84 results (0,17844 seconds)

Show all filters

Brand

Size

Show all

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Aquasol I-Purge X Modular Inflatable Bladder System 51-76mm

Aquasol I-Purge X Modular Inflatable Bladder System 51-76mm

Achieve flawless welds with the Aquasol I-Purge X Modular Inflatable Bladder System, the industry's most advanced and versatile pipe purging solution. Designed to meet the needs of even the most demanding welding applications, the I-Purge X system delivers exceptional performance, unmatched versatility, and cost-saving benefits. Benefits Achieve consistently high-quality welds Reduce purge gas consumption and save money Minimise downtime with quick and easy setup Protect equipment from heat damage Enjoy long-lasting performance and versatility Features Bladder Expansion Technology (BET): Enables one unit to fit multiple pipe sizes, reducing your inventory and saving money Quick Connect Fittings: Snap-in place for easy assembly and disassembly, minimising downtime Extended Length, High Heat Resistant Harness: Allows bladders to be placed outside the heat-affected zone, protecting equipment and ensuring safety Reusable and Expandable: Built to last, with the ability to expand and fit multiple pipe specifications, maximising your investment. Application Pipe purging for welding Isolating valves and tanks Sealing pipe systems for servicing, cleaning, and inspection Instructions 1. Ensure I-Purge X is fully assembled (i.e., modules are securely connected to harness) 2. If necessary, connect rope, chain, or wire to the pull loops on the ends of the bladder modules. This will allow you easy insertion and removal of the system. 3. Connect inert gas lines to the BLUE and BLACK hoses. BLUE gas hose is required to inflate the purge bladders. BLACK gas hose is optional to expedite the purging process. 4. Position the purge unit in the pipe using the luminescent indicator as a guide to center the system across the root gap. 5. Turn the BLUE gas hose on to inflate the bladders and purge the weld zone. 6. Always maintain a consistent flow rate during inflation, purging, and welding. 7. For sizes 2?-36?, BLUE gas hose should transfer inert gas at 30 SCFH (15 LPM) only. For sizes 38?-48?, BLUE gas hose should transfer inert gas at 60 SCFH (28.5 LPM) only. 8. Once a tight seal has been achieved, commence welding. 9. After the weld is complete, turn off the gas supply to deflate the bladders. Once the heat zone has sufficiently cooled, remove I-Purge X from the pipe. Be sure to disconnect all gas lines and monitoring equipment. 10. Clean I-Purge X and store in the provided carrying bag when it is not in use.

GBP 799.99
1

Aquasol I-Purge X Modular Inflatable Bladder System 965-1219mm

Aquasol I-Purge X Modular Inflatable Bladder System 965-1219mm

Achieve flawless welds with the Aquasol I-Purge X Modular Inflatable Bladder System, the industry's most advanced and versatile pipe purging solution. Designed to meet the needs of even the most demanding welding applications, the I-Purge X system delivers exceptional performance, unmatched versatility, and cost-saving benefits. Benefits Achieve consistently high-quality welds Reduce purge gas consumption and save money Minimise downtime with quick and easy setup Protect equipment from heat damage Enjoy long-lasting performance and versatility Features Bladder Expansion Technology (BET): Enables one unit to fit multiple pipe sizes, reducing your inventory and saving money Quick Connect Fittings: Snap-in place for easy assembly and disassembly, minimising downtime Extended Length, High Heat Resistant Harness: Allows bladders to be placed outside the heat-affected zone, protecting equipment and ensuring safety Reusable and Expandable: Built to last, with the ability to expand and fit multiple pipe specifications, maximising your investment. Application Pipe purging for welding Isolating valves and tanks Sealing pipe systems for servicing, cleaning, and inspection Instructions 1. Ensure I-Purge X is fully assembled (i.e., modules are securely connected to harness) 2. If necessary, connect rope, chain, or wire to the pull loops on the ends of the bladder modules. This will allow you easy insertion and removal of the system. 3. Connect inert gas lines to the BLUE and BLACK hoses. BLUE gas hose is required to inflate the purge bladders. BLACK gas hose is optional to expedite the purging process. 4. Position the purge unit in the pipe using the luminescent indicator as a guide to center the system across the root gap. 5. Turn the BLUE gas hose on to inflate the bladders and purge the weld zone. 6. Always maintain a consistent flow rate during inflation, purging, and welding. 7. For sizes 2?-36?, the BLUE gas hose should transfer inert gas at 30 SCFH (15 LPM) only. For sizes 38?-48?, the BLUE gas hose should transfer inert gas at 60 SCFH (28.5 LPM) only. 8. Once a tight seal has been achieved, commence welding. 9. After the weld is complete, turn off the gas supply to deflate the bladders. Once the heat zone has sufficiently cooled, remove I-Purge X from the pipe. Be sure to disconnect all gas lines and monitoring equipment. 10. Clean I-Purge X and store in the provided carrying bag when it is not in use.

