17 tulokset (0,18169 sekuntia)

Näytä kaikki suodattimet

Tuotemerkki

Kauppias

Hinta (euroa)

Nollaa suodatin

Tuotteet
Alkaen
Kaupat

Einhell cordless polishing machine CE-CP 18/180 - 2093320

Einhell cordless polishing machine CE-CP 18/180 - 2093320

The einhell ce-cp 18/180 li e-solo cordless polishing/sanding machine offers the freedom of cordless operation for the user on jobs in the home, workshed and garage. The cordless polishing/sanding machine is a member of the power x-change series, so rechargeable batteries from this system series can be used in all pxc devices. The cordless polishing/sanding machine is powered by a brushless motor – a long-lasting electric motor. The 2-in-1 product makes it possible: polishing and sanding with a single tool. A large polishing disk with a diameter of 180 millimeters enables speedy work. Thanks to the electronic speed control via lcd display, diy enthusiasts can adjust the speed to each specific application easily and with just a glance. For comfortable operation there is an ergonomic handle for an optimum grip and controlled handling and the slimline design with softgrip. The hook-and-loop fastener enables attachments to be changed quickly. For unproblematic fastening of the polishing disk there is a spindle locking system. This product comes without a battery or charger. These are available separately, for example as a practical starter set. For optimum results the use of the 2.6 ah plus rechargeable battery or higher from einhell is recommended.

EUR 152.90
1

Einhell column drilling machine TE-BD 550 E - 4250690

Einhell column drilling machine TE-BD 550 E - 4250690

The einhell te-bd 550 e pillar drill is a precision tool for tough jobs. Holes can be drilled with pinpoint accuracy into workpieces made of a wide variety of materials such as wood or metal – with a maximum drilling depth of up to 60 mm. The lcd display allows the user to keep an eye on the current speed at all times. The infinitely adjustable speed control requires no tools for adjustment. The high-quality quick-change chuck easily accommodates the desired drill bit with a diameter from 0-13 mm. The quiet, smooth-running induction motor ensures comfortable operation. The drill table can also be adjusted in height, tilted and swiveled to enable optimum operation. The folding chip guard with microswitch provides additional user safety. The depth stop can be adjusted to enable precise drilling in series operation, while the drill spindle with ball bearings gives the pillar drill a long life.

EUR 336.90
1

Einhell Cordless tile cutting machine TE-TC 18/115 Li - Solo, 18V, tile cutter (red/black, without battery and charger)

Einhell Cordless tile cutting machine TE-TC 18/115 Li - Solo, 18V, tile cutter (red/black, without battery and charger)

The einhell te-tc 18/115 li-solo tile cutting machine, being powered by a rechargeable battery from the high-performance power x-change family, is a “lightweight” among tile cutters and can be used with flexibility anywhere and everywhere – far away from any sources of electricity such as socket outlets or generators. The batteries with the high-grade lithium-ion cells can be combined with all members of the power x-change family. The rechargeable batteries from the power x-change series are available separately, e.g. As a practical starter set. The tile cutting machine has a table which can be tilted and which has an angle scale from 0° to 45°, plus an adjustable angle stop for miter cuts with settings from -45° to +45° degrees. The maximum cutting depth at 45° is 16 mm and at 90° it is 24 mm. The parallel stop with scale is for performing exact straight cuts. An integrated water container provides the cutting disc with sufficient cooling during cutting, and a cutting wheel guard provides essential safety. Non-slip, low-vibration feet ensure a secure and steady standing position. For mobility the low-weight cordless tile cutter has a carrying option the product is supplied complete with a diamond cutting disc and tool. The pxc rechargeable battery and charger are available separately.precise and dust-freetiltable workbench with water containerthe einhell cordless tile cutter te-tc 18/115 li-solo is equipped with a work table that can be tilted from 0° to 45°, enabling even difficult mitre cuts to be made. The integrated water tank with minimum and maximum level indicator ensures effortless and clean results with a fine cutting view. The water from the container cools the saw blade and reduces dust generation.safe usethe cordless tile cutter is switched on at the side with the push of a button. The emergency stop switch also offers ultimate safety.fixed standingnon-slip rubber feet ensure low-vibration and secure standing when the tile cutting machine.practical protectionthe integrated cutting disc protection offers the necessary safety and also protects against splashing water.precise cutsperfectly straight cuts are possible with the parallel stop with scale and the individually adjustable angle stop.mobile and ready to useflexibility on any construction site – with the einhell cordless tile cutterfrom the bathroom, to the basement, to the kitchen – with the einhell cordless tile cutting machine te-tc 18/115 li-solo, you can work more flexibly than ever before. Thanks to the power x-change battery, the compact tile cutter can be used anywhere on the construction site without having to rely on a power connection. This means that tiles can be cut and laid in no time. The compact device can be easily transported with the help of the carrying handles.

