7 resultater (0,26147 sekunder)

Vis alle filtre

Mærke

Farve

Butik

Pris (EUR)

Nulstil filter

Produkter
Fra
Butikker

Focal Bathys MG - Over-ear høretelefoner - Fri fragt

Focal Bathys MG - Over-ear høretelefoner - Fri fragt

Focal Bathys MG – Trådløs lyd i ægte high-end-kvalitet Med Bathys MG flytter Focal endnu en gang grænserne for, hvad trådløse hovedtelefoner kan præstere. Udstyret med eksklusive magnesium-drivere, aktiv støjreduktion i referenceklasse og avanceret USB-DAC-tilstand, leverer Bathys MG en lytteoplevelse i særklasse – lige meget hvor du befinder dig. Bathys MG er et mobilt lydstudie, designet til at levere kompromisløs lydkvalitet i et æstetisk design, der emmer af fransk finesse. Highlights Eksklusive Focal Magnesium-drivere – detaljeret og dynamisk high-fidelity-lyd Tre ANC-modes: Silent, Soft og Transparent for perfekt kontrol af omgivelserne Op til 42 timers batteritid (DAC-mode), 30 timer via Bluetooth USB-DAC-mode med opløsning op til 24-bit / 192kHz Bluetooth® 5.2 med aptX™ Adaptive og multipoint-forbindelse Luksusmaterialer: magnesium, aluminium, ægte læder og memory foam Kompatibel med Focal & Naim-appen for EQ og lydtilpasning Lydkvalitet i særklasse Bathys MG er drevet af magnesium-dome drivere, udviklet og håndsamlet i Frankrig. Resultatet? En raffineret lydsignatur med kontrolleret bas, silkeblød mellemtone og sprød diskant – præcis, som Focal er kendt for. De integrerede mikrofoner og den intelligente ANC-algoritme sikrer både suveræn støjreduktion og klar tale ved opkald. Komfort og byggekvalitet uden kompromis Med et design inspireret af Focal Clear MG og et kabinet i aluminium og magnesium, kombinerer Bathys MG lethed med holdbarhed. Ørepuderne i memory foam og det ægte læder på hovedbøjlen garanterer komfort selv under de længste lytninger. Det oplyste Focal-logo på ørekopperne understreger det elegante, gennemførte udtryk. Tilpasset til dig Via Focal & Naim-appen kan du skræddersy lyden til dine præferencer – uanset om du streamer musik, ser film eller arbejder. Tre ANC-tilstande giver dig fuld kontrol over omgivelserne, og multipoint-funktionalitet betyder, at du kan være tilsluttet både computer og mobil på samme tid.

DKK 9600.00
1

Grado RS2x - On-ear høretelefoner - Fri fragt

Grado RS2x - On-ear høretelefoner - Fri fragt

Immerse yourself in the world of premium sound with Grado’s RS2x headphones, designed exclusively for audiophiles prioritizing unrivaled audio quality. These wired wonders are ideal for the refined home listening experience. Revel in their exquisite sound profile, boasting a wide stereo field, precise bass depth, and articulate highs, all packaged in an attractive design with wood accents and a leather-stitched headband.The RS2x’s lightweight, on-ear design ensures comfort, featuring foam cushions and adjustable fit. The headphones house Grado’s fourth-generation X series dynamic drivers, delivering a frequency range of 14Hz to 28kHz with a distinctive hemp wood and maple exterior. Its super-annealed, eight-conductor copper wire cable guarantees durability. Upgrade to an XLR termination cable for $170 or explore optional cases starting at $49.95 (Save $5 when purchased together).Experience exceptional spatial detail with the RS2x, tested across various devices, delivering accurate bass and clear highs even at moderate volumes, these headphones excel in reproducing intricate details and spatial depth. The unparalleled sound quality makes it a compelling choice for serious audiophiles.

