17 resultater (0,28563 sekunder)

Vis alle filtre

Mærke

Vis alle

Butik

Pris (EUR)

Nulstil filter

Produkter
Fra
Butikker

XRAY X12'22 US Specs - 1/12 Pan Car - 370016

XRAY X12'22 US Specs - 1/12 Pan Car - 370016

XRAY X12 2022 US-Spec 1/12 Pan Car Racing Kit2022 All-New:Fully adjustable battery mounting system does not require an O-ring or tapeUltra-lightweight steel solid axle for improved drivability and throttle controlLightweight wheel adaptors for reduced rotation massWider foam bumper for better body shell support & improved crash protectionUpdated front suspension with adjustable steering lock limitersSteel arm brace for increased arm strengthLow profile lightweight bushings installed in graphite plates replace traditional nuts for a sleeker look and lower CGSolid axle now standard in the EU Edition1.0 kingpins included in the US Edition for improved drivability out of the box on high tractionFirst class Build Videos and Tech Tip Videos with QR links in the Instruction Manual

DKK 2395.00
1

O.S.Engine OS0R21M06 - O.S.SPEED R21-M06 Marine Engine

O.S.Engine OS0R21M06 - O.S.SPEED R21-M06 Marine Engine

O.S.SPEED R21-M06 - 2025 Minicars Marine SE Racing 3.5cc Engine This is the new 2025-edition Minicars Marine Special Edition O.S.SPEED R21-M06 3.5cc long-stroke competition engine. The R21-M06 has a new piston & liner, a new conrod, a new crankshaft & a ceramic main ball bearing.Features: New DLC coated & balanced R21 Euro-II crankshaft with more timing New 9-port cylinder liner with 3-port exhaust New piston with 3 oil-grooves New Ceramic main ball bearing New Reinforced "R" conrod New RP6 Turbo plug (instead of RP7) O.S.Speed developed black crankcase with Minicars Marine Laser Engraving Black anodized water cooling head with Minicars Marine Special Edition Laser Engraving Backplate with steel thrust plate for lower friction and increased durability No carb included - choose your own carburetor (15mm diameter neck) Suitable for competition boats (experience level ”high”): Hydroplanes Offshore (with gear deduction) Endurance (with gear reduction) Recommended fuel: Hydroplanes: 12% nitro fuel with 8% Klotz Original Techniplate + 8% Klotz Benol oil Offshore: 12% nitro fuel with 8% Klotz Original Techniplate + 8% Klotz Benol oil Endurance: 12% nitro fuel with 8% Klotz Original Techniplate + 8% Klotz Benol oil We don't recommend running the engine with less oil than the above recommended levels. You may add more recin/castor oil (Klotz Benol) in extreme conditions and heavy loads. 9-port sleeve with re-designed ports with improved flow for more torque and a new piston with 3 oil grooves.Newly designed reinforced "R" connecting rod is now stronger to withstand even more abuse.The rear bearing is now ceramic.New DLC coated and balanced crankshaft from the R21 Euro II engine for more power overall.Steel insert backplate for less friction and more durability.Marine cooling head with Minicars Marine laser engravingNew combustion chamber with smaller volume for lower nitro levels.Specs: Displacement: 3.49cc Bore: 16.08mm Stroke: 17.2mm Crankshaft dia: 14mm Practical r.p.m. Range: 4.000~43.000 Output: 2.76hp @ 35.000r.p.m. Weight: 265g Water Cooling Nipple Thread: M5x0.8 Included: O.S.Speed R21-M06 2025-Edition Minicars Marine Engine RP6 Glowplug O.S.Speed flywheel cone O.S.Speed decal Printed Manual & partslist

DKK 2871.19
1

FMS FMS0023PNP - Fox V2 Glider 2320mm PNP FMS

FMS FMS0023PNP - Fox V2 Glider 2320mm PNP FMS

FMS FOX V2 2320mm Electric GliderThe MDM 1 Fox is a composite unlimited aerobatic glider. At its first public unveiling it managed to place first in non other than the World Championships! Since then it has become a regular aircraft on podiums throughout the world.Seating two in relative comfort it also performs very well in cross-country even though it only has a glide ratio of 28:1. Sleek and efficient with fantastic unlimited aerobatic flight envelope are attributes that set this glider apart and make it an excellent model for Famous to replicate.FMS has created this wonderfully exciting aerobatic glider in impact absorbing and resilient EPO foam. The mold quality is sublime adding to the efficiency and great looks. Combined with a high powered brushless motor and LiPo battery, gives the budding modeler a new level of high performance excitement.This glider features glass/carbon composite and aluminum tube strengthened wings that are easily removable for transport and a very compact fuselage adding further to the enjoyment of this model.Positive and negative loops, stall turns, point rolls and inverted flight are all easily performed with this model and it will also perform excellently simply hunting for thermals or slope flying, making it suitable for a wide range of pilots.Features: Ball link connectors are used replacing the traditional clevis Flaps up 25 degree and down 60 degree for more aerobatic Huge 2300mm wingspan provides stable flights and long fly times. A perfect platform for aerial photography EPO foam construction Carbon composite wing reinforcement tube Wings easily remove for easy transportation Brushless motor, ESC and installed servos Specs: Wingspan: 2320mm Overall Length: 1290mm Flying Weight: Around 1150g Motor: Brushless 4018-KV900 ESC: 40A Brushless Servos: 6x 9g Rec Radio: 6 Channels CG: 40mm (From Leading Edge) Prop: 12x6 2-blade Recommended Battery: Li-Po 11.1V 1300 mAh 35C Aileron: Yes Elevator: Yes Rudder: Yes Flaps: Yes Retracts: No Approx. Flying Duration: 8 minutes Minimum Age Recommendation: 14+ Experience Level: Intermediate Recommended Environment: Outdoor Assembly Time: 1 hour Is Assembly Required: Yes Material: Durable EPO Requires: Radio System, Battery and Charger

