134 results (0,13635 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Apollo Blank XPert Card for XPander Wireless Range - White 29600-413

Apollo Blank XPert Card for XPander Wireless Range - White 29600-413

Apollo Blank XPert Card for XPander Wireless Range - White 29600-413The 29600-413 is a spare singular blank XPERT card in white which has been designed for use with the XPander range. XPander incorporates entirely new designs with respect to the wireless communication system. A Radio Interface is connected to the loop.XPander incorporates entirely new designs with respect to the wireless communication system. A Radio Interface is connected to the loop. It communicates with the control panel using the Apollo addressable two-wire power and communications system. The interface communicates with the detection and alarm signalling devices by means of radio waves. The detectors are multistate in that they report normal pre-alarm fire or fault states to the radio base which transmits the information to the interface. The detectors incorporate drift compensation and report any compensation limit occurring. The radio bases and signalling devices are addressable and use a pre-set analogue value to report via the XP95 or Discovery protocol. Apart from normal and fire the bases can send pre-set analogue values to indicate low battery detector contaminated detector tamper and low signal strength fault conditions.Key FeaturesSimplifies and speeds up installation and commissioningAddress remains the same no matter how often detectors are replacedUses patented proven technologyFlexibility to create any address

GBP 0.20
1

Apollo Blank XPert Card for XPander Wireless Range -Red 29600-399

Apollo Blank XPert Card for XPander Wireless Range -Red 29600-399

Apollo Blank XPert Card for XPander Wireless Range RedSpare singular blank XPERT card in red for the XPander range. XPander incorporates entirely new designs with respect to the wireless communication system. A Radio Interface is connected to the loop.XPander incorporates entirely new designs with respect to the wireless communication system. A Radio Interface is connected to the loop. It communicates with the control panel using the Apollo addressable two-wire power and communications system. The interface communicates with the detection and alarm signalling devices by means of radio waves. The detectors are multistate in that they report normal pre-alarm fire or fault states to the radio base which transmits the information to the interface. The detectors incorporate drift compensation and report any compensation limit occurring. The radio bases and signalling devices are addressable and use a pre-set analogue value to report via the XP95 or Discovery protocol. Apart from normal and fire the bases can send pre-set analogue values to indicate low battery detector contaminated detector tamper and low signal strength fault conditions.Brand Featuresmodern styling loop-powered interface operating on 868MHz wireless addresses seen by control panel as normal addresses radio base with wireless circuitry and battery compartment chamber designed to inhibit dirt penetration and thus reduce false alarms automatic drift compensation with DirtAlert warning algorithms for transient alarm rejection FasTest reduces time taken to test detectors remote test facility 3-5 years battery lifeProduct InformationAddress card supplied with all bases. Using a coding guide pips are removed to set the address of the inserted device.Key FeaturesSimplifies and speeds up installation and commissioningAddress remains the same no matter how often detectors are replacedUses patented proven technologyFlexibility to create any address

GBP 0.24
1

Apollo Series 65 CR Heat Detector with Flashing LED 55000-131APO

Apollo Series 65 CR Heat Detector with Flashing LED 55000-131APO

Apollo Series 65 CR Heat Detector with Flashing LED 55000-131APOThe Series 65 Heat Detector monitors temperature by using a dual thermistor network which provides a voltage output proportional to the external air temperature. There are 12 heat detectors in the Series 65 range designed to suit a wide variety of operating conditions.Brand InformationSeries 65 incorporates well-proven sensing technologies including an Integrated Circuit based on that used in XP95 analogue addressable detectors. The Series 65 range has a wide operating voltage of 933V and consists of ionisation integrating ionisation and optical smoke detectors four grades of heat detector and a range of bases.Key FeaturesCan be used for applications where smoke detectors are unsuitableIdeal for environments that are dirty or smoky under natural conditionsWide operating voltage

