131 resultater (0,37966 sekunder)

Vis alle filtre

Mærke

Butik

Pris (EUR)

Nulstil filter

Produkter
Fra
Butikker

Noctua NA-SFMA1, kiinnitysadapterisarja kahdelle 120mm tuulettimelle, musta/ruskea

Noctua NA-SFMA1, kiinnitysadapterisarja kahdelle 120mm tuulettimelle, musta/ruskea

The na-sfma1 is a set of two na-fma1 fan mounting adaptors that permit the installation of the nf-a12x25 and several other noctua 120mm fans on 140mm watercooling radiators (or other screw-mount applications that are designed for 140mm fans, e.g. As a case fan). Thanks to the superior efficiency of the nf-a12x25 fan, the na-sfma1 thereby enables users to boost the performance of their 140mm radiators by replacing the stock fans with nf-a12x25s. In addition to the two adaptors, the na-sfma1 includes eight na-av4 anti-vibration mounts, which give the extra benefit of damping any minute vibrations that might otherwise be transferred to the radiator and on to the pc case.boosting 140mm radiator performance with the nf-a12x25noctua’s novel nf-a12x25 120mm fan has been thoroughly optimised for superior performance on mid to high impedance applications such as watercooling radiators and effectively outperforms many 140mm fans. The na-sfma1 thus allows the performance of 140mm-based all-in-one (aio) or custom (diy) watercooling systems to be boosted by replacing the fans with nf-a12x25s.dual pack for two fansthe na-sfma1 set includes 2 na-fma1 adaptors and 8 na-av4 anti-vibration mounts for installing two fans, thereby enabling users to set up either a single 140mm radiator in a push/pull configuration or a dual 140mm (280mm) radiator with two nf-a12x25 fans.vibration-free fan mountthe included na-av4 anti-vibration mounts damp any minute vibrations that may otherwise be transferred to the radiator and on to the pc case, which makes the na-sfma1 a great choice not only for those seeking to boost the performance of their 140mm watercoolers but also for silent enthusiasts who aim to reduce vibrations and resonances.easy installationinstalling nf-a12x25 fans on 140mm radiators using the na-fma1 is child’s play: pull the supplied anti-vibration mounts through the adaptor’s fan mounting holes, fix the adaptor to the radiator using the original screws, put the fan on the assembly and pull the tips of the anti-vibration mounts through its mounting holes – done!

EUR 12.90
1

Noctua NF-A14X25R G2 PWM SX2 PP 140mm -kotelotuuletin, 2 kpl

Noctua NF-A14X25R G2 PWM SX2 PP 140mm -kotelotuuletin, 2 kpl

Nf-a14x25r g2 pwm sx2-pp on kahden nf-a14x25r g2 pwm -pyöreäkehyksisen 140 mm:n tuulettimen sarja, joka on tarkoitettu push-pull-käyttöön jäähdytyslevyissä, kuten nh-d15(s) tai nh-u14s. Kun kaksi tuuletinta toimii push-pull-kokoonpanossa lähes samalla, vakionopeudella, niiden akustinen vuorovaikutus voi johtaa ei-toivottuihin harmonisiin ilmiöihin, kuten ajoittaiseen tärinään tai häiriöistä johtuvaan jaksoittaiseen huminaan, joka voi kuulua lyöntitaajuuksina. Tämän vuoksi sx2-pp-sarjan sisältämät kaksi nf-a14x25r g2 pwm -tuuletinta ovat hieman toisistaan poikkeavia nopeuksia (+/- ~25 rpm) tällaisten ilmiöiden välttämiseksi. Tämä hienosäätö on mahdollista tuulettimien uudenlaisen etaperf™-moottorin ja sen ne-fd6-ohjain-ic:n ansiosta, jolla saavutetaan erittäin tarkka nopeuden säätö ja joka supratorque™-ominaisuutensa ansiosta pystyy hyödyntämään ylimääräistä vääntömomenttivaraa pitääkseen yllä täsmälleen haluttua nopeutta myös silloin, kun työskentelyssä on huomattava virtausvastus, kuten jäähdytyslevyissä. Kun toinen tuuletin toimii ~25 kierrosta minuutissa hitaammin (ppa) ja toinen ~25 kierrosta minuutissa nopeammin (ppb), jäähdytyksen kokonaisteho voidaan pitää samana ja samalla estää tehokkaasti ajoittainen tärinä tai ajoittainen humina. Koska lyöntitaajuuksien havaitseminen voi vaihdella psykoakustisten mieltymysten mukaan, käyttäjät voivat helposti optimoida akustiikkaa entisestään hidastamalla ppa-tuuletinta hieman enemmän pwm-säädöllä tai mukana toimitetulla low-noise-adaptorilla, jolloin ääni on vieläkin tasaisempi lisääntyneen offsetin ansiosta.