DKK 2369.30
1

FMS FMS093P - F-15 V2 715mm (64mm Fan) PNP

FMS FMS093P - F-15 V2 715mm (64mm Fan) PNP

FMS 093P - 64mm EDF F-15 V2 PNPFMS is pleased to announce that all 64mm ducted fan aircrafts are being upgraded. Inspired by the superior features of the original model, version two (V2) has improved mechanical and structural features that will enhance air performance and decrease assembly time.The fiber pipe greatly enhances the wing strength for enhanced flying maneuvers. Improved main wing set and landing gear installation optimizes strength of structure and reduces assembly time.The latest 64mm ducted fan can achieve more than 800 grams of thrust. The differences in speeds between the V1 and V2 will be noticeable. If you possess the “need for speed,” accessories such as missiles can be removed to create a faster more streamlined model.Upgrades: 420mm fiber pipe inserted through the fuselage and main wing Use of four inner-hexagon screws instead of glue improves main wing set and landing gear installation optimizing strength of structure New more powerful 64mm 11-blade ducted fan with up to 800 grams of thrust New 2840-KV3150 motor New Predator 40A ESC The latest FMS EPO foam material creates stronger, more impact-resistant planes Environmentally friendly water-based paint minimizes blistering from sun Pre-installed newly designed control horns allows more throw Features: 420mm fiber pipe inserted through the fuselage and main wing Improved main wing set and landing gear installation - optimizes strength of structure and reduces assembly time 64mm 11-blade ducted fan 2840-KV3150 motor Predator 40A ESC 5x 9g servos The latest EPO foam material creating stronger, more impact-resistant plane Environmentally friendly water-based paint minimizes blistering from sun Pre-installed newly designed control horns allows more throw Specs: Wingspan: 715mm Overall Length: 980mm Flying Weight: Around 1025g Motor Size: Brushless 4S 2840-KV3150 ESC: 40A Servos: 4x 9g & 1x 9g 54° Rec Radio: Minimum 4 Channels CG (center of gravity): 85-90mm (From Leading Edge) EDF: 64mm Recommended Battery: Li-Po 14.8V 2200mAh-2600mAh Aileron: Yes Elevator: Yes Rudder: Yes Flaps: No Retracts: No Approx. Flying Duration: 5 minutes Minimum Age Recommendation: 14+ Experience Level: Intermediate Assembly Time: 20 minutes Wing Load: 66.5g/dm² Wing Area: 15.4dm² Notes to buyers: RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory. PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.

DKK 1685.64
1

Platinum 200A ESC HV 6-14S OPTO V4.1

Platinum 200A ESC HV 6-14S OPTO V4.1

Hobbywing Platinum HV 200A OPTO 6-14S ESC One of a kind DesignThe elegant cases are made by Aluminum. Each cooling slot and its fin were carefully designedand arranged, and the case has gone through oxidation, coloring and edge-highlighting.Innovative Heat Dissipation StructureThe innovative "duo" stacking structure allows all components on both sides of the printed circuit boards to quickly conduct heat to the aluminum case.Excellent Motor Speed GoverningHigh-performance 32-bit processor combined with advanced algorithm makes the motor speed-governing excellent for different conditions. With the adjustable sensitivity of speed-governing, every pilot can find the most suitable settings for his helicopter.Super Soft Start-upPlatinum-HV-200A makes the motor start extremely soft and avoids tail-drift issues of helicopter. The start-up time is adjustable within 8 to 25 seconds, this will definitely create a perfect starting point for every flight. Great Current EnduranceA high quality, and high voltage MOSFET with a great current endurance guarantees the ESC?s safety especially in a extremely high power demanding situation. Built-in Sparkproof CircuitBuilt-in sparkproof circuit effectively eliminates sparks produced at the ?powering-on? moment and prolongs the connectors? lifespan. Specifications Brushed/Brushless: BL High Voltage/Regular: High Voltage Cont./Peak Current: 200A/300A Input: 6-14S LiPo BEC Output: no Input Wires:Red-8AWG-150mm*1Black-8WG-150mm*1 Output Wires:Black-10AWG-150mm*3 Input Connectors: No Output Connecotors:No Transmitter: Not Supported LED Program Card: Not Supported LED Program Box: Not Supported LCD Program Box: Supported WiFi Module: Supported Program Port:Separate program port Firmware Upgrade: Supported Size: 105 x 50 x 36mm Weight: 325g

DKK 3679.00
1

Seagull Decathlon (90) Sport serie Seagull

Seagull Decathlon (90) Sport serie Seagull

Seagull Decathlon (91) 1.8m ARF AirplaneFeatures:Approx flying weight: 3.4-4kgFactory covered with Oracover - Fer Red 23 - White 10Length: 121cmWingspan: 180cmWing area: 54sq.dmSuits: .75 2-Stroke (.91 4-Stroke)The Seagull DecathlonDesigned to sweep away the cares and stresses of 21st century life. It's easy to fly with big, airy, spacious fuselages, super-lasered and laminated components with wonderful glass cloth cowls and spats painted with Rembrandt-like care and accuracy!It suits the intermediate level sport flyer and can be seen as the next stage on from the easy flying Seagull trainers.The Decathlons are all easy to fly and quick to assemble thanks to the usual finished, covered and decorated components. You can probably see they are all factory-built to a very high standard with precision laser-cutting and high quality Oracover film as standard. As usual, the pushrods, the motor mounts, hinges, etc are factory-fitted for the fastest assembly time.Of course, included too are comprehensive fittings kits, pre-painted L/W glass cloth cowls, aluminium wing struts, undercarriage, tail wheel assembly and fully illustrated instruction manual.Needed:.75 2-stroke or .91 4-stroke engine4 channel radio with 6 servosGlow plug to suit enginePropeller to suit engineProtective foam rubber for radio systemSilicone fuel lineThick cyanoacrylate glue30 minute epoxy5 minute epoxyHand or electric drillAssorted drill bitsModelling knifeStraight edge ruler2mm ball driverPhillips head screwdriver220 grit sandpaper90 square or builders triangleWire cuttersMasking tape & T-pinsThread-lockPaper towels

