22 resultater (0,23171 sekunder)

Vis alle filtre

Mærke

Butik

Pris (EUR)

Nulstil filter

Produkter
Fra
Butikker

Push Fit Cast Iron Soil Cowl - 100mm

Push Fit Cast Iron Soil Cowl - 100mm

A vent cowl is used at the top of the soil vent pipe to stop birds from entering the pipe where it is open to the atmosphere.As cast iron push fit pipes and fittings are all plain ended a coupler is required to connect this cowl to a soil pipe.All of our push fit cast iron soil fittings are treated to a factory black two-pack gloss paint finish. The whole range is manufactured in grey cast iron to BS EN 1561.This soil pipe range is particularly well-suited to installations in public buildings, listed buildings and conservation projects. It is 100% recyclable.Click here to view or download full installation instructions.

GBP 72.70
1

Push Fit Cast Iron Soil Access Branch - 92.5 Degree x 100mm

Push Fit Cast Iron Soil Access Branch - 92.5 Degree x 100mm

This 92.5 degree branch incorporates an access point that allows the soil pipe to be rodded in either direction. It is often sited where at the point on the external wall where an internal soil pipe connects to the outside soil and vent pipe. To use the access point, simply remove the access door by undoing the bolts. This could potentially release any blockage above the door so it is always advisable to stand aside at this point!The 92.5 degree angle of the branch gives a 2.5 degree fall which promotes a self-cleansing flow within the soil pipe.As our push fit cast iron soil pipes and fittings are all plain ended, sockets are required to connect this branch to a pipe.All of our push fit cast iron soil fittings are treated to a factory black two-pack gloss paint finish. The whole range is manufactured in grey cast iron to BS EN 1561.This soil pipe range is particularly well-suited to installations in public buildings, listed buildings and conservation projects. It is 100% recyclable. Click here to view or download full installation instructions.

GBP 155.22
1

Push Fit Cast Iron Soil Bend - 92.5 Degree x 100mm

Push Fit Cast Iron Soil Bend - 92.5 Degree x 100mm

This 92.5 degree short radius bend is used to create a 90 degree change of direction in the soil stack. The 92.5 degree angle of the bend is used to create a fall of 2.5 degrees within the system, promoting a self-cleansing flow.As our push fit cast iron soil pipes and fittings are all plain ended, sockets are required to connect this bend to a pipe.All of our push fit cast iron soil fittings are treated to a factory black two-pack gloss paint finish. The whole range is manufactured in grey cast iron to BS EN 1561.This soil pipe range is particularly well-suited to installations in public buildings, listed buildings and conservation projects. It is 100% recyclable. Click here to view or download full installation instructions.

GBP 59.15
1

Push Fit Cast Iron Soil Branch - 135 Degree x 100mm

Push Fit Cast Iron Soil Branch - 135 Degree x 100mm

A soil branch is are one of the integral parts of any soil pipe system. It is used to bring horizontal and vertical pipe runs together, usually when connecting a pipe from a WC into the main vertical soil stack.The 92.5 degree branch is the most popular option - the angle creates a 2.5 degree fall that promotes self-cleansing. Soil branches are also available in 112.5 and 135 degree options.As our push fit cast iron soil pipes and fittings are all plain ended, sockets are required to connect this branch to a pipe.All of our push fit cast iron soil fittings are treated to a factory black two-pack gloss paint finish. The whole range is manufactured in grey cast iron to BS EN 1561.This soil pipe range is particularly well-suited to installations in public buildings, listed buildings and conservation projects. It is 100% recyclable. Click here to view or download full installation instructions.

GBP 90.74
1

Push Fit Cast Iron Soil Bend - 22.5 Degree x 100mm

Push Fit Cast Iron Soil Bend - 22.5 Degree x 100mm

This 22.5 degree bend is often referred to as an easy bend. It is used to create a slight change of direction in the soil stack.As our push fit cast iron soil pipes and fittings are all plain ended, sockets are required to connect this bend to a pipe.All of our push fit cast iron soil fittings are treated to a factory black two-pack gloss paint finish. The whole range is manufactured in grey cast iron to BS EN 1561.This soil pipe range is particularly well-suited to installations in public buildings, listed buildings and conservation projects. It is 100% recyclable. Click here to view or download full installation instructions.

