12 results (0,14039 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Domus DX-CON - Multi Fan Remote Control

Domus DX-CON - Multi Fan Remote Control

Domus DX-CON - Multi Fan Remote Control Optional remote controller DX-CON, designed to work the DX fan range and integral and remote sensors. Features Provides supply or extract variable speed Automatic or manual switching of several fans Economy speed setting 50% On/off switches Maximum or economy performance Control DX-CON can control several fans at one time from the same controller Up to 5 6” fans Up to 5 9” fans Up to 2 12” fans Do not mix fan sizes on the same controller Installation Mount the controller 1.5 meters from the floor Do no expose to large amount of oil, grease or water To install - Lift panel and remove two screws - Push out the backplate box cable entry using a screwdriver - Spot through backplate box and drill and plug the wall. Flat the backplate box to the prepared wall - Feed 20cm of the supply cable into the box - Connect end of the cable into the control block, connect wires (see wiring diagram) - If a security strap has been fitted, hook the lip of the security strap in hinge socket. Fit the control into the backplate box - Secure installation

GBP 132.19
1

Domus HRX-E AURA Heat Recovery Unit

Domus HRX-E AURA Heat Recovery Unit

Domus HRXE-AURA-H Opposite Handed - HRXE-AURA-OPH   Description The Domus HRXE-AURA-H provides a maximum flow rate of 320m3/hr suitable for a house up to 190 m2 floor area with up to 5 kitchens & bathrooms Controllability is provided by an internal humidity sensors and optional room sensors or switches (no digital controller is available for this model) BPC Ventilation are the largest independent MVHR specialists and supply this unit with up to a 5-year parts warranty* and lifetime technical support on our top-quality systems Integral Humidity Sensor The Domus unit has an Internal Humidity sensor that can provide a superior demand-controlled ventilation solution for your property When the unit senses that the humidity exceeds the set point the unit will boost to that set by the commissioned boost speed. The humidity can be set on the front of the unit We also advise an optional boost switch should be used local to the wet rooms Filtration 2 x G3 filters are fitted to the unit that are easy and inexpensive to replace (The filters are provided with plastic covers that should be removed before starting unit for first time) CONTROL OPTIONS The Domus units are controlled by one of the following: 4 x adjustable switches on the front of the unit Manual control Via optional 3 speed manual switch On-demand ventilation through built-in humidity sensors Additional external sensors achieving on-demand ventilation Switched live signal from light/remote switches Heat Exchanger This unit has a high-quality PVC counterflow heat exchanger with up to a 90% thermal efficiency protected with high-capacity filters on each side The heat exchanger is easy to remove for maintenance and any accumulated condensation is easily dispersed via a drain at the bottom of the unit Frost Protection In the event of the intake air temperature at the unit dropping below the predetermined set point (-5°C as standard) the supply fan will reduce to minimum speed, once the temperature rises above the set point the fan will return to its commissioned speed. Frost protection will only activate after ten days of continuous run time. Summer By-Pass The Domus units have a 100% summer by-Pass If the indoor temperature Intake exceeds 25°C and the outdoor temperature is within comfort zones the summer by-pass is opened automatically to help provide a comfortable indoor temperature Orientation The Domus units can be right or left-handed and correct orientation should be checked before purchase  Construction Manufactured of powder coated galvanised steel outer cover for durability and an inside EPP lining for quietness and efficiency Mounting The units are wall mounted as standard and are supplied with a wall bracket AV (anti vibration mounting kit) - HRXE-AURA-AV  The optional anti vibration kit can be used for both wall and floor Tank Stand The MVHR unit can be positioned on the optional tank stand using the Anti-vibration tray assembly discarding the angle brackets. (7) Angled Brackets The unit can be installed above the floor on a wall angled bracket (8) Accessories Condensation Drain – 397 Aura Replacement filters SPR428  

