162 resultater (0,24839 sekunder)

Vis alle filtre

Mærke

Farve

Vis alle

Butik

Pris (EUR)

Vis alle

Nulstil filter

Produkter
Fra
Butikker

Shower Shelf Base - Matte Black

Shower Shelf Base - Matte Black

Base is a series of bathroom accessories that are completely made of stainless steel and has a self-adhesive tape on the back which makes the assembly simple and it is mounted without drilling. Base Shelf is available in three different designs; Chrome, brushed stainless steel and matte black.Installation Instructions:Thoroughly clean the surface with a 3M surface cleaning sachet, click here to find the product.Remove the protective film.Aapply the product by pressing it against the substrate for 10 seconds.For optimal adhesion allow the adhesive to cure 24 hours before the product is loaded.Cleaning: When cleaning the product, use a clean, damp cloth.NOTE! Attached to durable smooth surfaces such as tiles, lacquered or veneered board materials, etc. It is not appropriate to attach the products to uneven/rough surfaces where the tape does not get full contact or surfaces that can screw up such as bathroom wallpaper. We do not recommend mounting the product over the grout as this affects the adhesion of the 3M tape. On newly tiled walls, it is important that the surface is thoroughly cleaned so that no grout adhesive remains on the mounting surface.

GBP 69.90
1

Shower Shelf Base - Brushed Stainless Steel

Shower Shelf Base - Brushed Stainless Steel

Base is a series of bathroom accessories that are completely made of stainless steel and has a self-adhesive tape on the back which makes the assembly simple and it is mounted without drilling. Base Shelf is available in three different designs; Chrome, brushed stainless steel and matte black.Installation Instructions:Thoroughly clean the surface with a 3M surface cleaning sachet, click here to find the product.Remove the protective film.Aapply the product by pressing it against the substrate for 10 seconds.For optimal adhesion allow the adhesive to cure 24 hours before the product is loaded.Cleaning: When cleaning the product, use a clean, damp cloth.NOTE! Attached to durable smooth surfaces such as tiles, lacquered or veneered board materials, etc. It is not appropriate to attach the products to uneven/rough surfaces where the tape does not get full contact or surfaces that can screw up such as bathroom wallpaper. We do not recommend mounting the product over the grout as this affects the adhesion of the 3M tape. On newly tiled walls, it is important that the surface is thoroughly cleaned so that no grout adhesive remains on the mounting surface.

GBP 69.90
1

Towel Hook Base 220 1-Hook - Chrome

Towel Hook Base 220 1-Hook - Chrome

Base 220 1-hook is part of the Base series from Beslag Design, the series contains bathroom accessories made entirely of stainless steel and all products have a self-adhesive tape on the back that facilitates installation, without you having to drill.The 3M tape on the back of the product creates endless possibilities for a quick change in your bathroom, we have interior details that are both stylish and practical. Base 220 1-hook is the hook for the towel or bathrobe. The rounded edges of the backplate create a soft and harmonious feeling, while its straight, vertical placement and round shape create an attitude and a stylish design. The vertical part at the far end of the hook creates a nice finish but is also practical because it helps to keep the towel in place without falling down.Installation Instructions:Thoroughly clean the surface with a 3M surface cleaning sachet, click here to find the product.Remove the protective film.Apply the product by pressing it against the substrate for 10 seconds.For optimal adhesion allow the adhesive to cure 24 hours before the product is loaded.Cleaning: Use a clean, damp cloth when cleaning the product.NOTE! Attached to durable smooth surfaces such as tiles, lacquered or veneered board materials, etc. It is not appropriate to attach the products to uneven/rough surfaces where the tape does not get full contact or surfaces that can screw up such as bathroom wallpaper. We do not recommend mounting the product over the grout as this affects the adhesion of the 3M tape. On newly tiled walls, it is important that the surface is thoroughly cleaned so that no grout adhesive remains on the mounting surface.

GBP 7.90
1

LED-Strip Flexy LED SHE6 - 3000mm - 24V/30W D-M - No Tape

LED-Strip Flexy LED SHE6 - 3000mm - 24V/30W D-M - No Tape

FLEXY LED SHE6 D-M is an LED strip that is 6mm wide and has 180 diodes per meter. The lighting can be dimmed and also the regulation of the color temperature is possible, from warm to cold light, to create a different atmosphere depending on the occasion. To enable this, there are two options, either via a remote control or via an application in the phone that also enables voice control with, for example, Alexa or Google Home.To be able to control the lighting via remote control, you need, remote control easi together with drive easi.Should you want to control the lighting with your phone via an application or via for example Google Home or Alexa - supplement the lighting with our driver X-driver D-M together with a control module that is purchased separately.The LED strip is compatible with the following profiles: apex, miss, and lab.Choose between three different lengths and three different voltage levels. 1000mm - voltage 10, 2000mm - voltage 20 and 3000mm - voltage 30.Fits perfectly in the wardrobe for extra lighting, in the kitchen, or in the display cabinet, it is only your own imagination that sets the limits.

