71 resultater (0,32217 sekunder)

Mærke

Butik

Pris (EUR)

Nulstil filter

Produkter
Fra
Butikker

Lian Li LANCOOL 216 - miditornikotelo, Läpinäkyvä, Valkoinen

Lian Li LANCOOL 216 - miditornikotelo, Läpinäkyvä, Valkoinen

Lancool 216airflow focusthe lancool 216 is a mainstream case that features all-around mesh panels for optimal airflow. Thanks to its modular rear panel, it can be optimized for air cooling or water cooling. It includes 2 x 160mm and 1 x 140mm pre-installed pwm fans and an innovative rear pcie fan bracket to maximize airflow.top meshto ensure adequate airflow is provided to the system, the lancool 216 features mesh at the front, top, and on the psu shroud’s side*. The front mesh extends to the top for a continuous mesh panel.lancool 216 rgb fansthe included 160mm argb fans feature two channels of leds (one on the outer rim of the fan, another at the shaft of the fan blades) that can be controlled separately via an optional accessory, or via the motherboard lighting software by connecting them directly to a motherboard 5v 3pin header.air cooling mode / water cooling modethe modular motherboard i/o allow users to move the motherboard to a higher position which is more favorable for air-cooled systems, or a lower position for water-cooled systems.air coolingset higher, the motherboard leaves room above the psu shroud for wider fans.water coolingset lower, the motherboard leaves a 63mm thick gap at the top to install radiator/fan combos, ideal for aios or custom water cooling.front i/o can be relocatedincluding a power button, reset button, audio port, 2x usb3.0 ports, and a usb type c port, the front i/o module can be relocated to the lower left side of the front panel.hardware compatibilitythe lancool 216 supports atx, micro-atx, mini-itx motherboards, and e-atx under 280mm in width (when the grommet bar is flipped 180°). In addition, thanks to its symmetrical design, cable management in the 2nd chamber remains unaffected.latest gen. Gpu readywith enough room for graphics cards up to 392mm in length, and 180mm in height (for air cooling mode), the lancool 216 is compatible with even the largest nvidia 4000 series cards.pressure leak freepre-installed at the front of the top radiator bracket, a seal plate ensures no pressure leak is created when installing smaller than a 360 radiator/3x120mm fans at the top.removeable top radiator bracketthe top mounting bracket can be completely removed from the case for easier hardware installation. The bracket comes off with the left side frame bar to provide optimal clearance. Two grooves have been implemented to allow easy passage of fan cables into the second chamber of the case, simplifying cable management and making the overall look of the build better.pcie fan bracketthe gpu placed at the top of the expansion slots in air cooling mode opens up the possibility to add a 120mm fan at the rear of the case without obstructing the gpu i/o. This is also possible with a vertically mounted gpu in both air-cooled and water-cooled mode. The additional 120mm fan provides better cooling for the gpu and a greater intake/exhaust balance for the system.vertical gpu compatiblethe pcie expansion slot panel can be rotated to vertically install the gpus, only an additional riser cable is required.cable managementthe lancool 216 offers multiple options for easy cable management. Along the cable grommet bar, 3 large velcro straps can hold 2 different sets of cables. 3 small clips are located along the rear side panel, ideal for cleanly routing the cpu 8pin cable, and 2 additional velcro straps are located near the psu chamber to help hold down the extra psu cable length away from the ventilation path in the bottom chamber.

EUR 114.90
1

Lian Li O11D Mini-S - Mini-tornikotelo, ikkunalla, Valkoinen

Lian Li O11D Mini-S - Mini-tornikotelo, ikkunalla, Valkoinen

Think big. Build small.o11d mini adding to the o11 dynamic series, the classic and mordern looking. A case that would accommodate the maximum number of water-cooling configurations without being oversized. With a modular back panel design, the user has the option to choose from 3 slots/ 5 slots/ 7 slots i/o shield to optimize the case to the configuration of user’s choice. Supports mini-itx, micro-atx, atx, and e-atx motherboard sizes. And up to 9 fans to cool the chassis.configuration of your choicemodular back paneldecide how many expansion slots you need. Calculate the size of your fans & accessories.pick your motherboard type. 3 kinds of back panels to meet your demand!side radiator configuration with long gputhe 30mm space behind the side fan / radiator bracket allows users to mount fans, thus efficiently intake fresh air to directly cool the radiator and leaves enough space to install long gpus in this compact case.flat pump standideal for mounting the pump directy at the bottom of the case.elevated pump standmounting the pump next to the 240/280mm radiator.easily match interface.floating pump standmounting above a 120mm fan on a radiator.easily match interface.a series of o11 dynamicas a member of the o11 family,the o11d mini is designed to support a maximum number of radiators to optimize the water-cooling potential,and this even with a smaller frame.dual-chamber design for cable managementcarried from the design of the o11d series, cables quickly pass to the second chamber through rubber grommets. Multiple tie points and velcro strap channels are provided to tidy up the cables while the ssd mounting bar helps keep the loose cables all snuggled up to ensure a clean look and prevent the right-side panel from not closing or bulging.complete dust protectionall 3 ventilation intake sides are equippedwith magnetic dust filters and a removable dust trayto prevent the dust from entering the case.optional accessoryo11d mini vertical gpu kitsthe vertical gpu enabled back panel can be adjusted up and down for clearance of the fans and radiator at the bottom of the case.