GBP 14.72
1

Apollo AlarmSense Sounder Beacon Base 45681-509APO

Apollo AlarmSense Sounder Beacon Base 45681-509APO

Apollo AlarmSense Sounder Beacon Base 45681-509APOThe AlarmSense Sounder Visual Indicator Base is designed to be used with AlarmSense systems only. It is supplied with a low or high volume setting and red or white caps are available for stand-alone installation.Brand InformationAlarmSense is a range of conventional fire detection and alarm products designed to be connected to the same pair of supply wires making installation quicker and less expensive. AlarmSense has been developed to make the design and installation of a fire detection and alarm system easier and more economic for small to medium-sized buildings. The range also allows an existing system to be extended or modified if necessary.This flexibility makes AlarmSense an excellent choice for use in HMOs House in Multiple Occupation. As you would expect from Apollo AlarmSense incorporates features that help reduce false alarms and patented technology to ensure the integrity of a system. The range also includes products such as beacons to help meet the requirements of the Disability Discrimination Act DDA.Key FeaturesSounder range between 70dBA and 87dBADetects the removal of a detector head and reports a faultContinues to work during unauthorised removal of detectorsQuick and simple installation

GBP 33.06
1

Apollo I.S. Galvanic Barrier 29600-098

Apollo I.S. Galvanic Barrier 29600-098

Apollo I.S. Galvanic Barrier 29600-098The Glavanic barrier is availablein the XP95 IS range and the Orbis IS range.It can be installedin safe areas and ensures system integrity.Apollo Fire Detectors manufactures fire detectors designed for use in hazardous areas. This Product Guide gives information on the intrinsically safe I.S. version of the XP95 analogue addressable range of smoke and heat detectors which have been approved by BASEEFA.The approvals are to BS EN 60079-02004 BS EN 502841999 BS EN 500202002 and BS EN 60079-262004. All types are certified to EEx ia IIC T5 at ambient temperatures up to 40C or T4 at ambient temperatures up to 60C.The range comprises ionisation and optical smoke detectors a temperature detector a detector base and a compatible manual call point. There is also a choice of two translators which ensure integrity of communication between detectors and control equipment within the constraints of an intrinsically safe system.

GBP 396.49
1

Apollo Orbis TimeSaver Base - ORB-MB-00001-APO

Apollo Orbis TimeSaver Base - ORB-MB-00001-APO

Apollo Orbis TimeSaver Base - ORB-MB-00001-APOThe Timesaver Base is a design that provides installers with an open working area with fixing holes shaped to allow a fast mounting procedure.Brand InformationOrbis is a range of conventional detectors which has been developed and tested to create advantages for fire engineers and installers as well as owners and users of buildings. Orbis is a range with modern styling and a mounting base that saves installation time. It is electrically compatible with Apollo Series 65 and previous ranges of conventional detector.Orbis is a demonstration of Apollos commitment to the market for high quality conventional detectors for use in small to medium size installations. In developing this range Apollo has put ease of installation and reliability in daily operation at the forefront of considerations. The attractive and compact design means that Orbis will blend in well with all architectural styles.Key Features Grouped terminals to make wiring easyTwo fixing centresLED alignment markCable stripping guideDetector locking mechanism

GBP 3.70
1

Apollo Orbis TimeSaver Sav-Wire Base ORB-SW-10005-APO

Apollo Orbis TimeSaver Sav-Wire Base ORB-SW-10005-APO

Apollo Orbis TimeSaver Sav-Wire Base ORB-SW-10005-APOThe Sav-Wire Base is designed to allow Orbis detectors to be used in Sav-Wire detection and alarm systems.Brand InformationOrbis is a range of conventional detectors which has been developed and tested to create advantages for fire engineers and installers as well as owners and users of buildings. Orbis is a range with modern styling and a mounting base that saves installation time. It is electrically compatible with Apollo Series 65 and previous ranges of conventional detector.Orbis is a demonstration of Apollos commitment to the market for high quality conventional detectors for use in small to medium size installations. In developing this range Apollo has put ease of installation and reliability in daily operation at the forefront of considerations. The attractive and compact design means that Orbis will blend in well with all architectural styles.Key Features Grouped terminals to make wiring easyTwo fixing centresLED alignment markCable stripping guideDetector locking mechanismIs used in Sav-Wire systems