EUR 71.90
1

Noctua NF-A14x25 G2 PWM Sx2-PP Premium -kotelotuuletin

Noctua NF-A14x25 G2 PWM Sx2-PP Premium -kotelotuuletin

The nf-a14x25 g2 pwm sx2-pp is a set of two nf-a14x25 g2 pwm square-frame 140mm fans that are offset in speed, which can be beneficial in push-pull operation as well as in situations where two fans are operating side by side, such as in case cooling applications or on 280mm water cooling radiators. When two fans are running at almost the same, constant speed in a push-pull configuration or, albeit to a lesser extent, side by side, their acoustic interaction can lead to undesirable harmonic phenomena such as intermittent vibrations or periodic humming due to interference, which can be heard as beat frequencies. Therefore, the two nf-a14x25 g2 pwm fans contained in the sx2-pp set are slightly offset in speed (+/- ~25rpm) in order to avoid such phenomena. This fine-tuning is made possible by the fans’ novel etaperf™ motor and its ne-fd6 driver ic that achieves extremely precise speed control and, thanks to its supratorque™ feature, can leverage extra torque headroom to keep the exact desired speed even when working against significant flow resistance such as on water cooling radiators and heatsinks. With one fan running ~25rpm slower (ppa) and one ~25rpm faster (ppb), the overall cooling performance can be kept the same while efficiently preventing intermittent vibrations or periodic humming. Since the perception of beat frequencies can vary depending on psychoacoustic preferences, users can easily further optimise acoustics by slowing the ppa fan down a little more through pwm control or the supplied low-noise-adaptor, which will result in an even smoother sound signature due to the increased offset.

EUR 75.90
1

Noctua NH-FK1 redux, 120mm lisätuuletinsarja NH-U12S redux -prosessorijäähdyttimeen

Noctua NH-FK1 redux, 120mm lisätuuletinsarja NH-U12S redux -prosessorijäähdyttimeen

The na-fk1 is a second fan kit for the nh-u12s redux cpu cooler. Upgrading it to a push/pull-style dual-fan setup makes it possible to further improve cooling performance or to reduce noise levels by having two fans running at lower speeds. The kit includes a second nf-p12 redux-1700 pwm fan, anti-vibration pads, fan mounting clips, a 4-pin pwm y-cable as well as two low-noise adaptors – everything you need to boost the efficiency of your nh-u12s redux!enhanced cooling performanceadding a second nf-p12 redux-1700 pwm fan to the nh-u12s redux makes it possible to further improve cooling performance by around 1-3°c, depending on the application. As a rule of thumb, the gains are bigger the higher the heat load, so the na-fk1 is particularly attractive for higher-end cpus, extensive turbo use or overclocking.lower noise levels and acoustic fine-tuningthe na-fk1 can not only be used to enhance cooling performance, but also to lower noise levels: by letting both fans run at reduced speeds, either via automatic pwm control using the supplied y-cable or via the included low-noise adaptors, the nh-u12s redux can operate more quietly while maintaining the same level of performance.nf-p12 redux-1700 pwmthe nf-p12 redux-1700 pwm fan included with the na-fk1 is the same high-quality unit that comes pre-installed on the nh-u12s redux cpu cooler, so it’s a perfect match for a push/pull-style dual-fan setup. Supporting pwm for automatic speed control, it can run near silent most of the time and provide massive performance when necessary.

EUR 21.90
1

Noctua NH-U12S DX-4189 -prosessorijäähdytin

Noctua NH-U12S DX-4189 -prosessorijäähdytin

Noctua’s dx line cpu coolers have become a default choice in premium grade quiet cooling solutions for intel xeon processors. The nh-u12s dx-4189 features a larger, custom-designed contact surface for lga4189 platforms. Based on the proven, 120mm size nh-u12s heatsink and equipped with two of noctua’s award-winning, pwm controlled nf-a12x25 120mm fans, it provides an excellent balance of performance, compatibility and quietness of operation. Topped off with the professional secufirm2™ mounting system and pre-applied nt-h1 thermal compound, the nh-u12s dx-4189 forms a complete premium quality package for quietly cooling lga4189 based xeon workstations and servers.dual nf-a12x25 pwm fansthe nh-u12s dx-4189 is equipped with two of noctua’s award-winning, next-generation nf-a12x25 120mm fans. This exquisite, state-of-the art push/pull dual fan configuration allows it to achieve a remarkable level of quiet cooling performance despite its relatively compact size.