GBP 1480.66
1

Domus HRX-E HERA Heat Recovery Unit

Domus HRX-E HERA Heat Recovery Unit

Domus HRX-E HERA Heat Recovery Unit Product Part Number Domus HRXE-HERA-H Opposite Handed - HRXE-HERA-OPH Description The Domus HRXE-HERA-H provides a maximum flow rate of 288m3/hr suitable for a house up to 172 m2 floor area with up to 5 kitchens & bathrooms Controllability is provided by an internal humidity sensors and optional room sensors or switches (no digital controller is available for this model) BPC Ventilation are the largest independent MVHR specialists and supply this unit with up to a 5-year parts warranty* and lifetime technical support on our top-quality systems, Integral Humidity Sensor The Domus unit has an Internal Humidity sensor that can provide a superior demand-controlled ventilation solution for your property When the unit senses that the humidity exceeds the set point the unit will boost to that set by the commissioned boost speed. The humidity can be set on the front of the unit We also advise an optional boost switch should be used local to the wet rooms Filtration 2 x G3 filters are fitted to the unit that are easy and inexpensive to replace (The filters are provided with plastic covers that should be removed before starting unit for first time) CONTROL OPTIONS The Domus units are controlled by one of the following: 4 x adjustable switches on the front of the unit Manual control Via optional 3 speed manual switch On-demand ventilation through built-in humidity sensors Additional external sensors achieving on-demand ventilation Switched live signal from light/remote switches Heat Exchanger This unit has a high-quality PVC counterflow heat exchanger with up to a 90% thermal efficiency protected with high-capacity filters on each side The heat exchanger is easy to remove for maintenance and any accumulated condensation is easily dispersed via a drain at the bottom of the unit Frost Protection In the event of the intake air temperature at the unit dropping below the predetermined set point (-5°C as standard) the supply fan will reduce to minimum speed, once the temperature rises above the set point the fan will return to its commissioned speed. Frost protection will only activate after ten days of continuous run time. Summer By-Pass The Domus units have a 100% summer by-Pass If the indoor temperature Intake exceeds 25°C and the outdoor temperature is within comfort zones the summer by-pass is opened automatically to help provide a comfortable indoor temperature Orientation The Domus units can be right or left-handed and correct orientation should be checked before purchase  Construction Manufactured of powder coated galvanised steel outer cover for durability and an inside EPP lining for quietness and efficiency Mounting The units are wall mounted as standard and are supplied with a wall bracket AV (anti vibration mounting kit) - HRXE-HERA-AV The optional anti vibration kit can be used for both wall and floor Tank Stand The MVHR unit can be positioned on the optional tank stand using the Anti-vibration tray assembly discarding the angle brackets. (7) Angled Brackets The unit can be installed above the floor on a wall angled bracket (8) Accessories Condensation Drain – 297 HEAR Replacement filters SPR428  

GBP 1270.67
1

Domus HRXE-ZEUS

Domus HRXE-ZEUS

Domus HRXE-ZEUS Product Part Number Domus HRXE-ZEUS-H Opposite Handed - HRXE-ZEUS-OPH Description The Domus HRXE-ZEUS-H provides a maximum flow rate of 550m3/hr suitable for a house up to 330 m2 floor area with up to 10 kitchens & bathrooms Controllability is provided by an internal humidity sensors and optional room sensors or switches (no digital controller is available for this model) BPC Ventilation are the largest independent MVHR specialists and supply this unit with up to a 5-year parts warranty* and lifetime technical support on our top-quality systems Integral Humidity Sensor The Domus unit has an Internal Humidity sensor that can provide a superior demand-controlled ventilation solution for your property When the unit senses that the humidity exceeds the set point the unit will boost to that set by the commissioned boost speed. The humidity can be set on the front of the unit We also advise an optional boost switch should be used local to the wet rooms Filtration 2 x G3 filters are fitted to the unit that are easy and inexpensive to replace (The filters are provided with plastic covers that should be removed before starting unit for first time) CONTROL OPTIONS The Domus units are controlled by one of the following: 4 x adjustable switches on the front of the unit Manual control Via optional 3 speed manual switch On-demand ventilation through built-in humidity sensors Additional external sensors achieving on-demand ventilation Switched live signal from light/remote switches Heat Exchanger This unit has a high-quality PVC counterflow heat exchanger with up to a 90% thermal efficiency protected with high-capacity filters on each side The heat exchanger is easy to remove for maintenance and any accumulated condensation is easily dispersed via a drain at the bottom of the unit Frost Protection In the event of the intake air temperature at the unit dropping below the predetermined set point (-5°C as standard) the supply fan will reduce to minimum speed, once the temperature rises above the set point the fan will return to its commissioned speed. Frost protection will only activate after ten days of continuous run time. Summer By-Pass The Domus units have a 100% summer by-Pass If the indoor temperature Intake exceeds 25°C and the outdoor temperature is within comfort zones the summer by-pass is opened automatically to help provide a comfortable indoor temperature Orientation The Domus units can be right or left-handed and correct orientation should be checked before purchase Construction Manufactured of powder coated galvanised steel outer cover for durability and an inside EPP lining for quietness and efficiency Mounting The units are wall mounted as standard and are supplied with a wall bracket AV (anti vibration mounting kit) - HRXE-XEUS-AV The optional anti vibration kit can be used for both wall and floor Tank Stand The MVHR unit can be positioned on the optional tank stand using the Anti-vibration tray assembly discarding the angle brackets. (7) Angled Brackets The unit can be installed above the floor on a wall angled bracket (8) Accessories Condensation Drain – 297 ZEUS Replacement filters SPR459  

