26 resultater (0,24432 sekunder)

Vis alle filtre

Mærke

Butik

Pris (EUR)

Vis alle

Nulstil filter

Produkter
Fra
Butikker

90-deg Rotating Retract Electric TF Giant F4U Corsair

90-deg Rotating Retract Electric TF Giant F4U Corsair

Robart Top Flite Giant F4U Corsair Electric MainsThese are the Robart 148E 90 1/5 scale Electric Powered Rotating Retracts.FEATURESFits the Top Flite Giant Scale Corsair and other similar modelsAircraft steel and aluminum constructionFunctional chrome moly steel oleo struts and 1/4" axlesStatus lights added to indicate system conditionJumpers replaced by DIP switches for easier setting changesProprietary plug design eliminates improper connections2-wire design to easily change retract directionAmp-Out circuitry senses travel limits or obstructions and shuts off the motor to prevent draining batterySPECIFICATIONSTotal Length in Raised Position: 10-5/16" (270mm) (measured with 4.5" diameter wheel)Side Plate Length: 4-3/4" (121mm)Side Plate Width: 2-1/2" (63.5mm)Distance/Mounting Hole Centers Same Side: 3-3/16" (81mm)Distance/Mounting Hole Centers Opposite Side: 2-1/16" (52mm)Arc from Raised to Lowered Position: 9.3" (236mm)

DKK 4895.00
1

Retract 1/5 AT-6

Retract 1/5 AT-6

AT-6 Main Gear 1/5 Scale 5 1/4" Wheel Max. (pair).These pneumatic retracts designed exclusively for use in Ziroli, Yellow Aircraft, and Byron 1/5 scale AT-6. Aircraft steel and aluminum construction are used throughout the retract mechanism. Big 5/8 dia. struts and 7/16 dia. offset oleos make these retracts strong enough for aircraft weighing 20 to 40 lbs. Other features include positive up and down locks, Adjustable oleo strut for toe-in and toe-out, and 1/4 steel axles. Made to fit up to a 5 1/4 wheel.Robart Air Control Kit Required - Sold Separately

DKK 4895.00
1

Ziroli F9F Panther Tri-Gear set

Ziroli F9F Panther Tri-Gear set

Ziroli F9F Panther Pneumatic Tri-Gear Retract Set with RoboStruts (set).These 630 series of pneumatic retracts are designed for specfic R/C aircraft weighing up to 24 lbs. These retracts are constructed the same as the standard 630 series retracts with heat treated aluminum alloy frames and trunions, these gear are furnished with either a 7/16 or 1/2 dia. 4130 alloy steel tubular RoboStruts. They offer long dependable service for large aircraft flying off grass or paved runways. Powered by a 1/2 bore triple sealed Robart air cylinder, all of these units feature positive up and down locks.Robart Air Control Kit Required - Sold Separately

DKK 4895.00
1

654 Fixed steering nose gear

654 Fixed steering nose gear

3/8" diameter Fixed Steerable Nose Gear with Fork RoboStrut for up to 2 3/4" Wheel (each).Designed for use in model aircraft weighing 6 to 12 lbs. (2.7 - 6.5 kg), the 654 Nosegear RoboStrut comes with mounting hardware for simple installation to firewalls. Other features include functional "oleo" action struts, made of 3/8" (9.52mm) diameter aircraft steel tubing, hardened steel steering tiller arm for positive ground control and a fork yoke oleo strut sized to accept up to a 2 3/4" wheel. Easy mounting to firewall with the included glass filled nylon mount. Can be adjusted for length. Work well on the Top Flite Cessna 182.

DKK 889.00
1

Reatract Set Top Flite Bonanza/T-34

Reatract Set Top Flite Bonanza/T-34

Top Flite Bonanza / T-34 Pneumatic Tri-Gear Set (set).These 630 series of pneumatic retracts are designed for specfic R/C aircraft weighing up to 24 lbs. These retracts are constructed the same as the standard 630 series retracts with heat treated aluminum alloy frames and trunions, these gear are furnished with either a 7/16 or 1/2 dia. 4130 alloy steel tubular RoboStruts. They offer long dependable service for large aircraft flying off grass or paved runways. Powered by a 1/2 bore triple sealed Robart air cylinder, all of these units feature positive up and down locks.Robart Air Control Kit Required - Sold Separately

