27 results (0,15649 seconds)

Show all filters

Brand

Size

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Dormer A100 NO.30 HSS S/S Jobber Drill

Dormer A100 NO.30 HSS S/S Jobber Drill

Series A100 HSS Straight Shank Jobber Drills - Gauge Suitable for drilling steel, cast steel, alloyed and unalloyed, grey cast iron, spheroidal iron, sintered powder metal, German silver and graphite. Manufactured to BS328/DIN338RN. Black Finish (W-Finish) This is the most common surface finish and is the result of a steam tempering operation in which steam is passed over the product during a controlled tempering cycle, producing a black oxide layer. Black tools are generally recommended for ferrous applications where the oxide layer aids chip flow, helps to dissipate heat by retaining some coolant on the tool surface and also helps to prevent the tool from staining.

GBP 1.99
1

Dormer A100 No.31 HSS S/S Jobber Drill

Dormer A100 No.31 HSS S/S Jobber Drill

Series A100 HSS Straight Shank Jobber Drills - Gauge Suitable for drilling steel, cast steel, alloyed and unalloyed, grey cast iron, spheroidal iron, sintered powder metal, German silver and graphite. Manufactured to BS328/DIN338RN. Black Finish (W-Finish) This is the most common surface finish and is the result of a steam tempering operation in which steam is passed over the product during a controlled tempering cycle, producing a black oxide layer. Black tools are generally recommended for ferrous applications where the oxide layer aids chip flow, helps to dissipate heat by retaining some coolant on the tool surface and also helps to prevent the tool from staining.

GBP 4.09
1

Dormer A100 No.40 HSS S/S Jobber Drill

Dormer A100 No.40 HSS S/S Jobber Drill

Series A100 HSS Straight Shank Jobber Drills - Gauge Suitable for drilling steel, cast steel, alloyed and unalloyed, grey cast iron, spheroidal iron, sintered powder metal, German silver and graphite. Manufactured to BS328/DIN338RN. Black Finish (W-Finish) This is the most common surface finish and is the result of a steam tempering operation in which steam is passed over the product during a controlled tempering cycle, producing a black oxide layer. Black tools are generally recommended for ferrous applications where the oxide layer aids chip flow, helps to dissipate heat by retaining some coolant on the tool surface and also helps to prevent the tool from staining.

GBP 3.99
1

Dormer A100 No.21 HSS S/S Jobber Drill

Dormer A100 No.21 HSS S/S Jobber Drill

Series A100 HSS Straight Shank Jobber Drills - Gauge Suitable for drilling steel, cast steel, alloyed and unalloyed, grey cast iron, spheroidal iron, sintered powder metal, German silver and graphite. Manufactured to BS328/DIN338RN. Black Finish (W-Finish) This is the most common surface finish and is the result of a steam tempering operation in which steam is passed over the product during a controlled tempering cycle, producing a black oxide layer. Black tools are generally recommended for ferrous applications where the oxide layer aids chip flow, helps to dissipate heat by retaining some coolant on the tool surface and also helps to prevent the tool from staining.

GBP 2.59
1

Dormer A321 4.5mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

Dormer A321 4.5mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish Material ID: 8349657 Heavy duty design drill with three-flat shanks for medium depth holes. Diameter 4, 5 mm with an overall length of 77 mm. Primarily suited for hand-held operations and pillar drill machines. Three flats on the shank allow for non-slip chucking. The self centering 135 split point reduces thrust force and the steam and bronze tempered surface finish improves lubricity. Suitable for drilling primarily in wide range of thin walled materials. Three-Flats design on shank prevents slipping in power tools keyless chuck Reliable and safe solution for any hand held operation Precisely ground with 135 point and a sharp split point geometry Easy drilling, self-centering capability and reduced thrust force Steam and Bronze temepered surface finish for better lubrication Improved durability throughout the whole life span Shorter intermediate length with strong web design Superior rigidity even in unfavourable conditions Description EAN number 3603607072035 Product number (SAP) 86044338 Ordering code ANSI A3214.5 Gross weight - grams 6.6 Cutting diameter - millimeter (DC) 4.5 mm Cutting diameter - inch (DC) 0.177 inch Length chip flute - millimeter (LCF) 49 mm Overall length - millimeter (OAL) 77 mm Connection diameter - millimeter (DCON MS) 4.5 mm Length chip flute - inch (LCF) 1.9291 inch