GBP 2935.30
1

Rectangular Ducting Connector

Rectangular Ducting Connector

Rectangular Ducting Connector Product Part Number 110x54mm Connector - C110 204x60mm Connector - C204 220x90 Connector - C220 Description Rectangular Ducting Connector can be used to run your ductwork around obstacles, along walls and into ceilings and offers superior performance and durability over flexible alternatives. Is designed to be low profile to fit inside ceilings, floor slabs, or to be concealed above kitchen wall units. It is best utilised as part of a ducting system for high powered cooker hood extractors and whole house ventilation systems, such as heat recovery systems or mechanical ventilation systems in offices, houses, and apartments. Compatibility Compatible with most manufactures including    110X54  204X60  220X90 Verplas  VKC235  VKC5608  VKC5708  Vent-Axia  436605         436623  403026  Manrose  40200  58200  55200 Domus  40020  520  920 Nuaire  PVC020WH   PVC520WH 

GBP 1.10
1

Rectangular Horizontal 45° Bend

Rectangular Horizontal 45° Bend

Rectangular Horizontal 45° Bend Product Part Number 110x54 Horizontal 45 degree Bend - HB45110 204x60 Horizontal 45 degree Bend - HB204-45 220x90 Horizontal 45 degree Bend - HB22045 Description Our range of plastic ducting is UK manufactured with top quality materials that will supply a durable product suitable for domestic and commercial systems This horizontal 45 degree bend can be used to run your ductwork around obstacles, along walls and into ceilings and offers superior performance and durability over flexible alternatives. Is designed to be low profile to fit inside ceilings, floor slabs, or to be concealed above kitchen wall units. It is best utilised as part of a ducting system for high powered cooker hood extractors and whole house ventilation systems, such as heat recovery systems or mechanical ventilation systems in offices, houses, and apartments. Compatibility Compatible with most manufactures including   110X54 204X60 220X90 Verplas  VKC227  VKC5616  VKC5716 Vent-Axia         -  249944  449363 Manrose  40450  55810       - Domus  40055  50555  955 Nuaire PVC055WH  PVC555WH       - Performance

GBP 3.44
1

Rectangular Ducting Horizontal 90° Bend

Rectangular Ducting Horizontal 90° Bend

Rectangular Ducting Horizontal 90° Bend Product Part Number 110x54 Horizontal 90 degree Bend - HB90110 204x60 Horizontal 90 degree Bend - HB204-90 220x90 Horizontal 90 degree Bend - HB220 Description Our range of plastic ducting is UK manufactured with top quality materials that will supply a durable product suitable for domestic and commercial systems This horizontal 90 degree bend can be used to run your ductwork around obstacles, along walls and into ceilings and offers superior performance and durability over flexible alternatives. Designed to be low profile to fit inside ceilings, floor slabs, or to be concealed above kitchen wall units. It is best utilised as part of a ducting system for high powered cooker hood extractors and whole house ventilation systems, such as heat recovery systems or mechanical ventilation systems in offices, houses, and apartments. Compatibility Compatible with most manufactures including   110X54 204X60 220X90 Verplas VKC238 VKC5605 VKC5705 Vent-Axia 436602 436620 403028 Manrose 1510 1550       - Domus 40050 50550 950 Nuaire PVC050WH PVC550WH       -  

