197 results (0,14093 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Advanced MxPro 5 MX-5010 Remote Display Terminal with Standard Network

Advanced MxPro 5 MX-5010 Remote Display Terminal with Standard Network

Advanced MxPro 5 MX-5010 Remote Display Terminal with Standard NetworkThe remote terminals utilise the same graphical LCD user interface that can be found on the MxPro 5 series fire panels and are based upon the same advanced flash based microprocessor technology. The MxPro 5 panels and remote terminals can communicate over the same 2-core network cable. They feature an integral network interface incorporating a special screen termination to prevent mains frequency earth-loop currents flowing between network nodes.The Ad-NeT network operates as a true peer-to-peer system with full cross panel reporting control and cause-and-effect functionality of up to 2000 zones. All remote terminals incorporate buzzer mute view enabledisable and test facilities with dedicated system and navigation keys for simple user control.The display information is fully programmable by individual zone or sector and can display any combination of fires faults pre-alarms or plant alarms. E.g. can display all information in its own sector but can only show fire signals from other sectors of a building.Key FeaturesProgrammable switch inputGraphical LCD DisplayAd-NeTAd-NeT CompatibleSlide-in LabelsSmall Robust compact24V DC Operating voltage3 Year WarrantyDisableenable options

GBP 636.48
1

Advanced MxPro 5 MX-5010FT Remote Display Terminal with Fault Tolerant Network

Advanced MxPro 5 MX-5010FT Remote Display Terminal with Fault Tolerant Network

Advanced MxPro 5 MX-5010FT Remote Display Terminal with Fault Tolerant NetworkThe remote terminals utilise the same graphical LCD user interface that can be found on the MxPro 5 series fire panels and are based upon the same advanced flash based microprocessor technology. The MxPro 5 panels and remote terminals can communicate over the same 2-core network cable. They feature an integral network interface incorporating a special screen termination to prevent mains frequency earth-loop currents flowing between network nodes.The Ad-NeT network operates as a true peer-to-peer system with full cross panel reporting control and cause-and-effect functionality of up to 2000 zones. All remote terminals incorporate buzzer mute view enabledisable and test facilities with dedicated system and navigation keys for simple user control.The display information is fully programmable by individual zone or sector and can display any combination of fires faults pre-alarms or plant alarms. E.g. can display all information in its own sector but can only show fire signals from other sectors of a building.Key FeaturesProgrammable switch inputGraphical LCD DisplayAd-NeTAd-NeT CompatibleSlide-in LabelsSmall Robust compact24V DC Operating voltage3 Year WarrantyDisableenable options

GBP 1198.82
1

Advanced MxPro 4 MX-4010 Remote Display Terminal with Standard Network Interface

Advanced MxPro 4 MX-4010 Remote Display Terminal with Standard Network Interface

Advanced MxPro 4 MX-4010 Remote Display Terminal with Standard Network InterfaceBased around two core products the MxPro 4 Remote Display Terminal RDT and the fully functional MxPro 4 Remote Control Terminal RCT both utilise the same graphical LCD user interface that can be found on the MxPro 4 series fire panels and are based upon the same advanced flash based microprocessor technology.All MxPro 4 series panels and remote terminals can communicate over the same 2-core network cable. Integral network interface incorporating a special screen termination to prevent mains frequency earth-loop currents flowing between network nodes. The Ad-NeT network operates as a true peer-to-peer system with full cross panel reporting control and cause and effect functionality of up to 1000 zones.Key FeaturesNetworked for System DisplayNetworked for System Control24V DC Operating Voltage3 Year warrantyGraphical LCD DisplayAd-NeTAd-NeT CompatibleSmall Robust

GBP 746.17
1

Advanced MxPro 4 MX-4010FT Remote Display Terminal with Fault Tolerant Network Interface

Advanced MxPro 4 MX-4010FT Remote Display Terminal with Fault Tolerant Network Interface

Advanced MxPro 4 MX-4010FT Remote Display Terminal with Fault Tolerant Network InterfaceBased around two core products the MxPro 4 Remote Display Terminal RDT and the fully functional MxPro 4 Remote Control Terminal RCT both utilise the same graphical LCD user interface that can be found on the MxPro 4 series fire panels and are based upon the same advanced flash based microprocessor technology.All MxPro 4 series panels and remote terminals can communicate over the same 2-core network cable. Integral network interface incorporating a special screen termination to prevent mains frequency earth-loop currents flowing between network nodes. The Ad-NeT network operates as a true peer-to-peer system with full cross panel reporting control and cause and effect functionality of up to 1000 zones.Key FeaturesNetworked for System DisplayNetworked for System Control24V DC Operating Voltage3 Year warrantyGraphical LCD DisplayAd-NeTAd-NeT CompatibleSmall Robust

