50 resultater (0,23500 sekunder)

Vis alle filtre

Mærke

Butik

Pris (EUR)

Nulstil filter

Produkter
Fra
Butikker

RPM Light Bar Roof (4 Lights) Black (LED not included) - 80782

RPM Light Bar Roof (4 Lights) Black (LED not included) - 80782

RPM Narrow Roof-Mounted Light Bar Set - BlackQuick Notes:Fits most bodies with a minimum 100mm body widthLED?s are not includedOur first Roof-Mounted Light Bar Sets worked on all 1/8th and 1/10th scale Short Course bodies, leaving a huge gap in who could run lights on their vehicles. The RPM Narrow Roof-Mounted Light Bar Set cuts a full 2" off of the width, reducing the number of LED light canisters to four and allows virtually anyone running a vehicle with a minimum 4" body width to run LED lights on their vehicle. The list of vehicles this includes is quite extensive, including many popular sellers such as: Traxxas T-Maxx, Traxxas Revo, Traxxas 1/16th scale Mini Slash, Traxxas Rustler, Traxxas Stampede, Associated MGT, Associated T4, HPI Savage, HPI E-Firestorm, HPI E-Firestorm Flux, Losi LST/LST2, Losi XXX-T, Duratrax Evader and many, many more!The goal of our Narrow Roof-Mounted Light Bar Set was to recreate a scale version of those light bars found in full-sized racing while striving for some reasonable amount of crash-survivability. Our Light Bar Set uses a unique hinged system that in the event of a rollover, the light bar will fold against the body to help reduce impact damage. The light set is designed to bolt to the front windshield of the truck (although with sufficient room, it can be mounted to the rear window as well), keeping the profile low and in the perfect position to light up the night. Each kit comes with a pair of large backing plates that help protect the body where the screws hold the light bar in place.Each kit comes complete with all necessary mounting hardware, light canisters, molded parts and instructions. The instructions also show how to easily create your own LED light set-up with a few basic electronics skills, some tools and a little patience.We mold these light bar sets in black and chrome to match or contrast any paint and color scheme.Tech Notes: LED lights are not included. The RPM Narrow Roof-Mounted Light Bar Set can fit any number of applications. Due to the scale appearance of this light bar set, we cannot properly strengthen all aspects of the lights. Therefore, some warranty restrictions may apply. See instructions for complete details.

DKK 135.00
1

RPM Light Bar Roof (4 Lights) Chrome (LED not included) - 80783

RPM Light Bar Roof (4 Lights) Chrome (LED not included) - 80783

RPM Narrow Roof-Mounted Light Bar Set - Chromed Quick Notes: Fits most bodies with a minimum 100mm body width LED?s are not included Our first Roof-Mounted Light Bar Sets worked on all 1/8th and 1/10th scale Short Course bodies, leaving a huge gap in who could run lights on their vehicles. The RPM Narrow Roof-Mounted Light Bar Set cuts a full 2" off of the width, reducing the number of LED light canisters to four and allows virtually anyone running a vehicle with a minimum 4" body width to run LED lights on their vehicle. The list of vehicles this includes is quite extensive, including many popular sellers such as: Traxxas T-Maxx, Traxxas Revo, Traxxas 1/16th scale Mini Slash, Traxxas Rustler, Traxxas Stampede, Associated MGT, Associated T4, HPI Savage, HPI E-Firestorm, HPI E-Firestorm Flux, Losi LST/LST2, Losi XXX-T, Duratrax Evader and many, many more!The goal of our Narrow Roof-Mounted Light Bar Set was to recreate a scale version of those light bars found in full-sized racing while striving for some reasonable amount of crash-survivability. Our Light Bar Set uses a unique hinged system that in the event of a rollover, the light bar will fold against the body to help reduce impact damage. The light set is designed to bolt to the front windshield of the truck (although with sufficient room, it can be mounted to the rear window as well), keeping the profile low and in the perfect position to light up the night. Each kit comes with a pair of large backing plates that help protect the body where the screws hold the light bar in place.Each kit comes complete with all necessary mounting hardware, light canisters, molded parts and instructions. The instructions also show how to easily create your own LED light set-up with a few basic electronics skills, some tools and a little patience.We mold these light bar sets in black and chrome to match or contrast any paint and color scheme.Tech Notes: LED lights are not included. The RPM Narrow Roof-Mounted Light Bar Set can fit any number of applications. Due to the scale appearance of this light bar set, we cannot properly strengthen all aspects of the lights. Therefore, some warranty restrictions may apply. See instructions for complete details.