GBP 8.86
1

Apollo Series 65 BR Heat Detector with Flashing LED - 55000-126APO

Apollo Series 65 BR Heat Detector with Flashing LED - 55000-126APO

Apollo Series 65 BR Heat Detector with Flashing LED - 55000-126APOThe Series 65 Heat Detector monitors temperature by using a dual thermistor network which provides a voltage output proportional to the external air temperature. There are 12 heat detectors in the Series 65 range designed to suit a wide variety of operating conditions.Brand InformationSeries 65 incorporates well-proven sensing technologies including an Integrated Circuit based on that used in XP95 analogue addressable detectors. The Series 65 range has a wide operating voltage of 933V and consists of ionisation integrating ionisation and optical smoke detectors four grades of heat detector and a range of bases.Key FeaturesCan be used for applications where smoke detectors are unsuitableIdeal for environments that are dirty or smoky under natural conditionsWide operating voltage Flashing LED and magnet operated test switch optionProduct CodesDescriptions55000-126APOSeries 65 BR Heat Detector with Flashing LED55000-125APOSeries 65 BR Heat Detector with Flashing LED and Magnetic Test Switch55000-131APOSeries 65 CR Heat Detector with Flashing LED

GBP 14.72
1

Apollo XP95 I.S. Mounting Base 45681-215APO

Apollo XP95 I.S. Mounting Base 45681-215APO

Apollo XP95 I.S. Mounting Base 45681-215APOThe XP95 IS Mounting Base has been designed to accept only IS products. This ensures that standard detectors cannot inadvertently be fitted into an intrinsically safe system. XPERT cards are supplied with all bases. The XP95 IS Base for the intrinsically safe range is not identical with that for the standard range. This ensures that standard detectors cannot inadvertently be fitted to an intrinsically safe system.Key FeaturesWide cable entry.Contains no electronic parts.One way only fitLow insertion force.Large terminations.Lockable security fitting.White finish.Must be connected to a suitable safety barrier and protocol translator.

GBP 7.10
1

Apollo AlarmSense A1R Heat Detector Standard 55000-190APO

Apollo AlarmSense A1R Heat Detector Standard 55000-190APO

Apollo AlarmSense A1R Heat Detector Standard 55000-190APOThere are two heat detectors in the AlarmSense range designed to suit a wide variety of operating conditions. A static heat detector CS which responds only when a fixed temperature has been reached and a rate-of-rise detector A1R which has a fixed upper limit but in addition measures the rate of increase in temperature.AlarmSense is a range of conventional fire detection and alarm products designed to be connected to the same pair of supply wires making installation quicker and less expensive. AlarmSense has been developed to make the design and installation of a fire detection and alarm system easier and more economic for small to medium-sized buildings. The range also allows an existing system to be extended or modified if necessary. This flexibility makes AlarmSense an excellent choice for use in HMOs House in Multiple Occupation. As you would expect from Apollo AlarmSense incorporates features that help reduce false alarms and patented technology to ensure the integrity of a system. The range also includes products such as beacons to help meet the requirements of the Disability Discrimination Act DDA.Brand FeaturesFlexibleReliableCost-effectiveCompliant with BS 5839Easy to installEasy to extendProduct InformationThere are two heat detectors in the AlarmSense range designed to suit a wide variety of operating conditions. A static heat detector CS which responds only when a fixed temperature has been reached and a rate-of-rise detector A1R which has a fixed upper limit but in addition measures the rate of increase in temperature.Key Features Can be used for applications where smoke detectors are unsuitableIdeal environments that are dirty or smoky under normal conditionsCS detectors are ideal for use in environments with rapid temperature fluctuations such as boiler rooms360C visibility of LEDsReduction offalse alarmsQuick and simple installation