EUR 144.90
1

Einhell grinding and engraving tool TC-MG 135 E, straight grinder (red/black, 135 watts)

Einhell grinding and engraving tool TC-MG 135 E, straight grinder (red/black, 135 watts)

The tc-mg 135 e grinding and engraving tool is a high quality, compact machine which is suitable for an enormous number of different applications for drilling, cutting, grinding and brushing thanks to its extensive range of accessories. The spindle lock enables you to remove the various attachments quickly and change them easily. Electronic speed control ensures smooth starting and enables the power to be adjusted exactly to the particular task. The tc-mg 135 e features a flexible shaft with which various areas of the workpiece can be machined skillfully and easily. During use, the tool can also be conveniently mounted on the the telescopic stand and related hook. The machine is easy to hold thanks to its soft grip and ergonomic design. The extensive 189-piece accessory set for grinding, drilling, cutting and much more is also included in the package - with everything stored practically in a case.

EUR 68.90
1

Einhell Impact Drill TC-ID 650 E (red / black, 650 watts)

Einhell Impact Drill TC-ID 650 E (red / black, 650 watts)

Product descriptionthe impact drill drive tc-id 650 e is a versatile device that supports do-it-yourselfers at their working applications all around the house, workshop and garage well. With its functions drilling and impact drilling and reversing for drilling and screwing, it is a helpful aide for all drill-driving works. The different drilling tools can be fixed quickly and without tools in the practical quick action drill chuck. The speed of the drilling machine can be preselected and adjusted precisely with the inbuilt speed control electronics. A constant drilling depth during serial drillings is guaranteed by the precisely adjustable and stable metal depth stop. The operation switch can additionally be fixed for continuous operation. To have your hands free between the drilling works, a practical belt hook is provided at the housing.

EUR 38.90
1

Einhell CC-PO 1100/150 E

Einhell CC-PO 1100/150 E

For the ambitious do-it-yourselfer the einhell polishing/sanding machine cc-po 1100/150 e is the powerful, robust and handy expert polishing and grinding device. It is ideal for polishing of varnished surfaces as well as grinding of wood, plastics and metal. Thanks to its soft grip this device can be handled safely at any time, and operations as polishing of cars can be performed quickly and thoroughly. For varnish care the large additional handle enables best control and precise results. By the finely adjustable electronic speed control the speed of the polishing or grinding attachments can be optimally adapted to the surface being processed. With the practical spindle lock the spindle can be blocked without tools. Thus, the grinding disk on the polisher can be changed quickly and easily. The grinding disk is equipped with a special hook-and-loop fastener in order to fix the polishing and grinding attachments safely on the electric grinder and to prevent entering of dust between disk and grinding paper. The polishing and grinding attachments can be still easily loosened and they can be changed quickly if requested. The comprehensive polishing and grinding accessories consist of 1 foam attachment for e.g. Car polishing, 2 synthetic polishing caps and grinding paper disks of 60, 80 and 120 granulation with 2 of each. The polishing and grinding device is delivered in a practical stowage case of robust plastics.get started immediately with the right accessoriesthe einhell cc-po 1100/150 e polishing and sanding machine is delivered with the appropriate high-quality accessories suitable for various surfaces so that you can start work immediately. The scope of delivery includes 1x foam attachment, 2x synthetic polishing bonnets and respectively 2x sandpaper with 60, 80 and 120 grit. So nothing stands in the way of your next polishing and sanding work!large polishing discthe polishing disc has a diameter of 150 mm. This means that polishing and grinding work can be done in no time, even on larger surfaces.useful spindle lockthanks to the spindle lock, the polishing disc can be removed at any time without tools and reattached quickly and easily.flexible speed controlthe speed control allows the speed to be optimally adjusted to different surfaces between 500 and 3000 rpm.comfortable handlingthanks to its soft grip this device can be handled safely and comfortably at any time.a multi-talent for every workshop and garagewith the einhell cc-po 1100/150 e polishing and grinding machine, you get two tools in one. The compact and handy device grinds and polishes powerfully with 1.100 watts and a maximum idle speed of 3.500 rpm. This enables fast and precise results!

