetic beauty. The normal grade for general electrical use as busbar, motor and transformer components, windings and many other current carrying applications Available in two thicknesses, both 1 metre in length Avoids material wastage as you can select the thickness that best suits your needs Typical Applications Used in motors, contacts, terminals and many other current carrying applications Other uses include architectural metalwork, gutters, flashing, roofing, automotive and industrial radiators, chemical process equipment, vats, kettles and pans

GBP 53.56
1

5x Indexa 8MMx500MM Brass Hexagon BARCW614N/CZ121 (1 Pce)

5x Indexa 8MMx500MM Brass Hexagon BARCW614N/CZ121 (1 Pce)

Manufactured from CW614N/CZ121 specification brass alloy, these hexagonal bars are ideal for making intricate and useful engineering components. This type of brass is the most widely used of all the brasses due to its suitability for high speed machining operations. Suited for hot formability as opposed to cold working, the product can be purchased in a range of diameters, all with a 500mm length.Features and Benefits Hexagonal shape helps you to reduce material wastage, saving you from milling the material down from a larger amount of brass The bars possess the highest machinability of any copper alloy Excellent hot formability for accurate results Good corrosion resistance for all around quality of performance and longevity Available in a variety of sizes and specifications, all 500mm in length to suit your exact requirementsTypical Applications Generally used for wide variety of machined components made on high speed lathes including screws, bolts, nuts, bushing, pins, washers, butts, hinges and also locks and components for watches

GBP 49.95
1

5x Indexa 15MMx500MM Brass HEXAGONBARCW614N/CZ121 (1 Pce)

5x Indexa 15MMx500MM Brass HEXAGONBARCW614N/CZ121 (1 Pce)

Manufactured from CW614N/CZ121 specification brass alloy, these hexagonal bars are ideal for making intricate and useful engineering components. This type of brass is the most widely used of all the brasses due to its suitability for high speed machining operations. Suited for hot formability as opposed to cold working, the product can be purchased in a range of diameters, all with a 500mm length.Features and Benefits Hexagonal shape helps you to reduce material wastage, saving you from milling the material down from a larger amount of brass The bars possess the highest machinability of any copper alloy Excellent hot formability for accurate results Good corrosion resistance for all around quality of performance and longevity Available in a variety of sizes and specifications, all 500mm in length to suit your exact requirementsTypical Applications Generally used for wide variety of machined components made on high speed lathes including screws, bolts, nuts, bushing, pins, washers, butts, hinges and also locks and components for watches

GBP 84.95
1

4x Indexa 25mm x 3mm x 1m Copper Flat Bar CW004A/C101 (1 Piece)

4x Indexa 25mm x 3mm x 1m Copper Flat Bar CW004A/C101 (1 Piece)

Manufactured from CW004A/C101 grade copper, these flat bars are ideal for constructing a variety of components, tools and appliances. Each bar is constructed from the normal grade of copper for general electrical use as busbar, motor and transformer components, windings and many other current carrying applications. Both bars are a metre and vary only in their thickness to suit your needs. Features and Benefits The most widely used of all the coppers because of its combination of electrical and thermal conductivity, corrosion resistance, workability and aesthetic beauty The normal grade for general electrical use as busbar, motor and transformer components, windings and many other current carrying applications Corrosion resistant for overall product longevity Electrical and thermal conductivity Available in two thicknesses to suit your needs Avoids material wastage Typical Applications Used in motors, contacts, terminals and many other current carrying applications Other uses include architectural metalwork, gutters, flashing, roofing, automotive and industrial radiators, chemical process equipment, vats, kettles and pans

GBP 53.56
1

2x Indexa 14MMx1500MM Stainless Steel Round BAR1.4404/316 (1 Pce)

2x Indexa 14MMx1500MM Stainless Steel Round BAR1.4404/316 (1 Pce)