GBP 3399.99
1

Aquasol I-Purge X Modular Inflatable Bladder System 356-457mm

Aquasol I-Purge X Modular Inflatable Bladder System 356-457mm

Achieve flawless welds with the Aquasol I-Purge X Modular Inflatable Bladder System, the industry's most advanced and versatile pipe purging solution. Designed to meet the needs of even the most demanding welding applications, the I-Purge X system delivers exceptional performance, unmatched versatility, and cost-saving benefits. Benefits Achieve consistently high-quality welds Reduce purge gas consumption and save money Minimise downtime with quick and easy setup Protect equipment from heat damage Enjoy long-lasting performance and versatility Features Bladder Expansion Technology (BET): Enables one unit to fit multiple pipe sizes, reducing your inventory and saving money Quick Connect Fittings: Snap-in place for easy assembly and disassembly, minimising downtime Extended Length, High Heat Resistant Harness: Allows bladders to be placed outside the heat-affected zone, protecting equipment and ensuring safety Reusable and Expandable: Built to last, with the ability to expand and fit multiple pipe specifications, maximising your investment. Application Pipe purging for welding Isolating valves and tanks Sealing pipe systems for servicing, cleaning, and inspection Instructions 1. Ensure I-Purge X is fully assembled (i.e., modules are securely connected to harness) 2. If necessary, connect rope, chain, or wire to the pull loops on the ends of the bladder modules. This will allow you easy insertion and removal of the system. 3. Connect inert gas lines to the BLUE and BLACK hoses. BLUE gas hose is required to inflate the purge bladders. BLACK gas hose is optional to expedite the purging process. 4. Position the purge unit in the pipe using the luminescent indicator as a guide to center the system across the root gap. 5. Turn the BLUE gas hose on to inflate the bladders and purge the weld zone. 6. Always maintain a consistent flow rate during inflation, purging, and welding. 7. For sizes 2?-36?, BLUE gas hose should transfer inert gas at 30 SCFH (15 LPM) only. For sizes 38?-48?, BLUE gas hose should transfer inert gas at 60 SCFH (28.5 LPM) only. 8. Once a tight seal has been achieved, commence welding. 9. After the weld is complete, turn off the gas supply to deflate the bladders. Once the heat zone has sufficiently cooled, remove I-Purge X from the pipe. Be sure to disconnect all gas lines and monitoring equipment. 10. Clean I-Purge X and store in the provided carrying bag when it is not in use.

GBP 1399.99
1

Aquasol I-Purge X Modular Inflatable Bladder System 508-660mm

Aquasol I-Purge X Modular Inflatable Bladder System 508-660mm

Achieve flawless welds with the Aquasol I-Purge X Modular Inflatable Bladder System, the industry's most advanced and versatile pipe purging solution. Designed to meet the needs of even the most demanding welding applications, the I-Purge X system delivers exceptional performance, unmatched versatility, and cost-saving benefits. Benefits Achieve consistently high-quality welds Reduce purge gas consumption and save money Minimise downtime with quick and easy setup Protect equipment from heat damage Enjoy long-lasting performance and versatility Features Bladder Expansion Technology (BET): Enables one unit to fit multiple pipe sizes, reducing your inventory and saving money Quick Connect Fittings: Snap-in place for easy assembly and disassembly, minimising downtime Extended Length, High Heat Resistant Harness: Allows bladders to be placed outside the heat-affected zone, protecting equipment and ensuring safety Reusable and Expandable: Built to last, with the ability to expand and fit multiple pipe specifications, maximising your investment. Application Pipe purging for welding Isolating valves and tanks Sealing pipe systems for servicing, cleaning, and inspection Instructions 1. Ensure I-Purge X is fully assembled (i.e., modules are securely connected to harness) 2. If necessary, connect rope, chain, or wire to the pull loops on the ends of the bladder modules. This will allow you easy insertion and removal of the system. 3. Connect inert gas lines to the BLUE and BLACK hoses. BLUE gas hose is required to inflate the purge bladders. BLACK gas hose is optional to expedite the purging process. 4. Position the purge unit in the pipe using the luminescent indicator as a guide to center the system across the root gap. 5. Turn the BLUE gas hose on to inflate the bladders and purge the weld zone. 6. Always maintain a consistent flow rate during inflation, purging, and welding. 7. For sizes 2?-36?, BLUE gas hose should transfer inert gas at 30 SCFH (15 LPM) only. For sizes 38?-48?, BLUE gas hose should transfer inert gas at 60 SCFH (28.5 LPM) only. 8. Once a tight seal has been achieved, commence welding. 9. After the weld is complete, turn off the gas supply to deflate the bladders. Once the heat zone has sufficiently cooled, remove I-Purge X from the pipe. Be sure to disconnect all gas lines and monitoring equipment. 10. Clean I-Purge X and store in the provided carrying bag when it is not in use.

GBP 1639.99
1

Aquasol I-Purge X Modular Inflatable Bladder System 711-914mm

Aquasol I-Purge X Modular Inflatable Bladder System 711-914mm

Achieve flawless welds with the Aquasol I-Purge X Modular Inflatable Bladder System, the industry's most advanced and versatile pipe purging solution. Designed to meet the needs of even the most demanding welding applications, the I-Purge X system delivers exceptional performance, unmatched versatility, and cost-saving benefits. Benefits Achieve consistently high-quality welds Reduce purge gas consumption and save money Minimise downtime with quick and easy setup Protect equipment from heat damage Enjoy long-lasting performance and versatility Features Bladder Expansion Technology (BET): Enables one unit to fit multiple pipe sizes, reducing your inventory and saving money Quick Connect Fittings: Snap-in place for easy assembly and disassembly, minimising downtime Extended Length, High Heat Resistant Harness: Allows bladders to be placed outside the heat-affected zone, protecting equipment and ensuring safety Reusable and Expandable: Built to last, with the ability to expand and fit multiple pipe specifications, maximising your investment. Application Pipe purging for welding Isolating valves and tanks Sealing pipe systems for servicing, cleaning, and inspection Instructions 1. Ensure I-Purge X is fully assembled (i.e., modules are securely connected to harness) 2. If necessary, connect rope, chain, or wire to the pull loops on the ends of the bladder modules. This will allow you easy insertion and removal of the system. 3. Connect inert gas lines to the BLUE and BLACK hoses. BLUE gas hose is required to inflate the purge bladders. BLACK gas hose is optional to expedite the purging process. 4. Position the purge unit in the pipe using the luminescent indicator as a guide to center the system across the root gap. 5. Turn the BLUE gas hose on to inflate the bladders and purge the weld zone. 6. Always maintain a consistent flow rate during inflation, purging, and welding. 7. For sizes 2?-36?, BLUE gas hose should transfer inert gas at 30 SCFH (15 LPM) only. For sizes 38?-48?, BLUE gas hose should transfer inert gas at 60 SCFH (28.5 LPM) only. 8. Once a tight seal has been achieved, commence welding. 9. After the weld is complete, turn off the gas supply to deflate the bladders. Once the heat zone has sufficiently cooled, remove I-Purge X from the pipe. Be sure to disconnect all gas lines and monitoring equipment. 10. Clean I-Purge X and store in the provided carrying bag when it is not in use.