EUR 84.90
1

Einhell double grinder TC-XG 75 kit - 4412559

Einhell double grinder TC-XG 75 kit - 4412559

The einhell tc-xg 75 kit double wheel grinder is a flexible machine for a wide range of tools: for drill bits and cutters, cutting blades and chisels, and for scissors, knives and blades. The flexible shaft allows for precision working. In addition, the rotational speed can be adjusted to suit the application. Thanks to the extensive accessories included in the einhell kit, the double wheel grinder can also be used for performing cutting work, cleaning work and polishing and sanding/grinding work easily and safely. Four rubber feet provide reliable, low-vibration stability. The adjustable work supports make the double wheel grinder easy to work with for the different applications. The adjustable spark guard windows can be adjusted without the need for any tools. Long service life thanks to robust compact metal construction. The double wheel grinder has a ball bearing mounted shaft for precise operation without motion. In addition, the guard hood is closed at the sides for safe operation.

EUR 90.90
1

Einhell TC-BD 450 column drill (red/black, 450 watts)

Einhell TC-BD 450 column drill (red/black, 450 watts)

Article descriptionthe einhell tc-bd 450 bench drill is a precision tool for special demands: a pillar drill enables holes to be drilled in workpieces made of wood or metal with pin-point accuracy. An output of 450 w and 5 speed settings to suit all materials form the basis for precision drilling jobs. For fast and exact results there is an adjustable depth stop. The maximum drilling depth is 50 mm. This pillar drill features a robust ring gear chuck that can take the most common drill bit sizes. The drill spindle with ball bearings results in long-lasting and easy use. For variability this pillar drill comes with an infinitely height-adjustable drill table . It is also possible to rotate and tilt the drill table. A welcome feature for applying pressure exactly is the rubberized, three-arm capstan. For safety during use there is a folding chip guard, and the on/off switch with zero-voltage release function prevents the machine from starting up again unintentionally after a power failure.

EUR 152.90
1

Einhell TC-BD 500 column drill (red/black, 450 watts)

Einhell TC-BD 500 column drill (red/black, 450 watts)

Article descriptionthe einhell tc-bd 500 pillar drill is a precision tool for special demands: a pillar drill enables holes to be drilled in workpieces made of wood or metal with pin-point accuracy. An output of 500 w and 9 speed settings to suit all materials form the basis for precision drilling jobs. For fast and exact results there is an adjustable depth stop. The maximum drilling depth is 50 mm. This pillar drill features a robust ring gear chuck that can take the most common drill bit sizes. The drill spindle with ball bearings results in long-lasting and easy use. For variability this pillar drill comes with an infinitely height-adjustable drill table . It is also possible to rotate and tilt the drill table. A welcome feature for applying pressure exactly is the rubberized, three-arm capstan. For safety during use there is a folding chip guard, and the on/off switch with zero-voltage release function prevents the machine from starting up again unintentionally after a power failure.

EUR 178.90
1

Einhell angle grinder TE-AG 115/600

Einhell angle grinder TE-AG 115/600

The te ag 115 angle grinder is a high-quality tool for experts with exacting demands, whose strong points are demonstrated to the full on a broad spectrum of cutting, grinding and roughing jobs everywhere in the home, workshop and garage. A wheel guard with no-tool quick-adjust facility can be adapted with just a twist of the hand to any task, while the spindle stop permits easy and speed tool change. The te-ag 115 features a sturdy flat metal gear head which provides excellent power transfer and low vibration operation, both of which help working in areas with difficult access. Thanks to its slim housing and soft grip on both the main handle and additional handle, the angle grinder offers a very high level of user-friendliness. In addition, the additional handle can be secured in three different positions for optimum adaptation to the particular workpiece, thus ensuring a reliable hold for comfortable and safe operation. The face spanner is stored in the additional handle so that it is always within reach. A cable clip for securing the wound-up cable keeps the te-ag 115 neat and safe when stored away. The machine is supplied without a cutting wheel.