DKK 2899.00
1

HUDY Tweak Station On-road 1/10-1/8 - 107903

HUDY Tweak Station On-road 1/10-1/8 - 107903

HUDY 107903 - Quick-Tweak Station 1/8 & 1/10 On-RoadThe HUDY Quick Tweak Station comes in an exclusive aluminum carrying case with precut foam inserts to allow easy & safe storage.Universal tweak station fits all 1/10 and 1/8 on-road cars; the fixed base plate can be moved along the center axle to shorten the Quick-Tweak Station as required.Super-lightweight and responsive precision instrument, exceptionally sensitive to detect even small amounts of tweak.Ball-bearing supported, featuring manually-selected ball-bearings which are precisely pressed into the base plates to ensure freely-rotating, bind-free movement.Ball-bearings are degreased and lightly oiled with AeroShell 12T fluid for ultra-free and smooth operation, to easily detect any small amounts of tweak.Base plates are CNC machined from strong yet lightweight aluminum; specially milled cavities in the bottom of each base plate give ultra-lightness; both left & right sides are identically weighted for perfect balance.Base plates are black-coated for protection and stylish look, additionally laser engraved with precise & accurate track-width scale between 180-310mm.Three adjustable threaded feet allow easy level adjustment.Pivoting base plate features a precise spirit level; material is milled out from around the spirit level to allow you to easily view the bubble from any position even with a car being positioned on the tweak station.Exclusive aluminum carrying case with precut foam inserts for safe transport and storage.Having the proper tweak is one of the most important factors that influences a cars overall performance; a badly-tweaked car has a very negative impact on a car's handling. Checking and correcting tweak is very important; pro racers check for tweak a number of times after each run.The HUDY Quick-Tweak Station allows you to quickly and easily check and correct tweak on your race car to help ensure proper, consistent handling.The HUDY Quick Tweak Station fits 1/10 and 1/8 on-road cars thanks to its unique adjustable base plate system. This universal tweak station works with all nitro on-road cars.Adjustable threaded support feet allow for quick & easy leveling. Rugged and lightweight base plates are CNC-machined from strong yet lightweight aluminum, and black-coated for durability and stylish looks.Strategically milled cavities in the base plates make the HUDY Quick Tweak Station much lighter than other similar products on the market; both left and right sides are identically weighted for perfect balance. Areas around the precision spirit level in the pivoting base plate are milled out to allow easy viewing from any position. Laser-engraved track-width markings (180-310mm) are precisely & accurately laser engraved on the base plates. The center axle is specially ground to be perfectly straight and level, with ends additionally hand ground for precision fitment into the manually-selected precision ball-bearings that are pressed into the base plates. The ball-bearings are degreased and lightly oiled with AeroShell 12T fluid for ultra-free and smooth operation. All of these features combine to make a very lightweight and responsive precision instrument that is exceptionally sensitive to detecting even small amounts of tweak.

DKK 1569.00
1

Seagull Decathlon 120 15-20cc Gas ARF

Seagull Decathlon 120 15-20cc Gas ARF

Seagull Decathlon (120) 2.0m ARF Airplane Features: Approx flying weight: 4.8kg Factory covered with Oracover Ferrari Red 23, White 10 Length: 134cm Radio Needed: 4ch Servos Needed: 6x High powered Engine: 120 4-Stroke Wing area: 66.8sq.dm Wingspan: 200cm The Seagull DecathlonDesigned to sweep away the cares and stresses of 21st century life. Its easy to fly with big, airy, spacious fuselages, super-lasered and laminated components with wonderful glass cloth cowls and spats painted with Rembrandt-like care and accuracy!It suits the intermediate level sport flyer and can be seen as the next stage on from the easy flying Seagull trainers.The Decathlons are all easy to fly and quick to assemble thanks to the usual finished, covered and decorated components. You can probably see they are all factory-built to a very high standard with precision laser-cutting and high quality Oracover film as standard. As usual, the pushrods, the motor mounts, hinges, etc are factory-fitted for the fastest assembly time.Of course, included too are comprehensive fittings kits, pre-painted L/W glass cloth cowls, aluminium wing struts, undercarriage, tail wheel assembly and fully illustrated instruction manuals.Items Needed: 1.20 4-stroke engine 4 channel Radio with 6 servos Glow plug to suit engine Propeller to suit engine Protective foam rubber for radio system Silicone fuel line Thick cyanoacrylate glue 30 minute epoxy 5 minute epoxy Hand or electric drill Assorted drill bits Modelling knife Straight edge ruler 2mm ball driver Phillips head screwdriver 220 grit sandpaper 90 square or builders triangle Wire cutters Masking tape & T-pins Thread-lock Paper towels