DKK 152.00
1

RPM 72162 - Wheelie Bar HD Arrma 6S

RPM 72162 - Wheelie Bar HD Arrma 6S

RPM 72162 - HD Wheelie Bars for ARRMA 6S Vehicles Quick Notes: Fits RPM #81802 HD Wing Mounts exclusively Ultimate wing protection Compatible with the wheels from ARRMA #320366 Wheelie Bars RPM HD Wheelie Bars for ARRMA 6S vehicles are designed to add the versatility of a wheelie bar to RPM #81802 HD Wing Mounts (sold separately). The RPM HD Wheelie Bar design bolts directly to our HD Wing Mounts exclusively. These wheelie bars add much needed wing protection during those nose high moments when your throttle finger gets a bit overzealous! Now any ARRMA 6S owner can pull some sick wheel stands without the fear of grinding the wing into dust!Do you already have a set of stock ARRMA #320366 Wheelie Bars? You have the option of using the wheels and rocker posts in that kit with RPM HD Wing Mounts. They’re cross-compatible! If you don’t have that kit, there’s no need to worry. We include a sweet set of 5 spoke wheelie bar wheels in our kit.Naturally, RPM HD Wheelie Bars for ARRMA 6S vehicles are sold with with all necessary mounting hardware. Assembly instructions are included as well. RPM HD Wheelie Bars are manufactured from our trademark blend of incredibly strong nylons. We then back our parts with a limited lifetime warranty against breakage.Tech Notes: RPM HD Wheelie Bars are designed for use with RPM #81802 HD Wing Mounts exclusively and will not work with stock or other aftermarket wing mounts. Vehicle fitment is limited to vehicles compatible with RPM #81802 HD Wing Mounts.

DKK 135.85
1

RPM Wheelie Bar (Low Visibility) X-Maxx (Only with RPM 81762) - 81582

RPM Wheelie Bar (Low Visibility) X-Maxx (Only with RPM 81762) - 81582

RPM Low Visibility Wheelie Bar for X-MaxxQuick Notes:Protection for the low hanging rear bumper of the X-MaxxWorks with RPM 81762 Rear Bumper Mounts only (sold separately)RPM Low Visibility Wheelie Bars are designed to take the stress off of the low hanging rear bumper whenever the rear end wants to drag on the ground. The wheels we designed are large enough to touch down before the rear bumper does in 99% of normal acceleration wheelies, eliminating your fears of blowing the rear bumper off of the truck or using the rear bumper as a plow.Each set of Low Visibility Wheelie Bars is made from our nearly indestructible blend of engineering grade nylons and made right here in the USA.Tech Notes: RPM Low Visibility Wheelie Bars only work with RPM 81762 Rear Bumper Mounts. They will not work with stock or any other known aftermarket rear bumper mounts.

DKK 127.00
1

RPM Rear Bumper Mount Blue Bandit, Rustler, Stampede, Slash - 80905

RPM Rear Bumper Mount Blue Bandit, Rustler, Stampede, Slash - 80905

RPM Mount for Rear Bumper or Wheelie Bar for 2WD Slash, Rustler, Stampede & Bandit - Blue Quick Notes: Fits Traxxas 2WD Slash, Rustler, Stampede & Bandit Replaces Traxxas stock 3677 After hearing numerous requests to look into the rear bumper mount on the Traxxas Slash, we found several issues that could use the RPM touch. Those same problems were encountered on e-Rustler, e-Stampede & Bandit vehicles as well, using the stock wheelie bar mount. The problem ? the stock mount uses only a single screw on the gear cover side to hold the mount in place. That causes a hinge effect under rear impacts causing the slotted area holding on to the rear skid plate to pop off after an impact, leaving the stock bumper / wheelie bar mount hanging under the chassis. The RPM solution? An all-new bumper mounting system that eliminates all of the problems encountered with the stock version.The RPM rear bumper / wheelie bar mount has two mounting holes on the gear cover side and three on the motor side ? that?s two additional mounting points to eliminate that annoying hinge effect mentioned above. The additional mounting screws help disperse impact energy into the transmission case over more surface area, reducing the possibility of damaging the case significantly! The new RPM mount design means no more slotted parts hanging below the rear skid plate ? ever! Our mount tucks up quite nicely behind the skid plate for better rear end ground clearance.Our rear bumper / wheelie bar mount fits a wide range of vehicles too. It fits all versions of the Traxxas Slash 2wd, electric Stampede, electric Rustler and Bandit including VXL, XL-5 and legacy versions.The RPM rear bumper / wheelie bar mount is molded in our nearly indestructible blend of nylons and is sold in either blue or black. Each mount comes with all necessary hardware, complete instructions for ease of installation and an industry-leading warranty to back it all up!Tech Notes: The RPM Rear Bumper Mount replaces Traxxas 3677.