DKK 4199.00
1

Retracts Pica 1/5 Spitfire

Retracts Pica 1/5 Spitfire

Pica 1/5 Scale Spitfire Pneumatic Main Retracts (pair) - Robart 630PSPF.These 630 series of pneumatic retracts are designed for specfic R/C aircraft weighing up to 24 lbs. These retracts are constructed the same as the standard 630 series retracts with heat treated aluminum alloy frames and trunions, these gear are furnished with either a 7/16 or 1/2 dia. 4130 alloy steel tubular RoboStruts. They offer long dependable service for large aircraft flying off grass or paved runways. Powered by a 1/2 bore triple sealed Robart air cylinder, all of these units feature positive up and down locks. Easily adjusted for toe-in with the unique Robart split-lock trunion.Robart Air Control Kit Required - Sold Separately

DKK 2799.00
1

Right offset

Right offset

5/8" diameter RH Offset RoboStrut for a 5" - 5 1/4" Wheel (each).Robart 5/8" (15.8 mm) diameter RoboStruts are made for giant size airplanes weighing up to 55 pounds. With real functional oleos and torque links, that can be used on grass or paved airfields. Made from real aircraft grade materials, welded and heat treated components. These RoboStruts are available in straight, right or left offsets (up to a 6 dia. wheel), and a fork style oleo, easily adaptable to many different types of airplanes, and can be cut to different lengths. Primary designed to be used as fixed gear. These struts come with an anti-torque clamp style mount that allows for toe-in, toe-out adjustments. Improve your handling during takeoff and look like a pro when you land, RoboStruts give you confidence, quality, reliability, and performance.

DKK 889.00
1

Left offset

Left offset

5/8" diameter LH Offset RoboStrut for a 5" - 5 1/4" Wheel (each).Robart 5/8" (15.8 mm) diameter RoboStruts are made for giant size airplanes weighing up to 55 pounds. With real functional oleos and torque links, that can be used on grass or paved airfields. Made from real aircraft grade materials, welded and heat treated components. These RoboStruts are available in straight, right or left offsets (up to a 6 dia. wheel), and a fork style oleo, easily adaptable to many different types of airplanes, and can be cut to different lengths. Primary designed to be used as fixed gear. These struts come with an anti-torque clamp style mount that allows for toe-in, toe-out adjustments. Improve your handling during takeoff and look like a pro when you land, RoboStruts give you confidence, quality, reliability, and performance.

DKK 889.00
1

Rotating Retracts Electgric 100 deg. Large Scale (2)

Rotating Retracts Electgric 100 deg. Large Scale (2)

100 degree Large Rotating Electric Retracts (pair)These electric operated retracts are constructed from aircraft steel and aluminum components. They feature positive up-locks, functional 4130 chrome moly steel oleo struts and 1/4 inch axles. The struts rotate 90 when retracted making these retracts ideal for use in 1/5 scale models of F4U Corsair, P-40 Warhawk, F6F Hellcat and AD-1 Skyraider.(Include Robart Electric Control Unit)

DKK 7495.00
1

100 deg large scale retract

100 deg large scale retract

100 degree Large Rotating Retracts Pneumatic (pair).These pneumatically operated retracts are constructed from aircraft steel and aluminum components. They feature positive up-locks, functional steel oleo struts, triple sealed 5/8 dia. air cylinder and 1/4 inch axles. The struts rotate 90 when retracted making these retracts ideal for use in 1/5 scale models of F4U Corsair, P-40 Warhawk, F6F Hellcat and AD-1 Skyraider.Note, Robart Air Control Kit Required - Sold Separately

DKK 4895.00
1

Micro gear main

Micro gear main

1/2A Micro Main Gear Mechanical Retracts with 3/32" wire (pair).These are NON-Rotating 85 or 90 Micro Main Gear Retracts by Robart. They are Designed for Small Gas and Electric Powered Models. This Retract System is Mechanical.Weight: 0.9oz per pair (not including wheels and collars)Weight Range: Up to 907g capacityGear Leg Diameter: 3/32"Distance between mounting holes: 1-5/16" long, 11/16" wideServo Travel: 5/8"Strut Wire Diameter: 3/32"Length of Gear: 41.3 mmWidth of Gear: 22.9 mm

DKK 299.00
1

100 deg rot. retract set Byro

100 deg rot. retract set Byro

100 degree Large Rotating Retract (Byron / Iron Bay F4U Corsair) These retracts feature a scale corsair lower strut. (pair).These pneumatically operated retracts are constructed from aircraft steel and aluminum components. They feature positive up-locks, functional steel oleo struts, triple sealed 5/8 dia. air cylinder and 1/4 inch axles. The struts rotate 90 when retracted making these retracts ideal for use in 1/5 scale models of F4U Corsair, P-40 Warhawk, F6F Hellcat and AD-1 Skyraider.Note, Robart Air Control Kit Required - Sold Separately

