24 tulokset (0,17694 sekuntia)

Näytä kaikki suodattimet

Tuotemerkki

Kauppias

Hinta (euroa)

Näytä kaikki

Nollaa suodatin

Tuotteet
Alkaen
Kaupat

Schneider Electric Loop rail 8 pole for connection of RGZE and RSZE sockets for RXG and RSB relays - Saehkoekeskustarvikkeet - RGZS08

Schneider Electric Loop rail 8 pole for connection of RGZE and RSZE sockets for RXG and RSB relays - Saehkoekeskustarvikkeet - RGZS08

Zelio RXG is a series of plug-in relays for DIN-rail mounting.With a width of only 16 mm. The relays do not take up valuable space in the panel and the 4 different versions make them suitable for any application.The RXG relays can also be used in socket from different suppliers as the placement of the pins on the relays is identical.The unique test button makes it possible to test and operate without any tool and with just one finger.Zelio RXG is available with both 1 changeover contact for 10A and 2 changeover contacts for 5A loads.It is possible to get RXG in a transparent version or a version with either a test button, LED or both combined.The protection modules (diode, diode + LED, RC-circuit or Varistor + LED) are easilly fitted to the socket and are the same for both RXG, RSB or RXM relays. Legends are available for all RXG or RSB socket which makes it possible to identify both socket and relay.RGZS08 is a busjumper for connecting up to 8 sockets on a DIN-rail in a panel.The pins a slightly bended which makes it easy to mount 2 jumpers in parallel and still have room for the wiring.RGZS08 fits both the RGZE1S35M and RGZE1S48M socket.

EUR 12.58
1

Schneider Electric Acti9 vigi ic40 add on residual current modul 3 pol + nul 40a 30ma class a - Saehkoekeskustarvikkeet - A9Y80740

Schneider Electric Acti9 vigi ic40 add on residual current modul 3 pol + nul 40a 30ma class a - Saehkoekeskustarvikkeet - A9Y80740

Residual current module 3P + N, 40A, 30mA, Class A. A fault current Vigi iC40 module is an add-on module for Acti9 iC40 type of circuit breakers. The result is optimum protection of humans, installations and electrical devices against over-currents, fault, an electric shock by direct and indirect contact, transients and fire hazard. This Vigi iC40 fault current module is 3 pole, marked to 40A, 400V and has a sensitivity of 30mA. The unit has test button on the front and is equipped with Schneider Electric's patented VisiTrip TM technology, which ensures rapid troubleshooting with clearly marked on the front. The module is 90 mm wide and easy mounting of clips on a DIN rail with automatic fuse.

EUR 69.10
1

Schneider Electric Acti9 Signal contact iOF 1OC 100mA to 6A for iC60 Double terminal screw terminal top 24...415V AC & - Saehkoekeskustarvikkeet -

Schneider Electric Acti9 Signal contact iOF 1OC 100mA to 6A for iC60 Double terminal screw terminal top 24...415V AC & - Saehkoekeskustarvikkeet -

Dette Acti9 elektriske hjælpeudstyr er en modulær OC-kontakt, der bruges som fjernindikation af positionen af den tilknyttede enhed Den nominelle strøm (In) er fra 100mA til 6A med en driftsfrekvens på 50Hz til 60Hz ved 24VAC til 415VAC og fra 100mA til 6A ved 24VDC til 130VDC. Den har 1 positionskontakt med kontakter type 1 C/O. Den er beregnet til ny eller renoveret installation i små erhverv, bygninger, kritiske bygninger, sundhedspleje, industri, datacenter og infrastrukturer. Denne OC-kontakt er kompatibel med Acti9-serier såsom iC60 dobbeltterminaler og iID dobbeltterminaler. iOF bruges enten til enhedens korte navn eller kompatibilitetskode. Den har en skrueklemmetilslutning øverst. Tilslutningen tillader stift kobberkabel. Kabeltværsnitskapaciteten er fra 1 mm2 til 4 mm2. Den har en skrueklemmetilslutning øverst. Tilslutningen tillader fleksibelt kobberkabel. Kabeltværsnitskapaciteten er fra 0,5 mm2 til 2,5 mm2. Den har en skrueklemmetilslutning øverst. Tilslutningen tillader stive kobberkabler (2 kabler). Kabeltværsnitskapaciteten er 2,5 mm2. Den har en skrueklemmetilslutning øverst. Tilslutningen tillader fleksibel med ferrule kobberkabler (2 kabler). Kapaciteten af kabeltværsnittet er 1,5 mm2. Den nominelle isolationsspænding (Ui) er op til 500V. Den har en nominel impulsmodstandsspænding (Uimp) på 4kV. Målene er (B) 9mm x (H) 86mm x (D) 73mm. Produktets farve er hvid (RAL 9003). Forureningsgraden er 3. Tropicaliseringsniveauet er behandling 2. Tilslutningsmomentet er 1N. (nederst) for PZ1 skruetrækker type. I henhold til IEC 60529-standarden er IP-beskyttelsesgraden IP20. Driftstemperaturen er fra -25°C til +70°C. Opbevaringstemperaturen er fra -40°C til +85°C.