DKK 3195.00
1

E10 Michele Abbate Grrracing Touring Car

E10 Michele Abbate Grrracing Touring Car

E10 Michele Abbate Grrracing Touring Car Den sjove og spndende E10 Touring-platform fr et forblffende look med denne replikering af Michele Abbate's Grrracing E10! Denne fantastiske neon gule og sorte bil tilfjer en fantastisk frisk stil til HPI Racings on-road line-up!Tilfjelse af den aGRRessive styling og holdning er det nyeste medlem af HPI-familien, US Touring Car racer, 3-gange SCCA Road Racing Champion, Michele Abbate! E10 er designet, s enhver kan tage rattet og kre en tur! Bilen ankommer lige ud af kassen i Ready-to-Run-form (RTR) med en fuldmalet krop og et formonteret chassis, s s snart at batterierne er ladet op, er du klar til at kre!RTR E10 har en hjtydende elmotor plus en vandtt elektronisk hastighedskontrol, kraftige bremser og solide ophng, s den kan kre og manvrere ligesom den rigtige touring car. En fantastisk kombination af funktioner, udseende, ydelse og pris: E10 Touring er en af de nemmeste mder nogensinde at opleve det sjove og spndende ved at kre en fjernstyret touring bil Specifikationer for E10 Michele Abbate Grrracing Touring Car Officially authorized replica ofMichele Abbate GrrRacing Touring Car Fully assembled E10 touring car chassis SC-3sWP2 Waterproof Electronic Speed Control with Reverse 2.4 GHz radio system for crystal-free, comfortable control 7.2v2000 mAh NiMH Rechargeable HPI Plazma battery HPI Plazma AA batteries for transmitter AC Wall Charger Adjustable body mounts Quick change battery holder Shaft drive 4WD system Shock absorbing foam bumper High torque Saturn 27T 540 motor Precise bellcrank steering Unique swappable motor layout for grip or drift driving 1/10th SCALE 4WD ELECTRIC CAR with 2.4GHz RADIO Length: 14.8" (375mm) Width: Adjustable 7.32", 7.56", 7.80" (186, 192, 198mm) Wheelbase: 10" (255mm) Weight: 2.8lbs. w/o body (1280g) Drive System: Shaft Drive 4WD Drive Ratio: 7.48:1 Du mangler: Intet. E10 Michele Abbate Grrracing Touring Car er 100% RTR. Du skal bare lade batterierne op, s er du klar. Video af E10 Michele Abbate Grrracing Touring Car Link til E10 Michele Abbate Grrracing Touring Car's hjemmeside

DKK 1849.00
1

FMS FMS142PYL - Futura 900mm (64mm Ducted Fan) PNP Yellow

FMS FMS142PYL - Futura 900mm (64mm Ducted Fan) PNP Yellow

FMS 142PYL - Futura EDF Jet 64mm PNP - YellowThe FMS Futura is a licensed sport jet developed by FMS in conjunction with Tomahawk- Aviation. Designed by a Sino-German team of engineers, the Futura represents the pinnacle of what a foam jet can be.Futura is definitely a pleasant surprise for those who struggle to choose between speed and stunts. It has high speed, high maneuverability, and excellent handling performance, satisfying players' needs to experience various flying modes such as free flying, simulation competitions, and stunt flying. The power system is composed of a high-torque 2840-KV3150 brushless motor, a high-stability 40A ESC, and a 4S 2200mAh-2600mAh battery (to be purchased separately), which is paired with 8pcs high-precision 9g servos mounted on the wings, tail, and front steering position, allowing players to easily experience various control techniques and enjoy the pleasure of high-speed flight. In addition, the wings and tail of Futura have been pre-embedded with reinforced ribbons, and the cockpit is firmly fixed in place with buckle, which allows players to perform aggressive turns, rolls, and flips without any concerns. The CNC all-metal landing gear with trailing-link suspension is highly precise and robust, protecting the plane against violent landings.Features: Power system: 2840-KV3150 brushless motor, 40A ESC, 64mm 11 bladed fan CNC all-metal landing gear, trailing-link suspension, highly precise and robust. Oversized electronics bay for easy maintenance. Accepts large capacity batteries. Glueless assembly. The aircraft is built with screws only. Environmentally friendly water-based paint. Buckle design latch prevents unexpected canopy release in flight. Specs: Wingspan: 900mm Overall Length: 995mm Flying Weight: Around 1150g Motor Size: 2840 KV3150 ESC: 40A Servo: 8pcs - 9g Rec Radio: 6CH Channel CG (center of gravity): 85-95mm Prop Size: 64mm Ducted Fan 11-blade Recommended Battery: 14.8V 2200-2600mAh 25c Aileron: Yes Rudder: Yes Flaps: Yes Retracts: No Approx. Flying Duration: 3 minutes Minimum Age Recommendation: 14+ Experience Level: Upper-Intermediate Assembly Time: 10 minutes Wing Load: 71.8 g/dm² Wing Area: 16dm²

DKK 2232.21
1

Tool bag BIG HUDY - 199140

Tool bag BIG HUDY - 199140

Smart, stylish and distinctive and ultra-versatile HUDY Team Carrying Bag is large and spacious enough to carry your 1/10 or 1/8 on-road RC car, tools, set-up equipment and gear to any track with comfort and ease. All walls are cushioned with protective foam, keeping your equipment safe within.This exclusive-edition bag also features two straps for easy connection to a separate HUDY Tool Bag. The separate HUDY Tool Bag can hold up to 30 tools and can be easily removed from the bag and laid down on the pit table. Super-strong stretchy xylan holds the tools and will keep its stretchy characteristics long time.Spacious side pouches are large enough to carry a full-size set-up board. Heavy-duty zippers provide quick and easy access. Two-stage telescopic handle mounted bellow the tool bag enables comfortable pulling together with the wheels.Six wheels are mounted on solid aluminum framework to ensure easy and drag-free movement. The wheels are made from a heavy duty plastic that was selected due to its low wear rate. When the wheels and handle are not the ideal option, there are strong nylon carrying straps with padded handle allow for easy, comfortable carrying.Rear wall features two straps which allow fast and comfortable mounting of accessory bags such as the HUDY Transmitter Bag and/or HUDY Starter Box Bag. An elasticized cord is included so you can mount your RC car atop the bag.The spacious 600x340x450mm interior is easily accessible through the zippered bag end. There is interior room for different combinations of different-sized storage boxes for carrying any type of RC gear (including your car). The bag comes standard with 1 X-large + 2 large storage boxes. The strong, reinforced, waterproof storage boxes are made from a special high-quality rigid composite material for long life and extra durability.Super-stylish carrying bag emblazoned with official HUDY graphics. Standing apart with its attractive full-colour graphics, HUDY also knows how important your equipment is to you.Dimensions (D x W x H)Outer dimensions: 700 x 420 x 560 mmBig box dimensions: 575 x 310 x 190 mmSmall box dimensions: 575 x 310 x 115 mm