Manufactured from type 1.4404/316L stainless steel, these round bars are designed for making into key components and tools for your desired industry. Features and Benefits Contains an addition of molybdenum that gives it improved corrosion resistance Suited to use in heavy gauge (over about 6mm) welded components Excellent toughness, even at cryogenic temperatures Available in a range of sizes to suit your needs Avoids material wastage Typical Applications Typically used in food processing equipment, brewery equipment, chemical and petrochemical equipment, laboratory benches & equipment, coastal architectural panelling, coastal balustrading, boat fittings, chemical transportation containers, heat exchangers, mining screens, nuts and bolts, springs & medical implants

GBP 53.98
1

Indexa 16MMx1500MM Stainless Steel Round BAR1.4404/316 (1 Pce)

Indexa 16MMx1500MM Stainless Steel Round BAR1.4404/316 (1 Pce)

Manufactured from type 1.4404/316L stainless steel, these round bars are designed for making into key components and tools for your desired industry. Features and Benefits Contains an addition of molybdenum that gives it improved corrosion resistance Suited to use in heavy gauge (over about 6mm) welded components Excellent toughness, even at cryogenic temperatures Available in a range of sizes to suit your needs Avoids material wastage Typical Applications Typically used in food processing equipment, brewery equipment, chemical and petrochemical equipment, laboratory benches & equipment, coastal architectural panelling, coastal balustrading, boat fittings, chemical transportation containers, heat exchangers, mining screens, nuts and bolts, springs & medical implants

GBP 49.99
1

2x Indexa 20MMx5MMx2000MM St/Steelflat Bar 1.4404/316L (1 Pce)

2x Indexa 20MMx5MMx2000MM St/Steelflat Bar 1.4404/316L (1 Pce)

Manufactured from type 1.4404/316L stainless steel, these flat bars are ideal for milling and cutting down to make various components. Features and Benefits Contains an addition of molybdenum that gives it improved corrosion resistance Suited to use in heavy gauge (over about 6mm) welded components Excellent toughness, even at cryogenic temperatures Available in a range of metric sizes to suit your needs Reduces material wastage as it saves you milling and cutting down from a much larger block of material Typical Applications Typically used in food processing equipment, brewery equipment, chemical and petrochemical equipment, laboratory benches & equipment, coastal architectural panelling, coastal balustrading, boat fittings, chemical transportation containers, heat exchangers, mining screens, nuts and bolts, springs & medical implants

GBP 43.98
1

2x Indexa 14MMx1500MM Stainless Steel Round BAR1.4305/303 (1 Pce)

2x Indexa 14MMx1500MM Stainless Steel Round BAR1.4305/303 (1 Pce)

Constructed from solid Type 1.4305 (popularly known as grade 303) stainless steel, these bars are ideal for crafting machined pieces. The material is the most readily machinable of all the austenitic grades due to the presence of sulphur, making for accurate and neat machined parts. Available in a variety of diameters, all with a length of 1500mm. Features and Benefits Manufactured from type 1.4305 or 303 Stainless Steel for durability and optimum machinability Available in a range of sizes to suit your exact needs, all measuring 1500mm in length Saves material wastage as well as your time, as there's no need to mill the product down from a larger block Typical Applications Used in applications that require parts to be heavily machined, including nuts and bolts, screws, gears, aircraft fittings, bushings and shafts