EUR 128.90
1

Lian Li O11 Vision Compact -miditornikotelo, musta

Lian Li O11 Vision Compact -miditornikotelo, musta

In collaboration with pcmrthe o11 vision compact is a collaboration with pc master race (pcmr), which is a smaller iteration of the original o11 vision.with a customizable mesh top panel and support for back-connect atx motherboards, this case is designed for ultimate flexibility.the main tenet of pcmr is freedom and customization, and the o11 vision compact enables it, by allowing the user to build the ultimate battlestation, tailored to their individual preferences.enjoy enhanced stability with the removable gpu bracket and experience concealing cable management for the cleanest look. The unobstructed view for the optimal showcasing of the components without clutter sets a new benchmark in diy aesthetics.the o11 vision compact embodies the spirit of lian li and pcmr, providing pc enthusiasts the opportunity to create their finest masterpiece.size comparisonthe size of the o11 vision compact is based on the original from the o11 dynamic. Its volume has been reduced from 67.8 l (o11 vision) to 57.4 l, (o11 vision compact) making it 10.4 l more compact.unobstructed hardware showcaseo11 vision compact enhances your setup with its unique swappable top panels and concealed aio tubing design, giving your chassis a standout and elegant look.two colorsthis chassis comes in two colors: black and white. Black version features a tinted glass panel, while the white version comes with clear tempered glass panels along with matching grommets, thumb screws, and brackets.brushed aluminiun finishinner corner silkscreenswappable mesh/glass panels3mm top tempered glass4mm tinted side and front tempered glassaluminum with white powder coatingouter corner white silkscreenswappable mesh/glass panels3mm top tempered glass4mm clear side and front tempered glassextreme versatility – vision or mesho11 vision compact offers two different top panel options: a mesh panel designed for top aio installation, and a tempered glass panel that allows for 270-degree side visibility, showcasing your components beautifully.sturdy support structurethe glass panels meet at the top left corner at a mounting key that provides alignment and magnetic support to the glass panels. The mounting key is hidden behind a triangular silk screen, with the white version being an elegant gradient white and grey. The mounting key used is rated for 35 kg of force to ensure a strong support.three-sided glass mode: showcase your stylethe space above the motherboard can be used to install monitor accessories. There’s also an opening at the back to allow the monitor’s cable to be easily routed to the motherboard’s back io. Additionally, the aio tubing can be concealed in the second chamber, while the support for back-connect motherboards ensures a clean and beautiful layout in the main chamber.the chasis supports up to a maximum of 14 fans (mesh mode push-pull set up) and up to 360mm radiator, ensuring excellent ventilation and cooling while maintaining a tidy appearance even with loads of component.concealed cables: simple and elegantbeside the rear pass-through grommet, an atx eps cover provides a clean btf look. Long vertical grommets run the right side of the motherboard. The large top grommet can pass a cpu pump block, and can be removed/re-inserted for maximum clearance. Detaching the cable cover, aio tubes slide into provided channels for a cleaner look.powerful cooling compatibilitymesh modesupports up to 11x120mm fans, or 2x140mm and 8x120mm fansvision modesupports up to 8x120mm fansimprove intake with reversible bracketthe side radiator bracket can be removed for easy radiator and fan installation. Remove the thumbscrew on the right-side interior, and the bracket can be removed. The bracket can also be reversely installed for different setup configurations.pre-installed gpu anti-sag bracketthe o11 vision compact features a built-in removable gpu anti-sag bracket that holds gpu ranging from 278mm to 408mm.the height is adjustable by turning the thumbscrew behind the motherboard tray to secure it.easy access for dust filtersthe bottom of the o11 vision compact is equipped with a full-length dust filter that pull out from the left side. There are four magnets that attach the filter tight against the frame.front i/othe power button features a white backlight to indicate the power status. The front i/o ports are located at the foot design, offering a variety of connections for convenience.high storage capacitythe removable cable management bar is secured by magnetic latches. Supports up to 2×2.5″ ssds and can also accommodate a fan or argb hub.drive cage2 x 2.5″ ssd or 2 x 3.5″ hdd. Each drive cage is independently removable, freeing up space for cable management.easy cable managementlike the o11 vision, the o11 vision compact also comes with 2 dual-layer cable clips that slide out of their ssd-style mounting points. The clip can hold the bulk of psu cables, while the velcro strap on top is ideal for fan cable management. 6 additional velcro straps, 2 above and

