44 resultater (0,22482 sekunder)

Vis alle filtre

Mærke

Butik

Pris (EUR)

Nulstil filter

Produkter
Fra
Butikker

Catchpit Chamber Set - 1050mm Diameter x 2400mm Height For 300mm Twinwall

Catchpit Chamber Set - 1050mm Diameter x 2400mm Height For 300mm Twinwall

This catchpit chamber has a diameter of 1050mm and is 2400mm deep. It features a main twinwall channel of 300mm only.Our catchpit chambers are to be used for catchment of silt and solids in surface water drainage systems. This pit will give above ground access for inspection and maintenance of systems.Part of the Accesso Blue range and manufactured by Turtle Enviro, catchpit chambers are lightweight and quick and simple to install and there is no need for machinery or heavy lifting equipment.KEY FEATURES andamp; BENEFITS OF THIS PRODUCTQuick and simple installationArrives factory assembled in one pieceDesign life of 60 yearsLightweight and requires no specialist equipment to liftCompatible with all UK pipe systemsGranular backfillAccess shafts can be easily cut onsite to required depthComplies with EN 13598-2 (2009), SfA7 and Building Regulations Part H12 x 300mm twinwall inletsTo view Turtleand#039;s installation guide for inspection chambers,andnbsp;click here.

GBP 2450.05
1

Catchpit Chamber Set - 1050mm Diameter x 1983mm Height For 300mm Twinwall

Catchpit Chamber Set - 1050mm Diameter x 1983mm Height For 300mm Twinwall

This catchpit chamber has a diameter of 1050mm and is 1983mm deep. It features a main twinwall channel of 300mm only.Our catchpit chambers are to be used for catchment of silt and solids in surface water drainage systems. This pit will give above ground access for inspection and maintenance of systems.Part of the Accesso Blue range and manufactured by Turtle Enviro, catchpit chambers are lightweight and quick and simple to install and there is no need for machinery or heavy lifting equipment.KEY FEATURES andamp; BENEFITS OF THIS PRODUCTQuick and simple installationArrives factory assembled in one pieceDesign life of 60 yearsLightweight and requires no specialist equipment to liftCompatible with all UK pipe systemsGranular backfillAccess shafts can be easily cut ibsute to required depthComplies with EN 13598-2 (2009), SfA7 and Building Regulations Part H12 x 300mm twinwall inletsTo view Turtleand#039;s installation guide for inspection chambers,andnbsp;click here.

GBP 2017.68
1

Catchpit Chamber Set - 1050mm Diameter x 1465mm Height For 300mm Twinwall

Catchpit Chamber Set - 1050mm Diameter x 1465mm Height For 300mm Twinwall

This catchpit chamber has a diameter of 1050mm and is 1465mm deep. It features a main twinwall channel of 300mm only.Our catchpit chambers are to be used for catchment of silt and solids in surface water drainage systems. This pit will give above ground access for inspection and maintenance of systems.Part of the Accesso Blue range and manufactured by Turtle Enviro, catchpit chambers are lightweight and quick and simple to install and there is no need for machinery or heavy lifting equipment.KEY FEATURES andamp; BENEFITS OF THIS PRODUCTQuick and simple installationArrives factory assembled in one pieceDesign life of 60 yearsLightweight and requires no specialist equipment to liftCompatible with most pipe systemsGranular backfillAccess shafts can be easily cut onsite to required depthComplies with EN 13598-2 (2009), SfA7 and Building Regulations Part H12 x 300mm twinwall inletsTo view Turtleand#039;s installation guide for inspection chambers,andnbsp;click here.