EUR 129.90
1

Noctua NA-SAV2 chromax.red -kiinnitystarvikepakkaus tuulettimille, punainen

Noctua NA-SAV2 chromax.red -kiinnitystarvikepakkaus tuulettimille, punainen

The na-sav2 chromax.red is a fan accessory set consisting of 20 red na-av2 anti-vibration mounts for up to 5 fans. Replacing standard fan screws, the na-av2 mounts enable the convenient, quick and vibration-free installation of fans in standard mounting holes for case fans. At the same time, the chromax.red edition allows the addition of subtle red accents to noctua’s redux and industrialppc fans in order to colour-coordinate them with individual build themes.

EUR 10.90
1

Noctua NA-SAV2 chromax.blue -kiinnitystarvikepakkaus tuulettimille

Noctua NA-SAV2 chromax.blue -kiinnitystarvikepakkaus tuulettimille

The na-sav2 chromax.blue is a fan accessory set consisting of 20 blue na-av2 anti-vibration mounts for up to 5 fans. Replacing standard fan screws, the na-av2 mounts enable the convenient, quick and vibration-free installation of fans in standard mounting holes for case fans. At the same time, the chromax.blue edition allows the addition of subtle blue accents to noctua’s redux and industrialppc fans in order to colour-coordinate them with individual build themes.

EUR 12.90
1

Noctua NA-SAV2 chromax.yellow -kiinnitystarvikepakkaus tuulettimille

Noctua NA-SAV2 chromax.yellow -kiinnitystarvikepakkaus tuulettimille

The na-sav2 chromax.yellow is a fan accessory set consisting of 20 yellow na-av2 anti-vibration mounts for up to 5 fans. Replacing standard fan screws, the na-av2 mounts enable the convenient, quick and vibration-free installation of fans in standard mounting holes for case fans. At the same time, the chromax.yellow edition allows the addition of subtle yellow accents to noctua’s redux and industrialppc fans in order to colour-coordinate them with individual build themes.

EUR 11.90
1

Noctua NA-SAV2 chromax.green -kiinnitystarvikepakkaus tuulettimille

Noctua NA-SAV2 chromax.green -kiinnitystarvikepakkaus tuulettimille

The na-sav2 chromax.green is a fan accessory set consisting of 20 green na-av2 anti-vibration mounts for up to 5 fans. Replacing standard fan screws, the na-av2 mounts enable the convenient, quick and vibration-free installation of fans in standard mounting holes for case fans. At the same time, the chromax.green edition allows the addition of subtle green accents to noctua’s redux and industrialppc fans in order to colour-coordinate them with individual build themes.

EUR 12.90
1

Noctua NA-SAV2 chromax.white -kiinnitystarvikepakkaus tuulettimille, valkoinen

Noctua NA-SAV2 chromax.white -kiinnitystarvikepakkaus tuulettimille, valkoinen

The na-sav2 chromax.white is a fan accessory set consisting of 20 white na-av2 anti-vibration mounts for up to 5 fans. Replacing standard fan screws, the na-av2 mounts enable the convenient, quick and vibration-free installation of fans in standard mounting holes for case fans. At the same time, the chromax.white edition allows the addition of subtle white accents to noctua’s redux and industrialppc fans in order to colour-coordinate them with individual build themes.