EUR 143.90
1

Lian Li LANCOOL 216R-X - miditornikotelo, Musta

Lian Li LANCOOL 216R-X - miditornikotelo, Musta

Airflow focusthe lancool 216 is a mainstream case that features all-around mesh panels for optimal airflow. Thanks to its modular rear panel, it can be optimized for air cooling or water cooling. It includes 2 x 160mm and 1 x 140mm pre-installed pwm fans and an innovative rear pcie fan bracket to maximize airflow.continuous front to top meshto ensure adequate airflow is provided to the system, the lancool 216 features mesh at the front, top, and on the psu shroud’s side. The front mesh extends to the top for a continuous mesh panel.lancool 216 rgb fansthe included 160mm argb fans feature two channels of leds (one on the outer rim of the fan, another at the shaft of the fan blades) that can be controlled separately via an optional accessory, or via the motherboard lighting software by connecting them directly to a motherboard 5v 3pin header.located in the second chamber behind the motherboard, a sata-powered fan hub can support up to 4x argb and pwm fans.air cooling mode / water cooling modethe modular motherboard i/o allow users to move the motherboard to a higher position which is more favorable for air-cooled systems, or a lower position for water-cooled systems.air coolingset higher, the motherboard leaves room above the psu shroud for wider fans.water coolingset lower, the motherboard leaves a 63mm thick gap at the top to install radiator/fan combos, ideal for aios or custom water cooling.front i/o can be relocatedincluding a power button, reset button, audio port, 2x usb3.0 ports, and a usb type c port, the front i/o module can be relocated to the lower left side of the front panel.hardware compatibilitythe lancool 216 supports atx, micro-atx, mini-itx motherboards, and e-atx under 280mm in width (when the grommet bar is flipped 180°). In addition, thanks to its symmetrical design, cable management in the 2nd chamber remains unaffected.latest gen. Gpu readywith enough room for graphics cards up to 392mm in length, and 180mm in height (for air cooling mode), the lancool 216 is compatible with even the largest nvidia 4000 series cards.pressure leak freepre-installed at the front of the top radiator bracket, a seal plate ensures no pressure leak is created when installing smaller than a 360 radiator/3x120mm fans at the top.removeable top radiator bracketthe top mounting bracket can be completely removed from the case for easier hardware installation. The bracket comes off with the left side frame bar to provide optimal clearance.two grooves have been implemented to allow easy passage of fan cables into the second chamber of the case, simplifying cable management and making the overall look of the build better.pcie fan bracketthe gpu placed at the top of the expansion slots in air cooling mode opens up the possibility to add a 120mm fan at the rear of the case without obstructing the gpu i/o. This is also possible with a vertically mounted gpu in both air-cooled and water-cooled mode. The additional 120mm fan provides better cooling for the gpu and a greater intake/exhaust balance for the system.vertical gpu compatiblethe pcie expansion slot panel can be rotated to vertically install the gpus, only an additional riser cable is required.up to 6 x ssd + 2 x hdd storage capacitya total of 2 x 3.5” + 6 x 2.5” drives can be installed with dedicated mounts for storage.cable managementthe lancool 216 offers multiple options for easy cable management. Along the cable grommet bar, 3 large velcro straps can hold 2 different sets of cables. 3 small clips are located along the rear side panel, ideal for cleanly routing the cpu 8pin cable, and 2 additional velcro straps are located near the psu chamber to help hold down the extra psu cable length away from the ventilation path in the bottom chamber.argb control & usb modulean additional argb control & usb module can be installed at the side of the front panel to provide better control over the front argb fans. The argb control & usb module offers the option to create custom lighting styles by mixing the light effects of both led channels individually.dust filterfor users who take dust management to the next level, a magnetic front panel dust filter is available as an optional accessory. The dust filter fits perfectly between the front panel and the front fans.pcie cablefor vertical gpu mounting, only an additional riser cable is required. With a pcb that has a hole spacing of 112.7mm, the lian-li pcie 4.0 x16 riser cable is compatible with the lancool 216.

EUR 129.90
1

Lian Li Lancool 216-X - miditornikotelo, Musta

Lian Li Lancool 216-X - miditornikotelo, Musta

Lancool 216airflow focusthe lancool 216 is a mainstream case that features all-around mesh panels for optimal airflow. Thanks to its modular rear panel, it can be optimized for air cooling or water cooling. It includes 2 x 160mm and 1 x 140mm pre-installed pwm fans and an innovative rear pcie fan bracket to maximize airflow.continuous front to top meshto ensure adequate airflow is provided to the system, the lancool 216 features mesh at the front, top, and on the psu shroud’s side*. The front mesh extends to the top for a continuous mesh pane2 x 160mm front fansand 1 x 140mm rear fan includedlancool 216rgb fansthe included 160mm argb fans feature two channels of leds (one on the outer rim of the fan, another at the shaft of the fan blades) that can be controlled separately via an optional accessory, or via the motherboard lighting software by connecting them directly to a motherboard 5v 3pin header.located in the second chamber behind the motherboard, a sata-powered fan hub can support up to 4x argb and pwm fans.air cooling mode / water cooling modethe modular motherboard i/o allow users to move the motherboard to a higher position which is more favorable for air-cooled systems, or a lower position for water-cooled systems.air coolingset higher, the motherboard leaves room above the psu shroud for wider fans.water coolingset lower, the motherboard leaves a 63mm thick gap at the top to install radiator/fan combos, ideal for aios or custom water cooling.front i/o can be relocatedincluding a power button, reset button, audio port, 2x usb3.0 ports, and a usb type c port, the front i/o module can be relocated to the lower left side of the front panel.hardware compatibilitythe lancool 216 supports atx, micro-atx, mini-itx motherboards, and e-atx under 280mm in width (when the grommet bar is flipped 180°). In addition, thanks to its symmetrical design, cable management in the 2nd chamber remains unaffected.latest gen. Gpu readywith enough room for graphics cards up to 392mm in length, and 180mm in height (for air cooling mode), the lancool 216 is compatible with even the largest nvidia 4000 series cards.pressure leak freepre-installed at the front of the top radiator bracket, a seal plate ensures no pressure leak is created when installing smaller than a 360 radiator/3x120mm fans at the top.removeable top radiator bracketthe top mounting bracket can be completely removed from the case for easier hardware installation. The bracket comes off with the left side frame bar to provide optimal clearance. Two grooves have been implemented to allow easy passage of fan cables into the second chamber of the case, simplifying cable management and making the overall look of the build better.pcie fan bracketthe gpu placed at the top of the expansion slots in air cooling mode opens up the possibility to add a 120mm fan at the rear of the case without obstructing the gpu i/o. This is also possible with a vertically mounted gpu in both air-cooled and water-cooled mode. The additional 120mm fan provides better cooling for the gpu and a greater intake/exhaust balance for the system.vertical gpu compatiblethe pcie expansion slot panel can be rotated to vertically install the gpus, only an additional riser cable is required. Storageup to 6 x ssd + 2 x hdd storage capacitya total of 2 x 3.5” + 6 x 2.5” drives can be installed with dedicated mounts for storage.cable managementthe lancool 216 offers multiple options for easy cable management. Along the cable grommet bar, 3 large velcro straps can hold 2 different sets of cables. 3 small clips are located along the rear side panel, ideal for cleanly routing the cpu 8pin cable, and 2 additional velcro straps are located near the psu chamber to help hold down the extra psu cable length away from the ventilation path in the bottom chamber.optional accessoriesargb control & usb modulean additional argb control & usb module can be installed at the side of the front panel to provide better control over the front argb fans. The argb control & usb module offers the option to create custom lighting styles by mixing the light effects of both led channels individually.dust filterfor users who take dust management to the next level, a magnetic front panel dust filter is available as an optional accessory. The dust filter fits perfectly between the front panel and the front fans.pcie cablefor vertical gpu mounting, only an additional riser cable is required. With a pcb that has a hole spacing of 112.7mm, the lian-li pcie 4.0 x16 riser cable is compatible with the lancool 216.

