51 resultater (0,26170 sekunder)

Vis alle filtre

Mærke

Vis alle

Farve

Butik

Pris (EUR)

Nulstil filter

Produkter
Fra
Butikker

XRAY XT8E 19 1/8 El-Truggy - 350300

XRAY XT8E 19 1/8 El-Truggy - 350300

XRAY XT8E 2019 Electric Truggy KitAll-New Features:Front suspension geometry featuring new C-hubs and steering blocksZero king pin steering block with exchangeable steering plates for Ackermann adjustmentFront and rear CVD drive shaftsChassis design is now fully compatible between XT8 & XT8E platformsRear shock tower redesigned to fit the new wing mount and gearbox brace40% lighter wing mount for super-low CG with new mounting locationsRear uprights with 8x16x5mm outer ball-bearings for increased reliability and lifespan2.6mm front anti-roll bar improved corner speedSofter ribbed shock membranes

DKK 4695.00
1

NT1'23 - 1/10 Luxury Nitro TC - 330017

NT1'23 - 1/10 Luxury Nitro TC - 330017

XRAY NT1 2023 1/10 On-Road Nitro Racing Kit2023 Features:All-new chassis with narrowed front suspension pivots increases stability & tractionHard composite suspension arms combined with the improved central chassis flex keeps the suspension geometry stable while the flex is transferred through chassis and radio plate to maintain tractionNarrower front and rear suspension holders for improved traction and stabilityLower down-stop mounting holders without the eccentric geometry make the car easier to set suspension down-stopsAll-new front aluminum bulkheads accommodate new upper arm holder with adjustable flexRedesigned front upper arm holder features new roll center positions in all 9 positionsUltra-compact and super lightweight receiver box moves the weight lower and closer to the center of the chassisRadio plate with new servo holders moves the throttle servo more rearwards, the steering servo more frontwards and receiver box with a more central locationServo saver stand with key lock designFuel tube holders are mounted directly on the radio tray for a clean installationSimplified aluminum 2-speed shaft holders eliminate unnecessary braces to make the chassis more flexible, while the wider positioning provide improved support for the 2 speed shaftPulley collar is optimized for the fixed position of the pulley on the 2-speed shaftNew rear aluminum bulkheads have a 2mm front/rear wheelbase adjustment for easy traction tuning depending on the track conditions. Front position more traction, rear position more stabilityLonger rear suspension pins for wide range of wheelbase adjustmentBoth redesigned rear suspension holders and milled pockets in the chassis plate reduce the lowest pin position to generate more traction when neededAnti-roll bar bearing bushings front and rear for different thickness of anti-roll barsNew redesigned rear anti-roll bar wire to accommodate narrower suspension and new shape eliminates any collisionRedesigned front anti-roll bar collar to eliminate any collisions2-speed shaft adapter for rear belt pulley uses longer pins for brake disk for increased reliabilityIncluded ultra-stabile clutch spring for more reliable clutch settingNew guide pins provide smooth movement of the brake padsLonger front lower pivot balls account for the narrower front suspension pivot to maintain necessary width adjustmentsGraphite rear roll-center bridge is simplified and features more clearance above the rear belt with optimized roll center positionsWider front lower bumper included in the kit for improved lower aerodynamics and improves protection of the body