DKK 2399.00
1

E10 Drift Fail Crew Nissan Skyline R34 GT-R

E10 Drift Fail Crew Nissan Skyline R34 GT-R

E10 Drift Fail Crew Nissan Skyline R34 GT-R Autentisk GT-R Drift-handling med Fail Crew.Fanfavoriten E10 i Drift-platformen, med et fantastisk udseende fra de fantastiske Fail Crew!Den rigtige version er krt af det russiske Fail Crew-medlem og FIA Drifting champ Arkady Tsaregradtsev, og nu har DU muligheden for at kre en tur i mesteren bil! Fail Crew er en internationalt bestning af driftere, der har sikret sig toppositioner ved de mest prestigefyldte driftstvner. Hvis du skal op mod nogen fra Fail Crew p banen, skal du vre parat til at - ja, fejle! Hvert medlems bil er et objekt af moderne kunst p hjul designet af den bermte russiske kunstner Ciay.E10 er designet, s enhver kan tage rattet og kre en tur! Bilen ankommer lige ud af kassen i Ready-to-Run-form (RTR) med en fuldmalet krop og et formonteret chassis, s s snart at batterierne er ladet op, er du klar til at kre!RTR E10 har en hjtydende elmotor plus en vandtt elektronisk hastighedskontrol, kraftige bremser og solide ophng, s den kan kre og manvrere ligesom den rigtige Nissan Skyline. En fantastisk kombination af funktioner, udseende, ydelse og pris: E10 Drift er en af de nemmeste mder nogensinde at opleve det sjove og spndende ved at kre en fjernstyret drift bil. Specifikationer forE10 Drift Fail Crew Nissan Skyline R34 GT-R Officially authorized replica ofFail Crew Nissan Skyline R34 GT-R Drift Car Fully assembled E10drift car chassis SC-3sWP2 Waterproof Electronic Speed Control with Reverse 2.4 GHz radio system for crystal-free, comfortable control 7.2v2000 mAh NiMH Rechargeable HPI Plazma battery HPI Plazma AA batteries for transmitter AC Wall Charger Adjustable body mounts Quick change battery holder Shaft drive 4WD system Shock absorbing foam bumper High torque Saturn 27T 540 motor Precise bellcrank steering Unique swappable motor layout for grip or drift driving 1/10th SCALE 4WD ELECTRIC CAR with 2.4GHz RADIO Length: 14.8" (375mm) Width: Adjustable 7.32", 7.56", 7.80" (186, 192, 198mm) Wheelbase: 10" (255mm) Weight: 2.8lbs. w/o body (1280g) Drive System: Shaft Drive 4WD Drive Ratio: 7.48:1 Du mangler: Intet. E10 Drift Fail Crew Nissan Skyline R34 GT-R er 100% RTR. Du skal bare lade batterierne op, s er du klar. Video af E10 Drift Fail Crew Nissan Skyline R34 GT-R Link til E10 Drift Fail Crew Nissan Skyline R34 GT-R's hjemmeside

DKK 1749.00
1

KYOSHO K.30613 - Kyosho Scorpion 2WD 1:10 Kit *Legendary Series*

KYOSHO K.30613 - Kyosho Scorpion 2WD 1:10 Kit *Legendary Series*

The ultimate revival! Get ready for the resurgence of Kyosho s famous Scorpion! In the spirit of the original but with upgrades throughout! The legendary Kyosho Scorpion is credited with taking the racing buggy category into the realm of pure motorsports. Even after 30 years since it was first released in 1982, the indelible mark of the Scorpion still exists with its many fans around the world. Kyosho is proud to renew this machine to all its former glory! While maintaining the wild and free spirit of the original baja buggy style and chassis layout, the 2014 version features the latest in performance technology and sacrifices nothing in speed and endurance on modern buggy racing tracks. Externally it may look like the original Scorpion with its semi-trailing suspension arms, but the advanced 6061T6 forged aluminum material delivers futuristic levels of strength, rigidity and durability. Following the original design, the Scorpion 2014 features a new two-piece die-cast aluminum gearbox with differential gears. In addition, the included slipper clutch protects the transmission as well as delivers efficient traction that takes the Scorpion s control feel and durability to a new higher level. Precision 48 pitch gears reduce traction pulsation for direct driving control characteristics while the flat under surface of the countersunk chassis has no protruding screw heads for minimal contact resistance and scraping, resulting in higher durability. Stainless shafts combine with aluminum cylinders in the oil shocks for smooth stroke from top to bottom and running performance worthy of a true racing buggy. Like the original Scorpion, the 2014 version is packaged as an unassembled kit, but nearly all tapping screws and nuts have been replaced with the improved lightweight and security a hex screws. From expert racers who knew the magic of the original Scorpion to modern-day racers, discover for yourself why the Scorpion 2014 commands such respect! - Revival of the famous Kyosho Scorpion. High performance upgrades are featured throughout the 2014 version. - Kit with pre-assembled gearbox and oil shocks (to be installed). - Countersunk surface allows screws to be seated flat. - Lightweight design reduces use of nuts and tapping screws. - Ball diff from Ultima RB can be installed as an optional upgrade. The Kyosho Scorpion is back with its stylish aerodynamic design. Front and rear suspension arms are made from 6061T6 forged aluminum. There is no higher level of precision, rigidity, durability and lightness. Wide front tread delivers increase driving stability. Includes two-piece diecast aluminum gearbox with built-in diff gears. Slipper clutch included can be set according to various surface type conditions. Sintered alloy and nylon combine in 48 pitch gears to deliver superior efficiency. Includes two gears for high-speed and low-speed settings. Ball differential is also available as an optional upgrade. Main frame, front & rear shock stays and sub frame plate are made from 6061T6 aluminum. Underside of chassis is countersunk for a flat finish. Aluminum cylinders and stainless shafts of the oil shocks produce effective damping and are finished in the original Scorpion’s signature color caps. Original style combines with a new pattern on the included high grip tires. Rear tires are equipped with inner sponges. Realistic molded wheels feature a satin chrome finish. Radio box also takes care of cable management and is suitable for the shapes and sizes of most current batteries. Separate head section on the driver figure and sharp nylon wing deliver realistic scale form.