DKK 84.00
1

RPM Rear Bumper Mount Black Bandit, Rustler, Stampede, Slash - 80902

RPM Rear Bumper Mount Black Bandit, Rustler, Stampede, Slash - 80902

RPM Mount for Rear Bumper or Wheelie Bar for 2WD Slash, Rustler, Stampede & Bandit - Black Quick Notes: Fits Traxxas 2WD Slash, Rustler, Stampede & Bandit Replaces Traxxas stock 3677 After hearing numerous requests to look into the rear bumper mount on the Traxxas Slash, we found several issues that could use the RPM touch. Those same problems were encountered on e-Rustler, e-Stampede & Bandit vehicles as well, using the stock wheelie bar mount. The problem ? the stock mount uses only a single screw on the gear cover side to hold the mount in place. That causes a hinge effect under rear impacts causing the slotted area holding on to the rear skid plate to pop off after an impact, leaving the stock bumper / wheelie bar mount hanging under the chassis. The RPM solution? An all-new bumper mounting system that eliminates all of the problems encountered with the stock version.The RPM rear bumper / wheelie bar mount has two mounting holes on the gear cover side and three on the motor side ? that?s two additional mounting points to eliminate that annoying hinge effect mentioned above. The additional mounting screws help disperse impact energy into the transmission case over more surface area, reducing the possibility of damaging the case significantly! The new RPM mount design means no more slotted parts hanging below the rear skid plate ? ever! Our mount tucks up quite nicely behind the skid plate for better rear end ground clearance.Our rear bumper / wheelie bar mount fits a wide range of vehicles too. It fits all versions of the Traxxas Slash 2wd, electric Stampede, electric Rustler and Bandit including VXL, XL-5 and legacy versions.The RPM rear bumper / wheelie bar mount is molded in our nearly indestructible blend of nylons and is sold in either blue or black. Each mount comes with all necessary hardware, complete instructions for ease of installation and an industry-leading warranty to back it all up!Tech Notes: The RPM Rear Bumper Mount replaces Traxxas 3677.

DKK 84.00
1

RPM Bumper Rear Black Rustler 2WD - 70812

RPM Bumper Rear Black Rustler 2WD - 70812

RPM Rear Bumper for Rustler 2WD - BlackQuick Notes:Works with or without a Wheelie Bar (not included)Compatible with Traxxas or RPM Rear Bumper Mounts (not included)Available in Black, Green, Blue or PinkNot compatible with the Nitro RustlerAre you looking for an actual rear bumper for your electric Rustler? We have you covered! Our Rustler rear bumper is designed to protect the rear of the chassis, the motor and the body, all while still allowing the use of a stock Traxxas Wheelie Bar (Traxxas 3678 ? not included). Additionally, if you decide to run without the Wheelie Bar, our rear bumper is so versatile, it?ll adapt and allow either configuration.The RPM Rear Bumper for the electric Rustler is designed tough, with serious impact absorption characteristics built in. With the use of an RPM Rear Bumper Mount (RPM 80902 or RPM 80905 ? not included), the protection for the motor becomes nearly indestructible!Each RPM Rear Bumper is made in the USA from our engineering grade nylons and is backed by our limited lifetime warranty against breakage.Tech Notes: RPM Rear Bumpers for the Traxxas Electric Rustler require a bumper mount (either a Traxxas 3677, RPM 80902 or RPM 80905 ? not included) or a Wheelie Bar (Traxxas 3678 ? not included) to install. If your version did not come with a bumper mount or wheelie bar, you will need to acquire one prior to installing. Works with most known Traxxas Rustler bodies. Aftermarket or non-standard bodies may require trimming for proper fit. Will not fit the Nitro Rustler.

DKK 101.00
1

RPM Bumper Rear Pink Rustler 2WD - 70817

RPM Bumper Rear Pink Rustler 2WD - 70817

RPM Rear Bumper for Rustler 2WD - Pink Quick Notes: Works with or without a Wheelie Bar (not included) Compatible with Traxxas or RPM Rear Bumper Mounts (not included) Available in Black, Green, Blue or Pink Not compatible with the Nitro Rustler Are you looking for an actual rear bumper for your electric Rustler? We have you covered! Our Rustler rear bumper is designed to protect the rear of the chassis, the motor and the body, all while still allowing the use of a stock Traxxas Wheelie Bar (Traxxas 3678 ? not included). Additionally, if you decide to run without the Wheelie Bar, our rear bumper is so versatile, it?ll adapt and allow either configuration.The RPM Rear Bumper for the electric Rustler is designed tough, with serious impact absorption characteristics built in. With the use of an RPM Rear Bumper Mount (RPM 80902 or RPM 80905 ? not included), the protection for the motor becomes nearly indestructible!Each RPM Rear Bumper is made in the USA from our engineering grade nylons and is backed by our limited lifetime warranty against breakage.Tech Notes: RPM Rear Bumpers for the Traxxas Electric Rustler require a bumper mount (either a Traxxas 3677, RPM 80902 or RPM 80905 ? not included) or a Wheelie Bar (Traxxas 3678 ? not included) to install. If your version did not come with a bumper mount or wheelie bar, you will need to acquire one prior to installing. Works with most known Traxxas Rustler bodies. Aftermarket or non-standard bodies may require trimming for proper fit. Will not fit the Nitro Rustler.