EUR 105.90
1

Lian Li pc-o11d-rog - miditornikotelo, Musta, Hopea

Lian Li pc-o11d-rog - miditornikotelo, Musta, Hopea

Bigger in every way a mighy powerful chassis. Modular design flexiblity for any configuration. Hot swappable drives.spacious for multiple and bigger components.seamlessly supporting e-atx motherboards.rgb lighting sync front panel addressable rgb.tempered glass on the front, and left side. E-atx ,atx full tower gaming computer casemodular designflexibility for any configurationhot swappable drivesfor replacement or addition of storage without shutting down the systemspacious for multiple and bigger components(d) 471 x (w) 285 x (h) 513mmeasier built processeffortless cable managementseamlessly supportinge-atx motherboardsextension bar (optional) enables support for the rog dominus extremergb lighting synch front panel addressable rgbbuilt-in rgb effect controlled by the front panel m|c buttons to synch with the motherboard, switch to the 8th modeexquisite aluminum exteriori/o ports panel front panel right side case feeteffortless assemblypush and hold to unlock the top panelscrew-free, quick and easyupgraded cooling supportstronger airflow support for an additional 120mm fan at the rearenough room for a thick radiator at the bottom even when mounting dual gpu or vertical gpumultiple type of ports to satisfy any need4 x usb3.0 + 1 x type c + m|c rgb control buttons2 x usb3.0 at top and bottom to catter to different usage scenariosmore flexibility for gpu configuration8 slots to support dual gpu or vertically mount gpusupporting high-end gpus up to 169mm talloptimized storage layoutinterchangeable, more options for customisation possibility63 inside the drive panel behind the motherboard3 on the mounting bracket beside the motherboardeach section is replacable with 120mm fanso11d distro-plate g1 designed by ekwbmultiple inlet and outlet portssimplifies the water-cooling build processargb lighting effectcome with a powerful ddc3.1 pwm water pumpgerman engineering approvedthe o11 dynamic series from lian li is developed in collaboration with der8aur, a world-renowned german overclocking, water cooling, and gaming evangelist. Always looking for ways to improve computer design and performance, der8auer volunteered his time to review and test the design concepts of the o11d series.starting with the first o11 dynamic and up until the most recent models of the o11d series, lian li appreciates the input from der8auer which helped make the o11d series exceptional cases, especially in terms of custom water cooling compatibility, ease of build, and features offered. As a result, der8auer’s seal of approval is elegantly displayed beside the lian li logo, standing as a statement of quality and reliability.

EUR 214.90
1

Lian Li UNI FAN AL120, RGB, PWM, 120mm -kotelotuuletin, valkoinen

Lian Li UNI FAN AL120, RGB, PWM, 120mm -kotelotuuletin, valkoinen

Modularity fansimply daisy chain the fans together with the slide-in interlocking system to pass the signals through the pin-to-pad contact. Users can choose to go with a single fan or link up to 4 fans in a group, and operate each group with just 2 cables.better performancecompared to uni fan sl120, al120 has better performance in air flow(64.5 cfm), noise levels(17 ~ 28.3 db) and static pressure(2.62 mmh2o).endless lighting effect combinationsthe argb leds are located at the inner fan blade and the four corner edges of the fan frame.users can set both the fan blade lighting effects and the fan frame inner edge lighting effects separately, or go with the built-in combined lighting effects.l-connect 2 software to control al120perfectly control and preview the lighting effect of the al series with l-connect 2 interface.adjust the speed of each fan groupperfectly control and preview the lighting effect of the al series with l-connect 2 interface.fan speed: 800 rpm – 1900 rpmusers can set the fan speed of each group of uni fans manually or set it at pwm to let the motherboard control the speed.set personalized led mode and colordesigned for al120, users can choose to set their personalized lighting effect through l-connect 2. Thousands of combinations can be accomplished.control up to 16 fans in one gothe exclusive controller (uni hub) for the al series that can connect up to 16 fans is included in the 3 pack.manage up to 64 fansl-connect 2 can now manage a maximum of 4 controllers at a time, allowing users to control 64 fans within the software.dazzling at all anglesbrushed aluminum trim with reflecting edges on both sides of the fan frame.rear metallic medallion at the center with cables hidden in x-style fan support.aesthetic details considered for both intake and outtake mounting in the case.