GBP 53.98
1

Indexa 25mm x 25mm x 1000mm Ground Flat Stock

Indexa 25mm x 25mm x 1000mm Ground Flat Stock

Precision ground flat stock supplied as W1.2510 - 01 Tool Steel (100MnCrW1), in a wide range of Metric sizes. Oil hardening gauge plate supplied in annealed condition. It offers good durability, gives excellent wear resistance and holds a good cutting edge. An excellent general purpose grade. Applications include medium run dies, press tools, drawing punches, broaches, bushings, lathe centres, chuck jaws, master cavity sinking hobs, paper cutting machine knives, plug gauges, thread gauges and precision measuring tools. It is also used in applications such as cams, cloth cutters, cold taps, reamers, trimmer dies, tube expander rolls, plastic moulds and woodworking cutters, collets, cutting hobs and strip slitting cutters. Top & bottom surfaces supplied in ground condition. Both ends supplied sawn cut. Inch - Preferred Size List Generally available from stock. All sizes listed are 18" long. Tolerances Thickness: -0/+.002" Width: -0/+.008" Length: -0/+.197" Square Bars: -0/+.002" Material Specification DIN Grade..1.2510 (100MnCrW1) Nearest AISI Standard 01 Hardness 230 HB Surface Roughness max. 3.2m Chemical Composition C Carbon 0.90 - 1.05% Si Silicon .............. 0.15 - 0.35% Mn Manganese 1.00 - 1.20% Cr Chromium . 0.50 - 0.70% V Vanadium 0.05 - 0.15% W Tungsten 0.50 - 0.70% P Phosphorous max. 0.035% S Sulphur max. 0.035% Inch - Preferred Size List Generally available from stock. All sizes listed are 18" long.

GBP 79.99
1

Indexa 1.5mm x 200mm x 500mm Ground Flat Stock

Indexa 1.5mm x 200mm x 500mm Ground Flat Stock

Precision ground flat stock supplied as W1.2510 - 01 Tool Steel (100MnCrW1), in a wide range of Metric sizes. Oil hardening gauge plate supplied in annealed condition. It offers good durability, gives excellent wear resistance and holds a good cutting edge. An excellent general purpose grade. Applications include medium run dies, press tools, drawing punches, broaches, bushings, lathe centres, chuck jaws, master cavity sinking hobs, paper cutting machine knives, plug gauges, thread gauges and precision measuring tools. It is also used in applications such as cams, cloth cutters, cold taps, reamers, trimmer dies, tube expander rolls, plastic moulds and woodworking cutters, collets, cutting hobs and strip slitting cutters. Top & bottom surfaces supplied in ground condition. Both ends supplied sawn cut. Inch - Preferred Size List Generally available from stock. All sizes listed are 18" long. Tolerances Thickness: -0/+.002" Width: -0/+.008" Length: -0/+.197" Square Bars: -0/+.002" Material Specification DIN Grade..1.2510 (100MnCrW1) Nearest AISI Standard 01 Hardness 230 HB Surface Roughness max. 3.2m Chemical Composition C Carbon 0.90 - 1.05% Si Silicon .............. 0.15 - 0.35% Mn Manganese 1.00 - 1.20% Cr Chromium . 0.50 - 0.70% V Vanadium 0.05 - 0.15% W Tungsten 0.50 - 0.70% P Phosphorous max. 0.035% S Sulphur max. 0.035% Inch - Preferred Size List Generally available from stock. All sizes listed are 18" long.

GBP 59.99
1

Indexa 4mm x 250mm x 500mm Ground Flat Stock

Indexa 4mm x 250mm x 500mm Ground Flat Stock

Precision ground flat stock supplied as W1.2510 - 01 Tool Steel (100MnCrW1), in a wide range of Metric sizes. Oil hardening gauge plate supplied in annealed condition. It offers good durability, gives excellent wear resistance and holds a good cutting edge. An excellent general purpose grade. Applications include medium run dies, press tools, drawing punches, broaches, bushings, lathe centres, chuck jaws, master cavity sinking hobs, paper cutting machine knives, plug gauges, thread gauges and precision measuring tools. It is also used in applications such as cams, cloth cutters, cold taps, reamers, trimmer dies, tube expander rolls, plastic moulds and woodworking cutters, collets, cutting hobs and strip slitting cutters. Top & bottom surfaces supplied in ground condition. Both ends supplied sawn cut. Inch - Preferred Size List Generally available from stock. All sizes listed are 18" long. Tolerances Thickness: -0/+.002" Width: -0/+.008" Length: -0/+.197" Square Bars: -0/+.002" Material Specification DIN Grade..1.2510 (100MnCrW1) Nearest AISI Standard 01 Hardness 230 HB Surface Roughness max. 3.2m Chemical Composition C Carbon 0.90 - 1.05% Si Silicon .............. 0.15 - 0.35% Mn Manganese 1.00 - 1.20% Cr Chromium . 0.50 - 0.70% V Vanadium 0.05 - 0.15% W Tungsten 0.50 - 0.70% P Phosphorous max. 0.035% S Sulphur max. 0.035% Inch - Preferred Size List Generally available from stock. All sizes listed are 18" long.