DKK 101.00
1

RPM Bumper Rear Green Rustler 2WD - 70814

RPM Bumper Rear Green Rustler 2WD - 70814

RPM Rear Bumper for Rustler 2WD - GreenQuick Notes:Works with or without a Wheelie Bar (not included)Compatible with Traxxas or RPM Rear Bumper Mounts (not included)Available in Black, Green, Blue or PinkNot compatible with the Nitro RustlerAre you looking for an actual rear bumper for your electric Rustler? We have you covered! Our Rustler rear bumper is designed to protect the rear of the chassis, the motor and the body, all while still allowing the use of a stock Traxxas Wheelie Bar (Traxxas 3678 ? not included). Additionally, if you decide to run without the Wheelie Bar, our rear bumper is so versatile, it?ll adapt and allow either configuration.The RPM Rear Bumper for the electric Rustler is designed tough, with serious impact absorption characteristics built in. With the use of an RPM Rear Bumper Mount (RPM 80902 or RPM 80905 ? not included), the protection for the motor becomes nearly indestructible!Each RPM Rear Bumper is made in the USA from our engineering grade nylons and is backed by our limited lifetime warranty against breakage.Tech Notes: RPM Rear Bumpers for the Traxxas Electric Rustler require a bumper mount (either a Traxxas 3677, RPM 80902 or RPM 80905 ? not included) or a Wheelie Bar (Traxxas 3678 ? not included) to install. If your version did not come with a bumper mount or wheelie bar, you will need to acquire one prior to installing. Works with most known Traxxas Rustler bodies. Aftermarket or non-standard bodies may require trimming for proper fit. Will not fit the Nitro Rustler.

DKK 101.00
1

RPM Motor Protector Black Bandit, Rustler, Stampede - 2WD - 80912

RPM Motor Protector Black Bandit, Rustler, Stampede - 2WD - 80912

RPM Motor Protector for 2WD Rustler, Stampede, Bandit & Slash* - Black Quick Notes: Transmission mounts are sold separately Fits Traxxas 2WD Bandit, Rustler & Stampede Also fits 2WD Slash - please see ?Tips? below for important information Many Traxxas electric vehicles have a motor that is dangerously exposed to impacts and damage from rear impacts or collisions. Our new rear Motor Protector eliminates that problem! How did we solve it? We started with an RPM rear bumper mount / wheelie bar mount (RPM 80902 or 80905) and extended the reach with this simple add-on piece, which completely blocks the motor from most rear impacts. A stock Traxxas rear bumper mount / wheelie bar mount ? Traxxas 3677 ? can be used with this motor protector as well.Traxxas Slash owners running in the unlimited class or those that simply want to drop a huge amount of rear end weight can eliminate the stock rear bumper and mount the RPM Motor Protector in place of the stock bumper to prevent damage to the end-bell and motor.For the ultimate in rear end protection, a second motor protector can be bolted to the opposite side of the rear bumper mount / wheelie bar mount (gear cover side) to help protect the gears and gear cover from extreme rear-end impacts.The RPM motor protector can be used on any vehicle that can run the Traxxas 3677 rear bumper mount / wheelie bar mount including the Bandit, e-Stampede, e-Rustler & Slash as well as a number of Traxxas legacy models. Our Motor Protector is molded from our ultra-durable blend of nylons and is backed by our limited lifetime warranty.Tech Notes: Images show both the motor protector and transmission mount (sold separately). To use the RPM Motor Protector in conjunction with a Slash 2wd rear bumper or Traxxas wheelie bar, please see ?Tips? below. With included hardware, it must be used in place of either the bumper or wheelie bar. A Traxxas rear bumper mount / wheelie bar mount (Traxxas 3677) or an RPM rear bumper / wheelie bar mount (RPM 80902 or 80905) must be installed prior to installing the RPM Motor Protector (not included).Slash Tips: Thanks to RPM customer Reed S. for this tip on how to use our Motor Protector in conjunction with a stock Slash 2wd rear bumper. Using the spacers shown in the photo of the parts tree below, slip the spacers in place of the stock shoulder crews that attach the stock bumper to the mount, then use 2 ? M3 x 20mm Cap Screws (not included) in place of the the RPM mounting screws that come supplied with the RPM Motor Protector.