GBP 151.00
1

LED-Strip Flexy LED SHE6 - 1000mm - 24V/10W D-M - No Tape

LED-Strip Flexy LED SHE6 - 1000mm - 24V/10W D-M - No Tape

FLEXY LED SHE6 D-M is an LED strip that is 6mm wide and has 180 diodes per meter. The lighting can be dimmed and also the regulation of the color temperature is possible, from warm to cold light, to create a different atmosphere depending on the occasion. To enable this, there are two options, either via a remote control or via an application in the phone that also enables voice control with, for example, Alexa or Google Home.To be able to control the lighting via remote control, you need, remote control easi together with drive easi.Should you want to control the lighting with your phone via an application or via for example Google Home or Alexa - supplement the lighting with our driver X-driver D-M together with a control module that is purchased separately.The LED strip is compatible with the following profiles: apex, miss, and lab.Choose between three different lengths and three different voltage levels. 1000mm - voltage 10, 2000mm - voltage 20 and 3000mm - voltage 30.Fits perfectly in the wardrobe for extra lighting, in the kitchen, or in the display cabinet, it is only your own imagination that sets the limits.

GBP 64.00
1

LED-Strip Flexy LED SHE6 - 2000mm - 24V/20W D-M - No Tape

LED-Strip Flexy LED SHE6 - 2000mm - 24V/20W D-M - No Tape

FLEXY LED SHE6 D-M is an LED strip that is 6mm wide and has 180 diodes per meter. The lighting can be dimmed and also the regulation of the color temperature is possible, from warm to cold light, to create a different atmosphere depending on the occasion. To enable this, there are two options, either via a remote control or via an application in the phone that also enables voice control with, for example, Alexa or Google Home.To be able to control the lighting via remote control, you need, remote control easi together with drive easi.Should you want to control the lighting with your phone via an application or via for example Google Home or Alexa - supplement the lighting with our driver X-driver D-M together with a control module that is purchased separately.The LED strip is compatible with the following profiles: apex, miss, and lab.Choose between three different lengths and three different voltage levels. 1000mm - voltage 10, 2000mm - voltage 20 and 3000mm - voltage 30.Fits perfectly in the wardrobe for extra lighting, in the kitchen, or in the display cabinet, it is only your own imagination that sets the limits.

GBP 128.00
1

Towel Hook Base 220 1-Hook - Polished Brass

Towel Hook Base 220 1-Hook - Polished Brass

Base 220 1-hook is part of the Base series from Beslag Design, the series contains bathroom accessories made entirely of stainless steel and all products have a self-adhesive tape on the back which facilitates installation, without you having to drill. Base 220 1-hook is available in four versions; matt black, brushed stainless steel, chrome and polished brass.The 3M tape on the back of the product creates endless possibilities for quick change in your bathroom, we have interior details that are both stylish and practical. Base 220 1-hook is the hook for the towel or bathrobe. The rounded edges of the back plate create a soft and harmonious feeling, while its straight, vertical placement and round shape create attitude and a stylish design. The vertical part at the far end of the hook creates a nice finish but is also practical because it helps to keep the towel in place without falling down.Installation Instructions:Thoroughly clean the surface with a 3M surface cleaning sachet, click here to find the product.Remove the protective film.Aapply the product by pressing it against the substrate for 10 seconds.For optimal adhesion allow the adhesive to cure 24 hours before the product is loaded.Cleaning: When cleaning the product, use a clean, damp cloth.NOTE! Attached to durable smooth surfaces such as tiles, lacquered or veneered board materials, etc. It is not appropriate to attach the products to uneven/rough surfaces where the tape does not get full contact or surfaces that can screw up such as bathroom wallpaper. We do not recommend mounting the product over the grout as this affects the adhesion of the 3M tape. On newly tiled walls, it is important that the surface is thoroughly cleaned so that no grout adhesive remains on the mounting surface.

GBP 8.90
1

Towel Hook Base 220 1-Hook - Brushed Stainless Steel Finish

Towel Hook Base 220 1-Hook - Brushed Stainless Steel Finish

Base 220 1-hook is part of the Base series from Beslag Design, the series contains bathroom accessories made entirely of stainless steel and all products have a self-adhesive tape on the back which facilitates installation, without you having to drill. Base 220 1-hook is available in four versions; matt black, brushed stainless steel, chrome and brushed brass.The 3M tape on the back of the product creates endless possibilities for quick change in your bathroom, we have interior details that are both stylish and practical. Base 220 1-hook is the hook for the towel or bathrobe. The rounded edges of the back plate create a soft and harmonious feeling, while its straight, vertical placement and round shape create attitude and a stylish design. The vertical part at the far end of the hook creates a nice finish but is also practical because it helps to keep the towel in place without falling down.Installation Instructions:Thoroughly clean the surface with a 3M surface cleaning sachet, click here to find the product.Remove the protective film.Apply the product by pressing it against the substrate for 10 seconds.For optimal adhesion allow the adhesive to cure 24 hours before the product is loaded.Cleaning: Use a clean, damp cloth when cleaning the product.NOTE! Attached to durable smooth surfaces such as tiles, lacquered or veneered board materials, etc. It is not appropriate to attach the products to uneven/rough surfaces where the tape does not get full contact or surfaces that can screw up such as bathroom wallpaper. We do not recommend mounting the product over the grout as this affects the adhesion of the 3M tape. On newly tiled walls, it is important that the surface is thoroughly cleaned so that no grout adhesive remains on the mounting surface.