GBP 63.99
1

Indexa 1mmx100mmx1000mm Ground Flat Stock

Indexa 1mmx100mmx1000mm Ground Flat Stock

Precision ground flat stock supplied as W1.2510 - 01 Tool Steel (100MnCrW1), in a wide range of Metric sizes. Oil hardening gauge plate supplied in annealed condition. It offers good durability, gives excellent wear resistance and holds a good cutting edge. An excellent general purpose grade. Applications include medium run dies, press tools, drawing punches, broaches, bushings, lathe centres, chuck jaws, master cavity sinking hobs, paper cutting machine knives, plug gauges, thread gauges and precision measuring tools. It is also used in applications such as cams, cloth cutters, cold taps, reamers, trimmer dies, tube expander rolls, plastic moulds and woodworking cutters, collets, cutting hobs and strip slitting cutters. Top & bottom surfaces supplied in ground condition. Both ends supplied sawn cut. Inch - Preferred Size List Generally available from stock. All sizes listed are 18" long. Tolerances Thickness: -0/+.002" Width: -0/+.008" Length: -0/+.197" Square Bars: -0/+.002" Material Specification DIN Grade..1.2510 (100MnCrW1) Nearest AISI Standard 01 Hardness 230 HB Surface Roughness max. 3.2m Chemical Composition C Carbon 0.90 - 1.05% Si Silicon .............. 0.15 - 0.35% Mn Manganese 1.00 - 1.20% Cr Chromium . 0.50 - 0.70% V Vanadium 0.05 - 0.15% W Tungsten 0.50 - 0.70% P Phosphorous max. 0.035% S Sulphur max. 0.035% Inch - Preferred Size List Generally available from stock. All sizes listed are 18" long.

GBP 69.99
1

Indexa 1/16"x5"x18" Ground Flatstock

Indexa 1/16"x5"x18" Ground Flatstock

Precision ground flat stock supplied as W1.2510 - 01 Tool Steel (100MnCrW1), in a wide range of Metric sizes. Oil hardening gauge plate supplied in annealed condition. It offers good durability, gives excellent wear resistance and holds a good cutting edge. An excellent general purpose grade. Applications include medium run dies, press tools, drawing punches, broaches, bushings, lathe centres, chuck jaws, master cavity sinking hobs, paper cutting machine knives, plug gauges, thread gauges and precision measuring tools. It is also used in applications such as cams, cloth cutters, cold taps, reamers, trimmer dies, tube expander rolls, plastic moulds and woodworking cutters, collets, cutting hobs and strip slitting cutters. Top & bottom surfaces supplied in ground condition. Both ends supplied sawn cut. Inch - Preferred Size List Generally available from stock. All sizes listed are 18" long. Tolerances Thickness: -0/+.002" Width: -0/+.008" Length: -0/+.197" Square Bars: -0/+.002" Material Specification DIN Grade..1.2510 (100MnCrW1) Nearest AISI Standard 01 Hardness 230 HB Surface Roughness max. 3.2m Chemical Composition C Carbon 0.90 - 1.05% Si Silicon .............. 0.15 - 0.35% Mn Manganese 1.00 - 1.20% Cr Chromium . 0.50 - 0.70% V Vanadium 0.05 - 0.15% W Tungsten 0.50 - 0.70% P Phosphorous max. 0.035% S Sulphur max. 0.035% Inch - Preferred Size List Generally available from stock. All sizes listed are 18" long.