GBP 12.85
1

Apollo Orbis TimeSaver Deep Base - ORB-MB-00019-APO

Apollo Orbis TimeSaver Deep Base - ORB-MB-00019-APO

Apollo Orbis TimeSaver Deep Base - ORB-MB-00019-APOThe TimeSaver Deep Base is a mounting base for Orbis products which has an increased depth which allows for cables to be inserted into the side of the product.Brand InformationOrbis is a range of conventional detectors which has been developed and tested to create advantages for fire engineers and installers as well as owners and users of buildings. Orbis is a range with modern styling and a mounting base that saves installation time. It is electrically compatible with Apollo Series 65 and previous ranges of conventional detector.Orbis is a demonstration of Apollos commitment to the market for high quality conventional detectors for use in small to medium size installations. In developing this range Apollo has put ease of installation and reliability in daily operation at the forefront of considerations. The attractive and compact design means that Orbis will blend in well with all architectural styles.Key Features Grouped terminals to make wiring easyTwo fixing centresLED alignment markCable stripping guideDetector locking mechanismEnables surface wiring

GBP 6.04
1

Apollo Orbis Intrinsically Safe A1S Heat Detector with Flashing LED ORB-HT-51158-APO

Apollo Orbis Intrinsically Safe A1S Heat Detector with Flashing LED ORB-HT-51158-APO

Apollo Orbis Intrinsically Safe A1S Heat Detector with Flashing LED ORB-HT-51158-APOThe Orbis IS Heat Detector monitors temperature by using a single thermistor network which provides a voltage output proportional to the external air temperature. The Orbis IS range incorporates seven heat detector classes to suit a wide range of operating conditions.InstallationIt is important that the Orbis I.S. detectors be installed in such a way that all terminals and connections are protected to at least IP20 when the detector is in the base. Special care must be taken with the rear of the mounting base where live metal parts may be accessible.Flush mounting of the base on a flat surface will provide the required degree of protection. The conduit box available from Apollo part no. 45681-204 is also acceptable for mounting I.S. bases. Apollo also supply a range of deckhead mounting boxes.Key FeaturesCan be used for applications where smoke detectors are unsuitableIdeal for environments that are dirty or smoky under normal conditionsReduced incidences of false alarmsIncreased reliability of detection

GBP 77.36
1

Apollo AlarmSense Base 45681-244APO

Apollo AlarmSense Base 45681-244APO

Apollo AlarmSense Base 45681-244APOAlarmSense detectors can only be mounted into the AlarmSense Base. The base is used for installing detectors that do not require an integral sounder or sounder visual indicator. AlarmSense is a range of conventional fire detection and alarm products designed to be connected to the same pair of supply wires making installation quicker and less expensive.AlarmSense has been developed to make the design and installation of a fire detection and alarm system easier and more economic for small to medium-sized buildings. The range also allows an existing system to be extended or modified if necessary. This flexibility makes AlarmSense an excellent choice for use in HMOs House in Multiple Occupation.As you would expect from Apollo AlarmSense incorporates features that help reduce false alarms and patented technology to ensure the integrity of a system. The range also includes products such as beacons to help meet the requirements of the Disability Discrimination Act DDA.Key FeaturesDetects the removal of a detector head and reports a faultContinues to work during unauthorised removal of detectorsQuick and simple installationBrand FeaturesFlexibleReliableCost-effectiveCompliant with BS 5839Easy to installEasy to extend

GBP 4.45
1

Apollo Marine Orbis BS Heat Detector - ORB-HT-41004-MAR

Apollo Marine Orbis BS Heat Detector - ORB-HT-41004-MAR

Apollo Marine Orbis BS Heat Detector - ORB-HT-41004-MARThe Orbis Marine Heat Detector uses a single thermistor to sense the air temperature around the detector. There are twelve heat detectors in the Orbis Marine range designed to suit a wide variety of operating conditions.OperationThe Orbis range incorporates seven heat detector classes to suit a wide variety of operating conditions in which smoke detectors are unsuitable. The European standard EN54-52001 classifies heat detectors according to the highest ambient temperature in which they can safely be used without risk of false alarm.The classes are identified by the letters A to G. Class A is subdivided into A1 and A2. In addition to the basic classification detectors may be identified by a suffix to show that they are rate-of-rise suffix R or fixed temperature suffix S types. All heat detectors in the Orbis range are tested as static or rate-of-rise detectors and are classified as A1R A1S A2S BR BS CR and CS.Key FeaturesCan be used for applications where smoke detectors are unsuitableIdeal for environments that are dirty or smoky under normal conditions

