23 resultater (0,24257 sekunder)

Vis alle filtre

Mærke

Butik

Pris (EUR)

Vis alle

Nulstil filter

Produkter
Fra
Butikker

Bosch HSS-G Borebit Bor/driver

Bosch HSS-G Borebit Bor/driver

- suitable for alloyed and non-alloyed steel up to a tensile strength of 900 n/mm², cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals, hard plastics- precision-ground hss-g drill bit enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground hss drill bits with a chisel edge- self-centring split point drill tip means there is no need to pre-punch or pilot drill up to 10 mm diameter- the hss-g drill bits are available in two qualities. The topline drill bits are for the highest requirements and the standard drill bits are for professional use

EUR 4.90
1

Bosch HSS-G Borebit -poranterä

Bosch HSS-G Borebit -poranterä

- suitable for alloyed and non-alloyed steel up to a tensile strength of 900 n/mm², cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals, hard plastics- precision-ground hss-g drill bit enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground hss drill bits with a chisel edge- self-centring split point drill tip means there is no need to pre-punch or pilot drill up to 10 mm diameter- the hss-g drill bits are available in two qualities. The topline drill bits are for the highest requirements and the standard drill bits are for professional use

EUR 9.90
1

Bosch HSS-G -poranterä

Bosch HSS-G -poranterä

- suitable for alloyed and non-alloyed steel up to a tensile strength of 900 n/mm², cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals, hard plastics- precision-ground hss-g drill bit enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground hss drill bits with a chisel edge- self-centring split point drill tip means there is no need to pre-punch or pilot drill up to 10 mm diameter- the hss-g drill bits are available in two qualities. The topline drill bits are for the highest requirements and the standard drill bits are for professional use

EUR 9.90
1

Bosch HSS-G -poranterä

Bosch HSS-G -poranterä

- suitable for alloyed and non-alloyed steel up to a tensile strength of 900 n/mm², cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals, hard plastics- precision-ground hss-g drill bit enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground hss drill bits with a chisel edge- self-centring split point drill tip means there is no need to pre-punch or pilot drill up to 10 mm diameter- the hss-g drill bits are available in two qualities. The topline drill bits are for the highest requirements and the standard drill bits are for professional use

EUR 8.90
1

Bosch HSS-G -poranterä

Bosch HSS-G -poranterä

- suitable for alloyed and non-alloyed steel up to a tensile strength of 900 n/mm², cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals, hard plastics- precision-ground hss-g drill bit enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground hss drill bits with a chisel edge- self-centring split point drill tip means there is no need to pre-punch or pilot drill up to 10 mm diameter- the hss-g drill bits are available in two qualities. The topline drill bits are for the highest requirements and the standard drill bits are for professional use

EUR 8.90
1

Bosch saber saw blade S955CHC 3pcs - 2608900366 EXPERT RANGE

Bosch saber saw blade S955CHC 3pcs - 2608900366 EXPERT RANGE

Expert ‘thick tough metal’ for long life cutting thick tough metalcutting thick metal such as steel profiles or heavy cast iron pipes is probably not the favourite part of your job. Plumbers, renovators and demolition workers alike know that this is a tough task which, even with a powerful recip saw, requires sweat and muscle. The expert ‘thick tough metal’ not only cuts thick metal, it offers exceptional lifespan in the toughest of applications.with the bosch expert ‘thick tough metal’ reciprocating saw blade, you might just start to enjoy cutting thick steel and cast iron.

EUR 57.90
1

Bosch Expert Thick Tough Metal S 1155 CHC Savklinge Vekselsav

Bosch Expert Thick Tough Metal S 1155 CHC Savklinge Vekselsav

Expert thick tough metal for long life cutting thick tough metalcutting thick metal such as steel profiles or heavy cast iron pipes is probably not the favourite part of your job. Plumbers, renovators and demolition workers alike know that this is a tough task which, even with a powerful recip saw, requires sweat and muscle. The expert ‘thick tough metal’ not only cuts thick metal, it offers exceptional lifespan in the toughest of applications.with the bosch expert ‘thick tough metal’ reciprocating saw blade, you might just start to enjoy cutting thick steel and cast iron.