GBP 46.99
1

Indexa 5/8" x 2" x 36" Ground Flat Stock

Indexa 5/8" x 2" x 36" Ground Flat Stock

Precision ground flat stock supplied as W1.2510 - 01 Tool Steel (100MnCrW1), in a wide range of Metric sizes. Oil hardening gauge plate supplied in annealed condition. It offers good durability, gives excellent wear resistance and holds a good cutting edge. An excellent general purpose grade. Applications include medium run dies, press tools, drawing punches, broaches, bushings, lathe centres, chuck jaws, master cavity sinking hobs, paper cutting machine knives, plug gauges, thread gauges and precision measuring tools. It is also used in applications such as cams, cloth cutters, cold taps, reamers, trimmer dies, tube expander rolls, plastic moulds and woodworking cutters, collets, cutting hobs and strip slitting cutters. Top & bottom surfaces supplied in ground condition. Both ends supplied sawn cut. Inch - Preferred Size List Generally available from stock. All sizes listed are 18" long. Tolerances Thickness: -0/+.002" Width: -0/+.008" Length: -0/+.197" Square Bars: -0/+.002" Material Specification DIN Grade..1.2510 (100MnCrW1) Nearest AISI Standard 01 Hardness 230 HB Surface Roughness max. 3.2m Chemical Composition C Carbon 0.90 - 1.05% Si Silicon .............. 0.15 - 0.35% Mn Manganese 1.00 - 1.20% Cr Chromium . 0.50 - 0.70% V Vanadium 0.05 - 0.15% W Tungsten 0.50 - 0.70% P Phosphorous max. 0.035% S Sulphur max. 0.035% Inch - Preferred Size List Generally available from stock. All sizes listed are 18" long.

GBP 73.99
1

Indexa 1/8" x 10" x 18" Ground Flat Stock

Indexa 1/8" x 10" x 18" Ground Flat Stock

Precision ground flat stock supplied as W1.2510 - 01 Tool Steel (100MnCrW1), in a wide range of Metric sizes. Oil hardening gauge plate supplied in annealed condition. It offers good durability, gives excellent wear resistance and holds a good cutting edge. An excellent general purpose grade. Applications include medium run dies, press tools, drawing punches, broaches, bushings, lathe centres, chuck jaws, master cavity sinking hobs, paper cutting machine knives, plug gauges, thread gauges and precision measuring tools. It is also used in applications such as cams, cloth cutters, cold taps, reamers, trimmer dies, tube expander rolls, plastic moulds and woodworking cutters, collets, cutting hobs and strip slitting cutters. Top & bottom surfaces supplied in ground condition. Both ends supplied sawn cut. Inch - Preferred Size List Generally available from stock. All sizes listed are 18" long. Tolerances Thickness: -0/+.002" Width: -0/+.008" Length: -0/+.197" Square Bars: -0/+.002" Material Specification DIN Grade..1.2510 (100MnCrW1) Nearest AISI Standard 01 Hardness 230 HB Surface Roughness max. 3.2m Chemical Composition C Carbon 0.90 - 1.05% Si Silicon .............. 0.15 - 0.35% Mn Manganese 1.00 - 1.20% Cr Chromium . 0.50 - 0.70% V Vanadium 0.05 - 0.15% W Tungsten 0.50 - 0.70% P Phosphorous max. 0.035% S Sulphur max. 0.035% Inch - Preferred Size List Generally available from stock. All sizes listed are 18" long.