DKK 5749.00
1

T-Maxx 3.3 4WD RTR TQi TSM Telemetry

T-Maxx 3.3 4WD RTR TQi TSM Telemetry

T-Maxx 3.3 4WD RTR TQi TSM Telemetry TRX 49077-3 T-Maxx 3.3 er den strste Maxx nogensinde i Nitro! Den opdaterede version er mere aggressiv, har en brutal lyd og er fyldt med power. Kr hurtigere, hop hjere og brug din kreativitet til at finde nye off-road udfordringer... T-Maxx er en fjernstyret nitrobil, som ikke stopper! De gigantiske Maxx All Terrain dk (6.3") har et rigtig godt greb off-road og ger frihjden til hele 106 mm, s denne fjernstyret bil kan kaste sig over store sten, store rdder m.m. Bymssige forhindringer, som kantsten og trapper, er nsten en fornrmelse for T-Maxx 3.3 - for den er bare hardcore. Traxxas Stability Management (TSM) gr, at du bedre kan kontrollere din T-Maxx 3.3s ekstreme power, hastighed og acceleration p glatte overflader. En fjernstyret bil, som T-Maxx 3.3 har selvflgelig en justerbar wheelie-stang med hele 4 positioner. Du kan derfor vlge, hvor vild action du vil have, nr du giver den gas. Selv p 2 hjul er T-Maxx 3.3 hurtigere end mange andre fjernstyrede biler, der krer p alle 4 hjul. Der er ikke sparet p noget, s se videoerne og gld dig til det vildeste nogensinde!!!!!!!OBS: Dette er en fjernstyret bil p nitro, som er en variant af brndstof - det krver lidt fordybelse og tlmodighed at kre med en sdan bil. Du mangler: Brndstof, 25%, se nitrobrndstof HER Adapter til lysnet (220V). Benyttes til medflgende billader - se den HER 4 x AA-batterier,f.eks. disse Video: Leveres fuldt frdigsamlet og klar til krsel. Power-UP, reservedele og tilbehr kan findes p Fjernstyret.dk. Specifikationer: Skala: 1/10 Svrhedsgrad: Level 4 Topfart: 72 km/t Vgt: 4.536 kg Lngde: 539 mm inkl. wheelie bar Hjde: 277 mm Frihjde: 106 mm Akselafstand: 335 mm Motor: TRX 3.3 Nitro Power Transmission: Wide-Ratio Two-Speed Forward-Only Radio System: Traxxas TQi 2.4GHz Radio System med Traxxas Link Wireless Module (3-Channel) Tankkapacitet: 125 cc Modelnummer: 49077-3 Link til producenten: https://traxxas.com/products/models/nitro/tmaxx33-tsm?t=overview

DKK 4695.00
3

Seagull Nieuport 28 Replica Bipe 20-26cc Gas ARF

Seagull Nieuport 28 Replica Bipe 20-26cc Gas ARF

Seagull Nieuport 28 Replica 20-26cc Gas ARF flyvemaskine Let og manvredygtig, Nieuport 28 flj frste gang i juni 1917. Det var det frste jagerfly fra selskabet, der benyttede en standard to-spar vinge. Den strmlinede skrog var for slank til to Vickers kanoner, s den ene skal monteres p skrogsiden. Seagulls model er stor og smuk med en laserskret balsa/lagstruktur, dkket af gte Oracover. En meget praktisk model til alle rstider.Funktioner: Balsa- og Balsa-krydsfiner af hj kvalitet tilbyder letvgts, state-of-the-art konstruktion Eye Catching Scale Farveskema Autentisk trimskema dkket af gte Oracover-film Fabriksmalet glasfiberrr, leveres med dummy roterende motor Meget detaljeret cockpit med malet pilotfigur tilfjer skaladetaljer Landingsstel i aluminium Imponerende skalakontur med pull-pull ror Designet til benzin, gld eller elektrisk strm Vingetransportrammer inkluderet for at reducere tid ved montering og adskillelse af modellen Skala udseende hjul og mrkater Omfattende hardwarest medflger Specifikationer: Vingefang: 172,7 cmLngde: 139,8 cmVingeareal: 74,6 dm2Vgt: 5,8-6 kgAnbefalet motorstrrelse: 20-26cc 2-takts gas/nitroAnbefalet EP-motorstrrelse: 1100-2000W / ESC: 85A / 8-9s LiPoAnbefalet radio: 5 kanaler med 6 servoerFrdighedsniveau: Middel/avanceret