GBP 1.99
1

Dormer A321 7.0mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

Dormer A321 7.0mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish Material ID: 8349667 Heavy duty design drill with three-flat shanks for medium depth holes. Diameter 7 mm with an overall length of 97 mm. Primarily suited for hand-held operations and pillar drill machines. Three flats on the shank allow for non-slip chucking. The self centering 135 split point reduces thrust force and the steam and bronze tempered surface finish improves lubricity. Suitable for drilling primarily in wide range of thin walled materials. Three-Flats design on shank prevents slipping in power tools keyless chuck Reliable and safe solution for any hand held operation Precisely ground with 135 point and a sharp split point geometry Easy drilling, self-centering capability and reduced thrust force Steam and Bronze temepered surface finish for better lubrication Improved durability throughout the whole life span Shorter intermediate length with strong web design Superior rigidity even in unfavourable conditions Description EAN number 3603607072134 Product number (SAP) 86044346 Ordering code ANSI A3217.0 Gross weight - grams 22.373 Cutting diameter - millimeter (DC) 7 mm Cutting diameter - inch (DC) 0.276 inch Length chip flute - millimeter (LCF) 59 mm Overall length - millimeter (OAL) 97 mm Connection diameter - millimeter (DCON MS) 7 mm Length chip flute - inch (LCF) 2.3228 inch

GBP 3.99
1

Dormer A321 6.0mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

Dormer A321 6.0mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish Material ID: 8349663 Heavy duty design drill with three-flat shanks for medium depth holes. Diameter 6 mm with an overall length of 90 mm. Primarily suited for hand-held operations and pillar drill machines. Three flats on the shank allow for non-slip chucking. The self centering 135 split point reduces thrust force and the steam and bronze tempered surface finish improves lubricity. Suitable for drilling primarily in wide range of thin walled materials. Three-Flats design on shank prevents slipping in power tools keyless chuck Reliable and safe solution for any hand held operation Precisely ground with 135 point and a sharp split point geometry Easy drilling, self-centering capability and reduced thrust force Steam and Bronze temepered surface finish for better lubrication Improved durability throughout the whole life span Shorter intermediate length with strong web design Superior rigidity even in unfavourable conditions Description EAN number 3603607072097 Product number (SAP) 86044343 Ordering code ANSI A3216.0 Gross weight - grams 16 Cutting diameter - millimeter (DC) 6 mm Cutting diameter - inch (DC) 0.236 inch Length chip flute - millimeter (LCF) 52 mm Overall length - millimeter (OAL) 90 mm Connection diameter - millimeter (DCON MS) 6 mm Length chip flute - inch (LCF) 2.0472 inch

GBP 2.79
1

Dormer A321 4.1mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

Dormer A321 4.1mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish Material ID: 8349654 Heavy duty design drill with three-flat shanks for medium depth holes. Diameter 4, 1 mm with an overall length of 74 mm. Primarily suited for hand-held operations and pillar drill machines. Three flats on the shank allow for non-slip chucking. The self centering 135 split point reduces thrust force and the steam and bronze tempered surface finish improves lubricity. Suitable for drilling primarily in wide range of thin walled materials. Three-Flats design on shank prevents slipping in power tools keyless chuck Reliable and safe solution for any hand held operation Precisely ground with 135 point and a sharp split point geometry Easy drilling, self-centering capability and reduced thrust force Steam and Bronze temepered surface finish for better lubrication Improved durability throughout the whole life span Shorter intermediate length with strong web design Superior rigidity even in unfavourable conditions Description EAN number 3603607072004 Product number (SAP) 86044335 Ordering code ANSI A3214.1 Gross weight - grams 5.041 Cutting diameter - millimeter (DC) 4.1 mm Cutting diameter - inch (DC) 0.161 inch Length chip flute - millimeter (LCF) 47 mm Overall length - millimeter (OAL) 74 mm Connection diameter - millimeter (DCON MS) 4.1 mm Length chip flute - inch (LCF) 1.8504 inch

