5 resultater (0,19946 sekunder)

Vis alle filtre

Mærke

Butik

Pris (EUR)

Nulstil filter

Produkter
Fra
Butikker

UBEC 10A 2-6S

UBEC 10A 2-6S

Hobbywing UBEC-10A (2-6S) This UBEC is an external switching mode DC-DC regulator; it draws DC voltage from 2-6S LiPo battery, drops it to a voltage level that is suitable for your receivers and other electronic devices, and keeps providing the stable current output of up to 10Amp. As the UBEC has such a powerful output capability, so it?s particularly applicable for large helicopters and fixed-wing aircraft.Features: It adopted the advanced DC-DC regulator chip with conversion efficiency exceeds 90% 4 options for the output voltage, applicable for all kinds of receivers/gyros/servos, etc It owns BEC shoot-through protection, which prevent the input voltage from directly flowing to the output end and causing damages to receivers, servos and other electronic devices It featured other protections like over-current protection, short-circuit protection (at the output end) and thermal protection make the use more safe and reliable 2 cables are connected in parallel at the output end of the UBEC, allow larger current to flow into the receiver It has one status LED, which lights up when the UBEC works normally The external switch can turn on/off the UBEC easily Exquisite aluminum case is helpful for heat dissipation & EMI (Electromagnetic Interference) reduction Specs: Input Voltage: 6V-25.2V (2-6S LiPo) Output Voltage: 5.0V/6.0V/7.4V/8.4V Continuous Current: 10A Peak Current: 20A Dimensions: 43.1 x 32.3 x 12.5mm Weight: 36g

DKK 319.00
1

Hobbywing 30203201 - Platinum 80A ESC 3-8S V5

Hobbywing 30203201 - Platinum 80A ESC 3-8S V5

Hobbywing HW30203201 - PLATINUM 80A V5 SBEC ESC Compact size with efficient heat sink designContinue to use the heat-dissipation structure of PLATINUM V5, The ESC is redesigned with a double-sided hollow heat dissipation structure as well as an addition side "window" design. The air is able to quickly pass through the inside of the ESC and take away the heat generated by the internal circuit board. This innovative air duct design is able to generate strong airflow on the entire ESC from the cooling fan. Overall, significantly improving the capability of heat dissipation.Built-in 12V Switch BEC for greater output capabilityThe high-power BEC has added an anti-reverse circuit to use parallel with external batteries at the same time to provide double protection.Constant speed performance upgrade, Ultimate flight experienceThe 32-bit processor combined with the RPM accuracy algorithm makes the ESC more powerful and more consistent, maximizing the RPM accuracy to enhance overall performance.Compared with the previous ESC,The RPM accuracy algorithm makes the ESC more powerful and more consistent.The adjustable constant speed sensitivity allows every pilot to easily find a setting that suits them personally.Support multiple protocolsMikado VBar System,Futaba S.BUS2 and other devices' data return protocols. Users are able to adjust parameters on the remote-control device (VBar protocol support) or check the working status of the ESC at any time.Synchronous rectification technology multiple advantagesThe ESC has synchronous rectification driving efficiency optimization technology - DEO — DRIVING EFFICIENCY OPTIMIZATION which brings multiple advantages: Higher driving efficiency and longer battery life-span Faster throttle response, enhanced flight stability and flexibility Lower ESC temperature rise, more reliable Multiple protection, double securityIt has multiple protection functions, to effectively prolonging the lifespan of the ESC. Start-up protection Current protection Temperature protection Overload protection Throttle signal loss protection Input voltage abnormality protection Specs: Cont./Peak Current: 80A/120A Input Voltage: 3-8S Lipo BEC Output Switch Mode: 5-12V & Cont. 8A,Peak 20A Input Wires: 12AWG-100mm Output Wires: 14AWG-100mm Input Connectors: No Output Connectors: 3.5mm Gold Connectors (Female) Firmware Upgrade: Supported Telemetry Function: Mikado VBar;Futaba S.Bus2;etc. Size: 60.5x33x17.6mm (without fan) Weight 77.5g (with wires, no fan) Applications: 325-420 class electric helicopters (main blade length 325-420mm) or fixed-wing aircrafts ESC Programing via: Transmitter: Not Supported LED Program Card: Not Supported LED Program Box: Not Supported LCD Program Box: Supported OTA Programmer: Supported Program Port: Separate Program Port