DKK 5495.00
1

JBL L52 Black Edition Classic - Kompakthøjtaler - Black Days

JBL L52 Black Edition Classic - Kompakthøjtaler - Black Days

JBL L52 Black Edition Classic - Velspillende kompakthøjtaler i en ny elegant finish L52 Classic kommer nu i en smuk sort piano lak, som passer ind i ethvert hjem. Den sorte piano lak er behandlet i flere lag, hvilket sikrer en eksklusiv finish, der er en fryd for øjet. En anden forskel er, at højglansen giver højtaleren en mere "blød kant", samtidig med at de guld farvede labels på fronten og bagpanelet skaber et luksuriøst look. Specifikationsmæssigt er L52 Black Edition den samme som den originale Classic, ig derfor kan du forvente en lyd, der er langt større, end dens fysiske aftryk giver indtryk af. Her er man er nødt til at høre dem, for at man kan tro det. Hvor du så har lyst til at høre dem fra er helt op til dig, for dens størrelse gør dem ideelle til standere, bogreoler, bordplader eller vægmontering. Ligegyldigt hvor du vælger at placere dem, så kan vi garantere, at de både vil være en fryd for øjet og ørene. Designet er nemlig en nedskaleret version af den prisvindende L82 Classic, og takket være frontpanelets HF-dæmpere, så kan lyden skræddersyes til ligepræcis dit rum. Highlights Stor, dynamisk og kraftfuld lyd Kabinet i valnød finer Højfrekvent niveaudæmper Mulighed for vægmontering 100% bæredygtigt pakket En lyd der skal opleves L52 Classic har et 2-vejs design, der bruger en 0,75" titanium dome diskant, som er monteret i en waveguide for en bedre spredning og velopløst top. Selve basenheden er en 5,25" med en støbt ramme, der får optimale arbejdsbetingelser gennem indstillingen af den frontvendte basrefelsk og et premium delefilter design. Alt dette sikre en førsteklasses ydelse, der overgår alle de forventninger, man kan have til en højttaler i denne størrelse. Bassen er kraftfuld, lyden er dynamisk, og lydbileldet er usædvanlig stort, hvilket gør det muligt for højttalerne at forsvinde i rummet. For dem der ikke har plads til de større Classic-modeller, så er L52 Classic er oplagt valg med sin store lyd, lille størrelse og attraktive prissætning. Generelt om Black Edition Classic For a limited time, JBL’s iconic Classic Series passive hi-fi and powered streaming loudspeakers will be available in a special Black Edition version that showcases these highly popular models in a stylish and sophisticated new look. Available on four models – the passive hi-fi L100, L82, and L52, and the powered streaming L75ms music system – these special production versions all include the Black Edition Appearance Package that consists of a high-gloss black painted cabinet finish, unique gold labels on the front and rear of the passive models, and a black Quadrex foam grille with a unique gold JBL logo accent. In addition, the L100 and L82 will include the Black Edition Performance Package that includes acoustic refinements to all drivers, and an upgraded crossover network with a premium bi-wire input terminal cup. While the popularity and acoustic performance of the Classic Series loudspeakers cannot be denied, their decidedly retro walnut wood veneer and brightly colored grilles may not fit with every décor and interior. The Black Edition Appearance Package transforms their look in a most elegant way. Each enclosure is treated to a multi-step, labor-intensive painting process that starts with a black base coat and ends with a luxurious high-gloss finish, resulting in a mirror-like exterior that reflects its environment to the eye. The high-gloss process also provides a subtle radius to the edges of the cabinet giving it a softer look overall. To complement the black cabinets, special gold labels are used on the passive hi-fi models (L100, L82, and L52) on the front of the loudspeaker around the attenuator level controls and on the rear labels above the input terminal cup. Black Quadrex foam grilles are accented with unique gold JBL badges to visually identify these models as special edition products. The Black Edition Appearance Package elevates these models to a modern feel that is at home in virtually any décor. The Black Edition models will only be available for a limited time before they are gone forever. They offer a unique combination of award-winning design, legendary JBL sound, and limited-edition appeal in a beautiful product that stands above the rest.