EUR 10.90
1

Noctua NF-A14X25R G2 PWM 140mm -kotelotuuletin

Noctua NF-A14X25R G2 PWM 140mm -kotelotuuletin

Palkittua nf-a15-mallia seuraava nf-a14x25r g2 on noctuan seuraavan sukupolven pyöreäkehyksinen 140 mm:n lippulaivamalli, joka jatkaa palkittua nf-a15-mallia ja perustuu uraauurtavan nf-a12x25-mallin teknologisiin innovaatioihin: sterrox® lcp:stä valmistettu, erittäin optimoitu progressive-bend-juoksupyörä, jossa on wingletit, virtauksen kiihdytyskanavat ja centrifugal turbulator hub, sekä vain 0,7 mm:n kärkiväli mahdollistavat sen, että nf-a14x25r g2 parantaa entisestään edeltäjänsä tunnettua hiljaista jäähdytystehoa. Tämän ansiosta se sopii täydellisesti noctuan seuraavan sukupolven 140 mm:n luokan jäähdyttimiin, mutta se on myös erinomainen päivitys olemassa oleviin jäähdyttimen malleihin, kuten nh-d15(s) tai nh-u14s-sarjaan (sx2-pp-sarjaa suositellaan push/pull-kokoonpanoihin). 4-nastainen pwm-versio tukee täysin automaattista nopeudensäätöä pwm-tuuletinliitäntöjen kautta, ja sen mukana toimitetaan lownoise adaptor, jolla maksiminopeus voidaan laskea 1500:sta 1250 kierrokseen minuutissa. Sen erittäin vähähäviöinen etaperf™-moottori, jossa on smooth commutation drive 2 -tekniikka, ei ainoastaan tarjoa ennennäkemätöntä energiatehokkuutta ja juoksun tasaisuutta, vaan uuden supratorque™-ominaisuuden ansiosta se voi myös hyödyntää ylimääräistä vääntömomenttivaraa pitääkseen tuulettimen halutussa nopeudessa työskenneltäessä vastapainetta vastaan, mikä takaa entistäkin paremman suorituskyvyn jäähdytyslevyissä.

EUR 38.90
1

Noctua NV-FH2, 8-kanavainen tuuletinhubi 5V/12V/25V -tuulettimille, musta

Noctua NV-FH2, 8-kanavainen tuuletinhubi 5V/12V/25V -tuulettimille, musta

The nv-fh2 is a flexible, premium-quality 8 channel pwm fan hub that is ideal for powering up to eight fans in home, office or multi-purpose ventilation applications using an external power supply with 5.5mm barrel connector such as noctua’s optional nv-ps1. It’s compatible with 5, 12, and 24v fans with 4-pin pwm and 3-pin connectors and supports up to 60w total power draw. While 3-pin fans can be speed-controlled by voltage adjustment, 5 and 12v pwm fans can be controlled by connecting the optional na-fc1 controller to the nv-fh2’s 4-pin pwm input. Alternatively, the nv-fh2 can also be powered via this input (up to 22w total power draw), e.g. In pc environments where it can be run off motherboard fan headers with pwm control and rpm monitoring, or when used with noctua 5v pwm fan models that include usb power adaptor cables that make it possible to run the nv-fh2 off power banks or standard usb power supplies. Thanks to its advanced protection and signal filtering features, the nv-fh2 not only runs safely with fans that produce high starting currents or transients, but also supports cascading multiple units for controlling up to 71 fans simultaneously. Fixing the nv-fh2 is a breeze thanks to the integrated magnets that enable snap-on placement on steel surfaces, as well as the mounting tabs with screw holes that make it possible to fix it using screws or cable ties. The hub can either be run without the included clip-on cover for easy status monitoring via its white status leds or with the cover on for extra protection from dust, contact or mechanical impact. Topped off with ce, ukca and ul certifications, full compliance with all applicable safety standards as well as noctua’s 6-year manufacturer’s warranty, the nv-fh2 represents the gold standard in highly robust multi-purpose splitter boards that work just as nicely inside a pc as in other ventilation applications.5v, 12v and 24v fan supportthanks to its high quality mosfet transistors, the nv-fh2 supports 5v, 12v and 24v fans. This makes it a great choice not only for use with 12v pc case fans, but also for 5v-based home ventilation setups as well as 24v environments such as 3d printers or industrial applications.compatible with 4-pin pwm and 3-pin fanswhile only 4-pin pwm fans can be controlled via pwm, the nv-fh2’s keyed output connectors are also compatible with 3-pin fans, so it can also be used to run multiple 3-pin fans from a single power source and to adjust their speed simultaneously by reducing the input voltage.flexible power inputthe nv-fh2 can be powered either via it’s 5.5mm (outer diameter) / 2.1mm (inner diameter) barrel connector input using a power supply such as the optional nv-ps1 or via the 4-pin pwm input. If both inputs are connected, the nv-fh2 will automatically take power from the barrel connector and only use the 4-pin port for pwm control and rpm monitoring.up to 60w total power drawwhen powered via the barrel connector, the nv-fh2 can run fans with a combined power draw of up to 60w. When using the 4-pin pwm input only, the maximum power draw is limited to 22w using an auto-resetting safety fuse to protect the connector. Each output port is protected by a self-resetting 0.75a fuse.cascading support for up to 71 fansthe nv-fh2 supports cascading in the sense that up to ten nv-fh2 units can be daisy-chained in order to run and control up to 71 fans. The nv-fh2’s control circuit with single bus buffer keeps pwm signals stable without jeopardising ttl logic levels on the follower boards.controlling high-power fans safelyif both its 5.5mm barrel and 4-pin input ports are connected, the nv-fh2 will draw power via the barrel connector and use the 4-pin port only for pwm control and rpm monitoring. This way, it is possible to control fans with high power consumption safely without risking damage to the host device connected to the 4-pin port.safety fusesthe nv-fh2’s 4-pin input is protected with a 1.85a safety fuse so that the connectors specified current limit cannot be exceeded. Additionally, each fan connector is fused separately with 0.75a to prevent overcurrent on the individual outputs.inrush current protectionthe nv-fh2 features a sophisticated inrush current protection that prevents the connected fans from being damaged if a fan with high inrush current is connected or if there are transients from the power input.leds for status monitoringall fan ports of the nv-fh2 feature white status leds that light up if an rpm signal is being received and go off if the fan stops or fails. For more sophisticated watchdog functionality, the rpm signal of the fan connected to output port 1 is transmitted via the 4-pin input port and can be processed by pc motherboards or other devices such as single board computer systems (e.g. Arduino, raspberry pi, etc.).status leds with flank controlthanks to advanced flank control measures, the nv-fh2’s status leds don’t flicker and always show the correct on/off state when a fan is blocked or stopped