DKK 761.60
1

Hobbywing 30203501 - Platinum 150A ESC SBEC 3-8S V5.1

Hobbywing 30203501 - Platinum 150A ESC SBEC 3-8S V5.1

Hobbywing HW30203501 - PLATINUM 150A V5.1 SBEC ESC Compact size with efficient heat sink designContinue to use the heat-dissipation structure of PLATINUM V5, The ESC is redesigned with a double-sided hollow heat dissipation structure as well as an addition side "window" design. The air is able to quickly pass through the inside of the ESC and take away the heat generated by the internal circuit board. This innovative air duct design is able to generate strong airflow on the entire ESC from the cooling fan. Overall, significantly improving the capability of heat dissipation.Built-in 12V Switch BEC for greater output capabilityThe high-power BEC has added an anti-reverse circuit to use parallel with external batteries at the same time to provide double protection.Constant speed performance upgrade, Ultimate flight experienceThe 32-bit processor combined with the RPM accuracy algorithm makes the ESC more powerful and more consistent, maximizing the RPM accuracy to enhance overall performance.Compared with the previous ESC,The RPM accuracy algorithm makes the ESC more powerful and more consistent.The adjustable constant speed sensitivity allows every pilot to easily find a setting that suits them personally.Support multiple protocolsMikado VBar System,Futaba S.BUS2 and other devices' data return protocols. Users are able to adjust parameters on the remote-control device (VBar protocol support) or check the working status of the ESC at any time.Synchronous rectification technology multiple advantagesThe ESC has synchronous rectification driving efficiency optimization technology - DEO — DRIVING EFFICIENCY OPTIMIZATION which brings multiple advantages: Higher driving efficiency and longer battery life-span Faster throttle response, enhanced flight stability and flexibility Lower ESC temperature rise, more reliable Multiple protection, double securityIt has multiple protection functions, to effectively prolonging the lifespan of the ESC. Start-up protection Current protection Temperature protection Overload protection Throttle signal loss protection Input voltage abnormality protection Specs: Cont./Peak Current: 150A/180A Input Voltage: 3-8S Lipo BEC Output Switch Mode: 5-12V & Cont. 10A,Peak 30A Input Wires: 10AWG-150mm Output Wires: 12AWG-100mm Input Connectors: No Output Connectors: 4mm Gold Connectors (Female) Firmware Upgrade: Supported Telemetry Function: Mikado VBar;Futaba S.Bus2;etc. Size: 83.2x37.1x22.5mm (without fan) Weight 150.4g (with wires, no fan) Applications: 520-580 class electric helicopters (main blade length 520-580mm) or fixed-wing aircrafts ESC Programing via: Transmitter: Not Supported LED Program Card: Not Supported LED Program Box: Not Supported LCD Program Box: Supported OTA Programmer: Supported Program Port: Separate Program Port

DKK 1488.84
1

XeRun XR8 SCT 140A ESC

XeRun XR8 SCT 140A ESC

Full-sensored Mode SupportedThe first 1/8 scale competition ESC which can work the full-sensored mode at alltimes (when pairing it with a HOBBYWING matching motor). Turbo Timing TechnologyTurbo timing technology is implemented by the XR8 SCT to unleash the maximum powerof a HOBBYWING matching motor. Small & Light Structure DesignSmall (30.1% smaller than XR8 Plus in size) and light (36.5g lighter than XR8Plus in weight) structure design greatly simplifies the installation of the power system (esp. for vehicles like buggy and touring car with compact chassis). Programming / Upgrading / Data reading wirelesslyWith Hobbywing's "WiFi Express" module and iPhone or an Android phone (with the HOBBYWING WiFi Link software installed), the user can remotely program parameters, upgrade firmware andcheck relevant data of the ESC without leaving the control stand. CoastingThe XR8 SCT provides an exceptionally smooth off-throttle coasting function, which simulates the feelingof inertia and momentum of a large-scale car driving experience. This can greatly improve the performance of builds utilizing large, high-powered motors as electromagnetic dragbecomes a substantial factor in sudden deceleration when in the off-throttleposition, adversely affecting driving performance and overall maneuvering. Capacitor Thermal ProtectionCapacitor thermal protection implemented by the XR8 SCT will effectively prevent capacitors from exploding and causing irreversible damage to the ESC due to overload. High Voltage Built-in BECHigh voltage built-in BEC with an output current of up to 15 Amp and aswitchable output voltage of 6V-7.4V allows users to use various high torque and high voltage servos. High Reliability & DurabilityBuilt with the most rugged and high-quality components and coupled with cutting-edge firmware, the XR8 SCT is able to deliver unmatched power and performance for even the most hardcoreof racing applications, but is also responsive enough to protect itself from damage dueto overloading due to physical abuse, overuse or even human error. Advanced and Secure Electronic SwitchElectronic switch with a lifespan of over 50000 on/off cycles, housed in a completely waterproof, dust-proof and shock-resistant design. Ultra-Reliable Cooling SystemHOBBYWING's patented cooling technology utilizes proprietary heat-conductive copper bars to rapidly and effectively transfer all internal heat from the MOSFET board to the integrated CNC machined billet aluminum heatsink housing. The cooling fan adopts a shockproof mounting which effectively reduces the possibility of fan damage due to vehicle?s frequent jumps. Wide applicabilityThis XR8 SCT ESC is not only applicable to 1/8thbuggies and short-coursetrucks but also 1/10thshort-course trucks, trucks and monster trucks. Specifications Scale: 1/8 & 1/10 Brushed/Brushless: Brushless Sensored/Sensorless: Sensored Waterproof: No Cont./Peak Current: 140A/880A InputVoltage: 2-4S Lipo/6-12 Cell NiMH BEC Output: Switch Mode: 6V/7.4V,6A Wires & Connectors Input Wires: Red-12AWG-200mm*1/Black--12AWG-200mm*1 Output Wires:Blue -12AWG-200mm*1Yellow-12AWG-200mm*1Orange -12AWG-200mm*1 Input Connectors: No Output Connectors: No (Note: All the wire length above is the original length not the length you see from the outside.) Fan Size: 30x30x10mm Voltage Range: 5-7.4V Powered by: BEC ESC Programing via SET Button on ESC: Not Supported LED Program Box: Not Supported LCD Program Box: Supported WiFi Module: Supported Program Port: PRG/Fan Port Firmware Firmware Upgrade: Supported Size & Weight Size: 54.1x37.2x36.1mm Weight: 90.5g Applications: Vehicles: 1/10thSCT/Truck/Monster Truck & 1/8thBuggy/On-road Racing KV Rating/T Count:With 2S LiPo/6S NiMH: 3660 size motor, KV=6000With 3S LiPo/9S NiMH: 3660 size motor, KV=4000With 4S LiPo/12S NiMH: 3660 size motor, KV=3000With 4S LiPo/12S NiMH: 4268 size motor, KV=2500 Click here to look at FAQ and Software Updates for XR8 SCT