EUR 43.90
1

Bosch Metal Drill Bit Set 22 Pcs

Bosch Metal Drill Bit Set 22 Pcs

The hss twist drill bit ground is for drilling through metal with maximum precision. The bit's exposed 135-degree self-centering split-point tip combines active cutting and perfect centering without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of hss (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground hss drill bits with chisel edges. This bit is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics. It has a cylindrical shank system (shank equal to drill bit diameter) and is intended for use in drill stands and drill drivers. 135-degree self-centering split-point tip combines active cutting and perfect centering without wandering precision-ground bit made of hss enables fast results no need to pre-punch or pilot drill up to 10 mm-diameter

EUR 73.90
1

Bosch HSS-G Borebit Bor/driver

Bosch HSS-G Borebit Bor/driver

The hss twist drill bit ground is for drilling through metal with maximum precision. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of hss (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground hss drill bits with chisel edges. This bit is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics. It has a cylindrical shank system (shank equal to drill bit diameter) and is intended for use in drill stands and drill drivers. The hss twist drill bit ground is manufactured to din 338. The drill bit is type n (flute angle) with a 135-degree tip and a diameter tolerance of h8.

EUR 13.90
1

Bosch RobustLine HSS-Co-Metallb.Set10pcs - 2607019925

Bosch RobustLine HSS-Co-Metallb.Set10pcs - 2607019925

The hss twist drill bit cobalt provides long-lasting performance when drilling stainless steel. This extended lifetime results from a cobalt alloy content of 5% and fully ground hss (high-speed steel), which provides excellent surface quality, wear resistance and heat protection. Equipped with two cutters and two flutes, chips are removed quickly to make the bit last even longer. This drill bit works with alloyed and non-alloyed steel, stainless steel, cast iron, cast steel and acid- and heat-resistant steels. This drill bit works with alloyed and non-alloyed steel, stainless steel, cast iron, cast steel and acid- and heat-resistant steels. It has a cylindrical shank system (shank equal to drill bit diameter) and is intended for use in drill stands and drill drivers. The hss twist drill bit cobalt is manufactured to din 338. The drill bit is type n (flute angle) with a 135-degree tip and a diameter tolerance of h8. Active cutting and perfect centring without wandering are achieved by the pointed split-point tip.

EUR 47.90
1

Bosch ProBox HSS-Co, DIN 338 -poranterä

Bosch ProBox HSS-Co, DIN 338 -poranterä

The hss twist drill bit cobalt provides long-lasting performance when drilling stainless steel. This extended lifetime results from a cobalt alloy content of 5% and fully ground hss (high-speed steel), which provides excellent surface quality, wear resistance and heat protection. Equipped with two cutters and two flutes, chips are removed quickly to make the bit last even longer. This drill bit works with alloyed and non-alloyed steel, stainless steel, cast iron, cast steel and acid- and heat-resistant steels. This drill bit works with alloyed and non-alloyed steel, stainless steel, cast iron, cast steel and acid- and heat-resistant steels. It has a cylindrical shank system (shank equal to drill bit diameter) and is intended for use in drill stands and drill drivers. The hss twist drill bit cobalt is manufactured to din 338. The drill bit is type n (flute angle) with a 135-degree tip and a diameter tolerance of h8. Active cutting and perfect centring without wandering are achieved by the pointed split-point tip.

EUR 134.90
1

Bosch HSS-Co Borebit Bor/driver

Bosch HSS-Co Borebit Bor/driver

Long lifetime when drilling stainless steelhss twist drill bit cobalt provides long-lasting performance when drilling stainless steel- two cutters and two flutes remove chips quickly to make the bits last even longer- manufactured to din 338, drill bit type n (flute angle) with a 135-degree tip, diameter tolerance h8- active cutting and perfect centring without wandering are achieved by the pointed split-point tipthe hss twist drill bit cobalt is manufactured to din 338. The drill bit is type n (flute angle) with a 135-degree tip and a diameter tolerance of h8. Active cutting and perfect centring without wandering are achieved by the pointed split-point tip.this drill bit works with alloyed and non-alloyed steel, stainless steel, cast iron, cast steel and acid- and heat-resistant steels. It has a cylindrical shank system (shank equal to drill bit diameter) and is intended for use in drill stands and drill drivers.