GBP 20.99
1

Apollo Orbis Marine A2S Heat Detector with Flashing LED ORB-HT-41014-MAR

Apollo Orbis Marine A2S Heat Detector with Flashing LED ORB-HT-41014-MAR

Apollo Orbis Marine A2S Heat Detector with Flashing LED ORB-HT-41014-MARThe Orbis Marine Heat Detector uses a single thermistor to sense the air temperature around the detector. There are twelve heat detectors in the Orbis Marine range designed to suit a wide variety of operating conditions.ApplicationHeat detectors have a wide range of response characteristics and the choice of the right type for a particular application may not always seem straightforward. It is helpful to understand the way that heat detectors are classified as explained earlier and to memorize a simple rule use the most sensitive heat detector available consistent with avoiding false alarms.Key FeaturesCan be used for applications where smoke detectors are unsuitableIdeal for environments that are dirty or smoky under normal conditionsFlashing LED option

GBP 19.97
1

Apollo Orbis TimeSaver Relay Base - ORB-RB-10004-APO

Apollo Orbis TimeSaver Relay Base - ORB-RB-10004-APO

Apollo Orbis TimeSaver Relay Base - ORB-RB-10004-APOThe TimeSaver Relay Base incorporates a single-pole voltage-free changeover contact for switching external equipment. When the detector changes to the alarm state the relay is energised causing the contact to change state. The contact will remain in this condition until the detector is reset.Brand InformationOrbis is a range of conventional detectors which has been developed and tested to create advantages for fire engineers and installers as well as owners and users of buildings. Orbis is a range with modern styling and a mounting base that saves installation time. It is electrically compatible with Apollo Series 65 and previous ranges of conventional detector.Orbis is a demonstration of Apollos commitment to the market for high quality conventional detectors for use in small to medium size installations. In developing this range Apollo has put ease of installation and reliability in daily operation at the forefront of considerations. The attractive and compact design means that Orbis will blend in well with all architectural styles.Key Features Grouped terminals to make wiring easyTwo fixing centresLED alignment markCable stripping guideDetector locking mechanismContinuity link for voltage testing of zone wiring prior to commissioningCapable of switching up to 30V at 1A

GBP 17.98
1

Apollo AlarmSense Integrating Optical Smoke Detector with Sounder Base 55000-393APO

Apollo AlarmSense Integrating Optical Smoke Detector with Sounder Base 55000-393APO

Please note This product is obsolete but we do have limited stock available. Please contact us for further information.Apollo AlarmSense Integrating Optical Smoke Detector with Sounder Base 55000-393The AlarmSense Integrating Optical Smoke Detector works using the light scatter principle. The detector also has the ability to monitor and discard transient sources of smoke. AlarmSense is a range of conventional fire detection and alarm products designed to be connected to the same pair of supply wires making installation quicker and less expensive. AlarmSense has been developed to make the design and installation of a fire detection and alarm system easier and more economic for small to medium-sized buildings.The range also allows an existing system to be extended or modified if necessary. This flexibility makes AlarmSense an excellent choice for use in HMOs House in Multiple Occupation. As you would expect from Apollo AlarmSense incorporates features that help reduce false alarms and patented technology to ensure the integrity of a system. The range also includes products such as beacons to help meet the requirements of the Disability Discrimination Act DDA.Key FeaturesResponds well to slow-burning smouldering firesWell suited for bedrooms and escape routes360C visibility of LEDsReduces false alarmsQuick and simple installationDesigned to operate in environments where transient levels of smoke may be expectedReduces false alarms20 second delayAlarmSense FeaturesFlexibleReliableCost-effectiveCompliant with BS 5839Easy to installEasy to extend