GBP 1455.28
1

Advanced MxPro 5 MX-5030FT Remote Control Terminal Fault Tolerant Network with Large Enclosure

Advanced MxPro 5 MX-5030FT Remote Control Terminal Fault Tolerant Network with Large Enclosure

Advanced MxPro 5 MX-5030FT Remote Control Terminal Fault Tolerant Network with Large EnclosureThe remote terminals utilise the same graphical LCD user interface that can be found on the MxPro 5 series fire panels and are based upon the same advanced flash based microprocessor technology. The MxPro 5 panels and remote terminals can communicate over the same 2-core network cable. They feature an integral network interface incorporating a special screen termination to prevent mains frequency earth-loop currents flowing between network nodes.The Ad-NeT network operates as a true peer-to-peer system with full cross panel reporting control and cause-and-effect functionality of up to 2000 zones. All remote terminals incorporate buzzer mute view enabledisable and test facilities with dedicated system and navigation keys for simple user control. The display information is fully programmable by individual zone or sector and can display any combination of fires faults pre-alarms or plant alarms. E.g. can display all information in its own sector but can only show fire signals from other sectors of a building.Key FeaturesProgrammable switch inputGraphical LCD DisplayAd-NeTAd-NeT CompatibleSlide-in LabelsSmall robust compact24V DC Operating voltage3 Year WarrantyDisableenable options

GBP 1521.97
1

Advanced MxPro 5 MX-5030 Remote Control Terminal Standard Network with Large Enclosure

Advanced MxPro 5 MX-5030 Remote Control Terminal Standard Network with Large Enclosure

Advanced MxPro 5 MX-5030 Remote Control Terminal Standard Network with Large EnclosureThe remote terminals utilise the same graphical LCD user interface that can be found on the MxPro 5 series fire panels and are based upon the same advanced flash based microprocessor technology. The MxPro 5 panels and remote terminals can communicate over the same 2-core network cable. They feature an integral network interface incorporating a special screen termination to prevent mains frequency earth-loop currents flowing between network nodes.The Ad-NeT network operates as a true peer-to-peer system with full cross panel reporting control and cause-and-effect functionality of up to 2000 zones. All remote terminals incorporate buzzer mute view enabledisable and test facilities with dedicated system and navigation keys for simple user control. The display information is fully programmable by individual zone or sector and can display any combination of fires faults pre-alarms or plant alarms. E.g. can display all information in its own sector but can only show fire signals from other sectors of a building.Key FeaturesProgrammable switch inputGraphical LCD DisplayAd-NeTAd-NeT CompatibleSlide-in LabelsSmall robust compact24V DC Operating voltage3 Year WarrantyDisableenable options

GBP 961.03
1

Advanced MxPro 5 MX-5020 Remote Control Terminal with Standard Network

Advanced MxPro 5 MX-5020 Remote Control Terminal with Standard Network

Advanced MxPro 5 MX-5020 Remote Control Terminal with Standard NetworkThe remote terminals utilise the same graphical LCD user interface that can be found on the MxPro 5 series fire panels and are based upon the same advanced flash based microprocessor technology. The MxPro 5 panels and remote terminals can communicate over the same 2-core network cable. They feature an integral network interface incorporating a special screen termination to prevent mains frequency earth-loop currents flowing between network nodes.The Ad-NeT network operates as a true peer-to-peer system with full cross panel reporting control and cause-and-effect functionality of up to 2000 zones. All remote terminals incorporate buzzer mute view enabledisable and test facilities with dedicated system and navigation keys for simple user control. The display information is fully programmable by individual zone or sector and can display any combination of fires faults pre-alarms or plant alarms. E.g. can display all information in its own sector but can only show fire signals from other sectors of a building.Key FeaturesProgrammable switch inputGraphical LCD DisplayAd-NeTAd-NeT CompatibleSlide-in LabelsSmall robust compact24V DC Operating voltage3 Year WarrantyDisableenable options