DKK 5995.00
1

JBL L52 Classic Sort front - valnød - returvare - Kompakthøjtaler - Fri fragt

JBL L52 Classic Sort front - valnød - returvare - Kompakthøjtaler - Fri fragt

JBL L52 Classic - Stor lyd fra den mindste i serien L52 Classic er den mindste i JBL's Classic serien, men dens lyd er alt andet end det. Faktisk leverer disse komptakte højttalere så stor en lyd for sin størrelse, at man er nødt til at høre dem, før man kan tro på det. Hvor du så har lyst til at høre dem fra er helt op til dig, for dens størrelse gør dem ideelle til standere, bogreoler, bordplader eller vægmontering. Ligegyldigt hvor du vælger at placere dem, så kan vi garantere, at de både vil være en fryd for øjet og ørene. Designet er nemlig en nedskaleret version af den prisvindende L82 Classic, og takket være fronpanelets HF-dæmpere, så kan lydden skræddersyes til ligepræcis dit rum. Highlights Stor, dynamisk og kraftfuld lyd Kabinet i valnød finer Højfrekvent niveaudæmper Mulighed for vægmontering 100% bæredygtigt pakket En lyd der skal høres L52 Classic har et 2-vejs design, der bruger en 0,75" titanium dome diskant, som er monteret i en waveguide for en bedre spredning og velopløst top. Selve basenheden er en 5,25" med en støbt ramme, der får optimale arbejdsbetingelser gennem indstillingen af den frontvendte basrefelsk og et premium delefilter design. Alt dette sikre en førsteklasses ydelse, der overgår alle de forventninger, man kan have til en højttaler i denne størrelse. Bassen er kraftfuld, lyden er dynamisk, og lydbileldet er usædvanlig stort, hvilket gør det muligt for højttalerne at forsvinde i rummet. For dem der ikke har plads til de større Classic-modeller, så er L52 Classic er oplagt valg med sin store lyd, lille størrelse og attraktive prissætning. Specifikationer Type 2-way bookshelf loudspeaker Low Frequency Driver 5.25" (133mm) Pure Pulp cone woofer High Frequency Driver 0.75” (20mm) Titanium dome tweeter with waveguide Recommended Amplifier Power 10 - 75 WRMS Impedance 4 Ohm Loudspeaker Sensitivity 85 dB/2.83Vm Frequency Response 47 Hz - 24 kHz (-6 dB) Crossover Frequency 2.8 kHz Enclosure Front-ported bookshelf in satin walnut furniture-grade wood veneer Grille Foam Quadrex grille available in three colors Dimensions (H x W xD) 33.02 x 19.66 x 21.62 cm Controls HF level control Input Type Gold-plated binding posts Product Weight 5.0 kg pc Warranty: 5 Years Recommended stand height 60.9 cm Wall bracket insert/spacing M6 x 1.0 thread, 12mm max screw length / spaced 2.64” (67mm) center-to-center