DKK 2237.72
1

X12'23 US Specs - 1/12 Pan Car - 370018

X12'23 US Specs - 1/12 Pan Car - 370018

XRAY X12 2023 - US-SPECFeatures 2023:All-new chassis featuring extra forward position for center pivot for improved cornering speed and steering respons.Chassis features extra mounting position for the side braces between the front and center position for extra fine tuning of the car flex which improves steering response and cornering speed.The chassis is shortened by 3.5mm in front with extra chamfer, which eliminates chassis dragging and improves cornering speed.The chassis features 4 positions for the front battery backstop in 2mm steps instead of the groove to prevent the battery stop from moving in hard crashes.Rear POD plate features redesigned area of the alu POD plate pivot holder for improved durability of the POD plate.Rear POD features 2 centering holes instead of 1 to eliminate tweak issues in crashes.Bulkheads were completely redesigned to achieve maximum low CG and weight to improve stability and eliminate tweaking issues in serious crashes.Bulkheads are 5mm lower and 4g lighter compared to the previous version.Bulkheads feature new smaller and lower CG window for eccentric bushings.Bulkheads feature 2 centering pins instead of one for better centering and to prevent the tweaking issues in hard crashes.Bulkheads feature new mounting position for the rear brace, from top instead of rear, for improved tweak resistance, as well as only one mounting position instead of two, for improved flex of the rear POD.All-new graphite rear brace is thinner and lighter for improved CG and flex of the POD.All-new smaller and lighter eccentric bushings with finer steps, for improved ride height adjustability, and a lower center of gravity.All-new lighter wheel hubs with M2x5 screw instead of M2.5x8 to eliminate rotating weight and to eliminate vibration of the wheel hub.All-new lowered rear brace mounts (4mm) and side brace mounts (1.5mm) to allow to mount rear graphite brace with side braces as low as possible to lower CG and stability of the car.All-new rear brace also features mounting holes for the battery backstop.All-new rear graphite POD upper plate redesigned to use super light aluminium bushings instead of nuts, to save the weight and lower CG and improve the look of the car.Rear graphite plate is mounted 6.5mm lower to lower the CG to the maximum, and to eliminate tweak issues in crashes. The side tubes are mounted from top for a quicker assembly and disassembly.All-new rear brace is mounted 4mm lower, for a lowered CG, and feature holes for bushings to mount side braces for a better look.All-new battery mounting system with improved reliability and ease of battery installation. The front battery stop is mounted into the chassis and can be moved in 2mm steps forward or backwards to eliminate the possibility to shift the battery forward in crashes and is centered by the shock post to eliminate the possibility for the battery stop to shift sideways.Improved flex in front suspension using double front brace system. For improved steering response and cornering speed.Updated steering backstops for better reliability and ease of adjustment.All-new foam bumper redesigned for better clearance when using a setup station.All-new nickel coated surface on the king pin axles for smoother damping action.