GBP 786.18
1

Advanced MxPro 5 MX-5020FT Remote Control Terminal with Fault Tolerant Network

Advanced MxPro 5 MX-5020FT Remote Control Terminal with Fault Tolerant Network

Advanced MxPro 5 MX-5020FT Remote Control Terminal with Fault Tolerant NetworkThe remote terminals utilise the same graphical LCD user interface that can be found on the MxPro 5 series fire panels and are based upon the same advanced flash based microprocessor technology. The MxPro 5 panels and remote terminals can communicate over the same 2-core network cable. They feature an integral network interface incorporating a special screen termination to prevent mains frequency earth-loop currents flowing between network nodes.The Ad-NeT network operates as a true peer-to-peer system with full cross panel reporting control and cause-and-effect functionality of up to 2000 zones. All remote terminals incorporate buzzer mute view enabledisable and test facilities with dedicated system and navigation keys for simple user control. The display information is fully programmable by individual zone or sector and can display any combination of fires faults pre-alarms or plant alarms. E.g. can display all information in its own sector but can only show fire signals from other sectors of a building.Key FeaturesProgrammable switch inputGraphical LCD DisplayAd-NeTAd-NeT CompatibleSlide-in LabelsSmall robust compact24V DC Operating voltage3 Year WarrantyDisableenable options

GBP 1348.54
1

Advanced LL-PGR-01 Lifeline Vibrating Rechargeable Pager with Out of Range Enabled and Charger

Advanced LL-PGR-01 Lifeline Vibrating Rechargeable Pager with Out of Range Enabled and Charger

Advanced LL-PGR-01 Lifeline Vibrating Rechargeable Pager with Out of Range Enabled and ChargerThe LifeLine rechargeable pager is an alphanumeric pager with a large TFT colour display which displays easy-to-follow icons and twenty-five characters of text on up to six lines. The handheld battery-operated pager is specifically programmed to work supporting all the features of the LifeLine system in order meet the relevant standards.The pager is easy to use with six large buttons forming the user interface. Two of the buttons are soft keys menu driven from the display to allow quick and easy access to messages.Features include various tone and vibration settings and a selection of individual alarms an operator can set with all messages date and time stamped. The device also has a separate status LED in the top right-hand corner. When the pager receives a message the status LED will illuminate for five second along with an audibletactile alert. The device can store up to 200 messages and when full the oldest message will be removed to make room for the latest.The rechargeable Lithium battery is capable of providing up to ten days operation in standby mode and the display also includes a voltage level indicator. The recharging function is provided via a 5V mini-USB port.The pager comes complete with a belt holster charging cable and plug.There is no limit to the number of pagers that can be used with a LifeLine panel and each pager has its own identity for installation.Key FeaturesSupports all features of the LifeLine pager panelLarge TFT Colour display 2.2 Inch 320 240 pixelsRechargeable battery via 5V mini-USB PortUp to 10 Days battery life in standbyBattery Level IndicatorSelection of vibration and tone alert

GBP 462.60
1

Advanced LL-PGR-02 Lifeline Engineering Vibrating Rechargeable Pager with USB Charger

Advanced LL-PGR-02 Lifeline Engineering Vibrating Rechargeable Pager with USB Charger

Advanced LL-PGR-02 Lifeline Engineering Vibrating Rechargeable Pager comes with USB ChargerThe LifeLine rechargeable pager is an alphanumeric pager with a large TFT colour display which displays easy-to-follow icons and twenty-five characters of text on up to six lines. The handheld battery-operated pager is specifically programmed to work supporting all the features of the LifeLine system in order meet the relevant standards.The pager is easy to use with six large buttons forming the user interface. Two of the buttons are soft keys menu driven from the display to allow quick and easy access to messages.Features include various tone and vibration settings and a selection of individual alarms an operator can set with all messages date and time stamped. The device also has a separate status LED in the top right-hand corner. When the pager receives a message the status LED will illuminate for five second along with an audibletactile alert. The device can store up to 200 messages and when full the oldest message will be removed to make room for the latest.The rechargeable Lithium battery is capable of providing up to ten days operation in standby mode and the display also includes a voltage level indicator. The recharging function is provided via a 5V mini-USB port.The pager comes complete with a belt holster charging cable and plug.There is no limit to the number of pagers that can be used with a LifeLine panel and each pager has its own identity for installation.Key FeaturesSupports all features of the LifeLine pager panelLarge TFT Colour display 2.2 Inch 320 240 pixelsRechargeable battery via 5V mini-USB PortUp to 10 Days battery life in standbyBattery Level IndicatorSelection of vibration and tone alert