GBP 1729.45
1

Catchpit Chamber Set - 1050mm Diameter x 2400mm Height For 150mm andamp; 225mm Twinwall

Catchpit Chamber Set - 1050mm Diameter x 2400mm Height For 150mm andamp; 225mm Twinwall

This catchpit chamber has a diameter of 1050mm and is 2400mm deep. It features a main twinwall channel of 150mm or 225mm.Our catchpit chambers are to be used for catchment of silt and solids in surface water drainage systems. This pit will give above ground access for inspection and maintenance of systems.Part of the Accesso Blue range and manufactured by Turtle Enviro, catchpit chambers are lightweight and quick and simple to install and there is no need for machinery or heavy lifting equipment.KEY FEATURES andamp; BENEFITS OF THIS PRODUCTQuick and simple installationArrives factory assembled in one pieceDurable Rota Moulded LLDPE base - chemical and impact resistant400mm sump depthDesign life of 60 yearsLightweight and requires no specialist equipment to liftCompatible with all UK pipe systemsChambers can be installed in granular backfillComplies with EN 13598-2 (2009), SfA7 and Building Regulations Part H12 x 150mm or 225mm twinwall inletsTo find out how to install your catchpit chamber view ourandnbsp;general installation guide.

GBP 2450.05
1

Catchpit Chamber Set - 1050mm Diameter x 1983mm Height For 150mm andamp; 225mm Twinwall

Catchpit Chamber Set - 1050mm Diameter x 1983mm Height For 150mm andamp; 225mm Twinwall

This catchpit chamber has a diameter of 1050mm and is 1983mm deep. It features a 150mm or 225mm twinwall channel.Our catchpit chambers are to be used for catchment of silt and solids in surface water drainage systems. This pit will give above ground access for inspection and maintenance of systems.Part of the Accesso range and manufactured by Turtle Enviro, catchpit chambers are lightweight and quick and simple to install and there is no need for machinery or heavy lifting equipment.KEY FEATURES andamp; BENEFITS OF THIS PRODUCTQuick and simple installationArrives factory assembled in one pieceDurable Rota Moulded LLDPE base - chemical and impact resistantCompatible with all UK twinwall pipe systemsLightweight and requires no specialist equipment to liftCompatible with most pipe systems60 year design lifeChambers can be installed in granola backfill2 x 150mm or 225mm twinwall - Outlets at 0 degree and inlet at 180 degrees.To find out how to install your catchpit chamber view ourandnbsp;general installation guide.

GBP 2017.68
1

Catchpit Chamber Set - 1050mm Diameter x 1465mm Height For 150mm andamp; 225mm Twinwall

Catchpit Chamber Set - 1050mm Diameter x 1465mm Height For 150mm andamp; 225mm Twinwall

This catchpit chamber has a diameter of 1050mm and is 1465mm deep. It features a main twinwall channel of 150mm or 225mm.Our catchpit chambers are to be used for catchment of silt and solids in surface water drainage systems. This pit will give above ground access for inspection and maintenance of systems.Part of the Accesso range and manufactured by Turtle Enviro, catchpit chambers are lightweight and quick and simple to install and there is no need for machinery or heavy lifting equipment.KEY FEATURES andamp; BENEFITS OF THIS PRODUCTQuick and simple installationArrives factory assembled in one pieceDesign life of 60 yearsLightweight and requires no specialist equipment to liftCompatible with most pipe systemsGranular backfillComplies with EN 13598-2 (2009), SfA7 and Building Regulations Part H12 x 150mm or 225mm twinwall side inletsTo find out how to install your catchpit chamber view ourandnbsp;general installation guide.

GBP 1729.45
1

Inspection Chamber Set - 600mm Diameter x 1595mm Depth with 300mm Channel andamp; 225mm Inlets

Inspection Chamber Set - 600mm Diameter x 1595mm Depth with 300mm Channel andamp; 225mm Inlets

This inspection chamber has a diameter of 600mm and is 1595mm deep. It features a main twinwall channel of 300mm and an additional two 225mm inlets at 90 degrees.Our inspection chambers allow access to drain and sewer systems for testing, inspection, maintenance and cleaning. These actions can be performed from the surface and should not require entrance into the chamber itself.KEY FEATURES andamp; BENEFITS OF THIS PRODUCTQuick and simple installationArrives factory assembled in one pieceDesign life of 60 yearsLightweight and requires no specialist equipment to liftCompatible with most UK twinwall pipe systemsGranular backfillComplies with EN 13598-2 (2009), SfA7 and Building Regulations Part H12 x 250mm andamp; 2 x 225mm twinwall inletsTo view Turtleand#039;s installation guide for inspection chambers,andnbsp;click here.