DKK 5395.00
1

Dynaudio Emit 30 - Gulvhøjtaler - Sort - Fri fragt

Dynaudio Emit 30 - Gulvhøjtaler - Sort - Fri fragt

Dynaudio Emit 30 - Perfekt til større stereoanlæg eller hjemmebiografen Hvis du leder efter lidt mere power fra dit system, så har du fundet det. Emit 30 er en kompakt 2,5-vejs højttaler, der er designet til at imponere uanset om den bruges som et selvstændigt stereopar eller som en del af en 5.1-kanals (eller flere) hjemmebiograf. Ligesom sin lillebror, Emit 10, bruger den de 14 cm MSP basenheder, der findes i Evoke-serien. Til forskel fra Emit 10 er basenhederne fordoblet i hver højttaler, så du får en bedre basgengivelse, en klarere mellemtone og mere punch. MSP står for Magnesium Silicate Polymer, der er et materiale, som Dynaudio har udviklet til deres basenheder og brugt i årtier - selv på deres mest roste high-end modeller. MSP giver præcis den rigtige kombination af lethed, stivhed og dæmpning (en de har tunet og finpudset gennem årene) for at levere kontrol og direkte kraft. Lige der hvor det er nødvendigt. “Not only is it a good speaker, the Dynaudio Emit 30 throws down a gauntlet to other brands; if Dynaudio can do something like the Emit 30, why the **** can’t you? - Alan Sircom, Hi-Fi+ Emit 30 key features Designed and engineered in DenmarkThe entire Emit family has been put through its paces in our world-class Jupiter measuring facility at Dynaudio Labs. We treat it exactly the same as we do every other speaker in our range: no stone left unturned. Cerotar tweeterEmit uses the highly regarded Cerotar tweeter from our Evoke series. It’s a high-quality high-frequency driver inspired by our top-end Confidence and Heritage Special speakers, and includes the innovative resonance-defeating Hexis inner dome. Clean and simpleEach speaker in the Emit range is designed to fit with modern lifestyles and interiors. Clean lines, simple finishes and minimalist Scandinavian looks – whether you’re listening in stereo or have a full multi-channel system. Premium woofer technology The cones are moulded in one piece; we don’t use a separate glued dust-cap. The little balance ribs around the edge of the centre are bonded directly to the voice-coil behind it, making the whole motor assembly one solid piece. Using fewer moving parts gives our engineers fine control over how the speaker moves – which, in turn, means fine control over how it performs. You’ll hear it as strong, tight bass and startlingly clear vocals, guitars and more. Even at eyebrow-raising volume. Each woofer is powered by a dual-stacked strontium carbonite Ferrite+ ceramic magnet system. Using two magnets means we can more effectively direct where the magnetic energy goes – it’s a lesson we learned developing the award-winning Special Forty anniversary series, and it’s thrilling to be able to use it in our entry-level family. The target for all that flux is the voice-coil. We use aluminium windings in Emit 30. Aluminium is light (which minimises inertia on the cone’s back-and-forth movement), and because it’s lighter than copper wire, it means we can pack more windings on to the two-layer glass-fibre former. More windings equals more power, and greater control over fine movement. There’s a twist, though (please pardon the pun): we’ve coated the aluminium wire in a very thin copper coating to further increase the control the amplifier has on the voice-coil. More force with only a fractional weight gain: win-win. High-performance Cerotar tweeter While the twin 14cm mid/bass units deal with the midrange and bass, the upper frequencies are handled by the tweeter. Emit might be an ‘entry-level’ speaker, but we certainly haven’t used any old unit off the shelf; witness the incredible Cerotar tweeter (the same as we use in Evoke). It’s based on the Esotar Forty anniversary tweeter and the Esotar Pro found in our Core studio reference speakers, and must be heard to be believed. The 28mm coated soft-dome diaphragm is backed up by the clever Hexis inner dome. The playing surface has been specifically engineered to produce ultra-clear, ultra-detailed high-frequencies without breakup (even at high volumes), while the Hexis smooths the airflow behind it to reduces unwanted resonances. An aluminium voice-coil and airflow magnet system provide the power. Cerotar is designed for high performance without listener fatigue – perfect if you’re given to long listening sessions (and you’re music lovers, so we bet you are). The bass-port on the back panel has dual flares (one inside; one outside), and has been tuned to minimise unwanted ‘chuffing’. It’s supplied with foam inserts that can be used to optimise performance for the speaker’s position relative to the wall. Danish-designed cabinetry Emit 30’s cabinets are made from 18mm MDF to provide a solid, stable platform for the drivers to do their work. They’re internally damped with polyester fibre, measured down to the gram for exactly the right amount of resonance suppression. On the outside, you can choose from three custom laminate finishes: Black, White or Walnut. They’ve been chosen to complement any room, in any