GBP 462.60
1

Advanced LL-PGR Lifeline Vibrating Rechargeable Pager with USB Charger

Advanced LL-PGR Lifeline Vibrating Rechargeable Pager with USB Charger

Advanced LL-PGR Lifeline Vibrating Rechargeable Pager with USB ChargerThe LifeLine rechargeable pager is an alphanumeric pager with a large TFT colour display which displays easy-to-follow icons and twenty-five characters of text on up to six lines. The handheld battery-operated pager is specifically programmed to work supporting all the features of the LifeLine system in order meet the relevant standards.The pager is easy to use with six large buttons forming the user interface. Two of the buttons are soft keys menu driven from the display to allow quick and easy access to messages.Features include various tone and vibration settings and a selection of individual alarms an operator can set with all messages date and time stamped. The device also has a separate status LED in the top right-hand corner. When the pager receives a message the status LED will illuminate for five second along with an audibletactile alert. The device can store up to 200 messages and when full the oldest message will be removed to make room for the latest.The rechargeable Lithium battery is capable of providing up to ten days operation in standby mode and the display also includes a voltage level indicator. The recharging function is provided via a 5V mini-USB port.The pager comes complete with a belt holster charging cable and plug.There is no limit to the number of pagers that can be used with a LifeLine panel and each pager has its own identity for installation.Key FeaturesSupports all features of the LifeLine pager panelLarge TFT Colour display 2.2 Inch 320 240 pixelsRechargeable battery via 5V mini-USB PortUp to 10 Days battery life in standbyBattery Level IndicatorSelection of vibration and tone alert

GBP 462.60
1

Advanced MXP-013-100 MxPro 100 Zone LED Card for MX-4200 4400 4800 Retro-fit

Advanced MXP-013-100 MxPro 100 Zone LED Card for MX-4200 4400 4800 Retro-fit

AdvancedMXP-013-100MxPro 100 Zone LED Card for MX-4200 4400 4800 with Door Label Retro-fit -MXP-013-100The Zonal LED indicator cards are a range of panel mounted peripheral modules that can be added to the MxPro 4 series of control panels. The display cards are available in numerous configurations and provide individual indication of the zones in fire.The units fully support dynamic zoning on networked or larger stand-alone systems and can be used to provide individual zonal LED indication at one location. 20 zone units are available which are fitted to the front display plate on the MxPro 4 series control panel. The Mxp-013-050F Mxp-013-100F and Mxp-013-200F incorporate 50 100 or 200 LED indicators respectively and are compatible with all MxPro 4 series multiloop panels.FeaturesThe cards are capable of simultaneously displaying all zones in a fire condition and incorporate a unique power saving feature to minimise the power drawn from the control panel in the event of a major fire. Several other options are also available within the MxPro 4 range for applications where indication of fire signals from zones in addition to the panels graphical display is required. These options include Advanced Mimic Units graphical systems and printers.Key FeaturesUp to 200 zones available3 year warranty as standardFactory fitted or retro fitDynamic zoningCost effective against ancillary hardware

GBP 491.29
1

Advanced MxPro 5 LED Indication - Zone 200 MXP-513-200RY

Advanced MxPro 5 LED Indication - Zone 200 MXP-513-200RY

Advanced MxPro 5 LED Indication - Zone 200 MXP-513-200RYThe LED indicator cards are a range of panel mounted peripheral modules that can be added to theMxPro 5series of control panels. The display cards are available in numerous configurations and provide individual indication of the zones in Fire by default but are also fully programmable.The units fully support dynamic zoning on networked or larger standalone systems and can be used to provide individual zonal LED indication at one location.ApplicationsThe zoneLED indicator card can be fitted to allMxPro 5control panels to provide indication of the zones in fire in addition to the panel graphical display. The LED will illuminate when the corresponding zone enters a Fire condition.This next generation in LED technology also allows the LED to be fully programmed. Each LED can now operate in accordance with the cause-and-effect strategy in which the LED can illuminate upon Fault Isolation Output Group plus many more.LED cards can now be ordered with Red and Yellow LED arrangements or provided with bi-colour LEDs with slide-in labels to assist identifying the origin of the condition.Key FeaturesProgrammable LEDs3-year warranty as standardFactory fitted or retro-fitSupports dynamic zoningFully programmableCost effective against ancillary hardware