EUR 48.90
1

Noctua NA-SAVP1 chromax.green -kiinnitystarvikepakkaus tuulettimille

Noctua NA-SAVP1 chromax.green -kiinnitystarvikepakkaus tuulettimille

The na-savp1 chromax.green is a fan accessory set consisting of 16 green na-avp1 anti-vibration pads for up to 2 compatible 120/140mm fans (see compatibility info). Made from extra-soft silicone, the na-avp1 pads minimise the transmission of minute vibrations while maintaining full compatibility with standard fan screws and most other mounting systems. At the same time, the chromax.green edition is ideal for adding green accents to noctua’s industrialppc fans in order to colour-coordinate them with individual build themes.

EUR 12.90
1

Noctua NA-SAVP1 chromax.yellow -kiinnitystarvikepakkaus tuulettimille

Noctua NA-SAVP1 chromax.yellow -kiinnitystarvikepakkaus tuulettimille

The na-savp1 chromax.yellow is a fan accessory set consisting of 16 yellow na-avp1 anti-vibration pads for up to 2 compatible 120/140mm fans (see compatibility info). Made from extra-soft silicone, the na-avp1 pads minimise the transmission of minute vibrations while maintaining full compatibility with standard fan screws and most other mounting systems. At the same time, the chromax.yellow edition is ideal for adding yellow accents to noctua’s industrialppc fans in order to colour-coordinate them with individual build themes.

EUR 11.90
1

Noctua NA-SAVP1 chromax.white -kiinnitystarvikepakkaus tuulettimille

Noctua NA-SAVP1 chromax.white -kiinnitystarvikepakkaus tuulettimille

The na-savp1 chromax.white is a fan accessory set consisting of 16 white na-avp1 anti-vibration pads for up to 2 compatible 120/140mm fans (see compatibility info). Made from extra-soft silicone, the na-avp1 pads minimise the transmission of minute vibrations while maintaining full compatibility with standard fan screws and most other mounting systems. At the same time, the chromax.white edition is ideal for adding white accents to noctua’s industrialppc fans in order to colour-coordinate them with individual build themes.

EUR 10.90
1

Noctua NA-STPG1 -lämpötahnasuoja AM5-kannalle ja puhdistussarja

Noctua NA-STPG1 -lämpötahnasuoja AM5-kannalle ja puhdistussarja

The na-tpg1 is a simple yet highly effective means to preclude thermal paste build-up in the cut-outs of the heatspreader of amd am5 cpus. When the mounting pressure of the cooling solution is applied, excess thermal paste will be squeezed outwards. With am5 cpus, this excess paste tends to accumulate in the cut-outs at the sides of the heatspreader and may become difficult to remove. Simple and risk-free to apply, the na-tpg1 prevents this undesired phenomenon. Combined with the ten included na-cw1 cleaning wipes, the na-stpg1 set gives you everything you need to keep your am5 processor clean.