DKK 8620.00
1

Dynaudio Emit 30 - Gulvhøjtaler - Brun Valnød - Fri fragt

Dynaudio Emit 30 - Gulvhøjtaler - Brun Valnød - Fri fragt

Dynaudio Emit 30 - Perfekt til større stereoanlæg eller hjemmebiografen Hvis du leder efter lidt mere power fra dit system, så har du fundet det. Emit 30 er en kompakt 2,5-vejs højttaler, der er designet til at imponere uanset om den bruges som et selvstændigt stereopar eller som en del af en 5.1-kanals (eller flere) hjemmebiograf. Ligesom sin lillebror, Emit 10, bruger den de 14 cm MSP basenheder, der findes i Evoke-serien. Til forskel fra Emit 10 er basenhederne fordoblet i hver højttaler, så du får en bedre basgengivelse, en klarere mellemtone og mere punch. MSP står for Magnesium Silicate Polymer, der er et materiale, som Dynaudio har udviklet til deres basenheder og brugt i årtier - selv på deres mest roste high-end modeller. MSP giver præcis den rigtige kombination af lethed, stivhed og dæmpning (en de har tunet og finpudset gennem årene) for at levere kontrol og direkte kraft. Lige der hvor det er nødvendigt. “Not only is it a good speaker, the Dynaudio Emit 30 throws down a gauntlet to other brands; if Dynaudio can do something like the Emit 30, why the **** can’t you? - Alan Sircom, Hi-Fi+ Emit 30 key features Designed and engineered in DenmarkThe entire Emit family has been put through its paces in our world-class Jupiter measuring facility at Dynaudio Labs. We treat it exactly the same as we do every other speaker in our range: no stone left unturned. Cerotar tweeterEmit uses the highly regarded Cerotar tweeter from our Evoke series. It’s a high-quality high-frequency driver inspired by our top-end Confidence and Heritage Special speakers, and includes the innovative resonance-defeating Hexis inner dome. Clean and simpleEach speaker in the Emit range is designed to fit with modern lifestyles and interiors. Clean lines, simple finishes and minimalist Scandinavian looks – whether you’re listening in stereo or have a full multi-channel system. Premium woofer technology The cones are moulded in one piece; we don’t use a separate glued dust-cap. The little balance ribs around the edge of the centre are bonded directly to the voice-coil behind it, making the whole motor assembly one solid piece. Using fewer moving parts gives our engineers fine control over how the speaker moves – which, in turn, means fine control over how it performs. You’ll hear it as strong, tight bass and startlingly clear vocals, guitars and more. Even at eyebrow-raising volume. Each woofer is powered by a dual-stacked strontium carbonite Ferrite+ ceramic magnet system. Using two magnets means we can more effectively direct where the magnetic energy goes – it’s a lesson we learned developing the award-winning Special Forty anniversary series, and it’s thrilling to be able to use it in our entry-level family. The target for all that flux is the voice-coil. We use aluminium windings in Emit 30. Aluminium is light (which minimises inertia on the cone’s back-and-forth movement), and because it’s lighter than copper wire, it means we can pack more windings on to the two-layer glass-fibre former. More windings equals more power, and greater control over fine movement. There’s a twist, though (please pardon the pun): we’ve coated the aluminium wire in a very thin copper coating to further increase the control the amplifier has on the voice-coil. More force with only a fractional weight gain: win-win. High-performance Cerotar tweeter While the twin 14cm mid/bass units deal with the midrange and bass, the upper frequencies are handled by the tweeter. Emit might be an ‘entry-level’ speaker, but we certainly haven’t used any old unit off the shelf; witness the incredible Cerotar tweeter (the same as we use in Evoke). It’s based on the Esotar Forty anniversary tweeter and the Esotar Pro found in our Core studio reference speakers, and must be heard to be believed. The 28mm coated soft-dome diaphragm is backed up by the clever Hexis inner dome. The playing surface has been specifically engineered to produce ultra-clear, ultra-detailed high-frequencies without breakup (even at high volumes), while the Hexis smooths the airflow behind it to reduces unwanted resonances. An aluminium voice-coil and airflow magnet system provide the power. Cerotar is designed for high performance without listener fatigue – perfect if you’re given to long listening sessions (and you’re music lovers, so we bet you are). The bass-port on the back panel has dual flares (one inside; one outside), and has been tuned to minimise unwanted ‘chuffing’. It’s supplied with foam inserts that can be used to optimise performance for the speaker’s position relative to the wall. Danish-designed cabinetry Emit 30’s cabinets are made from 18mm MDF to provide a solid, stable platform for the drivers to do their work. They’re internally damped with polyester fibre, measured down to the gram for exactly the right amount of resonance suppression. On the outside, you can choose from three custom laminate finishes: Black, White or Walnut. They’ve been chosen to complement any room, in any