DKK 909.00
1

XeRun XR8 Plus 150A ESC

XeRun XR8 Plus 150A ESC

High Reliability & DurabilityBuilt with the most rugged and high-quality components and coupled with cutting-edge firmware, the XR8 PLUS is able to deliver unmatched power and performance for even the most hardcore of racing applications, but is also responsive enough to protect itself from damage due to overloading due to physical abuse, overuse or even human error. Great Flexibility & VersatilityWith strong torque and excellent output, the XR8 PLUS can definitely cater for all the power hungry requirements that professional drivers need. The highly adjustable parameters of the ESC will allow drivers to enjoy smooth throttle response when the throttle/brake linearity is utmost required. High Voltage Built-in BECThe XR8 PLUS is the world?s first 1/8th ESC that integrates a HV built-in BEC with an output current of up to 15 Amp and a switchable output voltage of 6V-7.4V. The high voltage BEC is designed to handle today?s high voltage servos on demand used by 1/8th scale vehicles. Ultra-Reliable Cooling SystemHOBBYWING?s patented cooling technology utilizes proprietary heat-conductive copper bars to rapidly and effectively transfer all internal heat from the MOSFET board to the integrated CNC machined billet aluminum heatsink housing. The cooling fan adopts a shockproof mounting which effectively reduces the possibility of fan damage due to vehicle?s frequent jumps. CoastingThe XR8 PLUS provides an exceptionally smooth off-throttle coasting function (patent pending), which simulates the feeling of inertia and momentum of a large-scale car driving experience. This can greatly improve the performance of builds utilizing large, high-powered motors as electromagnetic drag becomes a substantial factor in sudden deceleration when in the off-throttle position, adversely affecting driving performance and overall maneuvering. Advanced and Secure Electronic SwitchThe XR8 PLUS features an electronic switch with a lifespan of over 50000 on/off cycles, housed in a completely waterproof, dust-proof and shock-resistant design. Virtually Maintenance Free OperationBecause of the exceptional thought and design put into the XR8 PLUS, users can expect a virtually maintenance free operating experience, due to advanced error sensing and thermal protection, an exceptionally rugged housing, the ultimate in heat-dissipation technology and a special shockproof fan mounting able to withstand anything that a racer can throw at it. High Performance Dynamic Timing AlgorithmThe world?s first 1/8th scale competition ESC which has adopted dynamic timing technology, which has had great successes in 1/10th scale touring car competitions for a long time now, will greatly expand the adjustable power output range of the ESC while still maintaining the overall system efficiency and smoothness. Specifications Scale: 1/8th Brushed/Brushless: BL Sensored/Sensorless: SD Waterproof: No Cont./Peak Current: 150A/950A Input: 2-6S LiPo/6-18 Cells NiMH BEC Output: Switch Mode:6V/7.4V,6A Wires & Connectors Input Wires: Red-10AWG-200mm*1/Red-10AWG-150mm*1/Black-10AWG-150mm*1 Output Wires: Black-12AWG-200mm*3 Input Connectors: No Output Connecotors: No (Note: All the wire length above is the original length not the length you see from the outside.) Fan Size: 30.0x30.0x10.0mm Voltage Range: 5-7.4V Powered by: Powered by BEC ESC Programing via SET Button on ESC: Not Supported LED Program Box: Not Supported LCD Program Box: Supported WiFi Module: Supported Program Port: FAN/Program Port Firmware Firmware Upgrade: Supported Size & Weight Size: 58.7x48.0x36.9mm Weight: 127g Applications Motors: SL BL Motors, SD BL Motors Vehicles: 1/8thTouring Car/Buggy/Truck Competitions KV Rating/T Count: 4S LiPo: KV=3000, 6S LiPo: KV=2400 (40XX Series of Motors) This is an extremely powerful brushless power system. For your safety and the safety of those around you, we strongly recommend removing the pinion gear before performing calibration and programming functions with this system, and keeping wheels in the air when you turn on the ESC.

DKK 1449.00
1