GBP 2299.99
1

Aquasol I-Purge X Modular Inflatable Bladder System 102-152mm

Aquasol I-Purge X Modular Inflatable Bladder System 102-152mm

Achieve flawless welds with the Aquasol I-Purge X Modular Inflatable Bladder System, the industry's most advanced and versatile pipe purging solution. Designed to meet the needs of even the most demanding welding applications, the I-Purge X system delivers exceptional performance, unmatched versatility, and cost-saving benefits. Benefits Achieve consistently high-quality welds Reduce purge gas consumption and save money Minimise downtime with quick and easy setup Protect equipment from heat damage Enjoy long-lasting performance and versatility Features Bladder Expansion Technology (BET): Enables one unit to fit multiple pipe sizes, reducing your inventory and saving money Quick Connect Fittings: Snap-in place for easy assembly and disassembly, minimising downtime Extended Length, High Heat Resistant Harness: Allows bladders to be placed outside the heat-affected zone, protecting equipment and ensuring safety Reusable and Expandable: Built to last, with the ability to expand and fit multiple pipe specifications, maximising your investment. Application Pipe purging for welding Isolating valves and tanks Sealing pipe systems for servicing, cleaning, and inspection Instructions 1. Ensure I-Purge X is fully assembled (i.e., modules are securely connected to harness). 2. If necessary, connect rope, chain, or wire to the pull loops on the ends of the bladder modules. This will allow you easy insertion and removal of the system. 3. Connect inert gas lines to the BLUE and BLACK hoses. BLUE gas hose is required to inflate the purge bladders. BLACK gas hose is optional to expedite the purging process. 4. Position the purge unit in the pipe using the luminescent indicator as a guide to center the system across the root gap. 5. Turn the BLUE gas hose on to inflate the bladders and purge the weld zone. 6. Always maintain a consistent flow rate during inflation, purging, and welding. 7. For sizes 2?-36?, BLUE gas hose should transfer inert gas at 30 SCFH (15 LPM) only. For sizes 38?-48?, BLUE gas hose should transfer inert gas at 60 SCFH (28.5 LPM) only. 8. Once a tight seal has been achieved, commence welding. 9. After the weld is complete, turn off the gas supply to deflate the bladders. Once the heat zone has sufficiently cooled, remove I-Purge X from the pipe. Be sure to disconnect all gas lines and monitoring equipment. 10. Clean I-Purge X and store in the provided carrying bag when it is not in use.

GBP 999.99
1

Aquasol I-Purge X Modular Inflatable Bladder System 203-305mm

Aquasol I-Purge X Modular Inflatable Bladder System 203-305mm

Achieve flawless welds with the Aquasol I-Purge X Modular Inflatable Bladder System, the industry's most advanced and versatile pipe purging solution. Designed to meet the needs of even the most demanding welding applications, the I-Purge X system delivers exceptional performance, unmatched versatility, and cost-saving benefits. Benefits Achieve consistently high-quality welds Reduce purge gas consumption and save money Minimise downtime with quick and easy setup Protect equipment from heat damage Enjoy long-lasting performance and versatility Features Bladder Expansion Technology (BET): Enables one unit to fit multiple pipe sizes, reducing your inventory and saving money Quick Connect Fittings: Snap-in place for easy assembly and disassembly, minimising downtime Extended Length, High Heat Resistant Harness: Allows bladders to be placed outside the heat-affected zone, protecting equipment and ensuring safety Reusable and Expandable: Built to last, with the ability to expand and fit multiple pipe specifications, maximising your investment. Application Pipe purging for welding Isolating valves and tanks Sealing pipe systems for servicing, cleaning, and inspection Instructions 1. Ensure I-Purge X is fully assembled (i.e., modules are securely connected to harness) 2. If necessary, connect rope, chain, or wire to the pull loops on the ends of the bladder modules. This will allow you easy insertion and removal of the system. 3. Connect inert gas lines to the BLUE and BLACK hoses. BLUE gas hose is required to inflate the purge bladders. BLACK gas hose is optional to expedite the purging process. 4. Position the purge unit in the pipe using the luminescent indicator as a guide to center the system across the root gap. 5. Turn the BLUE gas hose on to inflate the bladders and purge the weld zone. 6. Always maintain a consistent flow rate during inflation, purging, and welding. 7. For sizes 2?-36?, the BLUE gas hose should transfer inert gas at 30 SCFH (15 LPM) only. For sizes 38?-48?, the BLUE gas hose should transfer inert gas at 60 SCFH (28.5 LPM) only. 8. Once a tight seal has been achieved, commence welding. 9. After the weld is complete, turn off the gas supply to deflate the bladders. Once the heat zone has sufficiently cooled, remove I-Purge X from the pipe. Be sure to disconnect all gas lines and monitoring equipment. 10. Clean I-Purge X and store in the provided carrying bag when it is not in use.