GBP 1.79
1

Dormer A321 5.5mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

Dormer A321 5.5mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish Material ID: 8349662 Heavy duty design drill with three-flat shanks for medium depth holes. Diameter 5, 5 mm with an overall length of 84 mm. Primarily suited for hand-held operations and pillar drill machines. Three flats on the shank allow for non-slip chucking. The self centering 135 split point reduces thrust force and the steam and bronze tempered surface finish improves lubricity. Suitable for drilling primarily in wide range of thin walled materials. Three-Flats design on shank prevents slipping in power tools keyless chuck Reliable and safe solution for any hand held operation Precisely ground with 135 point and a sharp split point geometry Easy drilling, self-centering capability and reduced thrust force Steam and Bronze temepered surface finish for better lubrication Improved durability throughout the whole life span Shorter intermediate length with strong web design Superior rigidity even in unfavourable conditions Description EAN number 3603607072080 Product number (SAP) 86044342 Ordering code ANSI A3215.5 Gross weight - grams 12.1 Cutting diameter - millimeter (DC) 5.5 mm Cutting diameter - inch (DC) 0.217 inch Length chip flute - millimeter (LCF) 52 mm Overall length - millimeter (OAL) 84 mm Connection diameter - millimeter (DCON MS) 5.5 mm Length chip flute - inch (LCF) 2.0472 inch

GBP 2.99
1

Dormer A321 6.3mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

Dormer A321 6.3mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish Material ID: 8349664 Heavy duty design drill with three-flat shanks for medium depth holes. Diameter 6, 3 mm with an overall length of 90 mm. Primarily suited for hand-held operations and pillar drill machines. Three flats on the shank allow for non-slip chucking. The self centering 135 split point reduces thrust force and the steam and bronze tempered surface finish improves lubricity. Suitable for drilling primarily in wide range of thin walled materials. Three-Flats design on shank prevents slipping in power tools keyless chuck Reliable and safe solution for any hand held operation Precisely ground with 135 point and a sharp split point geometry Easy drilling, self-centering capability and reduced thrust force Steam and Bronze temepered surface finish for better lubrication Improved durability throughout the whole life span Shorter intermediate length with strong web design Superior rigidity even in unfavourable conditions Description EAN number 3603607072103 Product number (SAP) 86044344 Ordering code ANSI A3216.3 Gross weight - grams 16.871 Cutting diameter - millimeter (DC) 6.3 mm Cutting diameter - inch (DC) 0.248 inch Length chip flute - millimeter (LCF) 52 mm Overall length - millimeter (OAL) 90 mm Connection diameter - millimeter (DCON MS) 6.3 mm Length chip flute - inch (LCF) 2.0472 inch

GBP 2.99
1

Dormer A321 7.5mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

Dormer A321 7.5mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish Material ID: 8349669 Heavy duty design drill with three-flat shanks for medium depth holes. Diameter 7, 5 mm with an overall length of 100 mm. Primarily suited for hand-held operations and pillar drill machines. Three flats on the shank allow for non-slip chucking. The self centering 135 split point reduces thrust force and the steam and bronze tempered surface finish improves lubricity. Suitable for drilling primarily in wide range of thin walled materials. Three-Flats design on shank prevents slipping in power tools keyless chuck Reliable and safe solution for any hand held operation Precisely ground with 135 point and a sharp split point geometry Easy drilling, self-centering capability and reduced thrust force Steam and Bronze temepered surface finish for better lubrication Improved durability throughout the whole life span Shorter intermediate length with strong web design Superior rigidity even in unfavourable conditions Description EAN number 3603607072158 Product number (SAP) 86044348 Ordering code ANSI A3217.5 Gross weight - grams 23.871 Cutting diameter - millimeter (DC) 7.5 mm Cutting diameter - inch (DC) 0.295 inch Length chip flute - millimeter (LCF) 62 mm Overall length - millimeter (OAL) 100 mm Connection diameter - millimeter (DCON MS) 7.5 mm Length chip flute - inch (LCF) 2.4409 inch

GBP 3.29
1

Dormer A321 4.3mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

Dormer A321 4.3mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish Material ID: 8349656 Heavy duty design drill with three-flat shanks for medium depth holes. Diameter 4, 3 mm with an overall length of 74 mm. Primarily suited for hand-held operations and pillar drill machines. Three flats on the shank allow for non-slip chucking. The self centering 135 split point reduces thrust force and the steam and bronze tempered surface finish improves lubricity. Suitable for drilling primarily in wide range of thin walled materials. Three-Flats design on shank prevents slipping in power tools keyless chuck Reliable and safe solution for any hand held operation Precisely ground with 135 point and a sharp split point geometry Easy drilling, self-centering capability and reduced thrust force Steam and Bronze temepered surface finish for better lubrication Improved durability throughout the whole life span Shorter intermediate length with strong web design Superior rigidity even in unfavourable conditions Description EAN number 3603607072028 Product number (SAP) 86044337 Ordering code ANSI A3214.3 Gross weight - grams 6 Cutting diameter - millimeter (DC) 4.3 mm Cutting diameter - inch (DC) 0.169 inch Length chip flute - millimeter (LCF) 47 mm Overall length - millimeter (OAL) 74 mm Connection diameter - millimeter (DCON MS) 4.3 mm Length chip flute - inch (LCF) 1.8504 inch

