54 tulokset (0,17807 sekuntia)

Näytä kaikki suodattimet

Tuotemerkki

Kauppias

Hinta (euroa)

Nollaa suodatin

Tuotteet
Alkaen
Kaupat

Rems Electric pressure test pump E-Push 2 - Tyoekalut putkitoeihin - 115500 R220

Rems Electric pressure test pump E-Push 2 - Tyoekalut putkitoeihin - 115500 R220

Powerful, electric pressure testing pump for pressure and tightness tests of piping systems and receptacles. Testing and pressure range p 60 bar/6 MPa/870 psi. Pumping capacity 6.5 l/min water, hydrous solutions, emulsions, ph-value of liquids 7-10, temperature of liquids 60°C, viscosity of liquids 1.5 mPa s.REMS E-Push 2 - electric charging and testing. Up to 60 bar. With adjustable pressure limiting. 1300 W. Self sucking.

EUR 996.10
1

Rems Flushing/filling unit Solar-Push K - Tyoekalut putkitoeihin - 115312 R220

Rems Flushing/filling unit Solar-Push K - Tyoekalut putkitoeihin - 115312 R220

REMS Solar-Push K 60. Electric filling and flushing unit for easy and quick filling, flushing and venting of closed systems. In carton. Transport performance = 36 l/min., container volume 30 l. With centrifugal pump, temperature resistant for constant load = 60°C. Shipping pressure = 5.5 bar/0.55 MPa/80 psi. Condenser motor 230 V, 50 Hz, 860 W. 2 pcs. flexible, transparent woven PVC hoses 1/2" T60, each 3 m long, temperature resistant = 60°C.

EUR 997.90
1

Rems Pliers up 16 - Tyoekalut putkitoeihin - 572632

Rems Pliers up 16 - Tyoekalut putkitoeihin - 572632

REMS pressing tongs High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour. Hence far closer tolerances compared to as cast pressing contour.Drive through all REMS radial presses (except REMS Mini-Press ACC) and suitable radial presses of other makes. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs/pressing rings with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the pressed fitting after the pressing process. This enables the user to check again whether the most suitable pressing tongs or the suitable pressing ring have been used to make the pressfit connection even after the pressing process.With this tracability REMS fulfills the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

EUR 232.40
1

Rems Pressing pliers up 25 - Tyoekalut putkitoeihin - 572638

Rems Pressing pliers up 25 - Tyoekalut putkitoeihin - 572638

REMS pressing tongs High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour. Hence far closer tolerances compared to as cast pressing contour.Drive through all REMS radial presses (except REMS Mini-Press ACC) and suitable radial presses of other makes. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs/pressing rings with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the pressed fitting after the pressing process. This enables the user to check again whether the most suitable pressing tongs or the suitable pressing ring have been used to make the pressfit connection even after the pressing process.With this tracability REMS fulfills the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

EUR 215.90
1

Rems Pressing pliers up 20 - Tyoekalut putkitoeihin - 572636

Rems Pressing pliers up 20 - Tyoekalut putkitoeihin - 572636

REMS pressing tongs High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour. Hence far closer tolerances compared to as cast pressing contour.Drive through all REMS radial presses (except REMS Mini-Press ACC) and suitable radial presses of other makes. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs/pressing rings with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the pressed fitting after the pressing process. This enables the user to check again whether the most suitable pressing tongs or the suitable pressing ring have been used to make the pressfit connection even after the pressing process.With this tracability REMS fulfills the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

EUR 216.90
1

Rems Pressing pliers Mini up 16 - Tyoekalut putkitoeihin - 578578

Rems Pressing pliers Mini up 16 - Tyoekalut putkitoeihin - 578578

REMS pressing tongs Mini Very compact design and low weight of the REMS Mini pressing tongs due to special arrangent of the pressing tongs connection (Patent EP 1 952 948).High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour.Drive through REMS Mini-Press ACC drive unit. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs Mini with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the g after the pressing process. This enables the user to check again whether the most suitable pressing tongs have been used to make the pressfit connection even after the pressing process.With this traceability REMS fulfils the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

EUR 228.90
1

Rems Crimping pliers Mini up 25 - Tyoekalut putkitoeihin - 578584

Rems Crimping pliers Mini up 25 - Tyoekalut putkitoeihin - 578584

REMS pressing tongs Mini Very compact design and low weight of the REMS Mini pressing tongs due to special arrangent of the pressing tongs connection (Patent EP 1 952 948).High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour.Drive through REMS Mini-Press ACC drive unit. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs Mini with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the g after the pressing process. This enables the user to check again whether the most suitable pressing tongs have been used to make the pressfit connection even after the pressing process.With this traceability REMS fulfils the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