GBP 29.43
1

Apollo AlarmSense Sounder Base 45681-510APO

Apollo AlarmSense Sounder Base 45681-510APO

Apollo AlarmSense Sounder Base 45681-510APOThe AlarmSense Sounder Base can only be used with AlarmSense systems. It is fitted with electronic circuitry to monitor the presence of detectors and signals any unauthorised removal of detector heads. It is supplied with a high or low volume setting and red or white capsare available for stand-alone installation.Brand InformationAlarmSense is a range of conventional fire detection and alarm products designed to be connected to the same pair of supply wires making installation quicker and less expensive.AlarmSense has been developed to make the design and installation of a fire detection and alarm system easier and more economic for small to medium-sized buildings. The range also allows an existing system to be extended or modified if necessary. This flexibility makes AlarmSense an excellent choice for use in HMOs House in Multiple Occupation.As you would expect from Apollo AlarmSense incorporates features that help reduce false alarms and patented technology to ensure the integrity of a system. The range also includes products such as beacons to help meet the requirements of the Disability Discrimination Act DDA.Brand FeaturesFlexibleReliableCost-effectiveCompliant with BS 5839Easy to installEasy to extendKey FeaturesAlarmSense prioritynon priority signal recognitionDetects the removal of a detector head and reports a faultContinues to work during unauthorised removal of detectorsQuick and simple installationProvides audible signal and detection at one pointHigh and low volume ranges

GBP 22.99
1

Apollo AlarmSense Optical Smoke Detector 55000-390APO

Apollo AlarmSense Optical Smoke Detector 55000-390APO

Apollo AlarmSense Optical Smoke Detector 55000-390The AlarmSense Optical Smoke Detector works using the light scatter principle. The detector changes to alarm state at a pre-set threshold of smoke penetration into the sensing chamber.AlarmSense is a range of conventional fire detection and alarm products designed to be connected to the same pair of supply wires making installation quicker and less expensive. AlarmSense has been developed to make the design and installation of a fire detection and alarm system easier and more economic for small to medium-sized buildings.The range also allows an existing system to be extended or modified if necessary. This flexibility makes AlarmSense an excellent choice for use in HMOs House in Multiple Occupation. As you would expect from Apollo AlarmSense incorporates features that help reduce false alarms and patented technology to ensure the integrity of a system. The range also includes products such as beacons to help meet the requirements of the Disability Discrimination Act DDA.Brand FeaturesFlexibleReliableCost-effectiveCompliant with BS 5839Easy to installEasy to extendProduct InformationThe AlarmSense Optical Smoke Detector works using the light scatter principle. The detector changes to alarm state at a pre-set threshold of smoke penetration into the sensing chamber.Key Features Responds well to slow-burning smouldering firesWell suited for bedrooms and escape routes360C visibility of LEDsReduces false alarmsQuick and simple installation

GBP 15.76
1

Apollo Orbis Intrinsically Safe BS Heat Detector with Flashing LED ORB-HT-51152-APO

Apollo Orbis Intrinsically Safe BS Heat Detector with Flashing LED ORB-HT-51152-APO

Apollo Orbis Intrinsically Safe BS Heat Detector with Flashing LED ORB-HT-51152-APOThe Orbis IS Heat Detector monitors temperature by using a single thermistor network which provides a voltage output proportional to the external air temperature. The Orbis IS range incorporates seven heat detector classes to suit a wide range of operating conditions.InstallationIt is important that the Orbis I.S. detectors be installed in such a way that all terminals and connections are protected to at least IP20 when the detector is in the base. Special care must be taken with the rear of the mounting base where live metal parts may be accessible. Flush mounting of the base on a flat surface will provide the required degree of protection.Key FeaturesCan be used for applications where smoke detectors are unsuitableIdeal for environments that are dirty or smoky under normal conditionsReduced incidences of false alarmsIncreased reliability of detection

GBP 79.37
1