EUR 30.90
1

Lian Li VG4-4-V2X Vertical GPU Kit Black - compatible with O11 Evo XL

Lian Li A3-1W, Vertical GPU kit

Lian Li A3-1X, Vertical GPU kit

Lian Li Odyssey X, lasi-ikkunat - Big Tower -kotelo, hopea

Lian Li Odyssey X, lasi-ikkunat - Big Tower -kotelo, hopea

Odyssey x is a high-quality aluminum chassis that established a unique look for performance-oriented enthusiasts with an open airflow design and spacious main chamber for large components.2 styles with 3 modes of your choiceodyssey x enables pc enthusiasts to transform this full tower case into the mode they prefer.premium aluminum craftsmanshipeach bracket is sturdily designed with high-end materials.revel in the sandblasted and anodized finished premium aluminum.two optional styles can be achieved by mounting the aluminum wings differently at the front panel of the dynamic and dynamic r (rotate) mode, revealing or concealing the interior components.premium aluminum craftsmanshipthe entire designed concept of the odyssey x revolves around an open airflow case for the system to run at maximum performance without thermal throttling. Lighting components are well displayed through the 4mm thick tinted tempered glass panels while abundant airflow comes through large gaps present in the glass panel fold.optimized cable management and ample drive mounting spacewith rubber grommets covering the cable pass-through holes and the presence of the 5 cable channels equipped with velcro straps, routing cables in the odyssey x is an easy job. Moreover, the dynamic mode top cover is converted into a cable cover in performance mode, enhancing the look of the build.there are 3 mounting spaces for 2.5” ssd or 3.5”hdd behind the motherboard tray.front i/o modulethe i/o port module can be relocated to another place in a different mode and can be oriented in the user’s preferred direction.supports up to eeb motherboardno matter configured in which mode, the odyssey x can fit up to eeb motherboards with 8 expansion slots.flexible layout for long gpu and psuthe odyssey x can accommodate gpus of up to 423mm in length and psus of up to 280mm.in collaboration with der8auerlike the o11 dynamic series, lian li consulted with der8auer to review the design of the odyssey x, a world-renowned german overclocking, water cooling, and gaming evangelist.thanks to his contribution, a seal plate of der8auer’s approval and lian li logo is included in the accessory box, users could apply it to any place in the case to show the quality and reliability.

EUR 469.90
1

Lian Li Lancool 207 -miditornikotelo ikkunalla, Musta

Lian Li Lancool 207 -miditornikotelo ikkunalla, Musta

Lancool 207 uudistaa perinteisen atx-asettelun ja pakkaa tehokkaan yhteensopivuuden ja ylivoimaisen jäähdytyksen tyylikkääseen, kompaktiin m-atx-koteloon.saatavana 2 väriälancool 207 on saatavana klassisen mustana ja virkistävän valkoisena, mikä takaa täydellisen yhteensopivuuden tyyliisi.kompakti voimanpesävaikka lancool 207 on pienikokoinen, se tarjoaa huomattavan yhteensopivuuden, sillä se tukee atx-emolevyä, 360 mm:n jäähdytintä, atx-verkkolaitetta ja jopa 375 mm:n näytönohjainta, ja kaikki tämä tyylikkäässä 45,5 litran rungossa.tilaa säästävä innovatiivinen ulkoasulancool 207:n ainutlaatuinen offset-emolevyalusta tarjoaa tilatehokkaan ratkaisun ja parantaa samalla yhteensopivuutta ja ilmavirtaa. 207 tukee tavallisia atx- (maksimileveys 244mm) / m-atx/ itx-emolevyjä.helppo pääsy etupuolelle asennettuun virtalähteeseenverkkolaite on sijoitettu strategisesti eteen, ja liitinportit ovat ulospäin, jotta kaapelit voidaan liittää kätevästi. Lisäksi virtalähteen virtasovittimen jatkojohto on varustettu takaosan virtakäyttöä varten.lancool 207 tarjoaa virtalähteen asennuksen, jossa tuuletin on suunnattu joko ylös- tai alaspäin.ylivoimainen jäähdytystehosen lisäksi, että lancool 207 on suunniteltu kattavilla verkkopaneeleilla ylä-, etu- ja sivupohjassa, siinä on valmiiksi asennettuna neljä suorituskykyistä tuuletinta, jotka takaavat ylivoimaisen jäähdytyksen.pplp labin testit osoittavat, että lancool 207 on niiden rankingin kärkikastissa, joka tarjoaa erinomaista lämpösuorituskykyä.tämä toi sille level-s chassis performance -palkinnon poikkeuksellisesta lämmönhallinnasta.360 mm:n jäähdyttimen yhteensopivuuskotelon yläosa tukee 360 mm:n push-pull-radiaattorikokoonpanoa offset-emolevytarjottimen muotoilun ansiosta.saumaton liitettävyyslancool 207:n ylhäältä kiinnitetty i/o-paneeli tarjoaa helpon pääsyn tärkeimpiin portteihin.