GBP 898.60
1

Inspection Chamber Set - 600mm Diameter x 1965mm Depth with 150mm Channel andamp; 150mm Inlets

Inspection Chamber Set - 600mm Diameter x 1965mm Depth with 150mm Channel andamp; 150mm Inlets

This inspection chamber has a diameter of 600mm and is 1965mm deep. It features a main twinwall channel of 150mm and an additional two 150mm inlets at 90 degrees.Our inspection chambers allow access to drain and sewer systems for testing, inspection, maintenance and cleaning. These actions can be performed from the surface and should not require entrance into the chamber itself.KEY FEATURES andamp; BENEFITS OF THIS PRODUCTQuick and simple installationArrives factory assembled in one pieceDesign life of 60 yearsLightweight and requires no specialist equipment to liftCompatible with most UK twinwall pipe systemsGranular backfillComplies with EN 13598-2 (2009), SfA7 and Building Regulations Part H14 x 150mm twinwall inletsTo view Turtleand#039;s installation guide for inspection chambers, click here.

GBP 890.86
1

Catchpit Chamber Set - 450mm Diameter x 2000mm Height For 225mm Twinwall with 150mm Inlets

Catchpit Chamber Set - 450mm Diameter x 2000mm Height For 225mm Twinwall with 150mm Inlets

This catchpit chamber has a diameter of 450mm and is 2000mm deep. It features a main channel of 150mm – 225mm and an additional two 150mm inlets at 90 degrees.Our catchpit chambers are to be used for catchment of silt and solids in surface water drainage systems. This pit will give above ground access for inspection and maintenance of systems.Part of the Accesso Blue range and manufactured by Turtle Enviro, catchpit chambers are lightweight and quick and simple to install and there is no need for machinery or heavy lifting equipment.KEY FEATURES andamp; BENEFITS OF THIS PRODUCTQuick and simple installationArrives factory assembled in one pieceDesign life of 60 yearsLightweight and requires no specialist equipment to liftCompatible with most pipe systemsGranular backfillComplies with EN 13598-2 (2009), SfA7 and Building Regulations Part H12 x 150mm / 225mm twinwall inlets2 x 150mm twinwall inletsTo view Turtleand#039;s installation guide for inspection chambers,andnbsp;click here.

GBP 542.74
1

Inspection Chamber Set - 600mm Diameter x 2375mm Depth with 300mm Channel andamp; 225mm Inlets

Inspection Chamber Set - 600mm Diameter x 2375mm Depth with 300mm Channel andamp; 225mm Inlets

This inspection chamber has a diameter of 600mm and is 2375mm deep. It features a main twinwall channel of 300mm and an additional two 225mm inlets at 90 degrees.Our inspection chambers allow access to drain and sewer systems for testing, inspection, maintenance and cleaning. These actions can be performed from the surface and should not require entrance into the chamber itself.KEY FEATURES andamp; BENEFITS OF THIS PRODUCTQuick and simple installationArrives factory assembled in one pieceDesign life of 60 yearsLightweight and requires no specialist equipment to liftCompatible with most UK twinwall pipe systemsGranular backfillComplies with EN 13598-2 (2009), SfA7 and Building Regulations Part H12 x 250mm andamp; 2 x 225mm twinwall inletsTo view Turtleand#039;s installation guide for inspection chambers,andnbsp;click here.