EUR 10.90
1

Noctua NA-SAV2 Anti-Vibration -kiinnikkeet

Noctua NA-SAV2 Anti-Vibration -kiinnikkeet

The na-sav2 is a fan accessory set consisting of twenty na-av2 anti-vibration mounts for up to five fans. Replacing standard fan screws, the na-av2 mounts allow for a convenient, quick and vibration-free installation of fans in standard case fan mounting holes. The double-side design makes the na-av2 easier to work with in space restricted environments and thanks to the use of premium grade rubber, these mounts are extra soft and highly tear-proof at the same time. Switching standard fan screws for na-av2 mounts can drastically reduce structure-borne noises and makes this set a perfect complement for noctua’s redux and industrialppc fans!

EUR 10.90
1

Noctua NF-S12A ULN, 120mm -kotelotuuletin, valkoinen

Noctua NF-S12A ULN, 120mm -kotelotuuletin, valkoinen

The nf-s12a marks the third generation of noctua’s signature s12 series quiet case fans, which have received more than 250 awards and recommendations from the international press. Featuring a further refined blade design with anti-stall knobs that works in tandem with the new aao (advanced acoustic optimisation) frame, the nf-s12a improves the airflow/noise efficiency of its renowned predecessor by up to 8%. The uln version provides super-slow 800/600rpm speed settings for ultra-low-noise applications and highly noise sensitive users who demand near-silent operation. Its superb running smoothness, sso2 bearing and noctua’s trusted premium quality make it an elite choice for quiet case cooling.

EUR 25.90
1

Noctua NA-SAVP1 chromax.blue -kiinnitystarvikepakkaus tuulettimille, sininen

Noctua NA-SAVP1 chromax.blue -kiinnitystarvikepakkaus tuulettimille, sininen

The na-savp1 chromax.blue is a fan accessory set consisting of 16 blue na-avp1 anti-vibration pads for up to 2 compatible 120/140mm fans (see compatibility info). Made from extra-soft silicone, the na-avp1 pads minimise the transmission of minute vibrations while maintaining full compatibility with standard fan screws and most other mounting systems. At the same time, the chromax.blue edition is ideal for adding blue accents to noctua’s industrialppc fans in order to colour-coordinate them with individual build themes.the na-avp1 anti-vibration pads are compatible with the noctua fans listed here. Please note that the na-avp1 pads cannot be used with other fans and are not compatible with third-party fans.

EUR 12.90
1

Noctua NT-H1 AM5 Edition, 3.5g -lämpötahna

Noctua NT-H1 AM5 Edition, 3.5g -lämpötahna

Noctua’s nt-h1 is a renowned hybrid thermal compound that has received more than 150 awards and recommendations from international hardware websites and magazines. Thanks to its excellent performance, exceptional ease of use and outstanding long-term stability, it has become an established favourite among overclockers and enthusiast users worldwide. Whether it’s air- or water-based cooling, cpu or gpu applications, overclocking or silent systems: nt-h1 is a proven premium paste that’s guaranteed to deliver great results. The am5 edition includes the na-tpg1 thermal paste guard that prevents thermal paste build-up in the cut-outs of the heatspreader of amd am5 cpus – a simple yet highly effective means to keep your am5 processor clean.