DKK 3195.00
1

Ford Fiesta ST Rally 1/10 4WD TQ RTR u. batteri/lader

Ford Fiesta ST Rally 1/10 4WD TQ RTR u. batteri/lader

Ford Fiesta ST Rally 1/10 4WD TQ RTR UPDATE: 2023.6 - bilen er endelig p lager igen! Ford Fiesta ST Rally er en konkurrencedygtig rallybil, der har en fantastisk ydeevne, bde nr du krer p asfalt og nr du tager den med offroad. Den har et lavt tyngdepunkt (Low-CG) chassis, der gr den yderst fleksibel. Nr fortovet slutter og din tur gr videre offroad, s graver dens brede dk sig ned og du vil erfare, at du fr alletiders rally action. Ford Fiesta ST Rally er alts klar til at performe p bedste vis bde on-road og offroad. Derudover fr du med Ford Fiesta ST Rally den kraftfulde Titan 550 motor, der nok skal f dig og din Ford Fiesta ST Rally skudt godt derudaf. Du kan kre med Ford Fiesta ST Rally hele ret uanset vejr og vind for al elektronik er vandtt. Kort fortalt s er Traxxas Ford Fiesta ST Rally bare klar til at race derudaf sammen med dig uanset underlag. Den er nemlig blevet bygget til, at du kan opleve en realistisk, spndende og intens krsel med masser af action. Bliv klar til intens rally action med Ford Fiesta ST Rally kbt hos Fjernstyret.dk. Specifikationer forFord Fiesta ST Rally 1/10 4WD TQ RTR SE SPECIFIKATIONER P ENGELSK NEDERST I TEKSTEN Skala: 1/10 Svrhedsgrad: Begynder Topfart: 48 km/t Vgt: 2.77 kg Lngde: 535 mm Hjde: 206 mm Dk (For/Bag): 2.2" 12-Spoke Rally Replica Motor: Traxxas Titan 12T 550 Radio System: TQ 2.4GHz Radio med #6519 3-Channel Micro Batteri: Ikke inkluderet - se udvalg herunder Lader: Ikke inkluderet - se udvalg herunder Modelnummer: TRX74054-4 Du mangler: 2S LiPo batteri eller 7-cell NiMH batteri(se udvalg herunder) Lader med iD-stik ((se udvalg herunder) 4 AA batterier til transmitteren (kan tilkbes hos Fjernstyret.dk) Video af Ford Fiesta ST Rally 1/10 4WD RTR TQ w/o Battery & Charger Link til Ford Fiesta ST Rally 1/10 4WD RTR TQ w/o Battery & Chargers hjemmeside Specifikationer p engelsk: (opdateret 2023) RALLY (#74054-4) SPECS: Length: 535mm Front Track: 281mm Rear Track: 281mm Center Ground Clearance: 21mm Weight: 2.77kg Height (overall): 206mm Wheelbase: 324mm Shock Length: Long (front), XXLong (rear) Tires: Traxxas 2.2" Pre-Glued with Foam Inserts Tire Diameter: 4.02 inches (102mm) (front and rear) Wheels (front/rear): 2.2/3.0 12-Spoke Rally Replica Wheel Diameter: 2.2 inches (56mm) Outer / 3.0 inches (76 mm) Inner Speed Control Type: XL-5 Electronic Speed Control Motor (electric): Titan 12T 550 (12-Turn) Overall Drive Ratio: 19.69 (stock, out-of-box) Differential Type: Hardened Steel Bevel, Sealed, Limited Slip Gear Pitch: 48 Chassis Structure/Material: Molded Tub / Nylon Composite Drive System: Shaft-Driven, Direct Drive 4WD Steering: Dual-Bellcrank with Integrated Servo Saver Radio System: TQ 2.4GHz Radio with #6519 3-Channel Micro Body: Licensed Ford Fiesta ST Rally Body Skill Level: 1 Included Accessories: Precision Tool Set Required Items: Battery, charger & 4 "AA" Batteries (for transmitter) XL-5 (WATERPROOF) ESC SPECIFICATIONS: Input voltage: 4-7 Cells NiMH or 2S LiPo (4.8 to 8.4 Volts DC) Motor Limit: 15-turns** (540 Size) / 12-turns** (550 Size) BEC Voltage: 6VDC BEC Current: 1A Low Voltage Detection (LVD): 2-Stage indicators, switchable (on or off) Thermal Protection: Thermal shutdown Single-button setup: Yes, Traxxas EZ-Set Profile selection: Sport Mode: 100% FWD, 100% brakes, 100% REV Race Mode: 100% FWD, 100% brakes, no REV Training Mode*: 50% FWD, 100% brakes, 50% REV

DKK 2595.00
1

Castle Creations MAMBA MAX PRO 1:10 25V Car ESC w/1406-6900 motor - 010-0066-08

Castle Creations MAMBA MAX PRO 1:10 25V Car ESC w/1406-6900 motor - 010-0066-08

Mamba Max Pro 1/10th Sensored & Sensorless ESC: Castle is Ready to ROAR Castle, the leader in brushless technology for RC cars, is pleased to announce the release of our new Mamba Max Pro brushless ESC featuring SMARTSENSE? operation. SMARTSENSE brings the best of sensored and sensorless ESC together to create the ideal controller for serious 1/10th scale enthusiasts. Operating at up to 6S, Mamba Max Pro can handle nearly twice the power of the market standard Mamba Max!Castle Builds A Sensored Controller?Hey, we?re never going to just go with the flow, so we?ve built the best of both worlds into the new controller. SmartSense uses the motor sensors to start the motor and then it switches over to Castle?s ultra powerful and efficient dynamic sensorless mode which boosts motor efficiency. Simply put, you?ll get more power and less heat from your motor. Sensored Only mode runs sensored motors using sensored timing only. CHEAT MODE, Castle?s High Energy Advanced Timing allows users to electronically advance their sensored motor?s timing to extreme settings. This can often yield just that extra bit of power needed to win the race. Be careful ? there?s never a free lunch, extra power comes with extra motor heat! OK, now I?m confused. Is Sensored better than Sensorless?The answer is that for most users, Sensorless operation is still better. Castle?s Sensorless controllers offer best in class start up and braking which are fine for most users. Sensored only motor operation cannot deliver maximum efficiency. Sensors are terribly inaccurate for motor timing purposes as the motor?s magnetic fields change under load or at speed; that?s where Sensorless operation shines. Sensorless is also just more dependable. There are fewer wires and connections that need to survive the incredibly rough treatment most RC cars and trucks endure. Some guys do need sensored operation, mainly because the racing world?s rules require it, but also because it can offer slightly better start up and braking performance. Mamba Max Pro offers the ultimate in flexibility: use it with all your 1/10th motors, sensored or sensorless!I?m over the shock of the sensor port. Tell me what else you?ve packed into the Mamba Max Pro. 6S (25.2 volts) max input voltage. Switching BEC powers your radio and servo all the way up to the 6S max input. Users may select the output for any voltage between 5V and 7V. Durable case and cooling fan to protect and cool the controller during hard off-road action. Ready to Run: Mamba Max Pro is ready to run out of the box. Castle Link Compatible: Like all Castle controllers, the Mamba Max Pro may also be ?tuned? for the drivers? preferences in the throttle curve, brake strength, reversing modes and more. Access these features with the Castle Link USB connector and a PC for even more versatility. If you do not already have a Castle Link, you may use the coupon included in this package for a free Castle Link. Castle 1:10 FAQ'sMamba Max Pro Specs: Cells: 6s LiPo Brake: Proportional with adjustable curve Reversible: Yes - with lockout Low Voltage Cutoff: Programmable Size: L46.85 x W37.2 x H32 mm Weight w/wires: 81 g Connector: 4mm bullet Neu-Castle 1406-6900KV Motor So how do you improve upon the already awesome CM36 series? Work with motor guru Steve Neu to change the motor from a slotless design to one with a 1.4 inch diameter slotted stator. Then change the single neodymium rotor magnet from a 2 pole donut to a 4 magnet, four pole rotor for more torque. Throw in better manufacturing, high quality bearings and a removable end bell and you have the new 1406 series of high performance motors from Castle. The end result is an all new motor that cranks out 30% more torque with all the efficiency and endurance that Castle is known for. These motors are bolt in upgrades for most all 1/10 applications and come in the now-standard ratings of 4,600kv, 5,700kv, 6,900kv and 7,700 kv for easy transition for dealers and customers alike. 1406-6900KV Motor Specs: 6900KV Size: L49 x D36 mm Shaft: 1/8" Weight: 169.5 g