EUR 48.90
1

Einhell jigsaw TE-JS 100 - 4321160

Einhell jigsaw TE-JS 100 - 4321160

The te-js 100 e is a powerful model for ambitious sawing jobs on any material. Individual sawing of the material is possible thanks to the adjustable pendulum stroke with 4 settings and the blade speed control electronics. The fact that the saw blades can be replaced without tools permits the use of t- and u-shaft blades and also saves valuable time. Its ergonomic soft grip makes the te-js 100 very comfortable to hold. A sturdy aluminum soleplate is adjustable without the need for tools and underlines the quality of the machine. It can also be swiveled to allow miter cuts at angles of up to 45°. An effective chip guard produces excellent surface quality. Thanks to an integrated led light and hinged view guard you have a good and safe view of the workpiece at all times, while the parallel stop ensures controlled and accurate sawing. A saw blade for wood is included so that you can start sawing straight away. A selectable dust blowing function, practical cable clip and adapter for dust extraction keep the work area clean and tidy. The te-js 100 is stored neatly and safely in a practical transport and storage case.

EUR 100.90
1

Einhell Angle TE-AG 115 red

Einhell Angle TE-AG 115 red

The te ag 115 angle grinder is a high-quality tool for experts with exacting demands, whose strong points are demonstrated to the full on a broad spectrum of cutting, grinding and roughing jobs everywhere in the home, workshop and garage. A wheel guard with no-tool quick-adjust facility can be adapted with just a twist of the hand to any task, while the spindle stop permits easy and speed tool change. The te-ag 115 features a sturdy flat metal gear head which provides excellent power transfer and low vibration operation, both of which help working in areas with difficult access. Thanks to its slim housing and soft grip on both the main handle and additional handle, the angle grinder offers a very high level of user-friendliness. In addition, the additional handle can be secured in three different positions for optimum adaptation to the particular workpiece, thus ensuring a reliable hold for comfortable and safe operation. The face spanner is stored in the additional handle so that it is always within reach. A cable clip for securing the wound-up cable keeps the te-ag 115 neat and safe when stored away. The machine is supplied without a cutting wheel.

EUR 47.90
1

Einhell hammer drill Set TC-ID 1000E Kit - 4259844

Einhell hammer drill Set TC-ID 1000E Kit - 4259844

The einhell impact drill tc-id 1000 e kit t is a set with an established allrounder: the impact drill. When it comes to drilling and impact drilling, the impact drill is more than a match for the resistance of virtually any material. Depending on the specific material the machine is used for, the drilling setting can be used when penetrating materials such as plastic, metal or wood. Or for hard materials such as brick, concrete or natural stone, the impact drilling setting can be used instead. The impact drill has finely adjustable speed electronics for adjusting to each particular material and application and is equipped with a robust 13 millimeter quick-change drill chuck. Large ergonomic softgrip surfaces provide a firm hold and comfortable operation, even on prolonged assignments. The additional handle is securely fastened by the ribs. The impact drill is suitable for fastening in a drill stand with a 43 mm shaft. The robust drilling depth stop is made of solid metal and is infinitely adjustable. The set has everything needed for getting started right away: one 16-piece set of drills (5 drills for wood; 6 drills for metal; 5 drills for concrete) is included. Supplied in a practical transport and storage bag.

EUR 95.90
1

Einhell double grinder TC-BG 200 L - 4412633

Einhell double grinder TC-BG 200 L - 4412633

Article descriptionthe einhell tc-bg 200 l double wheel grinder is a practical grinding/sanding machine for a wide range of applications. A double wheel grinder - two grinding/sanding wheels, each driven by a single motor - is an essential item of equipment in any workshed. A double wheel grinder can be used for sharpening scissors, knives and blades, cutting blades, drill bits and cutters, and even chisels. In addition, the double wheel grinder can also be used for derusting and deburring and for sanding/grinding and polishing a wide range of workpieces made of wood, plastic and metal. The double wheel grinder is specifically suitable for performing minor repairs and sharpening blades, but can also be used for strong repairs, adjustments to shape and new initial grinding/sanding as well. The robust compact metal construction ensures that the grinder has a long service life. Large adjustable work supports are a help for a wide range of applications. A ball bearing mounted shaft with zero play makes it possible to achieve precise results. For safety there are spark guard windows which can be adjusted without any tools, plus guard hoods which are closed at the sides. Four rubber feet absorb vibrations and ensure a secure and steady standing position in operation. The product is supplied complete with a coarse and fine grinding/sanding wheel (k36/k60).