DKK 59.00
1

RPM Bumper Rear Black Stampede 2WD - 70832

RPM Bumper Rear Black Stampede 2WD - 70832

RPM Rear Bumper for Stampede 2WD - Black Quick Notes: Works with or without a Wheelie Bar (not included) Scale rear end protection unmatched by anything else available Compatible with Traxxas or RPM Rear Bumper Mounts (not included) Integrated 5mm LED sockets for lights! (LED?s not included) Finally, a rear bumper for the Traxxas Stampede 2wd is now available that combines awesome scale looks with performance that works! Our new rear bumper is designed to protect the rear of the chassis, the motor and the body, all while still allowing the use of a stock Traxxas Wheelie Bar (Traxxas 3678 ? not included). Additionally, if you decide to run without the Wheelie Bar, our rear bumper is so versatile, it?ll adapt and allow either configuration.Our rear bumper for the Stampede 2wd consists of a scale bumper that uses design elements from many of today?s top full-scale bumper manufacturers. We start with an upper tubular shape, followed by faux stamped sheet metal filleted holes, a scale license plate area and with a final touch of a pair of scale 3? square openings for 5mm LEDs. That?s right, our bumper allows you to install your favorite 5mm LEDs (not included) to be used as taillights, reverse lights or any other use you can imagine!The RPM bumper supports are designed tough, with serious impact absorption characteristics built in. With the use of an RPM Rear Bumper Mount (RPM 80902 or 80905 ? not included), the protection for the motor becomes nearly indestructible!Each RPM Rear Bumper is made in the USA from our engineering grade nylons and is backed by our limited lifetime warranty against breakage.Tech Notes: RPM Rear Bumpers for the Traxxas Stampede 2wd require a bumper mount (either a Traxxas 3677, RPM 80902 or RPM 80905 ? not included) or a Wheelie Bar (Traxxas 3678 ? not included) to install the RPM Rear Bumper. Some body trimming may be necessary to clear the bumper supports at lower body height settings. Tested and guaranteed to work with Traxxas 3617, 3617R & 3617X bodies with minimal trimming required. Other bodies may require additional trimming beyond what is mentioned in the instructions supplied. Any standard sized, round 5mm LED?s (not included) will work with RPM bumpers.

DKK 110.00
1

RPM Skid Plate Rear Grey Slash 2WD - 81246

RPM Skid Plate Rear Grey Slash 2WD - 81246

RPM Rear Skid Plate for Slash 2WD - Grey Quick Notes: Extra screw location strengthens entire rear end of the truck Replaces the rear skid plate from Traxxas 5837 Stock rear bumper / wheelie bar mounts (Traxxas 3677) will not work with RPM skid plates ? must use RPM Bumper / Wheelie Bar Mounts Matching Front Skid Plates are also available RPM rear skid plates for the Traxxas Slash 2wd are designed to eliminate the frustration of broken skid plates and chassis. When a stock rear skid plate fails, it can rip the rear shock tower mounting screws out of the chassis, causing a catastrophic failure usually resulting in the rear end sailing in a different direction than the rest of the truck. With RPM skid plates mounted, that problem will be a thing of the past!RPM rear Slash skid plates are completely redesigned, making them stronger and much more durable. Our unique design use three chassis mounting points instead of two, triangulating the chassis mounts on the truck, in turn spreading impact energy over a larger area. This is done using a hole already located in the stock chassis, meaning no drilling is required. We also eliminated the cross-tube styling of the stock skid plates in favor of a solid flat skid design with a large radius at the transition points to allow the truck to slide over obstacles that would have normally caught on the stock rear skid plate. That means no more direct impacts to the lower rear end of the truck, which is the primary source of a broken chassis.As a final design touch, we added four thick skid rails on both the front and rear skid plates which reduce sliding friction while improving the overall durability of the skid plates and the truck. At the tail end of the rear skid plate, a skid rail runs from side to side to protect the lower transmission screw and rear bumper mount while providing a smooth transitional surface.RPM skid plates for the Traxxas Slash are sold in three color options ? black, blue and our all new gray color which is designed to blend in with the stock Traxxas gray colors of the chassis, bulkheads & transmission.Tech Notes: Stock rear bumper mounts (Traxxas 3677) will not work with RPM skid plates. To retain the use of a rear bumper or wheelie bar, RPM 80902 or 80905 must be used. RPM skid plates are designed for and only guaranteed to fit a stock Traxxas Slash chassis and chassis components.

DKK 101.00
1

RPM Nerf Bars Blue (Pair) Slash 2WD LCG - 73865

RPM Nerf Bars Blue (Pair) Slash 2WD LCG - 73865

RPM Nerf Bars for Slash 2WD LCG Chassis - BlueQuick Notes:Stock replacement for Traxxas 5833, 5833A & 5833G nerf barsSold in pairsMade in the USAHCG Nerf Bars are also availableThe chassis layout of the low center of gravity chassis (LCG) Slash 2WD is different than the original high center of gravity chassis (HCG), requiring a different nerf bar design. Our Slash 2WD LCG nerf bars fix that problem and are a direct, perfect fit!RPM Nerf Bars have added structural support to help strengthen the body and reduce impact forces transferred to the chassis. The additional cross bracing optimizes rigidity while absorbing additional impact energy anything less than RPM would have crumpled under! RPM Nerf Bars are proudly made in the USA, molded in either blue or black from our engineering grade nylons and backed with our limited lifetime warranty against breakage.Tech Notes: RPM Nerf Bars are stock replacement parts, sold in pairs and work with all stock Traxxas chassis running Traxxas 5833, 5833A & 5833G nerf bars.