EUR 97.90
1

Lian Li Lancool 207 -miditornikotelo ikkunalla, Valkoinen

Lian Li Lancool 207 -miditornikotelo ikkunalla, Valkoinen

Lancool 207 uudistaa perinteisen atx-asettelun ja pakkaa tehokkaan yhteensopivuuden ja ylivoimaisen jäähdytyksen tyylikkääseen, kompaktiin m-atx-koteloon.saatavana 2 väriälancool 207 on saatavana klassisen mustana ja virkistävän valkoisena, mikä takaa täydellisen yhteensopivuuden tyyliisi.kompakti voimanpesävaikka lancool 207 on pienikokoinen, se tarjoaa huomattavan yhteensopivuuden, sillä se tukee atx-emolevyä, 360 mm:n jäähdytintä, atx-verkkolaitetta ja jopa 375 mm:n näytönohjainta, ja kaikki tämä tyylikkäässä 45,5 litran rungossa.tilaa säästävä innovatiivinen ulkoasulancool 207:n ainutlaatuinen offset-emolevyalusta tarjoaa tilatehokkaan ratkaisun ja parantaa samalla yhteensopivuutta ja ilmavirtaa. 207 tukee tavallisia atx- (maksimileveys 244mm) / m-atx/ itx-emolevyjä.helppo pääsy etupuolelle asennettuun virtalähteeseenverkkolaite on sijoitettu strategisesti eteen, ja liitinportit ovat ulospäin, jotta kaapelit voidaan liittää kätevästi. Lisäksi virtalähteen virtasovittimen jatkojohto on varustettu takaosan virtakäyttöä varten.lancool 207 tarjoaa virtalähteen asennuksen, jossa tuuletin on suunnattu joko ylös- tai alaspäin.ylivoimainen jäähdytystehosen lisäksi, että lancool 207 on suunniteltu kattavilla verkkopaneeleilla ylä-, etu- ja sivupohjassa, siinä on valmiiksi asennettuna neljä suorituskykyistä tuuletinta, jotka takaavat ylivoimaisen jäähdytyksen.pplp labin testit osoittavat, että lancool 207 on niiden rankingin kärkikastissa, joka tarjoaa erinomaista lämpösuorituskykyä.tämä toi sille level-s chassis performance -palkinnon poikkeuksellisesta lämmönhallinnasta.360 mm:n jäähdyttimen yhteensopivuuskotelon yläosa tukee 360 mm:n push-pull-radiaattorikokoonpanoa offset-emolevytarjottimen muotoilun ansiosta.saumaton liitettävyyslancool 207:n ylhäältä kiinnitetty i/o-paneeli tarjoaa helpon pääsyn tärkeimpiin portteihin.

EUR 109.90
1

Lian Li LANCOOL 206RX

EUR 126.90
1

Lian Li LANCOOL 206RW

EUR 116.90
1

Lian Li UNI FAN TL Wireless, White - 120mm

Lian Li UNI FAN TL Wireless, White - 120mm

The uni fan tl wireless and tl lcd wireless feature lian li’s innovative wireless sync technology, utilizing a 2.4ghz wireless signal to control lighting effects and fan speed to further improve the pc building experience while delivering efficient cooling, dazzling lighting, and quiet operation.wireless transmition, easy installationby adopting 2.4ghz wireless technology, the uni fan tl wireless series eliminates the need for traditional hub connections, significantly simplifying the installation process and enhancing user experience.innovative l-wireless controllerinstead of using the traditional connection method, the l-wireless sync controller controls both lighting and fan speeds without connecting the cable to the controller.the fans can be powered via a 4-pin fan header on the motherboard or a sata power cable.for the lcd versions, a usb 2.0 9-pin cable connection to the motherboard is required to set the lcd screen.the lcd and non-lcd versions use different receivers. For mixed clusters, use the lcd version receiver.each fan group requires connection to either a 12v pwm header or a 1-to-3 sata splitter cable.● uni fan tl wireless: pwm cable powers the led and motor.● uni fan tl lcd wireless: pwm cable powers the led and motor; usb cable transmits lcd signals and provides lcd power.the cable length can be shortened with the organizer on the receiver.the transmission logic between the usb port and the lcd has been optimized, enabling the use of an additional usb splitter cable to the usb 2.0 or 3.0 port on the motherboard:● usb splitter cable without sata for additional power (e.g., lian li usb 2.0 1-to-3 hub): supports up to 6 tl lcd wireless fans.● usb splitter cable with sata for additional power (e.g., lian li edge hub): supports up to 9 tl lcd wireless fans.● furthermore, a single motherboard can support up to 20 uni fan tl lcd wireless fans.one controller for allthe l-wireless controller supports uni fan tl wireless, uni fan sl wireless, strimer wireless, and more future products.the l-wireless controller can transmit signals to up to 10 channels.each group of wireless fans occupies one channel, while each strimer wireless uses an additional channel.when all 10 channels are connected to the uni fan tl (non-lcd) wireless, the l-wireless controller can manage up to 40 fans at a time.in the future, the l-wireless controller will also be compatible with more lian li wireless devices. With this controller, you can create a stunning and streamlined lian li ecosystem that combines beauty and simplicity!personalized remix, style on displayuni fan tl wireless and tl lcd wireless now can be mix-matched into a group, offering versatile configurations and empowering creativity.practical and stylish lcd screenthe uni fan tl lcd wireless carries forward the legacy of the world’s first lcd-equipped fan. It features a 1.6” circular lcd screen with 60hz refresh rate (upgraded from 30hz) that integrates seamlessly with lian li’s l-connect 3 software, offering exceptional customizability.performance detail at a glancemonitor cpu and gpu temperature and load with new built-in animated hardware sensors displayed directly on the screen.for clusters of 3 lcd fans, multiple data points can be displayed simultaneously.ombination of performance and aestheticsthe uni fan tl wireless uses lcp material for fan blades, a copper center shaft, and fdb bearings with 9 tightly aligned blades (0.65mm gap), ensuring a striking look without compromising on performance.the uni fan tl wireless offers performance on par with the uni fan p28, the top performer in the uni fan lineup.sophisticated continuous rgb lightingeach uni fan tl wireless series fan has 26 leds with a wide infinity mirror on the 2 sides of the fan frame that wraps around the edges of the anti-vibration pad.seamless softwareable to set different fan speeds for each fan cluster to optimize different scenarios of use providing flexibility for radiator or case fan needs with l-connect 3.l-connect 3 offers a variety of features, such as grouping, naming, and sorting fans for more intuitive management, providing diverse functionality and user-friendly design.