DKK 4279.00
1

90-deg Rotating Retract Electric TF Giant F4U Corsair

90-deg Rotating Retract Electric TF Giant F4U Corsair

Robart Top Flite Giant F4U Corsair Electric MainsThese are the Robart 148E 90 1/5 scale Electric Powered Rotating Retracts.FEATURESFits the Top Flite Giant Scale Corsair and other similar modelsAircraft steel and aluminum constructionFunctional chrome moly steel oleo struts and 1/4" axlesStatus lights added to indicate system conditionJumpers replaced by DIP switches for easier setting changesProprietary plug design eliminates improper connections2-wire design to easily change retract directionAmp-Out circuitry senses travel limits or obstructions and shuts off the motor to prevent draining batterySPECIFICATIONSTotal Length in Raised Position: 10-5/16" (270mm) (measured with 4.5" diameter wheel)Side Plate Length: 4-3/4" (121mm)Side Plate Width: 2-1/2" (63.5mm)Distance/Mounting Hole Centers Same Side: 3-3/16" (81mm)Distance/Mounting Hole Centers Opposite Side: 2-1/16" (52mm)Arc from Raised to Lowered Position: 9.3" (236mm)

DKK 4895.00
1

XRAY X4'22 - Alu Solid Edition - 300034

XRAY X4'22 - Alu Solid Edition - 300034

XRAY X4 Aluminium Solid Edition - The Next Generation 1/10 Touring Car2022 All-new Features:Next generation X4 touring car platform features an advanced upper/lower arm suspension mounted to new bulkhead framework and a narrowed chassis layout to push performance to the next levelUnique CFF - Carbon Fiber Fusion upper and lower suspension arms for outstanding handling & durabilityAll suspension components mount directly to the CFF arms without any additional brackets, inserts or bushings for accuracy and reliabilityARS suspension with highly adjustable geometry settings including roll center, caster and an active toe adjustmentPrecision Hudy Spring Steel pivot balls in all suspension pivots for smooth suspension movementHubs are universal front and rear to reduce the number of spares for easier maintenanceAnti-roll bar shapes match the updated mounting points on the CFF suspension armsAluminum shock towers with multiple shock mounting positions for maximum adjustabilityUpper bulkheads with caster inserts for quick setup changes feature centering pins for precise installation and improved reliabilityLower bulkheads updated with raised diff height option for improved cornering speedBulkheads and motor mount feature centering pins for easy assembly and consistent geometry settingSuper-strong one-piece motor mount for better reliability and has special countersunk holes for purpose-made tweak-free top deck screwsMotor mount features two battery backstops with integrated adjustable belt tensionersGraphite, Flex Aluminum or Solid Aluminum versions available to maximize out-of-the-box performancePerfectly symmetrical chassis designed to work with the all-new CFF suspensions, motor mount and bulkheadsTop deck with a narrow shape for easier installation & improved handlingVarious Multi-Flex settings out of the boxImproved front flex characteristics from the front aluminum chassis brace underneath the solid axleRear body mounting system is connected directly to the chassis for improved downforce and tractionAdjustable front body up-stop system incorporated into the front upper arm allows for lower front body positioning to improve high speed steering & stabilityServo mount with reversible direction has multiple flex options with the universal design to fit all servosUpdated battery holder with graphite spacers for a more secure battery mountingUpdated front solid axle & rear gear diff for a centered rear belt position that improves consistency & forward tractionAluminum layshaft redesigned for new belt positions and easier to access spur gearSuper narrow, lightweight & perfectly balanced wheel hubsLonger driveshafts in both front & rear for better stability and drivetrain efficiencyImproved steering system with a more efficient geometry and lower height for reduced play and more consistency & adjustabilityAluminum steering arms included in the kit with improved geometrySteering bridge with adjustable steering backstop to control steering angle

DKK 5795.00
1

Retract 1/5 AT-6

Retract 1/5 AT-6

AT-6 Main Gear 1/5 Scale 5 1/4" Wheel Max. (pair).These pneumatic retracts designed exclusively for use in Ziroli, Yellow Aircraft, and Byron 1/5 scale AT-6. Aircraft steel and aluminum construction are used throughout the retract mechanism. Big 5/8 dia. struts and 7/16 dia. offset oleos make these retracts strong enough for aircraft weighing 20 to 40 lbs. Other features include positive up and down locks, Adjustable oleo strut for toe-in and toe-out, and 1/4 steel axles. Made to fit up to a 5 1/4 wheel.Robart Air Control Kit Required - Sold Separately