DKK 76.00
1

RPM Bumper and Skidplate Front Blue Slash 2WD, Nitro Slash - 80955

RPM Bumper and Skidplate Front Blue Slash 2WD, Nitro Slash - 80955

RPM Front Bumper & Bumper Skid Plate for 2WD Slash & Nitro Slash - BlueQuick Notes:Replaces stock Traxxas 5835Optional Light Canister Set is availableOptional Roof Light Set is availableOur two-piece front bumper for the Traxxas Slash 2wd & Nitro Slash is simple, strong, effective and highly attractive. We made it a two-piece design to give the Slash 2wd owner the option of full front-end bash-proof and crash-proof protection with both the skid plate and bumper installed or if a racing profile is wanted, the front bumper can be removed and the skid plate by itself can be run as a light-weight alternative bumper / skid plate that shreds 27 grams (almost a full ounce) of weight from the front end of the truck. Once the race is over, reinstall the bumper and full bash protection is once again available!Our Traxxas Slash front bumper design completely eliminates the stock chassis-to-bumper support ring and the 5 screws holding the support ring in place. Additionally, the RPM version uses a thicker skid design (more than 60% thicker than the stock skid!) to supply the cushioning resistance a basher-proof bumper needs. Even though our thicker, more stout front bumper and skid plate is significantly stronger and more beefy than stock, it still falls in at a weight that is slightly less than the stock front bumper*. So even if the racer wants to run a full RPM front bumper and skid plate, they won?t have to worry about adding unwanted weight. To help improve overall durability, our skid rail design is wider than stock, which perfectly matches the design of our front and rear Slash skid plates.The RPM front bumper and skid plate for the Traxxas Slash is available in three color options: black on black, blue on blue or a chrome bumper on a gray skid plate. We?re so confident in the strength and durability of these new bumpers that they too come with our unbeatable factory warranty protection.*Our weight comparison is based on the weight of the stock Traxxas bumper along with the weight of the support ring and hardware (all of which is permanently removed once the RPM bumper / skid plate is installed).Suggestions: RPM light canister sets (RPM 80982 & 80983) fully integrate with our new Slash 2wd front bumper and skid plate, giving the Slash 2wd that awesome Desert Racing Truck look and open the Slash up to the addition of LED lights for nighttime fun! Don?t forget to check out our Roof-Mounted Light Bar Set too (RPM 80922, 80923 or 80925) for 6 more light canisters of night-blasting fun!

DKK 110.00
1

RPM Bumper and Skidplate Front Black Slash 2WD, Nitro Slash - 80952

RPM Bumper and Skidplate Front Black Slash 2WD, Nitro Slash - 80952

RPM Front Bumper & Bumper Skid Plate for 2WD Slash & Nitro Slash - Black Quick Notes: Replaces stock Traxxas 5835 Optional Light Canister Set is available Optional Roof Light Set is available Our two-piece front bumper for the Traxxas Slash 2wd & Nitro Slash is simple, strong, effective and highly attractive. We made it a two-piece design to give the Slash 2wd owner the option of full front-end bash-proof and crash-proof protection with both the skid plate and bumper installed or if a racing profile is wanted, the front bumper can be removed and the skid plate by itself can be run as a light-weight alternative bumper / skid plate that shreds 27 grams (almost a full ounce) of weight from the front end of the truck. Once the race is over, reinstall the bumper and full bash protection is once again available!Our Traxxas Slash front bumper design completely eliminates the stock chassis-to-bumper support ring and the 5 screws holding the support ring in place. Additionally, the RPM version uses a thicker skid design (more than 60% thicker than the stock skid!) to supply the cushioning resistance a basher-proof bumper needs. Even though our thicker, more stout front bumper and skid plate is significantly stronger and more beefy than stock, it still falls in at a weight that is slightly less than the stock front bumper*. So even if the racer wants to run a full RPM front bumper and skid plate, they won?t have to worry about adding unwanted weight. To help improve overall durability, our skid rail design is wider than stock, which perfectly matches the design of our front and rear Slash skid plates.The RPM front bumper and skid plate for the Traxxas Slash is available in three color options: black on black, blue on blue or a chrome bumper on a gray skid plate. We?re so confident in the strength and durability of these new bumpers that they too come with our unbeatable factory warranty protection.*Our weight comparison is based on the weight of the stock Traxxas bumper along with the weight of the support ring and hardware (all of which is permanently removed once the RPM bumper / skid plate is installed).Suggestions: RPM light canister sets (RPM 80982 & 80983) fully integrate with our new Slash 2wd front bumper and skid plate, giving the Slash 2wd that awesome Desert Racing Truck look and open the Slash up to the addition of LED lights for nighttime fun! Don?t forget to check out our Roof-Mounted Light Bar Set too (RPM 80922, 80923 or 80925) for 6 more light canisters of night-blasting fun!