GBP 1099.99
1

Aquasol I-Purge X Modular Inflatable Bladder System 1270-1473mm

Aquasol I-Purge X Modular Inflatable Bladder System 1270-1473mm

Achieve flawless welds with the Aquasol I-Purge X Modular Inflatable Bladder System, the industry's most advanced and versatile pipe purging solution. Designed to meet the needs of even the most demanding welding applications, the I-Purge X system delivers exceptional performance, unmatched versatility, and cost-saving benefits. Benefits Achieve consistently high-quality welds Reduce purge gas consumption and save money Minimise downtime with quick and easy setup Protect equipment from heat damage Enjoy long-lasting performance and versatility Features Bladder Expansion Technology (BET): Enables one unit to fit multiple pipe sizes, reducing your inventory and saving money Quick Connect Fittings: Snap-in place for easy assembly and disassembly, minimising downtime Extended Length, High Heat Resistant Harness: Allows bladders to be placed outside the heat-affected zone, protecting equipment and ensuring safety Reusable and Expandable: Built to last, with the ability to expand and fit multiple pipe specifications, maximising your investment. Application Pipe purging for welding Isolating valves and tanks Sealing pipe systems for servicing, cleaning, and inspection Instructions 1. Ensure I-Purge X is fully assembled (i.e., modules are securely connected to harness) 2. If necessary, connect rope, chain, or wire to the pull loops on the ends of the bladder modules. This will allow you easy insertion and removal of the system. 3. Connect inert gas lines to the BLUE and BLACK hoses. BLUE gas hose is required to inflate the purge bladders. BLACK gas hose is optional to expedite the purging process. 4. Position the purge unit in the pipe using the luminescent indicator as a guide to center the system across the root gap. 5. Turn the BLUE gas hose on to inflate the bladders and purge the weld zone. 6. Always maintain a consistent flow rate during inflation, purging, and welding. 7. For sizes 2?-36?, the BLUE gas hose should transfer inert gas at 30 SCFH (15 LPM) only. For sizes 38?-48?, the BLUE gas hose should transfer inert gas at 60 SCFH (28.5 LPM) only. 8. Once a tight seal has been achieved, commence welding. 9. After the weld is complete, turn off the gas supply to deflate the bladders. Once the heat zone has sufficiently cooled, remove I-Purge X from the pipe. Be sure to disconnect all gas lines and monitoring equipment. 10. Clean I-Purge X and store in the provided carrying bag when it is not in use.

GBP 4699.99
1

Aquasol EZ Purge Pre-formed Self-Adhesive Water Soluble Purge Dams Multipack 19mm (Pack of 5000)

Aquasol EZ Purge Pre-formed Self-Adhesive Water Soluble Purge Dams Multipack 19mm (Pack of 5000)

Introducing Aquasol EZ Purge, the revolutionary pre-formed, self-adhesive water soluble purge dams that are transforming TIG welding. EZ Purge eliminates the need for time-consuming and error-prone manual purge dam construction, saving you valuable time and labour costs. Made from a unique water soluble material, EZ Purge creates an airtight seal that protects your welds from contamination while providing exceptional gas retention. Benefits Saves time and labour Improves weld quality Reduces gas consumption Environmentally friendly 100% bio-degradable Features Pre-formed for quick and easy installation Self-adhesive for a secure fit Water soluble for hassle-free removal Tapered side walls to fit a variety of pipe schedules Flat design for even gas distribution Available in a wide range of sizes to suit your needs Application TIG welding of stainless steel and aluminium pipes Nuclear, petrochemical, and food and beverage industries Any application where weld quality is critical Instructions 1. Peel liner off outer circumference of dam to fully expose adhesive, keeping it away from contaminants and debris 2. Align adhesive edges to the inside pipe wall and insert dam to desired location. 3. Thoroughly press adhesive on circumference of dam along inside of pipe wall to create even seal 4. Moisten an ordinary sponge with water, squeeze out excess water until sponge is damp. Lightly dab sponge along Aquasol Water Soluble Tape portion of dam. The dampened sponge will reactivate the adhesive to ensure zero air permeability. For Sizes above 56 (1422 mm), inquire for directions.

GBP 19999.99
1

Aquasol EZ Purge Pre-formed Self-Adhesive Water Soluble Purge Dams Multipack 19mm (Pack of 500)

Aquasol EZ Purge Pre-formed Self-Adhesive Water Soluble Purge Dams Multipack 19mm (Pack of 500)

Introducing Aquasol EZ Purge, the revolutionary pre-formed, self-adhesive water soluble purge dams that are transforming TIG welding. EZ Purge eliminates the need for time-consuming and error-prone manual purge dam construction, saving you valuable time and labour costs. Made from a unique water soluble material, EZ Purge creates an airtight seal that protects your welds from contamination while providing exceptional gas retention. Benefits Saves time and labour Improves weld quality Reduces gas consumption Environmentally friendly 100% bio-degradable Features Pre-formed for quick and easy installation Self-adhesive for a secure fit Water soluble for hassle-free removal Tapered side walls to fit a variety of pipe schedules Flat design for even gas distribution Available in a wide range of sizes to suit your needs Application TIG welding of stainless steel and aluminium pipes Nuclear, petrochemical, and food and beverage industries Any application where weld quality is critical Instructions 1. Peel liner off outer circumference of dam to fully expose adhesive, keeping it away from contaminants and debris 2. Align adhesive edges to the inside pipe wall and insert dam to desired location. 3. Thoroughly press adhesive on circumference of dam along inside of pipe wall to create even seal 4. Moisten an ordinary sponge with water, squeeze out excess water until sponge is damp. Lightly dab sponge along Aquasol Water Soluble Tape portion of dam. The dampened sponge will reactivate the adhesive to ensure zero air permeability. For Sizes above 56 (1422 mm), inquire for directions.

GBP 4299.99
1

Aquasol EZ Purge Pre-formed Self-Adhesive Water Soluble Purge Dams Multipack 356mm (Pack of 24)

Aquasol EZ Purge Pre-formed Self-Adhesive Water Soluble Purge Dams Multipack 356mm (Pack of 24)

Introducing Aquasol EZ Purge, the revolutionary pre-formed, self-adhesive water soluble purge dams that are transforming TIG welding. EZ Purge eliminates the need for time-consuming and error-prone manual purge dam construction, saving you valuable time and labour costs. Made from a unique water soluble material, EZ Purge creates an airtight seal that protects your welds from contamination while providing exceptional gas retention. Benefits Saves time and labour Improves weld quality Reduces gas consumption Environmentally friendly 100% bio-degradable Features Pre-formed for quick and easy installation Self-adhesive for a secure fit Water soluble for hassle-free removal Tapered side walls to fit a variety of pipe schedules Flat design for even gas distribution Available in a wide range of sizes to suit your needs Application TIG welding of stainless steel and aluminium pipes Nuclear, petrochemical, and food and beverage industries Any application where weld quality is critical Instructions 1. Peel liner off outer circumference of dam to fully expose adhesive, keeping it away from contaminants and debris 2. Align adhesive edges to the inside pipe wall and insert dam to desired location. 3. Thoroughly press adhesive on circumference of dam along inside of pipe wall to create even seal 4. Moisten an ordinary sponge with water, squeeze out excess water until sponge is damp. Lightly dab sponge along Aquasol Water Soluble Tape portion of dam. The dampened sponge will reactivate the adhesive to ensure zero air permeability. For Sizes above 56 (1422 mm), inquire for directions.