EUR 118.90
1

Einhell double grinder TC-BG 150 - 4412632

Einhell double grinder TC-BG 150 - 4412632

The einhell tc-bg 150 double wheel grinder is a practical grinding/sanding machine for a wide range of applications. A double wheel grinder with two grinding/sanding wheels, each driven by a single motor, is an essential item of equipment in any workshed. A double wheel grinder can be used for sharpening scissors, knives and blades, cutting blades, drill bits and cutters, and even chisels. In addition, the double wheel grinder can also be used for derusting and deburring and for sanding/grinding and polishing a wide range of workpieces made of wood, plastic and metal. The double wheel grinder is specifically suitable for performing minor repairs and sharpening blades, but can also be used for strong repairs, adjustments to shape and new initial grinding/sanding as well. The robust compact metal construction ensures that the grinder has a long service life. Large adjustable work supports are a help for a wide range of applications, while the ball bearing mounted shaft with zero play makes it possible to achieve precise results. For safety there are spark guard windows which can be adjusted without any tools, plus guard hoods which are closed at the sides. Four rubber feet absorb vibrations and ensure a secure and steady standing position in operation. The product is supplied complete with a coarse and fine grinding/sanding wheel (k36/k60).

EUR 59.90
1

Einhell Angle TE-AG 125/750 Kit red

Einhell Angle TE-AG 125/750 Kit red

The te-ag 125/750 kit is an angle grinder set which provides experts with a high-quality, powerful tool in a package complete with useful accessories for immediate operation. This set demonstrates its qualities to the full on demanding cutting, grinding and roughing jobs everywhere in the home, workshop and garage. The wheel guard of the universal angle grinder has a quick-adjust facility which can be adapted with just a twist of the hand to any task. A spindle lock ensures quick and easy tool change. The angle grinder in the te-ag 125/750 kit features a sturdy flat metal gear head with excellent power transfer and low vibration operation, both of which help you to work in areas with difficult access. Thanks to its slim housing and soft grip on both the main handle and additional handle, the angle grinder offers a very high level of user-friendliness. In addition, the additional handle can be secured in three different positions for optimum adaptation to the particular workpiece, thus ensuring a reliable hold for comfortable and safe operation. The face spanner is stored in the additional handle so that it is always within reach. A diamond segment cutting wheel for stone and concrete is included so that the machine is ready for immediate use. The package also includes an additional cutting hood guard and a sturdy transport case for keeping the whole set safe. A cable clip for securing the wound-up cable keeps the te-ag 125/750 kit neat and safe when stored away.

EUR 67.90
1

Einhell cordless impact wrench TE-CI 18/1 Li-Solo, 18Volt

Einhell cordless impact wrench TE-CI 18/1 Li-Solo, 18Volt

Product descriptionfor performing work like a professional, the einhell te-ci 18/1 li-solo cordless impact driver is the tool for the ambitious hobby diy enthusiast. With 140 nm the cordless impact driver not only effortlessly drives in large or long screws, it tackles filigree screwdriving jobs too: the cordless impact driver is suitable for a whole range of jobs in the home, the workshed and especially the garage. Unlike impact drill drivers, the impact driver from einhell helps reduce physical strain on the user: the low reverse torque ensures that less effort is required compared to working with an impact drill driver. Also, the einhell te-ci 18/1 li-solo cordless impact driver is a member of the power x-change family and can therefore be used with flexibility in any situation without any bothersome cables. The same battery for everything, a concept which means lots of other tools can also be operated with the same battery. Thanks to its short, light-weight design and ergonomic softgrip surfaces, tireless working is assured. The einhell te-ci 18/1 li-solo cordless impact driver is equipped with 6.35 mm (¼") hexagon fitting for optimum operation with impact-resistant bits. The idling speed is 2300 rpm. The electronic speed control is finely adjustable for delicate operation. With the three power leds, einhell has designed a tool which provides good allround illumination. An aluminium housing and rubber supports protect the housing and help make it a rugged machine. A practical belt clip is provided for efficient and safe operation. The rechargeable battery and charger for the power x-change range of products are available separately.

EUR 86.90
1