EUR 34.90
1

Lian Li UNI FAN TL Wireless LCD Reverse, 120mm -kotelotuuletin, Musta

Lian Li UNI FAN TL Wireless LCD Reverse, 120mm -kotelotuuletin, Musta

The uni fan tl wireless and tl lcd wireless feature lian li’s innovative wireless sync technology, utilizing a 2.4ghz wireless signal to control lighting effects and fan speed to further improve the pc building experience while delivering efficient cooling, dazzling lighting, and quiet operation.wireless transmition, easy installationby adopting 2.4ghz wireless technology, the uni fan tl wireless series eliminates the need for traditional hub connections, significantly simplifying the installation process and enhancing user experience.innovative l-wireless controllerinstead of using the traditional connection method, the l-wireless sync controller controls both lighting and fan speeds without connecting the cable to the controller.the fans can be powered via a 4-pin fan header on the motherboard or a sata power cable.for the lcd versions, a usb 2.0 9-pin cable connection to the motherboard is required to set the lcd screen.the lcd and non-lcd versions use different receivers. For mixed clusters, use the lcd version receiver.each fan group requires connection to either a 12v pwm header or a 1-to-3 sata splitter cable.● uni fan tl wireless: pwm cable powers the led and motor.● uni fan tl lcd wireless: pwm cable powers the led and motor; usb cable transmits lcd signals and provides lcd power.the cable length can be shortened with the organizer on the receiver.the transmission logic between the usb port and the lcd has been optimized, enabling the use of an additional usb splitter cable to the usb 2.0 or 3.0 port on the motherboard:● usb splitter cable without sata for additional power (e.g., lian li usb 2.0 1-to-3 hub): supports up to 6 tl lcd wireless fans.● usb splitter cable with sata for additional power (e.g., lian li edge hub): supports up to 9 tl lcd wireless fans.● furthermore, a single motherboard can support up to 20 uni fan tl lcd wireless fans.one controller for allthe l-wireless controller supports uni fan tl wireless, uni fan sl wireless, strimer wireless, and more future products.the l-wireless controller can transmit signals to up to 10 channels.each group of wireless fans occupies one channel, while each strimer wireless uses an additional channel.when all 10 channels are connected to the uni fan tl (non-lcd) wireless, the l-wireless controller can manage up to 40 fans at a time.in the future, the l-wireless controller will also be compatible with more lian li wireless devices. With this controller, you can create a stunning and streamlined lian li ecosystem that combines beauty and simplicity!personalized remix, style on displayuni fan tl wireless and tl lcd wireless now can be mix-matched into a group, offering versatile configurations and empowering creativity.practical and stylish lcd screenthe uni fan tl lcd wireless carries forward the legacy of the world’s first lcd-equipped fan. It features a 1.6” circular lcd screen with 60hz refresh rate (upgraded from 30hz) that integrates seamlessly with lian li’s l-connect 3 software, offering exceptional customizability.performance detail at a glancemonitor cpu and gpu temperature and load with new built-in animated hardware sensors displayed directly on the screen.for clusters of 3 lcd fans, multiple data points can be displayed simultaneously.ombination of performance and aestheticsthe uni fan tl wireless uses lcp material for fan blades, a copper center shaft, and fdb bearings with 9 tightly aligned blades (0.65mm gap), ensuring a striking look without compromising on performance.the uni fan tl wireless offers performance on par with the uni fan p28, the top performer in the uni fan lineup.sophisticated continuous rgb lightingeach uni fan tl wireless series fan has 26 leds with a wide infinity mirror on the 2 sides of the fan frame that wraps around the edges of the anti-vibration pad.seamless softwareable to set different fan speeds for each fan cluster to optimize different scenarios of use providing flexibility for radiator or case fan needs with l-connect 3.l-connect 3 offers a variety of features, such as grouping, naming, and sorting fans for more intuitive management, providing diverse functionality and user-friendly design.

EUR 46.90
1

Lian Li UNI FAN TL Wireless, 3-pack, White - 120mm

Lian Li UNI FAN TL Wireless, 3-pack, White - 120mm

The uni fan tl wireless and tl lcd wireless feature lian li’s innovative wireless sync technology, utilizing a 2.4ghz wireless signal to control lighting effects and fan speed to further improve the pc building experience while delivering efficient cooling, dazzling lighting, and quiet operation.wireless transmition, easy installationby adopting 2.4ghz wireless technology, the uni fan tl wireless series eliminates the need for traditional hub connections, significantly simplifying the installation process and enhancing user experience.innovative l-wireless controllerinstead of using the traditional connection method, the l-wireless sync controller controls both lighting and fan speeds without connecting the cable to the controller.the fans can be powered via a 4-pin fan header on the motherboard or a sata power cable.for the lcd versions, a usb 2.0 9-pin cable connection to the motherboard is required to set the lcd screen.the lcd and non-lcd versions use different receivers. For mixed clusters, use the lcd version receiver.each fan group requires connection to either a 12v pwm header or a 1-to-3 sata splitter cable.● uni fan tl wireless: pwm cable powers the led and motor.● uni fan tl lcd wireless: pwm cable powers the led and motor; usb cable transmits lcd signals and provides lcd power.the cable length can be shortened with the organizer on the receiver.the transmission logic between the usb port and the lcd has been optimized, enabling the use of an additional usb splitter cable to the usb 2.0 or 3.0 port on the motherboard:● usb splitter cable without sata for additional power (e.g., lian li usb 2.0 1-to-3 hub): supports up to 6 tl lcd wireless fans.● usb splitter cable with sata for additional power (e.g., lian li edge hub): supports up to 9 tl lcd wireless fans.● furthermore, a single motherboard can support up to 20 uni fan tl lcd wireless fans.one controller for allthe l-wireless controller supports uni fan tl wireless, uni fan sl wireless, strimer wireless, and more future products.the l-wireless controller can transmit signals to up to 10 channels.each group of wireless fans occupies one channel, while each strimer wireless uses an additional channel.when all 10 channels are connected to the uni fan tl (non-lcd) wireless, the l-wireless controller can manage up to 40 fans at a time.in the future, the l-wireless controller will also be compatible with more lian li wireless devices. With this controller, you can create a stunning and streamlined lian li ecosystem that combines beauty and simplicity!personalized remix, style on displayuni fan tl wireless and tl lcd wireless now can be mix-matched into a group, offering versatile configurations and empowering creativity.practical and stylish lcd screenthe uni fan tl lcd wireless carries forward the legacy of the world’s first lcd-equipped fan. It features a 1.6” circular lcd screen with 60hz refresh rate (upgraded from 30hz) that integrates seamlessly with lian li’s l-connect 3 software, offering exceptional customizability.performance detail at a glancemonitor cpu and gpu temperature and load with new built-in animated hardware sensors displayed directly on the screen.for clusters of 3 lcd fans, multiple data points can be displayed simultaneously.ombination of performance and aestheticsthe uni fan tl wireless uses lcp material for fan blades, a copper center shaft, and fdb bearings with 9 tightly aligned blades (0.65mm gap), ensuring a striking look without compromising on performance.the uni fan tl wireless offers performance on par with the uni fan p28, the top performer in the uni fan lineup.sophisticated continuous rgb lightingeach uni fan tl wireless series fan has 26 leds with a wide infinity mirror on the 2 sides of the fan frame that wraps around the edges of the anti-vibration pad.seamless softwareable to set different fan speeds for each fan cluster to optimize different scenarios of use providing flexibility for radiator or case fan needs with l-connect 3.l-connect 3 offers a variety of features, such as grouping, naming, and sorting fans for more intuitive management, providing diverse functionality and user-friendly design.