GBP 468.11
1

Advanced MXP-513-200RYF 200 Zone REDYEL Fitted

Advanced MXP-513-200RYF 200 Zone REDYEL Fitted

Advanced MXP-513-200RYF 200 Zone REDYEL FittedThe LED indicator cards are a range of panel mounted peripheral modules that can be added to theMxPro 5series of control panels. The display cards are available in numerous configurations and provide individual indication of the zones in Fire by default but are also fully programmable.The units fully support dynamic zoning on networked or larger standalone systems and can be used to provide individual zonal LED indication at one location.ApplicationsThe zoneLED indicator card can be fitted to allMxPro 5control panels to provide indication of the zones in fire in addition to the panel graphical display. The LED will illuminate when the corresponding zone enters a Fire condition.This next generation in LED technology also allows the LED to be fully programmed. Each LED can now operate in accordance with the cause-and-effect strategy in which the LED can illuminate upon Fault Isolation Output Group plus many more.LED cards can now be ordered with Red and Yellow LED arrangements or provided with bi-colour LEDs with slide-in labels to assist identifying the origin of the condition.Key FeaturesProgrammable LEDs3-year warranty as standardFactory fitted or retro-fitSupports dynamic zoningFully programmableCost effective against ancillary hardware

GBP 468.11
1

Advanced Touch Screen Terminal Touch-10

Advanced Touch Screen Terminal Touch-10

Advanced Touch Screen Terminal Touch-10TouchControl is a 10 high-resolution touch screen Remote Control Terminal with active maps and zone plans. It is a fire panel and network node in its own right and works on Advanceds standard and fault tolerant networks. It is compatible with our MxPro and Axis EN fire panels. Zone information is presented via the units colour coded easy-to-navigate interface and the active maps that are easily configured using the Dynamix Tools Map App. Using TouchControls colour-coded easy-to-navigate interface users canEvacuateMuteSilenceResound ResetView fires faults disablementsalarms inputs outputs supervisory and network via instant filtersViewenabledisable zonesViewenabledisable devicesEnabledisable outputs by typeEnable Walk Test modeTest displayzonesoutputsbuzzer and LEDsQuickly access all zones in firefaultdisablementtest via instant filters and where allowed change statusView 1000 general and 500 Fire event logSet network time and dateUsers can choose from five pre-set background images or upload their own. The relevant zone plan to the units position can be displayed and users can run presentations on the display which defaults to normal operation in the event of a fire condition or if the screen is touched. TouchControl enhances public areas and provides new levels of control and oversight.Key Features2 Part enclosure for easy first fix and slide-in installation.10high resolution screen designed to work with firemans glove At a glance system status immediately identify zones and devices in Fire Test Supervisory and FaultInteractive site maps and zone plans capability built-inMonitored external input for external PSU faultsTwo-core connection to the network fault tolerant or standardLow-profile bezel for flush fittingSelect from a number of background images or add a customised imageLow profile installationDedicated status indicators for Fire Fault System Fault Disabled Test and PowerZone plan display an essential part of BS5839-1Dual Power Supply inputs independently monitored to allow redundant power feeds

GBP 2147.28
1

Advanced MXP-545 MxPro 5 Peripheral Expansion Network Node standard

Advanced MXP-545 MxPro 5 Peripheral Expansion Network Node standard

Advanced MXP-545 MxPro 5 Peripheral Expansion Network Node standardThe Peripheral Expansion Network Node PENN provides the functionality of the MxPro 5 Series Fire Alarm Control Panels for use in bespoke graphical mimic connecting remote inputs and outputs directly to the network and other special build applications. The PENN allows a comprehensive range of peripherals to be connected to the network without having to install additional panels.Compatible expansion cards include Input MXP-537 Relay MXP-035 Mimic driver MXP-539 16 way Switch MXP-538 FanDamper Control MXP-543 Zone Monitor MXP-536 Sounder MXP-034 and ESPA Pager Interface MXP-547. Accessories such as a Display Card MXS-504 Printer MXP-512 and LED Indicators MXP-513-xxx can also be added.The PENN is pre-built to include either a Standard network or a Fault Tolerant FT network interface The unit is designed for easy wiring installation. Plug-in terminal blocks are provided for all connections to the unit. RS232 as well as USB Type B are built-in. The PENN is designed to be installed directly to mounting chassis plates such as MXM-515-6U MXM-515-8U etc. using six fixing screw positions. The chassis assembly can be mounted into MX-5000 and MX-5000R enclosures.Key FeaturesLets you install peripherals in remote locations without an additional panelDual Feed 24V DC Power Supply InputsNetwork in-built either Standard or Fault TolerantUp to 32 Nodes in Standard configuration and Up to 200 Nodes in FT configurationSupports up to 32 PBUS modules 16 of any one typeOption to connect standard MX-5000 Display andor MXP-512 internal printer andor MXP-513 LED cardsSwitch Input General purpose or External PSE fault monitorRS232 Interface PC Configuration External Printer or MXP-547 ESPAUSB Interface PC Configuration