EUR 20.81
1

Schneider Electric Runko 3p katkaisija 40a - Saehkoekeskustarvikkeet - METSEPM3250

Schneider Electric Runko 3p katkaisija 40a - Saehkoekeskustarvikkeet - METSEPM3250

PM3200 voi mitata I, U, V, P, Q, S, PF ja Hz. PM32xx-sarja on hinnaltaan edullinen ja ominaisuuksiltaan rikas DIN-kiskoon asennettava sähkömittari, joka tarjoaa kaikki tarvittavat mittausominaisuudet sähköasennuksen valvontaan. PM32xx-sarja sopii erinomaisesti tehonmittaukseen ja verkon seurantaan. Tavoitteena on parantaa sähköjakelujärjestelmän saatavuutta ja luotettavuutta. Mittareilla voidaan myös tukea alaista laskutusta ja kustannusjaon hallintaa. Power Logic PM32xx -energiamittarisarjat ovat täysin yhteensopivia Acti 9 -viestintäjärjestelmän kanssa helpottaen sähköjakelun integroimista tilanhallintajärjestelmään.Sarjan yleisiä ominaisuuksia ovat:-Taustavalolla varustettu näyttö-Graafinen näyttö monikielisellä tuella-Standardien IEC 61557-12, IEC 62053-21/22 sekä IEC 62053-23 mukainen noudattaminen-Mitta-luokka 0.5S-Jopa neljä tariffia-Ulkoinen virtalähde (110-415 V L-N/L-L)-Syöttövirta:1A/5A (CTS)-Kompakti koko -Kaksoiskiinnitys DIN-kiskoon-Turvatoiminnot estävät tietojen manipuloinnin.

EUR 550.70
1

Schneider Electric Zelio socket with push-in spring clamps for RXG relays with 2 contact sets - Saehkoekeskustarvikkeet - RGZE08P

Schneider Electric Zelio socket with push-in spring clamps for RXG relays with 2 contact sets - Saehkoekeskustarvikkeet - RGZE08P

Zelio RXG are a series of plug-in relays with a width of only 16 mm and robust faston connectors which is compatible with similar relays from other vendors. The relays are available with 1 C/O contact with 10A or 2 C/O contacts with 5A maximum load and it is possible to get them with or without lockable testbutton and status LED.A protection module (diode, varistor or RC-circuit) can be inserted into the socket if needed.The sockets RGZExxxx has separate terminals for supply and load which simplify troubleshooting and mounting of the relays.RGZE08P is a socket with separate push-in terminals that fits with RXG relays with 2 C/O contacts.The socket has a width of 16 mm and protection modules can be inserted directly next to the supply terminals.The integrated holding clip protect the relay from falling out when inserted into the socket.The socket has push-in terminals for easy wiring without the use of any tool and optimum protection against vibrations.The RGZE08P fits all RXG2xxx plug-in relays with 2 C/O contacts.Additional marking of the socket can be done with the RSZL300 legend which is easily mounted on the sockets.Each terminal have room for 2 wires with a wire size between 0,5..1,5 mm2 and there is a integrated test point built into the socket.For connecting more than one socket to the same supply, the RSZS02 jumper is inserted next to the A2 terminal and it works across the ranges.The socket is marked with both NEMA and IEC markings.

EUR 15.83
1

Schneider Electric Extended rotary handle ComPacT NSX 100/160/250 black handle shaft length 185 to 600 mm IP55 - Saehkoekeskustarvikkeet - LV429338T

Schneider Electric Extended rotary handle ComPacT NSX 100/160/250 black handle shaft length 185 to 600 mm IP55 - Saehkoekeskustarvikkeet - LV429338T

It is an extended rotary handle for ComPacT NSX 100/160/250, PowerPact Multistandard H/J frames and EasyPact CVS 100/160/250 devices. It is suitable for isolation and it is used for standard applications. It maintains the access to trip unit settings and to the push to trip button. It is equipped with a standard black handle. There is an indication of the three device positions O (OFF), I (ON) and tripped. This extended version makes possible to operate devices installed at back of switchboards, from the switchboard front. The distance between the back of the circuit breaker and the switchboard door is from 185mm to 600mm. The degrees of protection are IP55 and IK08. This rotary handle is padlockable in the OFF position using 1 to 3 padlocks not supplied (shackle diameter 5 to 8mm). As an option, it is possible to install a Ronis or Profalux keylock on the base of the handle to obtain the same function as with a padlock.

EUR 131.73
1