GBP 62.99
1

Indexa 1/2" x 4" x 18" Ground Flat Stock

Indexa 1/2" x 4" x 18" Ground Flat Stock

Precision ground flat stock supplied as W1.2510 - 01 Tool Steel (100MnCrW1), in a wide range of Metric sizes. Oil hardening gauge plate supplied in annealed condition. It offers good durability, gives excellent wear resistance and holds a good cutting edge. An excellent general purpose grade. Applications include medium run dies, press tools, drawing punches, broaches, bushings, lathe centres, chuck jaws, master cavity sinking hobs, paper cutting machine knives, plug gauges, thread gauges and precision measuring tools. It is also used in applications such as cams, cloth cutters, cold taps, reamers, trimmer dies, tube expander rolls, plastic moulds and woodworking cutters, collets, cutting hobs and strip slitting cutters. Top & bottom surfaces supplied in ground condition. Both ends supplied sawn cut. Inch - Preferred Size List Generally available from stock. All sizes listed are 18" long. Tolerances Thickness: -0/+.002" Width: -0/+.008" Length: -0/+.197" Square Bars: -0/+.002" Material Specification DIN Grade..1.2510 (100MnCrW1) Nearest AISI Standard 01 Hardness 230 HB Surface Roughness max. 3.2m Chemical Composition C Carbon 0.90 - 1.05% Si Silicon .............. 0.15 - 0.35% Mn Manganese 1.00 - 1.20% Cr Chromium . 0.50 - 0.70% V Vanadium 0.05 - 0.15% W Tungsten 0.50 - 0.70% P Phosphorous max. 0.035% S Sulphur max. 0.035% Inch - Preferred Size List Generally available from stock. All sizes listed are 18" long.

GBP 49.99
1

Indexa 1/32"x6"x18" Ground Flatstock

Indexa 1/32"x6"x18" Ground Flatstock

Precision ground flat stock supplied as W1.2510 - 01 Tool Steel (100MnCrW1), in a wide range of Metric sizes. Oil hardening gauge plate supplied in annealed condition. It offers good durability, gives excellent wear resistance and holds a good cutting edge. An excellent general purpose grade. Applications include medium run dies, press tools, drawing punches, broaches, bushings, lathe centres, chuck jaws, master cavity sinking hobs, paper cutting machine knives, plug gauges, thread gauges and precision measuring tools. It is also used in applications such as cams, cloth cutters, cold taps, reamers, trimmer dies, tube expander rolls, plastic moulds and woodworking cutters, collets, cutting hobs and strip slitting cutters. Top & bottom surfaces supplied in ground condition. Both ends supplied sawn cut. Inch - Preferred Size List Generally available from stock. All sizes listed are 18" long. Tolerances Thickness: -0/+.002" Width: -0/+.008" Length: -0/+.197" Square Bars: -0/+.002" Material Specification DIN Grade..1.2510 (100MnCrW1) Nearest AISI Standard 01 Hardness 230 HB Surface Roughness max. 3.2m Chemical Composition C Carbon 0.90 - 1.05% Si Silicon .............. 0.15 - 0.35% Mn Manganese 1.00 - 1.20% Cr Chromium . 0.50 - 0.70% V Vanadium 0.05 - 0.15% W Tungsten 0.50 - 0.70% P Phosphorous max. 0.035% S Sulphur max. 0.035% Inch - Preferred Size List Generally available from stock. All sizes listed are 18" long.