GBP 504.90
1

Advanced MX-5403AE 1-4 Loop Fire Panel - 3 Loop Cards - Extended CoreProtocol

Advanced MX-5403AE 1-4 Loop Fire Panel - 3 Loop Cards - Extended CoreProtocol

Advanced MX-5404AE 1-4 Loop Fire Panel - 4 Loop Cards - Extended CoreProtocolThe MxPro 5 series is fully expandable from 1 to 4 loops and supplied with 4 onboard sounder circuits 20 programmable zonal LEDs with slide-in labels and 25 System LEDs for information purposes. There are also 4 programmable function buttons with LED indication for confirmation of operation. The control panel consists of the latest dual flash-based microprocessor technology combined with a high resolution high contrast graphical LCD display and tactile keypad providing a simple select and click programming aid for engineer configuration and end-user operation.Compatible with AdvancedLive UKI only which is the fire panel monitoring solution that enables secure easy real-time management of an Advanced fire system. Powerful cause-and-effect programming and enhanced trace diagnostics make the panel suitable for a wide range of site applications from small to large complex multi-area systems. Fully programmable onsite via the onboard alphanumeric keypad or PC-NeT-022 configuration software.Key FeaturesConnectivity to AdvancedLive UKI only Ethernet connection on-board20 programmable Zonal 25 System LEDs.Apollo Argus Vega Hochiki Nittan Evolution protocol support.Advanced graphical LCD user interface and support for up to 200 fire zones by default allowing full EN54 compliance without additional hardware.Dedicated USB RS232 serial port for direct PC or modem connection.Installer friendly Auto-learn Loop Detection and Onboard Scope facility for ease of commissioning and fault finding.The graphical display can be configured to operate with virtually any language or character set and allow the installers logo to be applied using the Logo application software.Integral P-Bus for system expansion via available option cards.Advanced networking peer-to-peer system with up to 2000 zonesProgrammable push buttonsRack-mount optionsGlobal compliance3-year warrantyFully programmableInstallers logo application

GBP 2494.21
1

Advanced Touch Screen Terminal Fault Tolerant Network Touch-10FT

Advanced Touch Screen Terminal Fault Tolerant Network Touch-10FT

Advanced Touch Screen Terminal Fault Tolerant Network Touch-10FTTouchControl is a 10 high-resolution touch screen Remote Control Terminal with active maps and zone plans. It is a fire panel and network node in its own right and works on Advanceds standard and fault tolerant networks. It is compatible with our MxPro and Axis EN fire panels. Zone information is presented via the units colour coded easy-to-navigate interface and the active maps that are easily configured using the Dynamix Tools Map App. Using TouchControls colour-coded easy-to-navigate interface users canEvacuateMuteSilenceResound ResetView fires faults disablementsalarms inputs outputs supervisory and network via instant filtersViewenabledisable zonesViewenabledisable devicesEnabledisable outputs by typeEnable Walk Test modeTest displayzonesoutputsbuzzer and LEDsQuickly access all zones in firefaultdisablementtest via instant filters and where allowed change statusView 1000 general and 500 Fire event logSet network time and dateUsers can choose from five pre-set background images or upload their own. The relevant zone plan to the units position can be displayed and users can run presentations on the display which defaults to normal operation in the event of a fire condition or if the screen is touched. TouchControl enhances public areas and provides new levels of control and oversight.Key Features2 Part enclosure for easy first fix and slide-in installation.10high resolution screen designed to work with firemans glove At a glance system status immediately identify zones and devices in Fire Test Supervisory and FaultInteractive site maps and zone plans capability built-inMonitored external input for external PSU faultsTwo-core connection to the network fault tolerant or standardLow-profile bezel for flush fittingSelect from a number of background images or add a customised imageLow profile installationDedicated status indicators for Fire Fault System Fault Disabled Test and PowerZone plan display an essential part of BS5839-1Dual Power Supply inputs independently monitored to allow redundant power feeds