DKK 110.00
1

RPM Bumper and Skidplate Front Chrome Slash 2WD, Nitro Slash - 80953

RPM Bumper and Skidplate Front Chrome Slash 2WD, Nitro Slash - 80953

RPM Front Bumper & Bumper Skid Plate for 2WD Slash & Nitro Slash - ChromeQuick Notes:Replaces stock Traxxas 5835Optional Light Canister Set is availableOptional Roof Light Set is availableOur two-piece front bumper for the Traxxas Slash 2wd & Nitro Slash is simple, strong, effective and highly attractive. We made it a two-piece design to give the Slash 2wd owner the option of full front-end bash-proof and crash-proof protection with both the skid plate and bumper installed or if a racing profile is wanted, the front bumper can be removed and the skid plate by itself can be run as a light-weight alternative bumper / skid plate that shreds 27 grams (almost a full ounce) of weight from the front end of the truck. Once the race is over, reinstall the bumper and full bash protection is once again available!Our Traxxas Slash front bumper design completely eliminates the stock chassis-to-bumper support ring and the 5 screws holding the support ring in place. Additionally, the RPM version uses a thicker skid design (more than 60% thicker than the stock skid!) to supply the cushioning resistance a basher-proof bumper needs. Even though our thicker, more stout front bumper and skid plate is significantly stronger and more beefy than stock, it still falls in at a weight that is slightly less than the stock front bumper*. So even if the racer wants to run a full RPM front bumper and skid plate, they won?t have to worry about adding unwanted weight. To help improve overall durability, our skid rail design is wider than stock, which perfectly matches the design of our front and rear Slash skid plates.The RPM front bumper and skid plate for the Traxxas Slash is available in three color options: black on black, blue on blue or a chrome bumper on a gray skid plate. We?re so confident in the strength and durability of these new bumpers that they too come with our unbeatable factory warranty protection.*Our weight comparison is based on the weight of the stock Traxxas bumper along with the weight of the support ring and hardware (all of which is permanently removed once the RPM bumper / skid plate is installed).Suggestions: RPM light canister sets (RPM 80982 & 80983) fully integrate with our new Slash 2wd front bumper and skid plate, giving the Slash 2wd that awesome Desert Racing Truck look and open the Slash up to the addition of LED lights for nighttime fun! Don?t forget to check out our Roof-Mounted Light Bar Set too (RPM 80922, 80923 or 80925) for 6 more light canisters of night-blasting fun!

DKK 127.00
1

RPM Bumper & Skid Plate Front HPI Baja 5B - 81972

RPM Bumper & Skid Plate Front HPI Baja 5B - 81972

RPM Front Bumper & Skid Plate for HPI Baja 5B Quick Notes: Fits the HPI Baja 5B Replaces stock HPI 85420 A lack of front-end protection of any R/C vehicle eventually results in hours of down time, replacing expensive chassis components from front-end impacts. The stock set-up on the HPI Baja 5B has virtually no protection up front since the bumper is tucked so far into the front of the vehicle. RPM steps in with some serious protection in the form of an all-new bumper specifically designed for this beast!Our front bumper is a two-piece design, utilizing a skid plate and separate bumper that can be removed for racing. Each piece has specific design elements incorporated to dramatically improve the strength and durability of the HPI Baja 5B. The RPM skid plate is attached to the chassis with four 5mm screws, not two like the stock version, effectively cutting transferred impact energy in half, divided equally among those four screws. Our skid plate also has huge skid rails all along its lower section and is a major part of the impact-absorption system. It extends up, out and away from the chassis, creating a large curved section that acts as a buffer zone that rapidly dissipates impact energy by compressing during a hit, slowing and absorbing that energy without transferring it into the more fragile components of the vehicle. Once the impact force dissipates, the memory characteristics of our trademark blend of RPM nylons will return the bumper to its original position.The bumper itself is over 6-1/2? wide and is designed to prevent smaller objects such as fence and mailbox poles from slipping in-between the skid plate and the tires. Its added width tops off a perfectly balanced design that is strong, extremely durable and built to last!