EUR 229.51
1

Rems Crimping pliers Mini up 20 - Tyoekalut putkitoeihin - 578582

Rems Crimping pliers Mini up 20 - Tyoekalut putkitoeihin - 578582

REMS pressing tongs Mini Very compact design and low weight of the REMS Mini pressing tongs due to special arrangent of the pressing tongs connection (Patent EP 1 952 948).High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour.Drive through REMS Mini-Press ACC drive unit. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs Mini with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the g after the pressing process. This enables the user to check again whether the most suitable pressing tongs have been used to make the pressfit connection even after the pressing process.With this traceability REMS fulfils the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

EUR 229.18
1

Rems Crimping pliers Mini up 32 - Tyoekalut putkitoeihin - 578586

Rems Crimping pliers Mini up 32 - Tyoekalut putkitoeihin - 578586

REMS pressing tongs Mini Very compact design and low weight of the REMS Mini pressing tongs due to special arrangent of the pressing tongs connection (Patent EP 1 952 948).High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour.Drive through REMS Mini-Press ACC drive unit. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs Mini with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the g after the pressing process. This enables the user to check again whether the most suitable pressing tongs have been used to make the pressfit connection even after the pressing process.With this traceability REMS fulfils the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

EUR 239.81
1

Rems Swing 12-15-18-22 soft tubes - Tyoekalut putkitoeihin - 153025 R

Rems Swing 12-15-18-22 soft tubes - Tyoekalut putkitoeihin - 153025 R

REMS Swing set. One-handed pipe bender Ø 10-32 mm, Ø 3/8"-7/8", up to 90°. Soft copper tubes Ø 10-22 mm, Ø 3/8-7/8", s=1mm, soft plastic coated copper tubes Ø 10-18 mm, Ø 3/8"-5/8", s = 1mm, plastic coated C-steel pipe for press fitting system Ø 12-18 mm, mild precision steel pipe Ø 10-18 mm, s=1mm, plastic pipe with metallic insert Ø 14-32 mm. Up to Ø 26 mm with bends, bend segments, universal stop with sliding pieces, in stable steel case/ case. Up to Ø 32 mm with bends, bend segments, 2 stops with sliding pieces, in stable case.

EUR 399.30
1

Rems Pipe scissors ROS P26/SW 35 - Tyoekalut putkitoeihin - 291242

Rems Pipe scissors ROS P26/SW 35 - Tyoekalut putkitoeihin - 291242

Robust quality tool for neat, fast cutting of pipes. With integrated pipe scissors for corrugated pipes. Stable execution of magnesium. For one-handed operation. P plastic pipe, plastic pipe with metallic insert ? Ø 26 mm, ? Ø 1" SW plastic corrugated pipe Ø 18 - 35 mm, Ø 3/4 - 1 3/8" REMS ROS P 26/SW 35 - Fast cutting with one cut up to Ø 26 mm. With integrated pipe cutter for plastic corrugated pipe up to Ø 35 mm.

EUR 141.30
1

Rems Accu-press ACC Li-ion 14.4V - Tyoekalut putkitoeihin - 571014 R220

Rems Accu-press ACC Li-ion 14.4V - Tyoekalut putkitoeihin - 571014 R220

Universal, handy electric tool with automatic circuit control for producing pipe pressing joints for all common pressfitting systems. For battery and corded operation. Pressing joints Ø 10-108 mm / 3/8 - 4. Complete range of REMS pressing tongs/pressing rings for all common pressfitting systems.REMS Akku-Press ACC Li-Ion - universal up to Ø 108 mm / 4.With automatic circuit control and electronic service control. Secure crimping in seconds. Automatic locking of pressing tongs

EUR 1504.39
1

Rems Tiger bayonet saw w/bracket - Tyoekalut putkitoeihin - 560027 R220

Rems Tiger bayonet saw w/bracket - Tyoekalut putkitoeihin - 560027 R220

REMS Tiger ANC VE set. Electric pipe bayonet saw with vario electronics (VE) for easy, fast, perpendicular sawing with pipe holder and for freehand sawing up to 6", 250 mm. Machine with spade handle, maintenance-free, water and dust protected oscillation drive with versatile needle bearing drive (ANC) , aggressive orbital stroke, 230 V, 1050 W, safety rocker switch. Universal saw blade holder for 2". 2 REMS special saw blades 2". In a stable steel case.