GBP 1053.52
1

Inspection Chamber Set - 600mm Diameter x 2350mm Depth with 225mm Channel andamp; 225mm Inlets

Inspection Chamber Set - 600mm Diameter x 2350mm Depth with 225mm Channel andamp; 225mm Inlets

This inspection chamber has a diameter of 600mm and is 2350mm deep. It features a main twinwall channel of 225mm and an additional two 225mm inlets at 90 degrees.Our inspection chambers allow access to drain and sewer systems for testing, inspection, maintenance and cleaning. These actions can be performed from the surface and should not require entrance into the chamber itself.KEY FEATURES andamp; BENEFITS OF THIS PRODUCTQuick and simple installationArrives factory assembled in one pieceDesign life of 60 yearsLightweight and requires no specialist equipment to liftCompatible with most UK twinwall pipe systemsGranular backfillComplies with EN 13598-2 (2009), SfA7 and Building Regulations Part H14 x 225mm twinwall inletsTo view Turtleand#039;s installation guide for inspection chambers, click here.

GBP 1030.27
1

Inspection Chamber Set - 600mm Diameter x 1510mm Depth with 150mm Channel andamp; 150mm Inlets

Inspection Chamber Set - 600mm Diameter x 1510mm Depth with 150mm Channel andamp; 150mm Inlets

This inspection chamber has a diameter of 600mm and is 1510mm deep. It features a main twinwall channel of 150mm and an additional two 150mm inlets at 90 degrees.Our inspection chambers allow access to drain and sewer systems for testing, inspection, maintenance and cleaning. These actions can be performed from the surface and should not require entrance into the chamber itself.KEY FEATURES andamp; BENEFITS OF THIS PRODUCTQuick and simple installationArrives factory assembled in one pieceDesign life of 60 yearsLightweight and requires no specialist equipment to liftCompatible with most UK twinwall pipe systemsGranular backfillComplies with EN 13598-2 (2009), SfA7 and Building Regulations Part H14 x 150mm twinwall inletsTo view Turtleand#039;s installation guide for inspection chambers, click here.

GBP 813.38
1

Inspection Chamber Set - 600mm Diameter x 896mm Depth with 150mm Channel andamp; 150mm Inlets

Inspection Chamber Set - 600mm Diameter x 896mm Depth with 150mm Channel andamp; 150mm Inlets

This inspection chamber has a diameter of 600mm and is 990mm deep. It features a main twinwall channel of 150mm and an additional two 150mm inlets at 90 degrees.Our inspection chambers allow access to drain and sewer systems for testing, inspection, maintenance and cleaning. These actions can be performed from the surface and should not require entrance into the chamber itself.KEY FEATURES andamp; BENEFITS OF THIS PRODUCTQuick and simple installationArrives factory assembled in one pieceDesign life of 60 yearsLightweight and requires no specialist equipment to liftCompatible with most UK twinwall pipe systemsGranular backfillComplies with EN 13598-2 (2009), SfA7 and Building Regulations Part H14 x 150mm twinwall inletsTo view Turtleand#039;s installation guide for inspection chambers, click here.

GBP 658.45
1

Inspection Chamber Set - 600mm Diameter x 1930mm Depth with 225mm Channel andamp; 150mm Inlets

Inspection Chamber Set - 600mm Diameter x 1930mm Depth with 225mm Channel andamp; 150mm Inlets

This inspection chamber has a diameter of 600mm and is 1930mm deep. It features a main twinwall channel of 225mm and an additional two 150mm inlets at 60 degrees.Our inspection chambers allow access to drain and sewer systems for testing, inspection, maintenance and cleaning. These actions can be performed from the surface and should not require entrance into the chamber itself.KEY FEATURES andamp; BENEFITS OF THIS PRODUCTQuick and simple installationArrives factory assembled in one pieceDesign life of 60 yearsLightweight and requires no specialist equipment to liftCompatible with most UK twinwall pipe systemsGranular backfillComplies with EN 13598-2 (2009), SfA7 and Building Regulations Part H12 x 225mm andamp; 2 x 150mm twinwall inletsTo view Turtleand#039;s installation guide for inspection chambers,andnbsp;click here.