GBP 2708.26
1

Advanced MX-5404AE 1-4 Loop Fire Panel - 4 Loop Cards - Extended CoreProtocol

Advanced MX-5404AE 1-4 Loop Fire Panel - 4 Loop Cards - Extended CoreProtocol

Advanced MX-5404AE 1-4 Loop Fire Panel - 4 Loop Cards - Extended CoreProtocolThe MxPro 5 series is fully expandable from 1 to 4 loops and supplied with 4 onboard sounder circuits 20 programmable zonal LEDs with slide-in labels and 25 System LEDs for information purposes. There are also 4 programmable function buttons with LED indication for confirmation of operation. The control panel consists of the latest dual flash-based microprocessor technology combined with a high resolution high contrast graphical LCD display and tactile keypad providing a simple select and click programming aid for engineer configuration and end-user operation.Compatible with AdvancedLive UKI only which is the fire panel monitoring solution that enables secure easy real-time management of an Advanced fire system. Powerful cause-and-effect programming and enhanced trace diagnostics make the panel suitable for a wide range of site applications from small to large complex multi-area systems. Fully programmable onsite via the onboard alphanumeric keypad or PC-NeT-022 configuration software.Key FeaturesConnectivity to AdvancedLive UKI only Ethernet connection on-board20 programmable Zonal 25 System LEDs.Apollo Argus Vega Hochiki Nittan Evolution protocol support.Advanced graphical LCD user interface and support for up to 200 fire zones by default allowing full EN54 compliance without additional hardware.Dedicated USB RS232 serial port for direct PC or modem connection.Installer friendly Auto-learn Loop Detection and Onboard Scope facility for ease of commissioning and fault finding.The graphical display can be configured to operate with virtually any language or character set and allow the installers logo to be applied using the Logo application software.Integral P-Bus for system expansion via available option cards.Advanced networking peer-to-peer system with up to 2000 zonesProgrammable push buttonsRack-mount optionsGlobal compliance3-year warrantyFully programmableInstallers logo application

GBP 2685.85
1

Advanced MXP-545FT MxPro 5 Peripheral Expansion Network Node Fault Tolerant

Advanced MXP-545FT MxPro 5 Peripheral Expansion Network Node Fault Tolerant

Advanced MXP-545FT MxPro 5 Peripheral Expansion Network Node Fault TolerantThe Peripheral Expansion Network Node PENN provides the functionality of the MxPro 5 Series Fire Alarm Control Panels for use in bespoke graphical mimic connecting remote inputs and outputs directly to the network and other special build applications. The PENN allows a comprehensive range of peripherals to be connected to the network without having to install additional panels.Compatible expansion cards include Input MXP-537 Relay MXP-035 Mimic driver MXP-539 16 way Switch MXP-538 FanDamper Control MXP-543 Zone Monitor MXP-536 Sounder MXP-034 and ESPA Pager Interface MXP-547. Accessories such as a Display Card MXS-504 Printer MXP-512 and LED Indicators MXP-513-xxx can also be added.The PENN is pre-built to include either a Standard network or a Fault Tolerant FT network interface The unit is designed for easy wiring installation. Plug-in terminal blocks are provided for all connections to the unit. RS232 as well as USB Type B are built-in. The PENN is designed to be installed directly to mounting chassis plates such as MXM-515-6U MXM-515-8U etc. using six fixing screw positions. The chassis assembly can be mounted into MX-5000 and MX-5000R enclosures.Key FeaturesLets you install peripherals in remote locations without an additional panelDual Feed 24V DC Power Supply InputsNetwork in-built either Standard or Fault TolerantUp to 32 Nodes in Standard configuration and Up to 200 Nodes in FT configurationSupports up to 32 PBUS modules 16 of any one typeOption to connect standard MX-5000 Display andor MXP-512 internal printer andor MXP-513 LED cardsSwitch Input General purpose or External PSE fault monitorRS232 Interface PC Configuration External Printer or MXP-547 ESPAUSB Interface PC Configuration