DKK 4895.00
1

Ziroli F9F Panther Tri-Gear set

Ziroli F9F Panther Tri-Gear set

Ziroli F9F Panther Pneumatic Tri-Gear Retract Set with RoboStruts (set).These 630 series of pneumatic retracts are designed for specfic R/C aircraft weighing up to 24 lbs. These retracts are constructed the same as the standard 630 series retracts with heat treated aluminum alloy frames and trunions, these gear are furnished with either a 7/16 or 1/2 dia. 4130 alloy steel tubular RoboStruts. They offer long dependable service for large aircraft flying off grass or paved runways. Powered by a 1/2 bore triple sealed Robart air cylinder, all of these units feature positive up and down locks.Robart Air Control Kit Required - Sold Separately

DKK 4895.00
1

Reatract Set Top Flite Bonanza/T-34

Reatract Set Top Flite Bonanza/T-34

Top Flite Bonanza / T-34 Pneumatic Tri-Gear Set (set).These 630 series of pneumatic retracts are designed for specfic R/C aircraft weighing up to 24 lbs. These retracts are constructed the same as the standard 630 series retracts with heat treated aluminum alloy frames and trunions, these gear are furnished with either a 7/16 or 1/2 dia. 4130 alloy steel tubular RoboStruts. They offer long dependable service for large aircraft flying off grass or paved runways. Powered by a 1/2 bore triple sealed Robart air cylinder, all of these units feature positive up and down locks.Robart Air Control Kit Required - Sold Separately

DKK 4199.00
1

Pitts Special 1500mm EP/GP ARTF V2

Pitts Special 1500mm EP/GP ARTF V2

PITTS - Glow or EPALL BALSA & PLYWOOD CONSTRUCTIONCOVERED WITH ORACOVERThe classic and agile Pitts Special, just Black Horse style and quality.!The Pitts Special is well known for it's aerobatic prowess and the Black Horse version is more than up to that demand. Compact and light, the recommended 1.20 four stroke engine will haul her around the sky with easy. The attention to weight in the design ensures that low speed handling is far better than you would expect for this kind of model.Accurately constructed thoughout in Laser cut balsa and ply and then expertly covered in Oracover at the Black Horse factory. Black Horse have built up an enviable reputation for construction quality. Even the most complex of curves have been reproduced. The durable GRP cowl and complete set of hardware makes this Pitts very 'Special'!Not a model for beginners or those progressing from trainers, but quite manageable for a moderately experienced pilot.SPECIFICATIONS:Wingspan: 1500 mmLength: 1330 mmWeight: 4.7 kgWing area: 74 dm2Wing loading: 64 g/dm2Wing type: Naca AirfoilLanding gear type: Aluminium Hi-grade for main gear and spring wire for tail gear (included)Parts listing required (not included):Radio: 6 channelsServos: 7xServo mount: 21 x 42 mmEngine: 1.20 2 stroke or O.S.GT 22cc GasElectric motor: Brushless outrunner 1800-2300W, 450KVPropeller: Suit with your engineRecommended motor and battery set up (not included):Motor: RIMFIRE 1.20LiPo: 6S 4000-5000 mAhESC: 80A

DKK 3939.64
1

Rotating Retracts Electgric 100 deg. Large Scale (2)

Rotating Retracts Electgric 100 deg. Large Scale (2)

100 degree Large Rotating Electric Retracts (pair)These electric operated retracts are constructed from aircraft steel and aluminum components. They feature positive up-locks, functional 4130 chrome moly steel oleo struts and 1/4 inch axles. The struts rotate 90 when retracted making these retracts ideal for use in 1/5 scale models of F4U Corsair, P-40 Warhawk, F6F Hellcat and AD-1 Skyraider.(Include Robart Electric Control Unit)

DKK 7495.00
1

100 deg large scale retract

100 deg large scale retract

100 degree Large Rotating Retracts Pneumatic (pair).These pneumatically operated retracts are constructed from aircraft steel and aluminum components. They feature positive up-locks, functional steel oleo struts, triple sealed 5/8 dia. air cylinder and 1/4 inch axles. The struts rotate 90 when retracted making these retracts ideal for use in 1/5 scale models of F4U Corsair, P-40 Warhawk, F6F Hellcat and AD-1 Skyraider.Note, Robart Air Control Kit Required - Sold Separately