GBP 890.86
1

Inspection Chamber Set - 600mm Diameter x 2355mm Depth with 150mm Channel andamp; 150mm Inlets

Inspection Chamber Set - 600mm Diameter x 2355mm Depth with 150mm Channel andamp; 150mm Inlets

This inspection chamber has a diameter of 600mm and is 2355mm deep. It features a main twinwall channel of 150mm and an additional two 150mm inlets at 90 degrees.Our inspection chambers allow access to drain and sewer systems for testing, inspection, maintenance and cleaning. These actions can be performed from the surface and should not require entrance into the chamber itself.KEY FEATURES andamp; BENEFITS OF THIS PRODUCTQuick and simple installationArrives factory assembled in one pieceDesign life of 60 yearsLightweight and requires no specialist equipment to liftCompatible with most UK twinwall pipe systemsGranular backfillComplies with EN 13598-2 (2009), SfA7 and Building Regulations Part H14 x 150mm twinwall inletsTo view Turtleand#039;s installation guide for inspection chambers, click here.

GBP 968.32
1

Inspection Chamber Set - 600mm Diameter x 1960mm Depth with 160mm Channel andamp; 110mm Inlets

Inspection Chamber Set - 600mm Diameter x 1960mm Depth with 160mm Channel andamp; 110mm Inlets

This inspection chamber has a diameter of 600mm and is 1960mm deep. It features a main channel of 160mm and has additional 2 x 110mm inlets at 135 and 225, and 2 x 160mm inlets at 90 and 270.Our inspection chambers allow access to drain and sewer systems for testing, inspection, maintenance and cleaning. These actions can be performed from the surface and should not require entrance into the chamber itself. As part of Turtle Enviroand#039;s orange range, this chamber is designed for use in foul and surface water systems.KEY FEATURES andamp; BENEFITS OF THIS PRODUCTQuick and simple installation.Arrives factory assembled in one piece.Fits all 110mm drainage pipes.Lightweight and requires no specialist equipment to lift.Granular backfill.Complies with EN 13598-2 (2009).2 x 110mm inlets.2 x 160mm inlets.

GBP 650.70
1

Inspection Chamber Set - 600mm Diameter x 1115mm Depth with 300mm Channel andamp; 225mm Inlets

Inspection Chamber Set - 600mm Diameter x 1115mm Depth with 300mm Channel andamp; 225mm Inlets

This inspection chamber has a diameter of 600mm and is 1115mm deep. It features a main twinwall channel of 300mm and an additional two 225mm inlets at 90 degrees.Our inspection chambers allow access to drain and sewer systems for testing, inspection, maintenance and cleaning. These actions can be performed from the surface and should not require entrance into the chamber itself.KEY FEATURES andamp; BENEFITS OF THIS PRODUCTQuick and simple installationArrives factory assembled in one pieceDesign life of 60 yearsLightweight and requires no specialist equipment to liftCompatible with most UK twinwall pipe systemsGranular backfillComplies with EN 13598-2 (2009), SfA7 and Building Regulations Part H12 x 250mm andamp; 2 x 225mm twinwall inletsTo view Turtleand#039;s installation guide for inspection chambers,andnbsp;click here.

GBP 743.66
1

Inspection Chamber Set - 600mm Diameter x 1570mm Depth with 225mm Channel andamp; 225mm Inlets

Inspection Chamber Set - 600mm Diameter x 1570mm Depth with 225mm Channel andamp; 225mm Inlets

This inspection chamber has a diameter of 600mm and is 1570mm deep. It features a main twinwall channel of 225mm and an additional two 225mm inlets at 90 degrees.Our inspection chambers allow access to drain and sewer systems for testing, inspection, maintenance and cleaning. These actions can be performed from the surface and should not require entrance into the chamber itself.KEY FEATURES andamp; BENEFITS OF THIS PRODUCTQuick and simple installationArrives factory assembled in one pieceDesign life of 60 yearsLightweight and requires no specialist equipment to liftCompatible with most UK twinwall pipe systemsGranular backfillComplies with EN 13598-2 (2009), SfA7 and Building Regulations Part H14 x 225mm twinwall inletsTo view Turtleand#039;s installation guide for inspection chambers, click here.