GBP 95.72
1

Push Fit Cast Iron Soil Branch - 112.5 Degree x 100mm

Push Fit Cast Iron Soil Branch - 112.5 Degree x 100mm

A soil branch is are one of the integral parts of any soil pipe system. It is used to bring horizontal and vertical pipe runs together, usually when connecting a pipe from a WC into the main vertical soil stack.The 92.5 degree branch is the most popular option - the angle creates a 2.5 degree fall that promotes self-cleansing. Soil branches are also available in 112.5 and 135 degree options.As our push fit cast iron soil pipes and fittings are all plain ended, sockets are required to connect this branch to a pipe.All of our push fit cast iron soil fittings are treated to a factory black two-pack gloss paint finish. The whole range is manufactured in grey cast iron to BS EN 1561.This soil pipe range is particularly well-suited to installations in public buildings, listed buildings and conservation projects. It is 100% recyclable. Click here to view or download full installation instructions.

GBP 90.74
1

Push Fit Cast Iron Soil Bend - 45 Degree x 100mm

Push Fit Cast Iron Soil Bend - 45 Degree x 100mm

This 45 degree bend is used to create a change of direction in the soil stack.As our push fit cast iron soil pipes and fittings are all plain ended, sockets are required to connect this bend to a pipe.All of our push fit cast iron soil fittings are treated to a factory black two-pack gloss paint finish. The whole range is manufactured in grey cast iron to BS EN 1561.This soil pipe range is particularly well-suited to installations in public buildings, listed buildings and conservation projects. It is 100% recyclable. Click here to view or download full installation instructions.

GBP 59.15
1

Push Fit Cast Iron Soil Branch - 92.5 Degree x 100mm

Push Fit Cast Iron Soil Branch - 92.5 Degree x 100mm

A soil branch is are one of the integral parts of any soil pipe system. It is used to bring horizontal and vertical pipe runs together, usually when connecting a pipe from a WC into the main vertical soil stack.The 92.5 degree branch is the most popular option - the angle creates a 2.5 degree fall that promotes self-cleansing. Soil branches are also available in 112.5 and 135 degree options.As our push fit cast iron soil pipes and fittings are all plain ended, sockets are required to connect this branch to a pipe.All of our push fit cast iron soil fittings are treated to a factory black two-pack gloss paint finish. The whole range is manufactured in grey cast iron to BS EN 1561.This soil pipe range is particularly well-suited to installations in public buildings, listed buildings and conservation projects. It is 100% recyclable. Click here to view or download full installation instructions.

GBP 90.74
1

Push Fit Cast Iron Soil Bend - 67.5 Degree x 100mm

Push Fit Cast Iron Soil Bend - 67.5 Degree x 100mm

This 67.5 degree bend is used to create a change of direction in the soil stack. Two bends together can be used to make an offset, or swan neck as it is sometimes called, in the soil stack.As our push fit cast iron soil pipes and fittings are all plain ended, sockets are required to connect this bend to a pipe.All of our push fit cast iron soil fittings are treated to a factory black two-pack gloss paint finish. The whole range is manufactured in grey cast iron to BS EN 1561.This soil pipe range is particularly well-suited to installations in public buildings, listed buildings and conservation projects. It is 100% recyclable. Click here to view or download full installation instructions.

GBP 59.15
1

Push Fit Cast Iron Soil Offset Bend - 75mm Projection x 100mm

Push Fit Cast Iron Soil Offset Bend - 75mm Projection x 100mm

This fixed projection offset bend is usually used to create a vertical offset, or swan neck as it is sometimes called, within the soil stack. This offset bend is available in 75mm and 130mm projection options.As our push fit cast iron soil pipes and fittings are all plain ended, sockets are required to connect this bend to a pipe.All of our push fit cast iron soil fittings are treated to a factory black two-pack gloss paint finish. The whole range is manufactured in grey cast iron to BS EN 1561.This soil pipe range is particularly well-suited to installations in public buildings, listed buildings and conservation projects. It is 100% recyclable. Click here to view or download full installation instructions.

GBP 62.57
1

Push Fit Cast Iron Soil Double Spigot Pipe - 100mm x 1.8mtr

Push Fit Cast Iron Soil Double Spigot Pipe - 100mm x 1.8mtr

Traditional Express push fit cast iron soil pipes are available in 1.8m and 3m lengths. The pipes themselves are given an internal two-pack epoxy resin coating for added protection. All of our push fit cast iron soil pipes are treated to a factory black two-pack gloss paint finish. The whole range is manufactured in grey cast iron to BS EN 1561. This soil pipe range is particularly well-suited to installations in public buildings, listed buildings and conservation projects. It is 100% recyclable. Click here to view or download full installation instructions.

GBP 113.02
1

Push Fit Cast Iron Soil Offset Bend - 130mm Projection x 100mm

Push Fit Cast Iron Soil Offset Bend - 130mm Projection x 100mm

This fixed projection offset bend is usually used to create a vertical offset, or swan neck as it is sometimes called, within the soil stack. This offset bend is available in 75mm and 130mm projection options.As our push fit cast iron soil pipes and fittings are all plain ended, sockets are required to connect this bend to a pipe.All of our push fit cast iron soil fittings are treated to a factory black two-pack gloss paint finish. The whole range is manufactured in grey cast iron to BS EN 1561.This soil pipe range is particularly well-suited to installations in public buildings, listed buildings and conservation projects. It is 100% recyclable. Click here to view or download full installation instructions.