EUR 103.90
1

Lian Li UNI FAN TL Wireless Reverse, 120mm -kotelotuuletin, Valkoinen

Lian Li UNI FAN TL Wireless Reverse, 120mm -kotelotuuletin, Valkoinen

The uni fan tl wireless and tl lcd wireless feature lian li’s innovative wireless sync technology, utilizing a 2.4ghz wireless signal to control lighting effects and fan speed to further improve the pc building experience while delivering efficient cooling, dazzling lighting, and quiet operation.wireless transmition, easy installationby adopting 2.4ghz wireless technology, the uni fan tl wireless series eliminates the need for traditional hub connections, significantly simplifying the installation process and enhancing user experience.innovative l-wireless controllerinstead of using the traditional connection method, the l-wireless sync controller controls both lighting and fan speeds without connecting the cable to the controller.the fans can be powered via a 4-pin fan header on the motherboard or a sata power cable.for the lcd versions, a usb 2.0 9-pin cable connection to the motherboard is required to set the lcd screen.the lcd and non-lcd versions use different receivers. For mixed clusters, use the lcd version receiver.each fan group requires connection to either a 12v pwm header or a 1-to-3 sata splitter cable.● uni fan tl wireless: pwm cable powers the led and motor.● uni fan tl lcd wireless: pwm cable powers the led and motor; usb cable transmits lcd signals and provides lcd power.the cable length can be shortened with the organizer on the receiver.the transmission logic between the usb port and the lcd has been optimized, enabling the use of an additional usb splitter cable to the usb 2.0 or 3.0 port on the motherboard:● usb splitter cable without sata for additional power (e.g., lian li usb 2.0 1-to-3 hub): supports up to 6 tl lcd wireless fans.● usb splitter cable with sata for additional power (e.g., lian li edge hub): supports up to 9 tl lcd wireless fans.● furthermore, a single motherboard can support up to 20 uni fan tl lcd wireless fans.one controller for allthe l-wireless controller supports uni fan tl wireless, uni fan sl wireless, strimer wireless, and more future products.the l-wireless controller can transmit signals to up to 10 channels.each group of wireless fans occupies one channel, while each strimer wireless uses an additional channel.when all 10 channels are connected to the uni fan tl (non-lcd) wireless, the l-wireless controller can manage up to 40 fans at a time.in the future, the l-wireless controller will also be compatible with more lian li wireless devices. With this controller, you can create a stunning and streamlined lian li ecosystem that combines beauty and simplicity!personalized remix, style on displayuni fan tl wireless and tl lcd wireless now can be mix-matched into a group, offering versatile configurations and empowering creativity.practical and stylish lcd screenthe uni fan tl lcd wireless carries forward the legacy of the world’s first lcd-equipped fan. It features a 1.6” circular lcd screen with 60hz refresh rate (upgraded from 30hz) that integrates seamlessly with lian li’s l-connect 3 software, offering exceptional customizability.performance detail at a glancemonitor cpu and gpu temperature and load with new built-in animated hardware sensors displayed directly on the screen.for clusters of 3 lcd fans, multiple data points can be displayed simultaneously.ombination of performance and aestheticsthe uni fan tl wireless uses lcp material for fan blades, a copper center shaft, and fdb bearings with 9 tightly aligned blades (0.65mm gap), ensuring a striking look without compromising on performance.the uni fan tl wireless offers performance on par with the uni fan p28, the top performer in the uni fan lineup.sophisticated continuous rgb lightingeach uni fan tl wireless series fan has 26 leds with a wide infinity mirror on the 2 sides of the fan frame that wraps around the edges of the anti-vibration pad.seamless softwareable to set different fan speeds for each fan cluster to optimize different scenarios of use providing flexibility for radiator or case fan needs with l-connect 3.l-connect 3 offers a variety of features, such as grouping, naming, and sorting fans for more intuitive management, providing diverse functionality and user-friendly design.

EUR 34.90
1

Computer Case Part Midi Tower Front Panel

Computer Case Part Midi Tower Front Panel

Lian Li UNI HUB SLV2 L-Connect 3 Controller, suited for SLV2 Black fans

Lian Li Galahad GA2ALCD28B

Lian Li GA2ALCD28W