GBP 2.49
1

Dormer A321 8.0mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

Dormer A321 8.0mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish Material ID: 8349670 Heavy duty design drill with three-flat shanks for medium depth holes. Diameter 8 mm with an overall length of 105 mm. Primarily suited for hand-held operations and pillar drill machines. Three flats on the shank allow for non-slip chucking. The self centering 135 split point reduces thrust force and the steam and bronze tempered surface finish improves lubricity. Suitable for drilling primarily in wide range of thin walled materials. Three-Flats design on shank prevents slipping in power tools keyless chuck Reliable and safe solution for any hand held operation Precisely ground with 135 point and a sharp split point geometry Easy drilling, self-centering capability and reduced thrust force Steam and Bronze temepered surface finish for better lubrication Improved durability throughout the whole life span Shorter intermediate length with strong web design Superior rigidity even in unfavourable conditions Description EAN number 3603607072165 Product number (SAP) 86044175 Ordering code ANSI A3218.0 Gross weight - grams 29.228 Cutting diameter - millimeter (DC) 8 mm Cutting diameter - inch (DC) 0.315 inch Length chip flute - millimeter (LCF) 67 mm Overall length - millimeter (OAL) 105 mm Connection diameter - millimeter (DCON MS) 8 mm Length chip flute - inch (LCF) 2.6378 inch

GBP 4.09
1

Dormer A321 6.5mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

Dormer A321 6.5mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish Material ID: 8349665 Heavy duty design drill with three-flat shanks for medium depth holes. Diameter 6, 5 mm with an overall length of 93 mm. Primarily suited for hand-held operations and pillar drill machines. Three flats on the shank allow for non-slip chucking. The self centering 135 split point reduces thrust force and the steam and bronze tempered surface finish improves lubricity. Suitable for drilling primarily in wide range of thin walled materials. Three-Flats design on shank prevents slipping in power tools keyless chuck Reliable and safe solution for any hand held operation Precisely ground with 135 point and a sharp split point geometry Easy drilling, self-centering capability and reduced thrust force Steam and Bronze temepered surface finish for better lubrication Improved durability throughout the whole life span Shorter intermediate length with strong web design Superior rigidity even in unfavourable conditions Description EAN number 3603607072110 Product number (SAP) 86044345 Ordering code ANSI A3216.5 Gross weight - grams 17.407 Cutting diameter - millimeter (DC) 6.5 mm Cutting diameter - inch (DC) 0.256 inch Length chip flute - millimeter (LCF) 55 mm Overall length - millimeter (OAL) 93 mm Connection diameter - millimeter (DCON MS) 6.5 mm Length chip flute - inch (LCF) 2.1654 inch

GBP 3.49
1

Dormer A321 5.3mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

Dormer A321 5.3mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish Material ID: 8349661 Heavy duty design drill with three-flat shanks for medium depth holes. Diameter 5, 3 mm with an overall length of 84 mm. Primarily suited for hand-held operations and pillar drill machines. Three flats on the shank allow for non-slip chucking. The self centering 135 split point reduces thrust force and the steam and bronze tempered surface finish improves lubricity. Suitable for drilling primarily in wide range of thin walled materials. Three-Flats design on shank prevents slipping in power tools keyless chuck Reliable and safe solution for any hand held operation Precisely ground with 135 point and a sharp split point geometry Easy drilling, self-centering capability and reduced thrust force Steam and Bronze temepered surface finish for better lubrication Improved durability throughout the whole life span Shorter intermediate length with strong web design Superior rigidity even in unfavourable conditions Description EAN number 3603607072073 Product number (SAP) 86044341 Ordering code ANSI A3215.3 Gross weight - grams 10.443 Cutting diameter - millimeter (DC) 5.3 mm Cutting diameter - inch (DC) 0.209 inch Length chip flute - millimeter (LCF) 52 mm Overall length - millimeter (OAL) 84 mm Connection diameter - millimeter (DCON MS) 5.3 mm Length chip flute - inch (LCF) 2.0472 inch