GBP 83.39
1

Push Fit Cast Iron Soil Double Branch - 92.5 Degree x 100mm

Push Fit Cast Iron Soil Double Branch - 92.5 Degree x 100mm

Double branches in a soil stack have a number of uses, but essentially they are used for the purpose of connecting multiple pipe runs, usually in a vertical plane. They are most commonly seen on external elevations, connecting a number of above ground drainage runs together into a single soil stack.As our push fit cast iron soil pipes and fittings are all plain ended, sockets are required to connect this branch to a pipe.All of our push fit cast iron soil fittings are treated to a factory black two-pack gloss paint finish. The whole range is manufactured in grey cast iron to BS EN 1561.This soil pipe range is particularly well-suited to installations in public buildings, listed buildings and conservation projects. It is 100% recyclable. Click here to view or download full installation instructions.

GBP 113.93
1

Push Fit Cast Iron Soil Access Bend - 92.5 Degree x 100mm

Push Fit Cast Iron Soil Access Bend - 92.5 Degree x 100mm

Soil access bends are used to change the direction of a soil pipe whilst allowing access into the pipe from both directions for inspection and cleaning. Used in either a vertical or horizontal plane, the 92.5 degree angle gives a slight fall which promotes a self-cleansing flow within the soil pipe. This bend has a shorter radius than the TX4011 long radius access bend.To use the access point, simply remove the access door by undoing the bolts. This could potentially release any blockage so it is always advisable to stand aside at this point!As our push fit cast iron soil pipes and fittings are all plain ended, sockets are required to connect this bend to a pipe.All of our push fit cast iron soil fittings are treated to a factory black two-pack gloss paint finish. The whole range is manufactured in grey cast iron to BS EN 1561.This soil pipe range is particularly well-suited to installations in public buildings, listed buildings and conservation projects. It is 100% recyclable. Click here to view or download full installation instructions.

GBP 122.39
1

Push Fit Cast Iron Soil Double Spigot Pipe - 100mm x 3mtr

Push Fit Cast Iron Soil Double Spigot Pipe - 100mm x 3mtr

Traditional Express push fit cast iron soil pipes are available in 1.8m and 3m lengths. The pipes themselves are given an internal two-pack epoxy resin coating for added protection. All of our push fit cast iron soil pipes are treated to a factory black two-pack gloss paint finish. The whole range is manufactured in grey cast iron to BS EN 1561. This soil pipe range is particularly well-suited to installations in public buildings, listed buildings and conservation projects. It is 100% recyclable. Click here to view or download full installation instructions. Please note our carrier advises 3m lengths may now require mechanical offload equipment to be available on site.

GBP 188.33
1

Push Fit Cast Iron Soil Long Radius Bend - 92.5 Degree x 100mm

Push Fit Cast Iron Soil Long Radius Bend - 92.5 Degree x 100mm

This 92.5 degree long radius bend is used to create a 90 degree change of direction in the soil stack. It is most commonly used at the foot of a soil stack. The 92.5 degree angle of the bend is used to create a fall of 2.5 degrees within the drainage system, promoting a self-cleansing flow.As our push fit cast iron soil pipes and fittings are all plain ended, sockets are required to connect this bend to a pipe.All of our push fit cast iron soil fittings are treated to a factory black two-pack gloss paint finish. The whole range is manufactured in grey cast iron to BS EN 1561.This soil pipe range is particularly well-suited to installations in public buildings, listed buildings and conservation projects. It is 100% recyclable. Click here to view or download full installation instructions.

GBP 95.72
1

Push Fit Cast Iron Soil Long Tail Bend - 92.5 Degree x 100mm

Push Fit Cast Iron Soil Long Tail Bend - 92.5 Degree x 100mm

This 92.5 degree long tail bend is sometimes referred to as a swivel bend or a pistol bend. It is used to create a sharp change of direction in the soil stack, often in conjunction with another fitting.As our push fit cast iron soil pipes and fittings are all plain ended, sockets are required to connect this bend to a pipe.All of our push fit cast iron soil fittings are treated to a factory black two-pack gloss paint finish. The whole range is manufactured in grey cast iron to BS EN 1561.This soil pipe range is particularly well-suited to installations in public buildings, listed buildings and conservation projects. It is 100% recyclable. Click here to view or download full installation instructions.