GBP 875.34
1

Inspection Chamber Set - 600mm Diameter x 1500mm Depth with 110mm Channel andamp; 110mm Inlets

Inspection Chamber Set - 600mm Diameter x 1500mm Depth with 110mm Channel andamp; 110mm Inlets

This inspection chamber has a diameter of 600mm and is 1460mm deep. It features a main channel of 110mm and has an addidtional 2 x 110mm inlets at 45 degrees.Our inspection chambers allow access to drain and sewer systems for testing, inspection, maintenance and cleaning. These actions can be performed from the surface and should not require entrance into the chamber itself. As part of Turtle Enviroand#039;s orange range, this chamber is designed for use in foul and surface water systems.KEY FEATURES andamp; BENEFITS OF THIS PRODUCTQuick and simple installation.Arrives factory assembled in one piece.Fits all 110mm drainage pipes.Lightweight and requires no specialist equipment to lift.Chambers 1500mm and deeper are supplied with standard restriction capGranular backfill.Complies with EN 13598-2 (2009).4 x 110mm inlets.

GBP 550.00
1

Inspection Chamber Set - 450mm Diameter x 2384mm Depth with 150mm Channel andamp; 150mm Inlets

Inspection Chamber Set - 450mm Diameter x 2384mm Depth with 150mm Channel andamp; 150mm Inlets

This inspection chamber has a diameter of 450mm and is 2385mm deep. It features an open main channel with 150mm Twinwall Rocker Pipes, an additional two Sealed 150mm inlets ( cut as necessary ) at 90 degrees.Cover and Frame not included.andnbsp;Our inspection chambers allow access to drain and sewer systems for testing, inspection, maintenance and cleaning. These actions can be performed from the surface and should not require entrance into the chamber itself.KEY FEATURES andamp; BENEFITS OF THIS PRODUCTQuick and simple installationArrives factory assembled in one pieceDesign life of 60 yearsLightweight and requires no specialist equipment to liftCompatible with most UK twinwall pipe systemsGranular backfillComplies with EN 13598-2 (2009), SfA7 and Building Regulations Part H14 x 150mm twinwall inletsNOTE: This product is not supplied with a lid, which must be purchased separately. For this chamber, we would recommend either our 450mm square to round cover or 450mm chamber circular access cover.To view Turtleand#039;s installation guide for inspection chambers, click here.

GBP 561.62
1

Inspection Chamber Set - 600mm Diameter x 1060mm Depth with 225mm Channel andamp; 150mm Inlets

Inspection Chamber Set - 600mm Diameter x 1060mm Depth with 225mm Channel andamp; 150mm Inlets

This inspection chamber has a diameter of 600mm and is 1090mm deep. It features a main twinwall channel of 225mm and an additional two 150mm inlets at 60 degrees.Our inspection chambers allow access to drain and sewer systems for testing, inspection, maintenance and cleaning. These actions can be performed from the surface and should not require entrance into the chamber itself.KEY FEATURES andamp; BENEFITS OF THIS PRODUCTQuick and simple installationArrives factory assembled in one pieceDesign life of 60 yearsLightweight and requires no specialist equipment to liftCompatible with most UK twinwall pipe systemsGranular backfillComplies with EN 13598-2 (2009), SfA7 and Building Regulations Part H12 x 225mm andamp; 2 x 150mm twinwall inletsTo view Turtleand#039;s installation guide for inspection chambers,andnbsp;click here.