GBP 56.99
1

Indexa 5/8"x1.1/2"x36" Ground Flat Stock

Indexa 5/8"x1.1/2"x36" Ground Flat Stock

Precision ground flat stock supplied as W1.2510 - 01 Tool Steel (100MnCrW1), in a wide range of Metric sizes. Oil hardening gauge plate supplied in annealed condition. It offers good durability, gives excellent wear resistance and holds a good cutting edge. An excellent general purpose grade. Applications include medium run dies, press tools, drawing punches, broaches, bushings, lathe centres, chuck jaws, master cavity sinking hobs, paper cutting machine knives, plug gauges, thread gauges and precision measuring tools. It is also used in applications such as cams, cloth cutters, cold taps, reamers, trimmer dies, tube expander rolls, plastic moulds and woodworking cutters, collets, cutting hobs and strip slitting cutters. Top & bottom surfaces supplied in ground condition. Both ends supplied sawn cut. Inch - Preferred Size List Generally available from stock. All sizes listed are 18" long. Tolerances Thickness: -0/+.002" Width: -0/+.008" Length: -0/+.197" Square Bars: -0/+.002" Material Specification DIN Grade..1.2510 (100MnCrW1) Nearest AISI Standard 01 Hardness 230 HB Surface Roughness max. 3.2m Chemical Composition C Carbon 0.90 - 1.05% Si Silicon .............. 0.15 - 0.35% Mn Manganese 1.00 - 1.20% Cr Chromium . 0.50 - 0.70% V Vanadium 0.05 - 0.15% W Tungsten 0.50 - 0.70% P Phosphorous max. 0.035% S Sulphur max. 0.035% Inch - Preferred Size List Generally available from stock. All sizes listed are 18" long.

GBP 59.99
1

Indexa 5/8" x 4" x 18" Ground Flat Stock

Indexa 5/8" x 4" x 18" Ground Flat Stock

Precision ground flat stock supplied as W1.2510 - 01 Tool Steel (100MnCrW1), in a wide range of Metric sizes. Oil hardening gauge plate supplied in annealed condition. It offers good durability, gives excellent wear resistance and holds a good cutting edge. An excellent general purpose grade. Applications include medium run dies, press tools, drawing punches, broaches, bushings, lathe centres, chuck jaws, master cavity sinking hobs, paper cutting machine knives, plug gauges, thread gauges and precision measuring tools. It is also used in applications such as cams, cloth cutters, cold taps, reamers, trimmer dies, tube expander rolls, plastic moulds and woodworking cutters, collets, cutting hobs and strip slitting cutters. Top & bottom surfaces supplied in ground condition. Both ends supplied sawn cut. Inch - Preferred Size List Generally available from stock. All sizes listed are 18" long. Tolerances Thickness: -0/+.002" Width: -0/+.008" Length: -0/+.197" Square Bars: -0/+.002" Material Specification DIN Grade..1.2510 (100MnCrW1) Nearest AISI Standard 01 Hardness 230 HB Surface Roughness max. 3.2m Chemical Composition C Carbon 0.90 - 1.05% Si Silicon .............. 0.15 - 0.35% Mn Manganese 1.00 - 1.20% Cr Chromium . 0.50 - 0.70% V Vanadium 0.05 - 0.15% W Tungsten 0.50 - 0.70% P Phosphorous max. 0.035% S Sulphur max. 0.035% Inch - Preferred Size List Generally available from stock. All sizes listed are 18" long.

GBP 54.99
1

Indexa 3/4" x 1.1/2" x 36" Ground Flat Stock

Indexa 3/4" x 1.1/2" x 36" Ground Flat Stock

Precision ground flat stock supplied as W1.2510 - 01 Tool Steel (100MnCrW1), in a wide range of Metric sizes. Oil hardening gauge plate supplied in annealed condition. It offers good durability, gives excellent wear resistance and holds a good cutting edge. An excellent general purpose grade. Applications include medium run dies, press tools, drawing punches, broaches, bushings, lathe centres, chuck jaws, master cavity sinking hobs, paper cutting machine knives, plug gauges, thread gauges and precision measuring tools. It is also used in applications such as cams, cloth cutters, cold taps, reamers, trimmer dies, tube expander rolls, plastic moulds and woodworking cutters, collets, cutting hobs and strip slitting cutters. Top & bottom surfaces supplied in ground condition. Both ends supplied sawn cut. Inch - Preferred Size List Generally available from stock. All sizes listed are 18" long. Tolerances Thickness: -0/+.002" Width: -0/+.008" Length: -0/+.197" Square Bars: -0/+.002" Material Specification DIN Grade..1.2510 (100MnCrW1) Nearest AISI Standard 01 Hardness 230 HB Surface Roughness max. 3.2m Chemical Composition C Carbon 0.90 - 1.05% Si Silicon .............. 0.15 - 0.35% Mn Manganese 1.00 - 1.20% Cr Chromium . 0.50 - 0.70% V Vanadium 0.05 - 0.15% W Tungsten 0.50 - 0.70% P Phosphorous max. 0.035% S Sulphur max. 0.035% Inch - Preferred Size List Generally available from stock. All sizes listed are 18" long.