DKK 4895.00
1

Traxxas TRX95096-4 - Sledge 1/8 Truck 6s Belted Red

Traxxas TRX95096-4 - Sledge 1/8 Truck 6s Belted Red

Klar til at opleve ekstrem 6s kraft? Oplev Traxxas Sledge – en 1/8 skala truggy, der hæver barren for holdbarhed, kontrol og køreglæde. Med belted Sledgehammer® dæk, et brutalt kraftfuldt drivsystem og et innovativt klipfrit karrosseri, er Sledge bygget til at dominere ethvert terræn. Designet til 6s ydeevne Sledge er den eneste truggy i sin klasse med en 6s-kompatibel drivlinje, konstrueret til maksimal holdbarhed og ydeevne. Større tandhjul, mere stål og uovertruffen kraft – dette er maskinen, der bryder alle regler. Uovertruffen chassisstyrke Det patenterede T-Bar™-chassis kombinerer en dybformet aluminiumsplade med et komposit-gittersystem – skabt til at modstå selv de hårdeste stød og hop. Klipfrit karrosseri Fjern og monter karrosseriet på få sekunder med det unikke klipfrie system – hurtigere, nemmere og mere holdbart end traditionelle body clips. Power servo med metalgear En kraftig servo med aluminiums-hus og høj drejningsmoment sikrer præcis og pålidelig styring – lige fra starten, uden opgraderinger. Velineon® VXL-6s system 2000 kV brushless motor og den avancerede VXL-6s regulator leverer ekstrem acceleration og tophastighed med avanceret tuning og køling. Belted Sledgehammer® dæk Forstærkede dæk giver maksimal kontrol, mindre udvidelse ved høje hastigheder og et bredere kontaktområde – perfekt til både off-road og asfalt. Specifikationer Længde (inkl. vinge): 604 mm Sporvidde for/bag: 459 mm Frihøjde: 50 mm Vægt (uden batteri): 5.77 kg Højde: 214 mm Akselafstand: 384 mm Støddæmperlængde (for/bag): 128 mm / 144 mm Dækstørrelse: 170 x 84 mm Fælgdiameter: 97 mm (3.8") ESC: Velineon® VXL-6s (3485) Motor: Velineon® 2000 kV Brushless Gear Ratio: 17.2 (13/52) Differentiale: Forseglet, hærdet stål, limited slip Tandhjulstype: Modul 1.0 Chassis: 3.2 mm aluminiumsplade Bremsetype: Elektronisk Drivsystem: 4WD med aksel Styresystem: Dobbelt klokkearm med metalarm Hjul & Dæk: 3.8" fælge med belted Sledgehammer® dæk Radio: TQi™ 2.4 GHz med TSM® Servo: Vandtæt 2275 metalgear (347 oz-in) Tophastighed: 112+ km/t (med 2x 3s LiPo og valgfrit gearing) Sværhedsgrad: Niveau 4 Batteribakke – smal: 181 x 50 x 29/37/45 mm Batteribakke – bred: 160 x 57 x 29/37/45 mm Indhold i pakken Sledge RTR monster truck med Traxxas 2000 kV brushless motor VXL-6s vandtæt ESC med indbygget telemetri Quick Start Guide TQi 2.4 GHz radiosystem Kvalitetsværktøjssæt Jumperstik til 4s brug Du skal bruge LiPo batterier: 2x 5000 mAh 3s 11.1V anbefales. Alternativt 2x 7600 mAh 7.4V eller 1x 6700 mAh 14.8V (nedsat ydelse). NiMH ikke understøttet. LiPo oplader med iD™: Traxxas EZ-Peak® Live 4s (model #2971) anbefales. 4 x AA batterier: Til senderen.