EUR 11.90
1

Bosch PointTeQ Borebitsæt

Bosch PointTeQ Borebitsæt

The hss twist drill bit pointteq enables fast drilling in metal due to its pointteq tip design. Quick and easy drilling starts are possible as the self-centering tip prevents wandering. Because of its increased drilling rate, less heat and wear are generated. The pointteq tip design remains sharp and ensures continuous durability. This bit is suitable for drilling clearance and pilot holes in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron and plastics. It has a cylindrical shank system (shank equal to drill bit diameter) and is intended for use in drill stands and drill drivers. There is a low risk of breakage, especially for drill bits below 6 mm in diameter as the bit is manufactured to have a highly elastic body. Its black-oxide coated flute provides fast chip removal. The hss twist drill bit pointteq is manufactured to din 338. The drill bit is type n (flute angle) with a tip of 135 degrees.

EUR 14.90
1

Bosch HSS PointTeQ Borebitsæt

Bosch HSS PointTeQ Borebitsæt

The hss twist drill bit pointteq enables fast drilling in metal due to its pointteq tip design. Quick and easy drilling starts are possible as the self-centering tip prevents wandering. Because of its increased drilling rate, less heat and wear are generated. The pointteq tip design remains sharp and ensures continuous durability. This bit is suitable for drilling clearance and pilot holes in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron and plastics. It has a cylindrical shank system (shank equal to drill bit diameter) and is intended for use in drill stands and drill drivers. There is a low risk of breakage, especially for drill bits below 6 mm in diameter as the bit is manufactured to have a highly elastic body. Its black-oxide coated flute provides fast chip removal. The hss twist drill bit pointteq is manufactured to din 338. The drill bit is type n (flute angle) with a tip of 135 degrees.

EUR 8.90
1

Bosch hss twist drill bit pointteq set, 5-pieces

Bosch hss twist drill bit pointteq set, 5-pieces

The hss twist drill bit pointteq enables fast drilling in metal due to its pointteq tip design. Quick and easy drilling starts are possible as the self-centering tip prevents wandering. Because of its increased drilling rate, less heat and wear are generated. The pointteq tip design remains sharp and ensures continuous durability. This bit is suitable for drilling clearance and pilot holes in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron and plastics. It has a cylindrical shank system (shank equal to drill bit diameter) and is intended for use in drill stands and drill drivers. There is a low risk of breakage, especially for drill bits below 6 mm in diameter as the bit is manufactured to have a highly elastic body. Its black-oxide coated flute provides fast chip removal. The hss twist drill bit pointteq is manufactured to din 338. The drill bit is type n (flute angle) with a tip of 135 degrees.

EUR 39.90
1

Bosch Cutting disc straight 125mm

Bosch Cutting disc straight 125mm

Are you a metalworker who needs an efficient and long-lasting disc to cut stainless steel and metal? The pro stainless steel and metal offers a good balance between lifetime and speed.with its thickness of 1.6 mm, the pro stainless steel and metal bonded cutting disc is a great choice when you need a good balance between lifetime and speed. We used premium aluminium oxide grains to ensure strength and durability. We combined the grains with functional fillers and additives to reduce heat builds-up. A high-quality fibreglass net reinforces the disc, making it safer to use. Plus, we made it iron free. This means you don’t need to worry about rust on your workpiece, if you cut stainless steel only.

EUR 3.90
1

Bosch Cordless Jigsaw GST 18V-155 BC Professional solo, 18V (blue/black, without battery and charger, in L-BOXX)

Bosch Cordless Jigsaw GST 18V-155 BC Professional solo, 18V (blue/black, without battery and charger, in L-BOXX)

Gst 18v-155 bc professional: further informationproduct highlightsgst 18v-155 bc professional (with bow handle) comes with brushless motor and well-balanced tool design. The top handle gripping area and its variable speed trigger ensure perfect tool control. Its saw blade guidance prevents blade bending even in small curves and supports work with perfect precision. The tool is compatible with external dust extraction. Its large saw blade ejection lever and the drop control ensure increased user health and safety protection.equipment & applicationit is ideal for curved and cross cuts in solid wood, chipboard, and wood composites as well as in thicker or harder materials. It is compatible with guide rails via adapter and with all bosch professional 18v batteries and chargers (professional 18v system).additional informationthe tool comes with a robust, die-cast aluminium base plate with two fixing points for increased stability and safety. Its connectivity module allows individual speed and light settings and provides important tool information.