GBP 59.99
1

Indexa 5/16" x 6" x 18" Ground Flat Stock

Indexa 5/16" x 6" x 18" Ground Flat Stock

Precision ground flat stock supplied as W1.2510 - 01 Tool Steel (100MnCrW1), in a wide range of Metric sizes. Oil hardening gauge plate supplied in annealed condition. It offers good durability, gives excellent wear resistance and holds a good cutting edge. An excellent general purpose grade. Applications include medium run dies, press tools, drawing punches, broaches, bushings, lathe centres, chuck jaws, master cavity sinking hobs, paper cutting machine knives, plug gauges, thread gauges and precision measuring tools. It is also used in applications such as cams, cloth cutters, cold taps, reamers, trimmer dies, tube expander rolls, plastic moulds and woodworking cutters, collets, cutting hobs and strip slitting cutters. Top & bottom surfaces supplied in ground condition. Both ends supplied sawn cut. Inch - Preferred Size List Generally available from stock. All sizes listed are 18" long. Tolerances Thickness: -0/+.002" Width: -0/+.008" Length: -0/+.197" Square Bars: -0/+.002" Material Specification DIN Grade..1.2510 (100MnCrW1) Nearest AISI Standard 01 Hardness 230 HB Surface Roughness max. 3.2m Chemical Composition C Carbon 0.90 - 1.05% Si Silicon .............. 0.15 - 0.35% Mn Manganese 1.00 - 1.20% Cr Chromium . 0.50 - 0.70% V Vanadium 0.05 - 0.15% W Tungsten 0.50 - 0.70% P Phosphorous max. 0.035% S Sulphur max. 0.035% Inch - Preferred Size List Generally available from stock. All sizes listed are 18" long.

GBP 59.99
1

Indexa 1/32"x8"x18" Ground Flatstock

Indexa 1/32"x8"x18" Ground Flatstock

Precision ground flat stock supplied as W1.2510 - 01 Tool Steel (100MnCrW1), in a wide range of Metric sizes. Oil hardening gauge plate supplied in annealed condition. It offers good durability, gives excellent wear resistance and holds a good cutting edge. An excellent general purpose grade. Applications include medium run dies, press tools, drawing punches, broaches, bushings, lathe centres, chuck jaws, master cavity sinking hobs, paper cutting machine knives, plug gauges, thread gauges and precision measuring tools. It is also used in applications such as cams, cloth cutters, cold taps, reamers, trimmer dies, tube expander rolls, plastic moulds and woodworking cutters, collets, cutting hobs and strip slitting cutters. Top & bottom surfaces supplied in ground condition. Both ends supplied sawn cut. Inch - Preferred Size List Generally available from stock. All sizes listed are 18" long. Tolerances Thickness: -0/+.002" Width: -0/+.008" Length: -0/+.197" Square Bars: -0/+.002" Material Specification DIN Grade..1.2510 (100MnCrW1) Nearest AISI Standard 01 Hardness 230 HB Surface Roughness max. 3.2m Chemical Composition C Carbon 0.90 - 1.05% Si Silicon .............. 0.15 - 0.35% Mn Manganese 1.00 - 1.20% Cr Chromium . 0.50 - 0.70% V Vanadium 0.05 - 0.15% W Tungsten 0.50 - 0.70% P Phosphorous max. 0.035% S Sulphur max. 0.035% Inch - Preferred Size List Generally available from stock. All sizes listed are 18" long.

GBP 79.99
1