GBP 999.99
1

Aquasol EZ Purge Pre-formed Self-Adhesive Water Soluble Purge Dams Multipack 102mm (Pack of 48)

Aquasol EZ Purge Pre-formed Self-Adhesive Water Soluble Purge Dams Multipack 102mm (Pack of 48)

Introducing Aquasol EZ Purge, the revolutionary pre-formed, self-adhesive water soluble purge dams that are transforming TIG welding. EZ Purge eliminates the need for time-consuming and error-prone manual purge dam construction, saving you valuable time and labour costs. Made from a unique water soluble material, EZ Purge creates an airtight seal that protects your welds from contamination while providing exceptional gas retention. Benefits Saves time and labour Improves weld quality Reduces gas consumption Environmentally friendly 100% bio-degradable Features Pre-formed for quick and easy installation Self-adhesive for a secure fit Water soluble for hassle-free removal Tapered side walls to fit a variety of pipe schedules Flat design for even gas distribution Available in a wide range of sizes to suit your needs Application TIG welding of stainless steel and aluminium pipes Nuclear, petrochemical, and food and beverage industries Any application where weld quality is critical Instructions 1. Peel liner off outer circumference of dam to fully expose adhesive, keeping it away from contaminants and debris 2. Align adhesive edges to the inside pipe wall and insert dam to desired location. 3. Thoroughly press adhesive on circumference of dam along inside of pipe wall to create even seal 4. Moisten an ordinary sponge with water, squeeze out excess water until sponge is damp. Lightly dab sponge along Aquasol Water Soluble Tape portion of dam. The dampened sponge will reactivate the adhesive to ensure zero air permeability. For Sizes above 56 (1422 mm), inquire for directions.

GBP 539.99
1

Aquasol EZ Purge Pre-formed Self-Adhesive Water Soluble Purge Dams Multipack 813mm (Pack of 24)

Aquasol EZ Purge Pre-formed Self-Adhesive Water Soluble Purge Dams Multipack 813mm (Pack of 24)

Introducing Aquasol EZ Purge, the revolutionary pre-formed, self-adhesive water soluble purge dams that are transforming TIG welding. EZ Purge eliminates the need for time-consuming and error-prone manual purge dam construction, saving you valuable time and labour costs. Made from a unique water soluble material, EZ Purge creates an airtight seal that protects your welds from contamination while providing exceptional gas retention. Benefits Saves time and labour Improves weld quality Reduces gas consumption Environmentally friendly 100% bio-degradable Features Pre-formed for quick and easy installation Self-adhesive for a secure fit Water soluble for hassle-free removal Tapered side walls to fit a variety of pipe schedules Flat design for even gas distribution Available in a wide range of sizes to suit your needs Application TIG welding of stainless steel and aluminium pipes Nuclear, petrochemical, and food and beverage industries Any application where weld quality is critical Instructions 1. Peel liner off outer circumference of dam to fully expose adhesive, keeping it away from contaminants and debris 2. Align adhesive edges to the inside pipe wall and insert dam to desired location. 3. Thoroughly press adhesive on circumference of dam along inside of pipe wall to create even seal 4. Moisten an ordinary sponge with water, squeeze out excess water until sponge is damp. Lightly dab sponge along Aquasol Water Soluble Tape portion of dam. The dampened sponge will reactivate the adhesive to ensure zero air permeability. For Sizes above 56 (1422 mm), inquire for directions.

GBP 5999.99
1

Aquasol EZ Purge Pre-formed Self-Adhesive Water Soluble Purge Dams Multipack 25mm (Pack of 500)

Aquasol EZ Purge Pre-formed Self-Adhesive Water Soluble Purge Dams Multipack 25mm (Pack of 500)

Introducing Aquasol EZ Purge, the revolutionary pre-formed, self-adhesive water soluble purge dams that are transforming TIG welding. EZ Purge eliminates the need for time-consuming and error-prone manual purge dam construction, saving you valuable time and labour costs. Made from a unique water soluble material, EZ Purge creates an airtight seal that protects your welds from contamination while providing exceptional gas retention. Benefits Saves time and labour Improves weld quality Reduces gas consumption Environmentally friendly 100% bio-degradable Features Pre-formed for quick and easy installation Self-adhesive for a secure fit Water soluble for hassle-free removal Tapered side walls to fit a variety of pipe schedules Flat design for even gas distribution Available in a wide range of sizes to suit your needs Application TIG welding of stainless steel and aluminium pipes Nuclear, petrochemical, and food and beverage industries Any application where weld quality is critical Instructions 1. Peel liner off outer circumference of dam to fully expose adhesive, keeping it away from contaminants and debris 2. Align adhesive edges to the inside pipe wall and insert dam to desired location. 3. Thoroughly press adhesive on circumference of dam along inside of pipe wall to create even seal 4. Moisten an ordinary sponge with water, squeeze out excess water until sponge is damp. Lightly dab sponge along Aquasol Water Soluble Tape portion of dam. The dampened sponge will reactivate the adhesive to ensure zero air permeability. For sizes above 56 (1422 mm), inquire for directions.