DKK 6995.00
1

Traxxas TRX95096-4 - Sledge 1/8 Truck 6s Belted Orange

Traxxas TRX95096-4 - Sledge 1/8 Truck 6s Belted Orange

Klar til at opleve ekstrem 6s kraft? Oplev Traxxas Sledge – en 1/8 skala truggy, der hæver barren for holdbarhed, kontrol og køreglæde. Med belted Sledgehammer® dæk, et brutalt kraftfuldt drivsystem og et innovativt klipfrit karrosseri, er Sledge bygget til at dominere ethvert terræn. Designet til 6s ydeevne Sledge er den eneste truggy i sin klasse med en 6s-kompatibel drivlinje, konstrueret til maksimal holdbarhed og ydeevne. Større tandhjul, mere stål og uovertruffen kraft – dette er maskinen, der bryder alle regler. Uovertruffen chassisstyrke Det patenterede T-Bar™-chassis kombinerer en dybformet aluminiumsplade med et komposit-gittersystem – skabt til at modstå selv de hårdeste stød og hop. Klipfrit karrosseri Fjern og monter karrosseriet på få sekunder med det unikke klipfrie system – hurtigere, nemmere og mere holdbart end traditionelle body clips. Power servo med metalgear En kraftig servo med aluminiums-hus og høj drejningsmoment sikrer præcis og pålidelig styring – lige fra starten, uden opgraderinger. Velineon® VXL-6s system 2000 kV brushless motor og den avancerede VXL-6s regulator leverer ekstrem acceleration og tophastighed med avanceret tuning og køling. Belted Sledgehammer® dæk Forstærkede dæk giver maksimal kontrol, mindre udvidelse ved høje hastigheder og et bredere kontaktområde – perfekt til både off-road og asfalt. Specifikationer Længde (inkl. vinge): 604 mm Sporvidde for/bag: 459 mm Frihøjde: 50 mm Vægt (uden batteri): 5.77 kg Højde: 214 mm Akselafstand: 384 mm Støddæmperlængde (for/bag): 128 mm / 144 mm Dækstørrelse: 170 x 84 mm Fælgdiameter: 97 mm (3.8") ESC: Velineon® VXL-6s (3485) Motor: Velineon® 2000 kV Brushless Gear Ratio: 17.2 (13/52) Differentiale: Forseglet, hærdet stål, limited slip Tandhjulstype: Modul 1.0 Chassis: 3.2 mm aluminiumsplade Bremsetype: Elektronisk Drivsystem: 4WD med aksel Styresystem: Dobbelt klokkearm med metalarm Hjul & Dæk: 3.8" fælge med belted Sledgehammer® dæk Radio: TQi™ 2.4 GHz med TSM® Servo: Vandtæt 2275 metalgear (347 oz-in) Tophastighed: 112+ km/t (med 2x 3s LiPo og valgfrit gearing) Sværhedsgrad: Niveau 4 Batteribakke – smal: 181 x 50 x 29/37/45 mm Batteribakke – bred: 160 x 57 x 29/37/45 mm Indhold i pakken Sledge RTR monster truck med Traxxas 2000 kV brushless motor VXL-6s vandtæt ESC med indbygget telemetri Quick Start Guide TQi 2.4 GHz radiosystem Kvalitetsværktøjssæt Jumperstik til 4s brug Du skal bruge LiPo batterier: 2x 5000 mAh 3s 11.1V anbefales. Alternativt 2x 7600 mAh 7.4V eller 1x 6700 mAh 14.8V (nedsat ydelse). NiMH ikke understøttet. LiPo oplader med iD™: Traxxas EZ-Peak® Live 4s (model #2971) anbefales. 4 x AA batterier: Til senderen.

DKK 6995.00
1

Sullivan 654 - Starter Validus GRS Heavy Duty Sullivan

Sullivan 654 - Starter Validus GRS Heavy Duty Sullivan

Sullivan Validus GRS Professional Engine StarterThe Validus GRS is our biggest engine starter yet! Professional starter for large engines up to 350cc. It features a 3" Aluminum Nose Cone, silicone insert, and HD 6 gauge wire with standard battery post connections. Double handle grips molded to fit the shape of your hand. 1-3/4 hp provides huge starting power Stall torque is 225 inch-pounds or 3600 in-oz 4000 no load rpm Maximum current draw is 600A CCW (Normal) Engine Rotation