GBP 1114.76
1

Advanced MxPro 4 MX-4020FT Remote Control Terminal with Fault Tolerant Network Interface

Advanced MxPro 4 MX-4020FT Remote Control Terminal with Fault Tolerant Network Interface

Advanced MxPro 4 MX-4020FT Remote Control Terminal with Fault Tolerant Network InterfaceBased around two core products the MxPro 4 Remote Display Terminal RDT and the fully functional MxPro 4 Remote Control Terminal RCT both utilise the same graphical LCD user interface that can be found on the MxPro 4 series fire panels and are based upon the same advanced flash based microprocessor technology.All MxPro 4 series panels and remote terminals can communicate over the same 2-core network cable. Integral network interface incorporating a special screen termination to prevent mains frequency earth-loop currents flowing between network nodes. The Ad-NeT network operates as a true peer-to-peer system with full cross panel reporting control and cause and effect functionality of up to 1000 zones.Key FeaturesNetworked for System DisplayNetworked for System Control24V DC Operating Voltage3 Year warrantyGraphical LCD DisplayAd-NeTAd-NeT CompatibleSmall Robust

GBP 1644.04
1

Advanced MxPro 4 MX-4020 Remote Control Terminal with Standard Network Interface

Advanced MxPro 4 MX-4020 Remote Control Terminal with Standard Network Interface

Advanced MxPro 4 MX-4020 Remote Control Terminal with Standard Network InterfaceBased around two core products the MxPro 4 Remote Display Terminal RDT and the fully functional MxPro 4 Remote Control Terminal RCT both utilise the same graphical LCD user interface that can be found on the MxPro 4 series fire panels and are based upon the same advanced flash based microprocessor technology.All MxPro 4 series panels and remote terminals can communicate over the same 2-core network cable. Integral network interface incorporating a special screen termination to prevent mains frequency earth-loop currents flowing between network nodes. The Ad-NeT network operates as a true peer-to-peer system with full cross panel reporting control and cause and effect functionality of up to 1000 zones.Key FeaturesNetworked for System DisplayNetworked for System Control24V DC Operating Voltage3 Year warrantyGraphical LCD DisplayAd-NeTAd-NeT CompatibleSmall Robust

GBP 934.91
1

Advanced MX-5101AM 1 Loop MxPro5 Fire Control Panel - Medium Core Protocol

Advanced MX-5101AM 1 Loop MxPro5 Fire Control Panel - Medium Core Protocol

Advanced MX-5101AM 1 Loop MxPro5 Fire Control Panel - Medium Core ProtocolThe MxPro 5 series control panels are supplied with a single loop driver card 2 on board sounder circuits 20 programmable zonal LEDs with slide-in labels and 25 system LEDs for information purposes. There are also 4 programmable function buttons with LED indication for confirmation of operation. The control panel consists of the latest dual flash-based microprocessor technology combined with a high resolution high contrast graphical LCD display and tactile keypad providing a simple select click programming aid for engineer configuration and end user operation.Powerful cause-and-effect programming coupled with dynamic zoning and enhanced trace diagnostics makes the panel suitable for a wide range of site applications from small to large complex multi-area systems. The panel is fully programmable on-site via the on-board alphanumeric keypad or PC-NeT Configuration Software. An extensive suite of user-friendly Windows based PC software programs has been developed to enhance your experience when using MxPro 5 series fire panels.The suite incorporates a number of different programmes which include configuration service logo and virtual panel tools to allow the flexibility of the equipment to be fully explored. Simply adding a network card allows the panel to communicate with any other MxPro 5 fire panel remote terminal or network periferal such as ipGateway BMS or graphical interface. The network operates as a true peer-to-peer system and can be configured in a fault tolerant loop or radial format.Key Features20 programmable Zonal 25 System LEDs.Advanced graphical LCD user interface and support for up to 200 fire zones by default allowing fullEN54 compliance without additional hardware.Dedicated USB RS232 Serial Port for direct PC or modem connection.Installer friendly Auto-learn Loop Detection and On-board Scope facility.Graphical display configurable for virtually any language.Robust removable equipment chassis with plug-in connectors for simple fixing and cable termination.Integral P-Bus for system expansion via available option cards.Ad-NeT peer-to-peer network with up to 2000 zonesApproved to BS EN54 part 2 4 and 13

GBP 1109.32
1