GBP 4299.99
1

Aquasol EZ Purge Pre-formed Self-Adhesive Water Soluble Purge Dams Multipack 13mm (Pack of 5000)

Aquasol EZ Purge Pre-formed Self-Adhesive Water Soluble Purge Dams Multipack 13mm (Pack of 5000)

Introducing Aquasol EZ Purge, the revolutionary pre-formed, self-adhesive water soluble purge dams that are transforming TIG welding. EZ Purge eliminates the need for time-consuming and error-prone manual purge dam construction, saving you valuable time and labour costs. Made from a unique water soluble material, EZ Purge creates an airtight seal that protects your welds from contamination while providing exceptional gas retention. Benefits Saves time and labour Improves weld quality Reduces gas consumption Environmentally friendly 100% bio-degradable Features Pre-formed for quick and easy installation Self-adhesive for a secure fit Water soluble for hassle-free removal Tapered side walls to fit a variety of pipe schedules Flat design for even gas distribution Available in a wide range of sizes to suit your needs Application TIG welding of stainless steel and aluminium pipes Nuclear, petrochemical, and food and beverage industries Any application where weld quality is critical Instructions 1. Peel liner off outer circumference of dam to fully expose adhesive, keeping it away from contaminants and debris 2. Align adhesive edges to the inside pipe wall and insert dam to desired location. 3. Thoroughly press adhesive on circumference of dam along inside of pipe wall to create even seal 4. Moisten an ordinary sponge with water, squeeze out excess water until sponge is damp. Lightly dab sponge along Aquasol Water Soluble Tape portion of dam. The dampened sponge will reactivate the adhesive to ensure zero air permeability. For Sizes above 56 (1422 mm), inquire for directions.

GBP 19999.99
1

Aquasol EZ Purge Pre-formed Self-Adhesive Water Soluble Purge Dams Multipack 51mm (Pack of 192)

Aquasol EZ Purge Pre-formed Self-Adhesive Water Soluble Purge Dams Multipack 51mm (Pack of 192)

Introducing Aquasol EZ Purge, the revolutionary pre-formed, self-adhesive water soluble purge dams that are transforming TIG welding. EZ Purge eliminates the need for time-consuming and error-prone manual purge dam construction, saving you valuable time and labour costs. Made from a unique water soluble material, EZ Purge creates an airtight seal that protects your welds from contamination while providing exceptional gas retention. Benefits Saves time and labour Improves weld quality Reduces gas consumption Environmentally friendly 100% bio-degradable Features Pre-formed for quick and easy installation Self-adhesive for a secure fit Water soluble for hassle-free removal Tapered side walls to fit a variety of pipe schedules Flat design for even gas distribution Available in a wide range of sizes to suit your needs Application TIG welding of stainless steel and aluminium pipes Nuclear, petrochemical, and food and beverage industries Any application where weld quality is critical Instructions 1. Peel liner off outer circumference of dam to fully expose adhesive, keeping it away from contaminants and debris 2. Align adhesive edges to the inside pipe wall and insert dam to desired location. 3. Thoroughly press adhesive on circumference of dam along inside of pipe wall to create even seal 4. Moisten an ordinary sponge with water, squeeze out excess water until sponge is damp. Lightly dab sponge along Aquasol Water Soluble Tape portion of dam. The dampened sponge will reactivate the adhesive to ensure zero air permeability. For Sizes above 56 (1422 mm), inquire for directions.

GBP 1339.99
1

Aquasol EZ Purge Pre-formed Non-Adhesive Water Soluble Purge Dams Multipack 13mm (Pack of 5000)

Aquasol EZ Purge Pre-formed Non-Adhesive Water Soluble Purge Dams Multipack 13mm (Pack of 5000)

Introducing Aquasol EZ Purge, the revolutionary pre-formed, self-adhesive water soluble purge dams that are transforming TIG welding. EZ Purge eliminates the need for time-consuming and error-prone manual purge dam construction, saving you valuable time and labour costs. Made from a unique water soluble material, EZ Purge creates an airtight seal that protects your welds from contamination while providing exceptional gas retention. Benefits Saves time and labour Improves weld quality Reduces gas consumption Environmentally friendly 100% bio-degradable Features Pre-formed for quick and easy installation Self-adhesive for a secure fit Water soluble for hassle-free removal Tapered side walls to fit a variety of pipe schedules Flat design for even gas distribution Available in a wide range of sizes to suit your needs Application TIG welding of stainless steel and aluminium pipes Nuclear, petrochemical, and food and beverage industries Any application where weld quality is critical Instructions 1. Peel liner off outer circumference of dam to fully expose adhesive, keeping it away from contaminants and debris 2. Align adhesive edges to the inside pipe wall and insert dam to desired location. 3. Thoroughly press adhesive on circumference of dam along inside of pipe wall to create even seal 4. Moisten an ordinary sponge with water, squeeze out excess water until sponge is damp. Lightly dab sponge along Aquasol Water Soluble Tape portion of dam. The dampened sponge will reactivate the adhesive to ensure zero air permeability. For sizes above 56 (1422 mm), inquire for directions.

GBP 19999.99
1

Aquasol EZ Purge Pre-formed Self-Adhesive Water Soluble Purge Dams Multipack 914mm (Pack of 24)

Aquasol EZ Purge Pre-formed Self-Adhesive Water Soluble Purge Dams Multipack 914mm (Pack of 24)

Introducing Aquasol EZ Purge, the revolutionary pre-formed, self-adhesive water soluble purge dams that are transforming TIG welding. EZ Purge eliminates the need for time-consuming and error-prone manual purge dam construction, saving you valuable time and labour costs. Made from a unique water soluble material, EZ Purge creates an airtight seal that protects your welds from contamination while providing exceptional gas retention. Benefits Saves time and labour Improves weld quality Reduces gas consumption Environmentally friendly 100% bio-degradable Features Pre-formed for quick and easy installation Self-adhesive for a secure fit Water soluble for hassle-free removal Tapered side walls to fit a variety of pipe schedules Flat design for even gas distribution Available in a wide range of sizes to suit your needs Application TIG welding of stainless steel and aluminium pipes Nuclear, petrochemical, and food and beverage industries Any application where weld quality is critical Instructions 1. Peel liner off outer circumference of dam to fully expose adhesive, keeping it away from contaminants and debris 2. Align adhesive edges to the inside pipe wall and insert dam to desired location. 3. Thoroughly press adhesive on circumference of dam along inside of pipe wall to create even seal 4. Moisten an ordinary sponge with water, squeeze out excess water until sponge is damp. Lightly dab sponge along Aquasol Water Soluble Tape portion of dam. The dampened sponge will reactivate the adhesive to ensure zero air permeability. For Sizes above 56 (1422 mm), inquire for directions.