EUR 848.70
1

Rems Mini-press ACC Li-ion 14.4V - Tyoekalut putkitoeihin - 578012 R220

Rems Mini-press ACC Li-ion 14.4V - Tyoekalut putkitoeihin - 578012 R220

Universal, super handy electric tool with automatic circuit control for producing pipe pressing joints for all common pressfitting systems. For battery and corded operation. Pipe pressing joints Ø 10-40 mm, 3/8 - 1 1/4. REMS pressing tongs Mini. REMS Mini-Press ACC - universal up to Ø 40 mm / 1 1/4.Super light, super small, super handy. With automatic circuit control. Secure crimping in seconds. Automatic locking of pressing tongs. Assortment of REMS pressing tongs Mini for all common pressfitting systems

EUR 1153.01
1

Rems Mini-Press S 22V ACC Basic-Pack - Tyoekalut putkitoeihin - 578015 R220

Rems Mini-Press S 22V ACC Basic-Pack - Tyoekalut putkitoeihin - 578015 R220

Universal, super handy electric tool with automatic circuit control for producing pipe pressing joints for all common pressfitting systems. For battery and corded operation. Pipe pressing joints Ø 10-40 mm, 3/8 - 1 1/4. REMS pressing tongs Mini.REMS Mini-Press ACC - universal up to Ø 40 mm / 1 1/4. Super light, super small, super handy. With automatic circuit control. Secure crimping in seconds. Automatic locking of pressing tongs. Assortment of REMS pressing tongs Mini for all common pressfitting systems

EUR 1326.28
1

Rems Mini-Press 22V ACC - 578010 R220 - Tyoekalut putkitoeihin

Rems Mini-Press 22V ACC - 578010 R220 - Tyoekalut putkitoeihin

Universal, super handy electric tool with automatic circuit control for producing pipe pressing joints for all common pressfitting systems. For battery and corded operation. Pipe pressing joints Ø 10-40 mm, 3/8 - 1 1/4. REMS pressing tongs Mini.REMS Mini-Press ACC - universal up to Ø 40 mm / 1 1/4. Super light, super small, super handy. With automatic circuit control. Secure crimping in seconds. Automatic locking of pressing tongs. Assortment of REMS pressing tongs Mini for all common pressfitting systems

EUR 1482.23
1

Rems Pipe cutting machine Cento - Tyoekalut putkitoeihin - 845001 R220

Rems Pipe cutting machine Cento - Tyoekalut putkitoeihin - 845001 R220

Light, portable compact machine. Universal for cutting and deburring pipes. For trade and industry. For the building site and the workshop.Stainless steel pipes of pressfittingsystems, carbon steel, copper Ø 8 - 108 mmSteel pipes EN 10255 (DIN 2440) DN 10 - 100 Ø 14 - 4, Ø 14 - 115 mmCast iron pipes (SML) EN 877 (DIN 19522) DN 50 - 100Plastic pipes SDR 11 Wall thickness s 10 mm Ø 10 - 110 mmMultilayer composite pipes Ø 10 - 110 mmREMS Cento - Cutting and deburring up to Ø 115 mm. Super fast. Right angled. Chip-free. No outer burr. Dry cutting. Universal for many pipe types.

EUR 1878.90
1

Rems Hydro-Swing set 12-15-18-22 - Tyoekalut putkitoeihin - 153525 R

Rems Hydro-Swing set 12-15-18-22 - Tyoekalut putkitoeihin - 153525 R

Power-saving oil-hydraulic manual pipe bender for precise bending of pipes up to 90°. Bend the pipe at the workplace. For crafts and industry. For construction sites and workshops. Soft copper tubes, also thin-walled Ø 10 - 22 mm, Ø 3/8 - 7/8", s ? 1 mm Soft, plastic-coated copper tubes Ø 10 - 18 mm, Ø 3/8 - 5/8" s ? 1 mm Pipes for pressfitting systems: Stainless steel Ø 12 - 22 mm s ? 1.2 mm C-steel, soft plastic coated Ø 12 - 18 mm s ? 1.2 mm Mild precision steel tubes Ø 10 - 22 mm s ? 1.5 mm Plastic pipe with metallic insert Ø 14 - 32 mm

EUR 1040.80
1