GBP 3.18
1

Rectangular Ducting 90° Vertical Bend

Rectangular Ducting 90° Vertical Bend

Domus Rectangular Ducting 90° Vertical Bend Product Part Number 110x54mm Vertical 90 degree Bend - VB90110 204x60mm Vertical 90 degree Bend - VB204-90 220x90mm Vertical 90 degree Bend - VB220-90 Description Our range of plastic ducting is UK manufactured with top quality materials that will supply a durable product suitable for domestic and commercial systems This vertical 90 degree bend can be used to run your ductwork around obstacles, along walls and into ceilings and offers superior performance and durability over flexible alternatives. Both sides are female sockets Is designed to be low profile to fit inside ceilings, floor slabs, or to be concealed above kitchen wall units. It is best utilised as part of a ducting system for high powered cooker hood extractors and whole house ventilation systems, such as heat recovery systems or mechanical ventilation systems in offices, houses, and apartments.   Compatibility Compatible with most manufactures including   110X54 204X60 220X90 Verplas VKC239 VKC5612 VKC5712 Vent-Axia 436603 436621 403029 Manrose 40600 58600 55600 Domus 060 560 960 Nuaire PVC050WH

GBP 1.88
1

Rectangular Ducting 45° Vertical Bend

Rectangular Ducting 45° Vertical Bend

Rectangular Ducting 45° Vertical Bend Product Part Number 110x54mm Vertical 45 degree Bend - VB45110 204x60mm Vertical 45 degree Bend - VB204-45 220x90mm Vertical 45 degree Bend - VB220-45 Description Our range of plastic ducting is UK manufactured with top quality materials that will supply a durable product suitable for domestic and commercial systems This vertical 45 degree elbow bend can be used to run your ductwork around obstacles, along walls and into ceilings and offers superior performance and durability over flexible alternatives. Both sides are female sockets. Is designed to be low profile to fit inside ceilings, floor slabs, or to be concealed above kitchen wall units. It is best utilised as part of a ducting system for high powered cooker hood extractors and whole house ventilation systems, such as heat recovery systems or mechanical ventilation systems in offices, houses, and apartments. Compatibility Compatible with most manufactures including   110X54 204X60 220X90 Verplas VKC226 VKC5617 VKC5717 Vent-Axia 445196 441655 449364 Manrose 40045        -        - Domus 40075 50575 975 Nuaire PVC075WH PVC55WH

GBP 6.92
1

Special Offer - Domus CMX-MULTI MEV Unit

Special Offer - Domus CMX-MULTI MEV Unit

Special Offer - Returned Unit, Fully working and in new condition Domus CMX-MULTI MEV Unit This mechanical extraction ventilation unit is ideal for residential applications, the Domus CMX-MULTI is a unit adapted for installation horizontally or vertically, allowing flexible placement. This unit has a depth of 125mm, making it ideal for areas where space is restricted, such as small ceiling voids. The CMX-MULTI is designed for use in small to medium-sized houses and apartments. The 204x60mm duct connections can be converted to round ducting via the use of additional adaptors if required. Key Features Integral humidistat Very compact, only 125mm deep Very lightweight, 2 years standard parts warranty This unit is available with or without a humidity sensor This unit can be mounted on the floor, wall or ceiling Technical Features Fantastic SFP as low as 0.14 (W/l/s) Max Extract Volume of 409mᶟh Dimensions: 595 x 340 x 125 (mm) 3 inlet spigots at 204x60mm Weight 3.1kg This unit has a low energy, high efficiency EC backward curved centrifugal impeller fan/motor assembly with sealed-for-life bearings suitable for +50°C to -25°C Construction The outer casing is manufactured from expanded polypropylene, reducing both weight and system noise. Due to its compact size, it allows flexible installation Domus CMX-Multi MEV units can be installed horizontally or vertically and is ideal to be fitted inside kitchen/utility room cupboards, directly into a ceiling or loft space or within a joist space.

GBP 270.00
1