GBP 2.39
1

Dormer A321 5.0mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

Dormer A321 5.0mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish Material ID: 8349659 Heavy duty design drill with three-flat shanks for medium depth holes. Diameter 5 mm with an overall length of 80 mm. Primarily suited for hand-held operations and pillar drill machines. Three flats on the shank allow for non-slip chucking. The self centering 135 split point reduces thrust force and the steam and bronze tempered surface finish improves lubricity. Suitable for drilling primarily in wide range of thin walled materials. Three-Flats design on shank prevents slipping in power tools keyless chuck Reliable and safe solution for any hand held operation Precisely ground with 135 point and a sharp split point geometry Easy drilling, self-centering capability and reduced thrust force Steam and Bronze temepered surface finish for better lubrication Improved durability throughout the whole life span Shorter intermediate length with strong web design Superior rigidity even in unfavourable conditions Description EAN number 3603607072059 Product number (SAP) 86044174 Ordering code ANSI A3215.0 Gross weight - grams 8.399 Cutting diameter - millimeter (DC) 5 mm Cutting diameter - inch (DC) 0.197 inch Length chip flute - millimeter (LCF) 50 mm Overall length - millimeter (OAL) 80 mm Connection diameter - millimeter (DCON MS) 5 mm Length chip flute - inch (LCF) 1.9685 inch

GBP 2.49
1

Dormer A321 4.9mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

Dormer A321 4.9mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish Material ID: 8349658 Heavy duty design drill with three-flat shanks for medium depth holes. Diameter 4, 9 mm with an overall length of 80 mm. Primarily suited for hand-held operations and pillar drill machines. Three flats on the shank allow for non-slip chucking. The self centering 135 split point reduces thrust force and the steam and bronze tempered surface finish improves lubricity. Suitable for drilling primarily in wide range of thin walled materials. Three-Flats design on shank prevents slipping in power tools keyless chuck Reliable and safe solution for any hand held operation Precisely ground with 135 point and a sharp split point geometry Easy drilling, self-centering capability and reduced thrust force Steam and Bronze temepered surface finish for better lubrication Improved durability throughout the whole life span Shorter intermediate length with strong web design Superior rigidity even in unfavourable conditions Description EAN number 3603607072042 Product number (SAP) 86044339 Ordering code ANSI A3214.9 Gross weight - grams 8.231 Cutting diameter - millimeter (DC) 4.9 mm Cutting diameter - inch (DC) 0.193 inch Length chip flute - millimeter (LCF) 50 mm Overall length - millimeter (OAL) 80 mm Connection diameter - millimeter (DCON MS) 4.9 mm Length chip flute - inch (LCF) 1.9685 inch

GBP 2.24
1

Dormer A321 3.3mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

Dormer A321 3.3mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish Material ID: 8349650 Heavy duty design drill with three-flat shanks for medium depth holes. Diameter 3, 3 mm with an overall length of 67 mm. Primarily suited for hand-held operations and pillar drill machines. Three flats on the shank allow for non-slip chucking. The self centering 135 split point reduces thrust force and the steam and bronze tempered surface finish improves lubricity. Suitable for drilling primarily in wide range of thin walled materials. Three-Flats design on shank prevents slipping in power tools keyless chuck Reliable and safe solution for any hand held operation Precisely ground with 135 point and a sharp split point geometry Easy drilling, self-centering capability and reduced thrust force Steam and Bronze temepered surface finish for better lubrication Improved durability throughout the whole life span Shorter intermediate length with strong web design Superior rigidity even in unfavourable conditions Description EAN number 3603607071960 Product number (SAP) 86044331 Ordering code ANSI A3213.3 Gross weight - grams 3.035 Cutting diameter - millimeter (DC) 3.3 mm Cutting diameter - inch (DC) 0.13 inch Length chip flute - millimeter (LCF) 40 mm Overall length - millimeter (OAL) 67 mm Connection diameter - millimeter (DCON MS) 3.3 mm Length chip flute - inch (LCF) 1.5748 inch

GBP 1.29
1

Dormer A321 3.0mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

Dormer A321 3.0mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish Material ID: 8349599 Heavy duty design drill with three-flat shanks for medium depth holes. Diameter 3 mm with an overall length of 64 mm. Primarily suited for hand-held operations and pillar drill machines. Three flats on the shank allow for non-slip chucking. The self centering 135 split point reduces thrust force and the steam and bronze tempered surface finish improves lubricity. Suitable for drilling primarily in wide range of thin walled materials. Three-Flats design on shank prevents slipping in power tools keyless chuck Reliable and safe solution for any hand held operation Precisely ground with 135 point and a sharp split point geometry Easy drilling, self-centering capability and reduced thrust force Steam and Bronze temepered surface finish for better lubrication Improved durability throughout the whole life span Shorter intermediate length with strong web design Superior rigidity even in unfavourable conditions Description EAN number 3603607071953 Product number (SAP) 86044155 Ordering code ANSI A3213.0 Gross weight - grams 2.7 Cutting diameter - millimeter (DC) 3 mm Cutting diameter - inch (DC) 0.118 inch Length chip flute - millimeter (LCF) 37 mm Overall length - millimeter (OAL) 64 mm Connection diameter - millimeter (DCON MS) 3 mm Length chip flute - inch (LCF) 1.4567 inch