DKK 8620.00
1

Dynaudio Emit 30 - Gulvhøjtaler - Hvid - Fri fragt

Dynaudio Emit 30 - Gulvhøjtaler - Hvid - Fri fragt

Dynaudio Emit 30 - Perfekt til større stereoanlæg eller hjemmebiografen Hvis du leder efter lidt mere power fra dit system, så har du fundet det. Emit 30 er en kompakt 2,5-vejs højttaler, der er designet til at imponere uanset om den bruges som et selvstændigt stereopar eller som en del af en 5.1-kanals (eller flere) hjemmebiograf. Ligesom sin lillebror, Emit 10, bruger den de 14 cm MSP basenheder, der findes i Evoke-serien. Til forskel fra Emit 10 er basenhederne fordoblet i hver højttaler, så du får en bedre basgengivelse, en klarere mellemtone og mere punch. MSP står for Magnesium Silicate Polymer, der er et materiale, som Dynaudio har udviklet til deres basenheder og brugt i årtier - selv på deres mest roste high-end modeller. MSP giver præcis den rigtige kombination af lethed, stivhed og dæmpning (en de har tunet og finpudset gennem årene) for at levere kontrol og direkte kraft. Lige der hvor det er nødvendigt. “Not only is it a good speaker, the Dynaudio Emit 30 throws down a gauntlet to other brands; if Dynaudio can do something like the Emit 30, why the **** can’t you? - Alan Sircom, Hi-Fi+ Emit 30 key features Designed and engineered in DenmarkThe entire Emit family has been put through its paces in our world-class Jupiter measuring facility at Dynaudio Labs. We treat it exactly the same as we do every other speaker in our range: no stone left unturned. Cerotar tweeterEmit uses the highly regarded Cerotar tweeter from our Evoke series. It’s a high-quality high-frequency driver inspired by our top-end Confidence and Heritage Special speakers, and includes the innovative resonance-defeating Hexis inner dome. Clean and simpleEach speaker in the Emit range is designed to fit with modern lifestyles and interiors. Clean lines, simple finishes and minimalist Scandinavian looks – whether you’re listening in stereo or have a full multi-channel system. Premium woofer technology The cones are moulded in one piece; we don’t use a separate glued dust-cap. The little balance ribs around the edge of the centre are bonded directly to the voice-coil behind it, making the whole motor assembly one solid piece. Using fewer moving parts gives our engineers fine control over how the speaker moves – which, in turn, means fine control over how it performs. You’ll hear it as strong, tight bass and startlingly clear vocals, guitars and more. Even at eyebrow-raising volume. Each woofer is powered by a dual-stacked strontium carbonite Ferrite+ ceramic magnet system. Using two magnets means we can more effectively direct where the magnetic energy goes – it’s a lesson we learned developing the award-winning Special Forty anniversary series, and it’s thrilling to be able to use it in our entry-level family. The target for all that flux is the voice-coil. We use aluminium windings in Emit 30. Aluminium is light (which minimises inertia on the cone’s back-and-forth movement), and because it’s lighter than copper wire, it means we can pack more windings on to the two-layer glass-fibre former. More windings equals more power, and greater control over fine movement. There’s a twist, though (please pardon the pun): we’ve coated the aluminium wire in a very thin copper coating to further increase the control the amplifier has on the voice-coil. More force with only a fractional weight gain: win-win. High-performance Cerotar tweeter While the twin 14cm mid/bass units deal with the midrange and bass, the upper frequencies are handled by the tweeter. Emit might be an ‘entry-level’ speaker, but we certainly haven’t used any old unit off the shelf; witness the incredible Cerotar tweeter (the same as we use in Evoke). It’s based on the Esotar Forty anniversary tweeter and the Esotar Pro found in our Core studio reference speakers, and must be heard to be believed. The 28mm coated soft-dome diaphragm is backed up by the clever Hexis inner dome. The playing surface has been specifically engineered to produce ultra-clear, ultra-detailed high-frequencies without breakup (even at high volumes), while the Hexis smooths the airflow behind it to reduces unwanted resonances. An aluminium voice-coil and airflow magnet system provide the power. Cerotar is designed for high performance without listener fatigue – perfect if you’re given to long listening sessions (and you’re music lovers, so we bet you are). The bass-port on the back panel has dual flares (one inside; one outside), and has been tuned to minimise unwanted ‘chuffing’. It’s supplied with foam inserts that can be used to optimise performance for the speaker’s position relative to the wall. Danish-designed cabinetry Emit 30’s cabinets are made from 18mm MDF to provide a solid, stable platform for the drivers to do their work. They’re internally damped with polyester fibre, measured down to the gram for exactly the right amount of resonance suppression. On the outside, you can choose from three custom laminate finishes: Black, White or Walnut. They’ve been chosen to complement any room, in any

DKK 8620.00
1