GBP 7999.99
1

Aquasol EZ Purge Pre-formed Self-Adhesive Water Soluble Purge Dams Multipack 660mm (Pack of 24)

Aquasol EZ Purge Pre-formed Self-Adhesive Water Soluble Purge Dams Multipack 660mm (Pack of 24)

Introducing Aquasol EZ Purge, the revolutionary pre-formed, self-adhesive water soluble purge dams that are transforming TIG welding. EZ Purge eliminates the need for time-consuming and error-prone manual purge dam construction, saving you valuable time and labour costs. Made from a unique water soluble material, EZ Purge creates an airtight seal that protects your welds from contamination while providing exceptional gas retention. Benefits Saves time and labour Improves weld quality Reduces gas consumption Environmentally friendly 100% bio-degradable Features Pre-formed for quick and easy installation Self-adhesive for a secure fit Water soluble for hassle-free removal Tapered side walls to fit a variety of pipe schedules Flat design for even gas distribution Available in a wide range of sizes to suit your needs Application TIG welding of stainless steel and aluminium pipes Nuclear, petrochemical, and food and beverage industries Any application where weld quality is critical Instructions 1. Peel liner off outer circumference of dam to fully expose adhesive, keeping it away from contaminants and debris 2. Align adhesive edges to the inside pipe wall and insert dam to desired location. 3. Thoroughly press adhesive on circumference of dam along inside of pipe wall to create even seal 4. Moisten an ordinary sponge with water, squeeze out excess water until sponge is damp. Lightly dab sponge along Aquasol Water Soluble Tape portion of dam. The dampened sponge will reactivate the adhesive to ensure zero air permeability. For Sizes above 56 (1422 mm), inquire for directions.

GBP 3399.99
1

Aquasol EZ Purge Pre-formed Self-Adhesive Water Soluble Purge Dams Multipack 32mm (Pack of 500)

Aquasol EZ Purge Pre-formed Self-Adhesive Water Soluble Purge Dams Multipack 32mm (Pack of 500)

Introducing Aquasol EZ Purge, the revolutionary pre-formed, self-adhesive water soluble purge dams that are transforming TIG welding. EZ Purge eliminates the need for time-consuming and error-prone manual purge dam construction, saving you valuable time and labour costs. Made from a unique water soluble material, EZ Purge creates an airtight seal that protects your welds from contamination while providing exceptional gas retention. Benefits Saves time and labour Improves weld quality Reduces gas consumption Environmentally friendly 100% bio-degradable Features Pre-formed for quick and easy installation Self-adhesive for a secure fit Water soluble for hassle-free removal Tapered side walls to fit a variety of pipe schedules Flat design for even gas distribution Available in a wide range of sizes to suit your needs Application TIG welding of stainless steel and aluminium pipes Nuclear, petrochemical, and food and beverage industries Any application where weld quality is critical Instructions 1. Peel liner off outer circumference of dam to fully expose adhesive, keeping it away from contaminants and debris 2. Align adhesive edges to the inside pipe wall and insert dam to desired location. 3. Thoroughly press adhesive on circumference of dam along inside of pipe wall to create even seal 4. Moisten an ordinary sponge with water, squeeze out excess water until sponge is damp. Lightly dab sponge along Aquasol Water Soluble Tape portion of dam. The dampened sponge will reactivate the adhesive to ensure zero air permeability. For Sizes above 56 (1422 mm), inquire for directions.

GBP 4299.99
1

Aquasol EZ Purge Pre-formed Non-Adhesive Water Soluble Purge Dams Multipack 32mm (Pack of 500)

Aquasol EZ Purge Pre-formed Non-Adhesive Water Soluble Purge Dams Multipack 32mm (Pack of 500)

Introducing Aquasol EZ Purge, the revolutionary pre-formed, self-adhesive water soluble purge dams that are transforming TIG welding. EZ Purge eliminates the need for time-consuming and error-prone manual purge dam construction, saving you valuable time and labour costs. Made from a unique water soluble material, EZ Purge creates an airtight seal that protects your welds from contamination while providing exceptional gas retention. Benefits Saves time and labour Improves weld quality Reduces gas consumption Environmentally friendly 100% bio-degradable Features Pre-formed for quick and easy installation Self-adhesive for a secure fit Water soluble for hassle-free removal Tapered side walls to fit a variety of pipe schedules Flat design for even gas distribution Available in a wide range of sizes to suit your needs Application TIG welding of stainless steel and aluminium pipes Nuclear, petrochemical, and food and beverage industries Any application where weld quality is critical Instructions 1. Peel liner off outer circumference of dam to fully expose adhesive, keeping it away from contaminants and debris 2. Align adhesive edges to the inside pipe wall and insert dam to desired location. 3. Thoroughly press adhesive on circumference of dam along inside of pipe wall to create even seal 4. Moisten an ordinary sponge with water, squeeze out excess water until sponge is damp. Lightly dab sponge along Aquasol Water Soluble Tape portion of dam. The dampened sponge will reactivate the adhesive to ensure zero air permeability. For sizes above 56 (1422 mm), inquire for directions.