DKK 3699.00
1

650 Robostrut 380 Straight

650 Robostrut 380 Straight

3/8" diameter Straight RoboStrut (each).Robart 3/8" (9.5 mm) diameter RoboStruts are the best replacements for wire landing gear. They are suitable for most airplanes weighing 5 to 12 pounds. With real functional oleos and torque links, they can be used on grass or paved airfields. No more bent wires! The 380 RoboStruts are available in straight, right or left offsets (up to a 3 1/4 inch {82.6 mm} dia. wheel), and a fork style oleo. All come with easy to use 5/32 inch (4 mm) and 3/16 inch (4.8 mm) dia. wire adapter bushing.

DKK 599.00
1

Straight Strut with Fork 3.25" Wheel

Straight Strut with Fork 3.25" Wheel

Robart 7/16" (11.1 mm) diameter RoboStruts are perfect replacement for weaker wire, stainless steel, and aluminum type struts. They are suitable for most airplanes weighing 12 to 18 pounds. With real functional oleos and torque links, that can be used on grass or paved airfields. Made from real aircraft grade materials, welded and heat treated components, these struts come with easy to use 3/16 inch (4.8mm) dia. wire adapter, also a split sleeve adapter to fit all popular 1/2 inch (12.7mm) socket type retract units. These RoboStruts are available in straight, right or left offsets (up to a 4 inch dia. wheel), and a fork style oleo.

DKK 549.00
1

Robostrut straight

Robostrut straight

1/2" diameter Straight RoboStrut (each).Robart 1/2" (12.7 mm) diameter RoboStruts are perfect replacement for weaker wire, stainless steel, and aluminum type struts. They are suitable for most airplanes weighing up to 26 pounds. With real functional oleos and torque links, that can be used on grass or paved airfields. Made from real aircraft grade materials, welded and heat treated components, these struts come with easy to use 1/4 inch (6.35 mm) dia. wire adapter, Designed for use in the large line of Robart landing gear, they are also the best replacement struts for all other makes of retracts that have a 1/2 (12.7 mm) strut socket type retract units.

DKK 649.00
1

Landing gear J-3 1/4

Landing gear J-3 1/4

1/4 Scale Piper Cub Landing Gear (set).For the Hangar 9 & Sig and any other 1/4 Scale Cub's with up to a 6 1/2" wide Fuselage.Scale Cub Gear, featuring real airplane construction of aircraft steel and includes mounting hardware along with plated pins & screws. This gear features functional rubber bungees, is flexible under hard landings and limits bouncing like aluminum plate gear. Included in the gear is a drilling template for ease of installation and easily adjusts to existing planes. All parts are ready for paint and covering.(Wheels Not Included)(Scale Cub Wheels are made by Dubro that are available from your local hobby dealer or mail order house)

DKK 1699.00
1

Right offset

Right offset

1/2" diameter RH Offset RoboStrut 4 1/2" - 4 3/4" Wheel (each).Robart 1/2" (12.7 mm) diameter RoboStruts are perfect replacement for weaker wire, stainless steel, and aluminum type struts. They are suitable for most airplanes weighing up to 26 pounds. With real functional oleos and torque links, that can be used on grass or paved airfields. Made from real aircraft grade materials, welded and heat treated components, these struts come with easy to use 1/4 inch (6.35 mm) dia. wire adapter, Designed for use in the large line of Robart landing gear, they are also the best replacement struts for all other makes of retracts that have a 1/2 (12.7 mm) strut socket type retract units.

DKK 785.00
1

Right offset

Right offset

1/2" diameter RH Offset RoboStrut 5" - 5 1/4" Wheel (each).Robart 1/2" (12.7 mm) diameter RoboStruts are perfect replacement for weaker wire, stainless steel, and aluminum type struts. They are suitable for most airplanes weighing up to 26 pounds. With real functional oleos and torque links, that can be used on grass or paved airfields. Made from real aircraft grade materials, welded and heat treated components, these struts come with easy to use 1/4 inch (6.35 mm) dia. wire adapter, Designed for use in the large line of Robart landing gear, they are also the best replacement struts for all other makes of retracts that have a 1/2 (12.7 mm) strut socket type retract units.

DKK 785.00
1