DKK 200.00
1

RPM Suspension Arms Front Right Black (Pair) E-Revo 2.0 - 81462

RPM Suspension Arms Front Right Black (Pair) E-Revo 2.0 - 81462

RPM Front Right A-arms for E-Revo 2.0 - BlackQuick Notes:5g (per pair) lighter than stockStronger than stockReplaces stock Traxxas 8631While Traxxas may have beefed up the E-Revo 2.0 suspension arms, they?re still not nearly as tough as RPM versions, nor are they as light. RPM A-arms weigh in 5 grams per side less than stock, for a total weight loss of 10 grams!RPM geometry also has its advantages. Our angled leading and trailing edges not only cut through the air cleaner and more efficiently, those same edges allow the A-arms to slip up and over tall objects with less chance of a direct impact stopping you in your tracks!RPM front A-arms for the Traxxas E-Revo 2.0 are molded from our indestructible blend of engineering grade nylons and sold as one upper and one lower A-arm. All RPM A-arms are manufactured in the USA and carry with them a limited lifetime warranty against breakage.Tech Notes: RPM 81462 & 81465 replace stock Traxxas 8631. RPM E-Revo 2.0 A-arms will not work with long travel (LT) style rockers. Upper A-arms will not work in the lower roll-center hinge pin hole.

DKK 135.00
1

RPM Suspension Arms Front Left Black (Pair) E-Revo 2.0 - 81512

RPM Suspension Arms Front Left Black (Pair) E-Revo 2.0 - 81512

RPM Front Left A-arms for E-Revo 2.0 - BlackQuick Notes:5g (per pair) lighter than stockStronger than stockReplaces stock Traxxas 8632While Traxxas may have beefed up the E-Revo 2.0 suspension arms, they?re still not nearly as tough as RPM versions, nor are they as light. RPM A-arms weigh in 5 grams per side less than stock, for a total weight loss of 10 grams!RPM geometry also has its advantages. Our angled leading and trailing edges not only cut through the air cleaner and more efficiently, those same edges allow the A-arms to slip up and over tall objects with less chance of a direct impact stopping you in your tracks!RPM front A-arms for the Traxxas E-Revo 2.0 are molded from our indestructible blend of engineering grade nylons and sold as one upper and one lower A-arm. All RPM A-arms are manufactured in the USA and carry with them a limited lifetime warranty against breakage.Tech Notes: RPM 81512 & 81515 replace stock Traxxas 8632. RPM E-Revo 2.0 A-arms will not work with long travel (LT) style rockers. Upper A-arms will not work in the lower roll-center hinge pin hole.

DKK 135.00
1

RPM Suspension Arms Front Left Blue (Pair) E-Revo 2.0 - 81515

RPM Suspension Arms Front Left Blue (Pair) E-Revo 2.0 - 81515

RPM Front Left A-arms for E-Revo 2.0 - Blue Quick Notes: 5g (per pair) lighter than stock Stronger than stock Replaces stock Traxxas 8632 While Traxxas may have beefed up the E-Revo 2.0 suspension arms, they?re still not nearly as tough as RPM versions, nor are they as light. RPM A-arms weigh in 5 grams per side less than stock, for a total weight loss of 10 grams!RPM geometry also has its advantages. Our angled leading and trailing edges not only cut through the air cleaner and more efficiently, those same edges allow the A-arms to slip up and over tall objects with less chance of a direct impact stopping you in your tracks!RPM front A-arms for the Traxxas E-Revo 2.0 are molded from our indestructible blend of engineering grade nylons and sold as one upper and one lower A-arm. All RPM A-arms are manufactured in the USA and carry with them a limited lifetime warranty against breakage.Tech Notes: RPM 81512 & 81515 replace stock Traxxas 8632. RPM E-Revo 2.0 A-arms will not work with long travel (LT) style rockers. Upper A-arms will not work in the lower roll-center hinge pin hole.

DKK 135.00
1

RPM 70780 - Mock Radiator and Fans 1/10

RPM 70780 - Mock Radiator and Fans 1/10

RPM 70780 - 1/10 scale Mock Radiator and Fans Quick Notes: Scale good looks built from RPM materials Requires a 3-1/2” x 2-1/8” (89 x 54mm) flat area of the body Requires roughly 1/4” (6.4mm) of clearance under the body RPM fans may recognize our Mock Radiator and Fans from our “No Clip” Body Mounts for the Traxxas Slash line. Scale enthusiasts loved our radiator set-up on those units but wanted the radiator and fans separately. The key components needed to add some scale realism to many 1/10 scale bodies are now available!Our 1/10 scale Radiator includes everything needed to bolt it in place on your favorite scale ride. This simple set-up will add concours winning looks to everything from your prized shelf queen to your favorite basher. Each unit is molded from our engineering grade of ridiculously tough nylons. With our materials, you know it can handle whatever you throw at it!Tech Notes:RPM Mock Radiator and Fans need a flat area of the body measuring roughly 3-1/2” x 2-1/8” (89 x 54mm) and roughly 1/4” (6.4mm) of clearance under the body for proper fitment.

DKK 101.74
1