GBP 4299.99
1

Aquasol EZ Purge Pre-formed Self-Adhesive Water Soluble Purge Dams Multipack 127mm (Pack of 48)

Aquasol EZ Purge Pre-formed Self-Adhesive Water Soluble Purge Dams Multipack 127mm (Pack of 48)

Introducing Aquasol EZ Purge, the revolutionary pre-formed, self-adhesive water soluble purge dams that are transforming TIG welding. EZ Purge eliminates the need for time-consuming and error-prone manual purge dam construction, saving you valuable time and labour costs. Made from a unique water soluble material, EZ Purge creates an airtight seal that protects your welds from contamination while providing exceptional gas retention. Benefits Saves time and labour Improves weld quality Reduces gas consumption Environmentally friendly 100% bio-degradable Features Pre-formed for quick and easy installation Self-adhesive for a secure fit Water soluble for hassle-free removal Tapered side walls to fit a variety of pipe schedules Flat design for even gas distribution Available in a wide range of sizes to suit your needs Application TIG welding of stainless steel and aluminium pipes Nuclear, petrochemical, and food and beverage industries Any application where weld quality is critical Instructions 1. Peel liner off outer circumference of dam to fully expose adhesive, keeping it away from contaminants and debris 2. Align adhesive edges to the inside pipe wall and insert dam to desired location. 3. Thoroughly press adhesive on circumference of dam along inside of pipe wall to create even seal 4. Moisten an ordinary sponge with water, squeeze out excess water until sponge is damp. Lightly dab sponge along Aquasol Water Soluble Tape portion of dam. The dampened sponge will reactivate the adhesive to ensure zero air permeability. For Sizes above 56 (1422 mm), inquire for directions.

GBP 799.99
1

Aquasol EZ Purge Pre-formed Self-Adhesive Water Soluble Purge Dams Multipack 38mm (Pack of 500)

Aquasol EZ Purge Pre-formed Self-Adhesive Water Soluble Purge Dams Multipack 38mm (Pack of 500)

Introducing Aquasol EZ Purge, the revolutionary pre-formed, self-adhesive water soluble purge dams that are transforming TIG welding. EZ Purge eliminates the need for time-consuming and error-prone manual purge dam construction, saving you valuable time and labour costs. Made from a unique water soluble material, EZ Purge creates an airtight seal that protects your welds from contamination while providing exceptional gas retention. Benefits Saves time and labour Improves weld quality Reduces gas consumption Environmentally friendly 100% bio-degradable Features Pre-formed for quick and easy installation Self-adhesive for a secure fit Water soluble for hassle-free removal Tapered side walls to fit a variety of pipe schedules Flat design for even gas distribution Available in a wide range of sizes to suit your needs Application TIG welding of stainless steel and aluminium pipes Nuclear, petrochemical, and food and beverage industries Any application where weld quality is critical Instructions 1. Peel liner off outer circumference of dam to fully expose adhesive, keeping it away from contaminants and debris 2. Align adhesive edges to the inside pipe wall and insert dam to desired location. 3. Thoroughly press adhesive on circumference of dam along inside of pipe wall to create even seal 4. Moisten an ordinary sponge with water, squeeze out excess water until sponge is damp. Lightly dab sponge along Aquasol Water Soluble Tape portion of dam. The dampened sponge will reactivate the adhesive to ensure zero air permeability. For Sizes above 56 (1422 mm), inquire for directions.

GBP 4299.99
1

Aquasol EZ Purge Pre-formed Self-Adhesive Water Soluble Purge Dams Multipack 76mm (Pack of 192)

Aquasol EZ Purge Pre-formed Self-Adhesive Water Soluble Purge Dams Multipack 76mm (Pack of 192)

Introducing Aquasol EZ Purge, the revolutionary pre-formed, self-adhesive water soluble purge dams that are transforming TIG welding. EZ Purge eliminates the need for time-consuming and error-prone manual purge dam construction, saving you valuable time and labour costs. Made from a unique water soluble material, EZ Purge creates an airtight seal that protects your welds from contamination while providing exceptional gas retention. Benefits Saves time and labour Improves weld quality Reduces gas consumption Environmentally friendly 100% bio-degradable Features Pre-formed for quick and easy installation Self-adhesive for a secure fit Water soluble for hassle-free removal Tapered side walls to fit a variety of pipe schedules Flat design for even gas distribution Available in a wide range of sizes to suit your needs Application TIG welding of stainless steel and aluminium pipes Nuclear, petrochemical, and food and beverage industries Any application where weld quality is critical Instructions 1. Peel liner off outer circumference of dam to fully expose adhesive, keeping it away from contaminants and debris 2. Align adhesive edges to the inside pipe wall and insert dam to desired location. 3. Thoroughly press adhesive on circumference of dam along inside of pipe wall to create even seal 4. Moisten an ordinary sponge with water, squeeze out excess water until sponge is damp. Lightly dab sponge along Aquasol Water Soluble Tape portion of dam. The dampened sponge will reactivate the adhesive to ensure zero air permeability. For Sizes above 56 (1422 mm), inquire for directions.

GBP 1699.99
1

Aquasol EZ Purge Pre-formed Non-Adhesive Water Soluble Purge Dams Multipack 25mm (Pack of 5000)

Aquasol EZ Purge Pre-formed Non-Adhesive Water Soluble Purge Dams Multipack 25mm (Pack of 5000)

Introducing Aquasol EZ Purge, the revolutionary pre-formed, self-adhesive water soluble purge dams that are transforming TIG welding. EZ Purge eliminates the need for time-consuming and error-prone manual purge dam construction, saving you valuable time and labour costs. Made from a unique water soluble material, EZ Purge creates an airtight seal that protects your welds from contamination while providing exceptional gas retention. Benefits Saves time and labour Improves weld quality Reduces gas consumption Environmentally friendly 100% bio-degradable Features Pre-formed for quick and easy installation Self-adhesive for a secure fit Water soluble for hassle-free removal Tapered side walls to fit a variety of pipe schedules Flat design for even gas distribution Available in a wide range of sizes to suit your needs Application TIG welding of stainless steel and aluminium pipes Nuclear, petrochemical, and food and beverage industries Any application where weld quality is critical Instructions 1. Peel liner off outer circumference of dam to fully expose adhesive, keeping it away from contaminants and debris. 2. Align adhesive edges to the inside pipe wall and insert dam to desired location. 3. Thoroughly press adhesive on circumference of dam along inside of pipe wall to create even seal. 4. Moisten an ordinary sponge with water, squeeze out excess water until sponge is damp. Lightly dab sponge along Aquasol Water Soluble Tape portion of dam. The dampened sponge will reactivate the adhesive to ensure zero air permeability. For sizes above 56 (1422 mm), inquire for directions.

GBP 19999.99
1