EUR 12.90
1

Noctua NH-U9 TR4-SP3 U-Type Premium -prosessorijäähdytin

Noctua NH-U9 TR4-SP3 U-Type Premium -prosessorijäähdytin

Having received more than 300 awards and recommendations from international hardware websites and magazines, noctua’s nh-u9 line has become a benchmark for compact 92mm single tower coolers. The tr4-sp3 version is a tailored custom model for amd’s tr4/sp3 platform (ryzen threadripper / epyc) and features a larger contact surface as well as the latest secufirm2 mounting system for socket tr4/sp3. Topped off with two of the renowned quiet nf-a9 pwm 92mm fans in a push/pull dual fan configuration, noctua’s proven nt-h1 thermal compound and a full 6-year manufacturer’s warranty, the nh-u9tr4-sp3 forms a highly compact, premium-quality solution that combines outstanding performance, superb acoustics and excellent compatibility for space-restricted tr4/sp3 systems.award-winning nh-u seriesthe nh-u9 tr4-sp3 stems from noctua's award-winning nh-u9 series. First introduced in 2005, the nh-u series has become a standard choice for premium quality quiet cpu coolers and won more than 1000 awards and recommendations from leading international hardware websites and magazines.tailored custom version for tr4/sp3 (ryzen threadripper / epyc)at 70x56mm, the copper contact surface of the tr4-sp3 version is more than double the size of the standard model. Tailored to fit the enormous integrated heat-spreaders (ihs) of amd’s tr4/sp3-based processors, this customised design allows for an optimal heat flow from the cpu over the base to the heatpipes and on to the cooling fins.compact 92mm size for best compatibilitythanks to a total width of only 95mm, the nh-u9 tr4-sp3 provides 100% pcie clearance and never overhangs the top pcie x16 slot. At the same time, its height of only 125mm allows it to fit smaller cases and most 4u size rack-mount enclosures.dual nf-a9 pwm fansthe nh-u9 tr4-sp3 is equipped with two of noctua’s award-winning nf-a9 pwm 92mm fans. This push/pull dual fan configuration allows it to achieve a level of quiet cooling performance that is remarkable for such a compact cooler and comes close to the bigger nh-u12s tr4-sp3.pwm support and low-noise adaptorsthe nf-a9 premium fans supplied with the nh-u9 tr4-sp3 support pwm for convenient automatic speed control through the motherboard. In addition, the maximum fan speed can be reduced from 2000 to 1550rpm using the supplied low-noise adaptors for even quieter operation.secufirm2 mounting system for tr4/sp3noctua’s secufirm2 mounting systems have become synonymous with quality, safety and ease of use. The tr4-sp3 variant has been completely custom-designed for the new socket and is particularly easy to install: put on the heatsink, fix the four spring-loaded screws and you’re done!nt-h1 thermal compoundnoctua's much-acclaimed nt-h1 is a well proven pro-grade tim solution that provides minimum thermal resistance, excellent ease-of-use and outstanding reliability, which makes it suitable for use in professional server and workstation environments.6-year manufacturer’s warrantynoctua products are renowned for their impeccable quality and outstanding longevity. Like all noctua fans, the supplied nf-a9’s feature an mttf rating of more than 150,000 hours and the entire nh-u9 tr4-sp3 package comes with a full 6-year manufacturer’s warranty.