DKK 6127.04
1

Sbach 342 35cc 2000mm GP/EP ARF

Sbach 342 35cc 2000mm GP/EP ARF

Black Horse Sbach 342 - 27% Scale Glow and EP ALL BALSA PLYWOOD CONSTRUCTIONCOVERED WITH ORACOVERSPECIFICATION:Wingspan: 2000 mmLength: 1890mmWeight: 5.55.7kgWing area: 79.3 dm2Wing loading: 69.36g/dm2Wing type: Naca AirfoilServo mount: 42x21 mmGear type: Aluminium Hi-grade for main gear and tail gear (included)Parts listing required (not included):Radio: 6 channelsServo: 6 servos (HV High torque steel gear servo)Engine: 3335 cc gasMotor: Brushless outrunner 25003200W, 250KVPropeller: Suit with your engineRecommended Motor and Battery set up (not included):Motor: RIMFIRE 1.60LiPo cell: 12 cells 4,000-5,500 mAhReceiver battery: 6-7.4V/ 1200-2200 mAhESC: 80100A

DKK 4157.41
1

Black Horse BH183 - Albatros Turbine 1890mm Retractable Landing Gear

Black Horse BH183 - Albatros Turbine 1890mm Retractable Landing Gear

Black Horse BH190 - ALBATROS TURBINE 189cm ALL BALSA & PLYWOOD CONSTRUCTION COVERED IN A PRINTED HEAT-SHRINK FILM SPECIFICATIONS: Wingspan: 1890mm Length: 2410mm Weight: 13.8 – 14.9kg Wing area: 73.5dm2 Wing loading: 202.72g/dm2 Wing type: Naca Airfoil Servo mount: 41x21mm Gear type: Electric Retract Gear with oleo struts and controller box (included). Parts listing required (not included): Radio: 8 channels minimum Servos: 9x (HV high torque servos) size: 40x20 mm. And 1x size: 35x16mm Engine: Turbine Jet Engine with 100-140N (not included) Recommended Battery set up (not included)Receiver battery: 2S 7.4V 2200–3200mAh

DKK 13495.00
1

Fairchild 2357mm 30-35cc Gas/1.60 EP

Fairchild 2357mm 30-35cc Gas/1.60 EP

Black Horse Fairchild 30-35cc Gas or 1.60 EPGlow and EP ONLY INCLUDING OLEO STRUTSALL BALSA - PLYWOOD CONSTRUCTIONCOVERED WITH ORACOVERSPECIFICATION:Wingspan: 2357 mmLength: 1610 mmWeight: 7 kgWing area: 78.1 dm2Wing loading: 89.62 g/dm2Servo mount: 42 x 21 mmWing type: Naca AirfoilSpinner: scale type (not included)Main gear type: Oleo struts, for tail gear (included)Parts listing required (not included):Radio: 6 channels minimumServo: 8 servosEngine: 3035cc gasMotor: Brushless outrunner 2500-3200W, 250KVPropeller: Suit with your engineRecommended Motor and Battery set up (not included):Motor: RIMFIRE 1.60LiPo cell: 12S 40005500 mAhReceiver battery: 6V 12002000 mAhESC: 80-100A

DKK 4999.00
1

Extra 300 2260mm 76cc ARF

Extra 300 2260mm 76cc ARF

Black Horse BH182 - EXTRA 300 226cm 76cc Gas ARFALL BALSA PLY WOOD CONSTRUCTIONCOVERED WITH ORACOVERSPECIFICATION:Wingspan: 2260 mmLength: 2250 mmWeight: 8.5 kgWing area: 92.6 dm2Wing loading: 91.8 g/dm2Servo mount: 42x21 mmWing type: Naca AirfoilGear type: Carbon fiber for main gear (included) and aluminium Hi-grade tail gear (included)Spinner: Plastic 95mm.Covering type: Genuine oracoverParts listing required (not included):Radio: 6 channels minimumServo: 6 servos (HV High torque steel gear servo)Engine: 76cc GasPropeller: That suits with your engineRecommended EP Motor and Battery set up (not included):Motor: Brushless outrunner 50006500W, 230KV.Battery: LiPo 12 cells 5-7AhReceiver battery: 6-7.4V/ 2200-3000mAhESC: 120A