GBP 7.90
1

Towel Hook Base 210 1-Hook - Matte Black

Towel Hook Base 210 1-Hook - Matte Black

Base 210 1-hook is part of the Base series from Beslag Design, the series contains bathroom accessories made entirely of stainless steel and all products have a self-adhesive tape on the back, which facilitates installation, without you having to drill. Base 210 hooks are available in three sizes; 1-hook, 2-hook and 3-hook and four designs; matt black, brushed stainless steel, brass and chrome.The 3M tape on the back of the product creates endless possibilities for quick change in your bathroom, we have interior details that are both stylish and practical. The hook for the towel or bathrobe. The rounded edges of the back plate create a soft feeling and the circular details at the far end of the hook create a stylish design, but are also practical as, for example, the towel does not fall down as easily when suspended.Installation Instructions:Thoroughly clean the surface with a 3M surface cleaning sachet, click here to find the product.Remove the protective film.Aapply the product by pressing it against the substrate for 10 seconds.For optimal adhesion allow the adhesive to cure 24 hours before the product is loaded.Cleaning: Use a clean, damp cloth when cleaning the product.NOTE! Attached to durable smooth surfaces such as tiles, lacquered or veneered board materials, etc. It is not appropriate to attach the products to uneven/rough surfaces where the tape does not get full contact or surfaces that can screw up such as bathroom wallpaper. We do not recommend mounting the product over the grout as this affects the adhesion of the 3M tape. On newly tiled walls, it is important that the surface is thoroughly cleaned so that no grout adhesive remains on the mounting surface.

GBP 8.90
1

Towel Hook Base 220 1-Hook - Matte Black

Towel Hook Base 220 1-Hook - Matte Black

Base 220 1-hook is part of the Base series from Beslag Design, the series contains bathroom accessories made entirely of stainless steel and all products have a self-adhesive tape on the back that facilitates installation, without you having to drill. Base 220 1-hook is available in four versions; matt black, brushed stainless steel, chrome, and brass.The 3M tape on the back of the product creates endless possibilities for a quick change in your bathroom, we have interior details that are both stylish and practical. Base 220 1-hook is the hook for the towel or bathrobe. The rounded edges of the backplate create a soft and harmonious feeling, while its straight, vertical placement and round shape create an attitude and a stylish design. The vertical part at the far end of the hook creates a nice finish but is also practical because it helps to keep the towel in place without falling down.Installation Instructions:Thoroughly clean the surface with a 3M surface cleaning sachet, click here to find the product.Remove the protective film.Apply the product by pressing it against the substrate for 10 seconds.For optimal adhesion allow the adhesive to cure 24 hours before the product is loaded.Cleaning: Use a clean, damp cloth when cleaning the product.NOTE! Attached to durable smooth surfaces such as tiles, lacquered or veneered board materials, etc. It is not appropriate to attach the products to uneven/rough surfaces where the tape does not get full contact or surfaces that can screw up such as bathroom wallpaper. We do not recommend mounting the product over the grout as this affects the adhesion of the 3M tape. On newly tiled walls, it is important that the surface is thoroughly cleaned so that no grout adhesive remains on the mounting surface.

GBP 7.90
1

Towel Hook Base 210 1-Hook - Polished Brass

Towel Hook Base 210 1-Hook - Polished Brass

Base 210 1-hook is part of the Base series from Beslag Design, the series contains bathroom accessories made entirely of stainless steel and all products have a self-adhesive tape on the back, which facilitates installation, without you having to drill. Base 210 hooks are available in three sizes; 1-hook, 2-hook and 3-hook and four designs; matt black, brushed stainless steel, polished brass and chrome.The 3M tape on the back of the product creates endless possibilities for quick change in your bathroom, we have interior details that are both stylish and practical. The hook for the towel or bathrobe. The rounded edges of the back plate create a soft feeling and the circular details at the far end of the hook create a stylish design, but are also practical as, for example, the towel does not fall down as easily when suspended.Installation Instructions:Thoroughly clean the surface with a 3M surface cleaning sachet, click here to find the product.Remove the protective film.Aapply the product by pressing it against the substrate for 10 seconds.For optimal adhesion allow the adhesive to cure 24 hours before the product is loaded.Cleaning: Use a clean, damp cloth when cleaning the product.NOTE! Attached to durable smooth surfaces such as tiles, lacquered or veneered board materials, etc. It is not appropriate to attach the products to uneven/rough surfaces where the tape does not get full contact or surfaces that can screw up such as bathroom wallpaper. We do not recommend mounting the product over the grout as this affects the adhesion of the 3M tape. On newly tiled walls, it is important that the surface is thoroughly cleaned so that no grout adhesive remains on the mounting surface.

GBP 9.90
1