GBP 1.29
1

Dormer A321 7.3mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

Dormer A321 7.3mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish Material ID: 8349668 Heavy duty design drill with three-flat shanks for medium depth holes. Diameter 7, 3 mm with an overall length of 100 mm. Primarily suited for hand-held operations and pillar drill machines. Three flats on the shank allow for non-slip chucking. The self centering 135 split point reduces thrust force and the steam and bronze tempered surface finish improves lubricity. Suitable for drilling primarily in wide range of thin walled materials. Three-Flats design on shank prevents slipping in power tools keyless chuck Reliable and safe solution for any hand held operation Precisely ground with 135 point and a sharp split point geometry Easy drilling, self-centering capability and reduced thrust force Steam and Bronze temepered surface finish for better lubrication Improved durability throughout the whole life span Shorter intermediate length with strong web design Superior rigidity even in unfavourable conditions Description EAN number 3603607072141 Product number (SAP) 86044347 Ordering code ANSI A3217.3 Gross weight - grams 23.331 Cutting diameter - millimeter (DC) 7.3 mm Cutting diameter - inch (DC) 0.287 inch Length chip flute - millimeter (LCF) 62 mm Overall length - millimeter (OAL) 100 mm Connection diameter - millimeter (DCON MS) 7.3 mm Length chip flute - inch (LCF) 2.4409 inch

GBP 3.49
1

Dormer A321 4.0mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

Dormer A321 4.0mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish Material ID: 8349653 Heavy duty design drill with three-flat shanks for medium depth holes. Diameter 4 mm with an overall length of 74 mm. Primarily suited for hand-held operations and pillar drill machines. Three flats on the shank allow for non-slip chucking. The self centering 135 split point reduces thrust force and the steam and bronze tempered surface finish improves lubricity. Suitable for drilling primarily in wide range of thin walled materials. Three-Flats design on shank prevents slipping in power tools keyless chuck Reliable and safe solution for any hand held operation Precisely ground with 135 point and a sharp split point geometry Easy drilling, self-centering capability and reduced thrust force Steam and Bronze temepered surface finish for better lubrication Improved durability throughout the whole life span Shorter intermediate length with strong web design Superior rigidity even in unfavourable conditions Description EAN number 3603607071991 Product number (SAP) 86044334 Ordering code ANSI A3214.0 Gross weight - grams 4.918 Cutting diameter - millimeter (DC) 4 mm Cutting diameter - inch (DC) 0.158 inch Length chip flute - millimeter (LCF) 47 mm Overall length - millimeter (OAL) 74 mm Connection diameter - millimeter (DCON MS) 4 mm Length chip flute - inch (LCF) 1.8504 inch

GBP 1.59
1

Dormer A321 3.4mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

Dormer A321 3.4mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish Material ID: 8349651 Heavy duty design drill with three-flat shanks for medium depth holes. Diameter 3, 4 mm with an overall length of 67 mm. Primarily suited for hand-held operations and pillar drill machines. Three flats on the shank allow for non-slip chucking. The self centering 135 split point reduces thrust force and the steam and bronze tempered surface finish improves lubricity. Suitable for drilling primarily in wide range of thin walled materials. Three-Flats design on shank prevents slipping in power tools keyless chuck Reliable and safe solution for any hand held operation Precisely ground with 135 point and a sharp split point geometry Easy drilling, self-centering capability and reduced thrust force Steam and Bronze temepered surface finish for better lubrication Improved durability throughout the whole life span Shorter intermediate length with strong web design Superior rigidity even in unfavourable conditions Description EAN number 3603607071977 Product number (SAP) 86044332 Ordering code ANSI A3213.4 Gross weight - grams 3.127 Cutting diameter - millimeter (DC) 3.4 mm Cutting diameter - inch (DC) 0.134 inch Length chip flute - millimeter (LCF) 40 mm Overall length - millimeter (OAL) 67 mm Connection diameter - millimeter (DCON MS) 3.4 mm Length chip flute - inch (LCF) 1.5748 inch

GBP 1.49
1