DKK 9199.00
1

Black Horse BH192 - PC-21 Pilatus 55-65cc Gas/EP 1962mm Electric retracts

Black Horse BH192 - PC-21 Pilatus 55-65cc Gas/EP 1962mm Electric retracts

Black Horse BH192 - PC-21 PILATUS 1962mm - Gas & EP ALL BALSA & PLYWOOD CONSTRUCTIONSPECIFICATIONS: Wingspan: 1962mm Length: 2312mm Weight: 11kg Wing area: 71.8 dm2 Wing loading: 153g/dm2 Wing type: Naca Airfoil Spinner: 115mm Servo mount: 42x21mm Main gear type: Electric retract gear with oleo struts (included) Nose gear type: Electric retract gear with oleo struts (included) Parts listing required (not included): Radio: 7 channels minimum Servos: 9x standard high torque servos Engine: 55-65cc Gas Propeller: Suit with your engine Recommended electric motor and battery set-up (not included): Motor: Brushless outrunner 5000 - 6500W, 180KV LiPo Battery: 12 cells 5500 - 6000mAh ESC: 120A

DKK 10217.21
1

Seagull SEA365CL - T-28 Giant Scale 2060mm wingspann ARF Grey-Yellow

Seagull SEA365CL - T-28 Giant Scale 2060mm wingspann ARF Grey-Yellow

SEAGULL 365CL - T-28 Giant Scale 2060mm spv. ARF 35-60cc Gray - yellow Specifications 1/6 Scale. Wing Span: 82.5” GIANT SCALE. Wing Area approx 1086 square inches. Length: 62”. Flying Weight: Approx 20-23 lbs. Radio: 6-12+ channels with 9+ Servos . Depending on your custom/preferred set up. (Throttle, Choke if using Gas/Glow Engine, 2-Elevator, 1-2 Rudder/Nose Steering, 2-Ailerons, 2-Flaps, 1 Speed Brake, 1 Landing Gear if Pneumatic, 2-3 Mini Servos For Gear Doors) Recommended Gas Engine: Stinger 40cc Twin with Scale T-28 Custom Mufflers or Electric Equivalent. Note: Customer may choose to use other 35cc-50cc Gas Engines but will need to shorten nose strut and move retract back to clear Engine Cylinder Head. We designed this model around the Stinger 40cc Twin Gas Engine or Electric Motors to preserve the scale gear stance and have Scale Functional Exhaust. Cowling Diameter Approx 9.25 Inches. Does not include: retractable landing gear, scale wheels, radio, engine/motor, mufflers, adhesives, pilot figures, or fuel line. Key Features Fully Built Up Balsa Wood/Aircraft Plywood/Plywood Airframe Fiberglass Cowling and trim parts of plastic and fiberglass Fully built up and fully sheeted airframe covered with iron on type covering with glossy finish Decal Set Included but not applied, allowing customer to apply preferred final markings! Sliding Canopy with Scale Cockpit Details all designed in a large removable top hatch Extra Large Removable Top Hatch allows access to fuel tank/flight batteries, radio gear and more Scale Inner and Outer 2-Piece Gear doors, Nose Gear Doors Retractable Nose and Main Gear placed in Scale Location Scale 2 piece Outer Gear doors and Inner Gear Doors Functional Servo Operated Speed Brake Included SIERRA PRECISION PNEUMATIC RETRACTS & JP ELECTRIC RETRACTS AVAILABLE! SCALE WHEEL SET WITH AND WITHOUT BRAKES AVAILABLE! SCALE PILOT FIGURES AVAILABLE WITH AND WITHOUT SERVO OPERATED MOVING HEADS SCALE FUNCTIONAL EXHAUST FOR THE RECOMMENDED STINGER 40cc TWIN GAS ENGINE AVAILABLE 100% Laser cut wooden parts Also includes: servo trays, engine mount, fuel tank, decals and all hardware. Illustrated instruction manual included. Seagulls recommended electric conversion Motor: 360Kv - 6000 Watt Propeller: 24x10 ESC: 160A - 200A Lipo: 12S

DKK 7679.00
1