GBP 658.45
1

Inspection Chamber Set - 600mm Diameter x 1960mm Depth with 225mm Channel andamp; 225mm Inlets

Inspection Chamber Set - 600mm Diameter x 1960mm Depth with 225mm Channel andamp; 225mm Inlets

This inspection chamber has a diameter of 600mm and is 1960mm deep. It features a main twinwall channel of 225mm and an additional two 225mm inlets at 90 degrees.Our inspection chambers allow access to drain and sewer systems for testing, inspection, maintenance and cleaning. These actions can be performed from the surface and should not require entrance into the chamber itself.KEY FEATURES andamp; BENEFITS OF THIS PRODUCTQuick and simple installationArrives factory assembled in one pieceDesign life of 60 yearsLightweight and requires no specialist equipment to liftCompatible with most UK twinwall pipe systemsGranular backfillComplies with EN 13598-2 (2009), SfA7 and Building Regulations Part H14 x 225mm twinwall inletsTo view Turtleand#039;s installation guide for inspection chambers, click here.

GBP 952.82
1

Inspection Chamber Set - 600mm Diameter x 2320mm Depth with 225mm Channel andamp; 150mm Inlets

Inspection Chamber Set - 600mm Diameter x 2320mm Depth with 225mm Channel andamp; 150mm Inlets

This inspection chamber has a diameter of 600mm and is 2320mm deep. It features a main twinwall channel of 225mm and an additional two 150mm inlets at 60 degrees.Our inspection chambers allow access to drain and sewer systems for testing, inspection, maintenance and cleaning. These actions can be performed from the surface and should not require entrance into the chamber itself.KEY FEATURES andamp; BENEFITS OF THIS PRODUCTQuick and simple installationArrives factory assembled in one pieceDesign life of 60 yearsLightweight and requires no specialist equipment to liftCompatible with most UK twinwall pipe systemsGranular backfillComplies with EN 13598-2 (2009), SfA7 and Building Regulations Part H12 x 225mm andamp; 2 x 150mm twinwall inletsTo view Turtleand#039;s installation guide for inspection chambers,andnbsp;click here.

GBP 968.32
1

Catchpit Chamber Set - 450mm Diameter x 2370mm Height For 225mm Twinwall with 150mm Inlets

Catchpit Chamber Set - 450mm Diameter x 2370mm Height For 225mm Twinwall with 150mm Inlets

This catchpit chamber has a diameter of 450mm and is 2370mm deep. It features a main channel of 150mm – 225mm and an additional two 150mm inlets at 90 degrees.Our catchpit chambers are to be used for catchment of silt and solids in surface water drainage systems. This pit will give above ground access for inspection and maintenance of systems.Part of the Accesso Blue range and manufactured by Turtle Enviro, catchpit chambers are lightweight and quick and simple to install and there is no need for machinery or heavy lifting equipment.KEY FEATURES andamp; BENEFITS OF THIS PRODUCTQuick and simple installationArrives factory assembled in one pieceDesign life of 60 yearsLightweight and requires no specialist equipment to liftCompatible with most pipe systemsGranular backfillComplies with EN 13598-2 (2009), SfA7 and Building Regulations Part H12 x 150mm / 225mm twinwall inlets2 x 150mm twinwall inletsTo view Turtleand#039;s installation guide for inspection chambers,andnbsp;click here.

GBP 596.50
1

Inspection Chamber Set - 600mm Diameter x 1090mm Depth with 225mm Channel andamp; 225mm Inlets

Inspection Chamber Set - 600mm Diameter x 1090mm Depth with 225mm Channel andamp; 225mm Inlets

This inspection chamber has a diameter of 600mm and is 1090mm deep. It features a main twinwall channel of 225mm and an additional two 225mm inlets at 90 degrees.Our inspection chambers allow access to drain and sewer systems for testing, inspection, maintenance and cleaning. These actions can be performed from the surface and should not require entrance into the chamber itself.KEY FEATURES andamp; BENEFITS OF THIS PRODUCTQuick and simple installationArrives factory assembled in one pieceDesign life of 60 yearsLightweight and requires no specialist equipment to liftCompatible with most UK twinwall pipe systemsGranular backfillComplies with EN 13598-2 (2009), SfA7 and Building Regulations Part H14 x 225mm twinwall inletsTo view Turtleand#039;s installation guide for inspection chambers, click here.

GBP 720.43
1