EUR 92.90
1

Noctua NA-FH1 -tuuletinhubi, musta

Noctua NA-FH1 -tuuletinhubi, musta

The na-fh1 is a high-quality, smartly-protected 8 channel pwm fan hub that allows up to eight pwm fans to be run and controlled simultaneously via a single pwm motherboard fan header or stand-alone controllers such as the optional na-fc1. Non-pwm fans can be controlled by adjusting the input voltage. Supporting both 12v and 5v fans with 4-pin pwm and 3-pin connectors, the na-fh1 is highly flexible and suitable both for pc environments and other 12v- or 5v-based applications. It can be powered either via its s-ata input (for 12v fans, up to 54w) or 4-pin pwm input (for 5v and 12v fans, up to 24w), both of which are protected against overcurrent with a self-resetting fuse for maximum safety even in case of short-circuits on the connected devices or cables. The two ports can also be used concurrently with the device, automatically taking power via s-ata and exchanging rpm and pwm signals via the 4-pin interface. Status leds allow for easy monitoring and thanks to its magnetic fixture, installing the na-fh1 inside a pc case or on any other steel surface is a breeze. Topped off with ce, ukca and ul certifications, full compliance with all applicable safety standards as well as noctua’s 6-year manufacturer’s warranty, the na-fh1 is a safe, dependable premium choice for powering and controlling up to eight fans.caution: do not place directly on hard disk drives, keep at least 5cm distance. When powering via the 4-pin input from a pc motherboard, please check your motherboard manual for the maximum current of the fan header and make sure not to exceed it.up to 54w via s-ata and 24w via 4-pinwhen powered via it’s s-ata interface (for 12v fans only), the na-fh1 can run fans with a combined power draw of up to 54w. When using the 4-pin pwm input only (for 5v or 12v fans), the maximum power draw can go as high as 24w.controlling high-power fans safelyif both its s-ata and 4-pin input ports are connected, the na-fh1 will automatically draw power via s-ata and use the 4-pin port for pwm control and rpm monitoring only. This way, it is possible to control fans with high power consumption safely without risking damage to the motherboard.rpm and status monitoringthe na-fh1 transmits the rpm speed signal of the fan connected to the first port to the motherboard for speed monitoring. For additional watchdog functionality, all ports feature status leds that light up if an rpm signal is being received and go off if the fan stops or fails.compatible with 4-pin pwm and 3-pin fanswhile only 4-pin pwm fans can be controlled via pwm, the na-fh1’s keyed output connectors are also compatible with 3-pin fans, so it can also be used to run multiple 3-pin fans from a single power source and to adjust their speed simultaneously by reducing the input voltage.suitable for 12v and 5v fanssupporting both 12v and 5v (4-pin power input only) operation, the na-fh1 not only works great with 12v pc fans, but is also an elegant solution for running multiple noctua 5v fans, many of which include usb adaptor cables that can be used to connect the na-fh1 to mobile phone power supplies or power banks.ideal combination with optional na-fc1 fan controllerthe na-fh1 is ideal for controlling multiple pwm fans using the optional na-fc1 controller. Thanks to a reverse-power design on the 4-pin input of the na-fh1, the na-fc1 can control the connected fans even if the hub is powered via its s-ata interface only and if there is no other connection or input on the 4-pin interface.easy installation with magnetsthe na-fh1 features four strong neodymium magnets on the rear side, which allows it to simply snap into place on any magnetic surface such as inside steel pc cases. On non-magnetic surfaces such as aluminum pc cases, the flat rear side of the device makes it possible to easily fix it with double-sided tape or velcro tape.30cm input cable includedthe na-fh1 is shipped with a 30cm na-ec1 input cable to connect it to motherboard pwm fan headers. For applications that require further extending the input cable or extending the output cables to the fans, noctua offers the na-sec1 (30cm) and na-sec3 (60cm) cable sets.overcurrent and short-circuit protection with safety fusesespecially when drawing power from a pc power supply via s-ata connectors, short-circuits on the connected cables or devices can cause hazardous situations such as cable fires. For extra safety, the na-fh1 has auto-resetting fuses both on the s-ata and on the 4-pin input so that it can automatically shut down in case of overcurrent or short-circuits on one of the connected devices or cables.safety certificationsunlike many cheap fan hubs, the na-fh1 has been carefully tested for product safety and emc compliance. Carrying ce, ukca and ul certifications and meeting all applicable standards (en 62368-1, en 55035, en 55032, ul-507), it is a safe, quality device through and through.6-year manufacturer’s warrantynoctua products are renowned for their impeccable quality and outstanding longevity. Li

EUR 37.90
1

Noctua NA-SYC1 chromax.white Y -kaapelisarja, valkoinen/musta

Noctua NA-SYC1 chromax.white Y -kaapelisarja, valkoinen/musta

The na-syc1 chromax.white is a fan accessory set consisting of three na-yc1 y-cables that make it possible to run two 4-pin pwm fans on a single fan header and to let the motherboard control the speed of both fans simultaneously. Multiple na-yc1s can be daisy-chained to control more than two pwm fans via one header. The na-yc1’s 4-pin connectors are compatible with both 3-pin and 4-pin pwm fans, but pwm control is only supported with 4-pin fans. Thanks to the white sleeving, the cables are ideal for creating pc builds with neat, focused aesthetics and are a perfect match for noctua’s chromax edition fans.common mainboard fan headers support up to 9.6 or 12w (check your mainboard manual for detailed information). Please thus make sure that the combined power draw of the fans connected to one fan header using na-yc1 adaptors does not exceed this value!

EUR 12.90
1

Noctua NA-SYC1 chromax.black Y -kaapelisarja, musta

Noctua NA-SYC1 chromax.black Y -kaapelisarja, musta

The na-syc1 chromax.black is a fan accessory set consisting of three na-yc1 y-cables that make it possible to run two 4-pin pwm fans on a single fan header and to let the motherboard control the speed of both fans simultaneously. Multiple na-yc1s can be daisy-chained to control more than two pwm fans via one header. The na-yc1’s 4-pin connectors are compatible with both 3-pin and 4-pin pwm fans, but pwm control is only supported with 4-pin fans. Thanks to the black sleeving, the cables are ideal for creating pc builds with neat, focused aesthetics and are a perfect match for noctua’s chromax edition fans.common mainboard fan headers support up to 9.6 or 12w (check your mainboard manual for detailed information). Please thus make sure that the combined power draw of the fans connected to one fan header using na-yc1 adaptors does not exceed this value!

EUR 12.90
1