DKK 1795.00
1

KYOSHO K.30637B - Kyosho EP Fantom 4WD Ext CRC-II 1:12 Kit *Legendary Series*

KYOSHO K.30637B - Kyosho EP Fantom 4WD Ext CRC-II 1:12 Kit *Legendary Series*

Amazing running agility! "FANTOM EP-4WD Ext" is the last reincarnation of the famous FANTOM EP form! Two years after the seismic impact of the FANTOM EP-4WD’s debut win, the "FANTOM EP-4WD Ext" stunned the world by achieving the same feat against an even more competitive field at the 1985 Japan Championship. Racing surface conditions at that time were improving and race formats changed from the fiery 4-minute races to 8-minute endurance races. The "FANTOM EP-4WD Ext" was developed to meet this trend. Kyosho was the first to introduce the chain + one-way 4WD system developed for 1/8 engine models into 1/12 electric racing cars. The front one-way system enabled power to be applied earlier through corners, allowing for more aggressive driving. On the other hand, energy efficiency didn’t improve and it was prone to stalling when power was taken off. In the Ext, high-dimensional fusion of the 3P suspension reinforces weak points. 2.2mm suspension stroke is realized through specially shaped springs creating a "progressive spring effect" by compressing the suspension according to the roll amount of the chassis when entering a corner, and then extending from when it starts clipping too much to minimize stall when power is taken off. At the same time, energy efficiency is improved by reducing the time power is ON. The main chassis has been enhanced with an evolved front suspension to deliver increased rigidity from a reinforcing plate on the front that allows optimal movement of the suspension. Incorporating the direct servo saver into the steering servo increases the front load, allowing the chassis to be shaped so that the rear rolls and pitches flexibly in sync with the front. Oil damper is added for pitching control to improve the ground contact of the rear. When first developed, the Ext was focused on weight reduction and its 880g was lighter than the first generation. The commitment to light weight remains in this relaunched version with the inclusion of lightweight knuckle arms and wheel nuts. Please enjoy this modernized version of Kyosho’s timeless classic, the "FANTOM EP-4WD Ext", which is the 11th model in the vintage series. - Recreates the style and atmosphere from its debut in 1985, with a thorough modernization of each component. - FANTOM EP 4WD Ext faithfully reproduces the chassis design including its distinguishing 3P suspension and ladder chain + front one-way bearing 4WD system. - Features the same 3P suspension structure from the original with a specially shaped spring in the kingpin on the front plus machined aluminum oil damper on the rear for pitching control. - Unique shape of the main chassis exerts the same suspension effect due to torsion as the original design. A reinforcing plate is layered on the front for additional rigidity. - Redesigned for ESC compatibility in place of the rotary speed controller from the original, allowing brushless motor & ESC combination. Front plate features mounting holes for Le Mans 240S ESC. - Newly designed machine-cut aluminum steering servo provides adjustable mounting that corresponds to various sizes. - Newly designed direct servo saver with a double ring spring produces the spring rate to realize improved reliability and direct steering feel. - Machined aluminum rear axle features a height adjuster mechanism that was not available in the original. Vehicle height and chain tension can be adjusted. - Long-type 48 pitch 21T long-type pinion gear is included as standard. 14T to 27T are available in standard shape as options. - Front and rear tires have been changed from the original sponge to rubber-sponge compound on both front and rear, greatly improving grip and reducing tire wear, which was a problem at the time of the original. - Popular with competitive racers, the same CRC-II body design used by Junichi Koma for the FANTOM’s ‘win on debut’ at the 1985 Japan Championship has been faithfully reproduced. Produces excellent aerodynamic balance. - Included decals and simple coloring can reproduce the style of the original package model. (The driver doll needs painting) The FANTOM was the first electric R/C car in the world to adopt the ladder chain + front one-way bearing drive system, and in combination with an integrated 3P suspension system, delivered superior cornering speed and driving agility. The CRC-2 body and its reputation for excellent aerodynamic performance has been faithfully reproduced. The long front overhang and full-body wedge produces handling stability with minimal aerodynamic variation due to speed. Includes decals to recreate the model on the package. Special spring produces a progressive suspension effect that changes according to the amount of roll and ensures suspension stroke, even in a small space. New front sprocket, special swing shaft (right only) and lightweight knuckle arm, deliver maximum steering angle.Compatible with optional carbon suspension arm (No.EFW005). Chassis is shaped to deliver rear suspension effect. Newly

DKK 1955.53
1