GBP 75.70
1

Push Fit Cast Iron Soil Long Radius Access Bend - 92.5 Degree x 100mm

Push Fit Cast Iron Soil Long Radius Access Bend - 92.5 Degree x 100mm

Soil access bends are used to change the direction of a soil pipe whilst allowing access into the pipe from both directions for inspection and cleaning. Used in either a vertical or horizontal plane, the 92.5 degree angle gives a slight fall which promotes a self-cleansing flow within the soil pipe. This bend has a longer radius than the TX4010M short radius access bend. To use the access point, simply remove the access door by undoing the bolts. This could potentially release any blockage so it is always advisable to stand aside at this point!As our push fit cast iron soil pipes and fittings are all plain ended, sockets are required to connect this bend to a pipe.All of our push fit cast iron soil fittings are treated to a factory black two-pack gloss paint finish. The whole range is manufactured in grey cast iron to BS EN 1561.This soil pipe range is particularly well-suited to installations in public buildings, listed buildings and conservation projects. It is 100% recyclable. Click here to view or download full installation instructions.

GBP 161.83
1

Push Fit Cast Iron Soil Branch with Rear Boss - 92.5 Degree x 100mm

Push Fit Cast Iron Soil Branch with Rear Boss - 92.5 Degree x 100mm

This 92.5 degree branch incorporates a waste boss at the rear that allows a waste pipe to be connected into the soil system. The boss is already open and tapped with a 2” BSP thread. The 92.5 degree angle of the branch gives a 2.5 degree fall which promotes a self-cleansing flow within the soil pipe.As our push fit cast iron soil pipes and fittings are all plain ended, sockets are required to connect this branch to a pipe.All of our push fit cast iron soil fittings are treated to a factory black two-pack gloss paint finish. The whole range is manufactured in grey cast iron to BS EN 1561.This soil pipe range is particularly well-suited to installations in public buildings, listed buildings and conservation projects. It is 100% recyclable. Click here to view or download full installation instructions.

GBP 124.70
1

Push Fit Cast Iron Soil Branch with Right Hand Boss - 92.5 Degree x 100mm

Push Fit Cast Iron Soil Branch with Right Hand Boss - 92.5 Degree x 100mm

This 92.5 degree branch incorporates an open boss on one side that allows a waste pipe to be connected into the soil system. On this option the boss on the right hand side when the branch is viewed from the rear. The boss is already open and tapped with a 2andrdquo; BSP thread. The 92.5 degree angle of the branch gives a 2.5 degree fall which promotes a self-cleansing flow within the soil pipe.As our push fit cast iron soil pipes and fittings are all plain ended, sockets are required to connect this branch to a pipe.All of our push fit cast iron soil fittings are treated to a factory black two-pack gloss paint finish. The whole range is manufactured in grey cast iron to BS EN 1561.This soil pipe range is particularly well-suited to installations in public buildings, listed buildings and conservation projects. It is 100% recyclable. Click here to view or download full installation instructions.

GBP 124.70
1

Push Fit Cast Iron Soil Branch with Left Hand Boss - 92.5 Degree x 100mm

Push Fit Cast Iron Soil Branch with Left Hand Boss - 92.5 Degree x 100mm

This 92.5 degree branch incorporates an open boss on one side that allows a waste pipe to be connected into the soil system. On this option the boss on the left hand side when the branch is viewed from the rear. The boss is already open and tapped with a 2andquot; BSP thread. The 92.5 degree angle of the branch gives a 2.5 degree fall which promotes a self-cleansing flow within the soil pipe.As our push fit cast iron soil pipes and fittings are all plain ended, sockets are required to connect this branch to a pipe.All of our push fit cast iron soil fittings are treated to a factory black two-pack gloss paint finish. The whole range is manufactured in grey cast iron to BS EN 1561.This soil pipe range is particularly well-suited to installations in public buildings, listed buildings and conservation projects. It is 100% recyclable. Click here to view or download full installation instructions.

GBP 124.70
1

Push Fit Cast Iron Soil Double Boss Pipe at 90 Degree - 90 Degree x 100mm

Push Fit Cast Iron Soil Double Boss Pipe at 90 Degree - 90 Degree x 100mm

This boss pipe is used to introduce either one or two waste pipes into the soil stack. There are two options to choose from in our double boss pipes andndash; opposite bosses or bossed at 90 degrees to each other. Both of the bosses are already open and tapped with a 2andrdquo; BSP thread. As our push fit cast iron soil pipes and fittings are all plain ended, sockets are required to connect this boss pipe to a soil pipe.All of our push fit cast iron soil fittings are treated to a factory black two-pack gloss paint finish. The whole range is manufactured in grey cast iron to BS EN 1561.This soil pipe range is particularly well-suited to installations in public buildings, listed buildings and conservation projects. It is 100% recyclable. Click here to view or download full installation instructions.

GBP 137.08
1