EUR 346.90
1

Bosch Cordless Jigsaw GST 18V-155 BC Professional solo, 18V (blue/black, without battery and charger)

Bosch Cordless Jigsaw GST 18V-155 BC Professional solo, 18V (blue/black, without battery and charger)

Gst 18v-155 bc professional: further informationproduct highlightsgst 18v-155 bc professional (with bow handle) comes with brushless motor and well-balanced tool design. The top handle gripping area and its variable speed trigger ensure perfect tool control. Its saw blade guidance prevents blade bending even in small curves and supports work with perfect precision. The tool is compatible with external dust extraction. Its large saw blade ejection lever and the drop control ensure increased user health and safety protection.equipment & applicationit is ideal for curved and cross cuts in solid wood, chipboard, and wood composites as well as in thicker or harder materials. It is compatible with guide rails via adapter and with all bosch professional 18v batteries and chargers (professional 18v system).additional informationthe tool comes with a robust, die-cast aluminium base plate with two fixing points for increased stability and safety. Its connectivity module allows individual speed and light settings and provides important tool information.

EUR 297.90
1

Bosch Cordless Jigsaw GST 18V-155 SC Professional solo, 18V (blue/black, without battery and charger, in L-BOXX)

Bosch Cordless Jigsaw GST 18V-155 SC Professional solo, 18V (blue/black, without battery and charger, in L-BOXX)

Product highlightsgst 18v-155 sc professional (with barrel grip) comes with brushless motor and well-balanced tool design. Its ergonomic shape enables a 360° gripping circumference and the double-sided switch for right and left handers ensures perfect handling and tool control – even when sawing upside down. Its saw blade guidance prevents blade bending even in small curves and supports work with perfect precision. The tool is compatible with external dust extraction. Its large saw blade ejection lever and the drop control ensure increased user health and safety protection.equipment & applicationit is ideal for curved and cross cuts in solid wood, chipboard, and wood composites as well as in thicker or harder materials. It is compatible with guide rails via adapter and with all bosch professional 18v batteries and chargers (professional 18v system).additional informationthe tool comes with a robust, die-cast aluminium base plate with two fixing points for increased stability and safety. The adaptive speed control (asc) supports high precision when starting the cut. Its connectivity module allows individual speed and light settings and provides important tool information.

EUR 347.90
1

Bosch Cutting disc Rapido straight 125mm

Bosch Cutting disc Rapido straight 125mm

Pro stainless steel and metal for long life cutting stainless steel and metallooking for a long-lasting cutting disc to cut stainless steel and metal? Try the pro stainless steel and metal. We made it with premium abrasive grains so that you can enjoy its performance for a long time.the pro stainless steel and metal bonded cutting disc uses premium aluminium oxide grains to make sure you get fast and effective cuts in stainless steel and metal. We combined the grains with functional fillers and embedded them in a phenol resin matrix for strength, resistance to heat and stable performance. We reinforced the disc with high-quality fibreglass to ensure it's safer to use. Plus, we made it iron free. This means you don’t need to worry about rust on your workpiece, if you cut stainless steel only.- appropriate for hand-held angle grinders.- maximum circumferential speed: 80 m/s (depending on rpm and disc diameter).- fe/s/cl < 0.1%.- the thin rapido disc offers many advantages: fast and clean cutting with little exertion of force, very accurate, less noise and dust, and no blue discolouration or burr formation.

EUR 3.90
1

Bosch GTS 635-216 Professional -pöytäsaha

Bosch GTS 635-216 Professional -pöytäsaha

The table saw gts 635-216 professional from bosch combines a high cutting capacity with convenience in mobile applications. The arrangement of motor and gearbox has been optimized so that the saw blade protrudes further than with conventional table saws ‒ and thus achieves more cutting height with a smaller blade. The gts 635-216 professional's high cutting width is achieved as its rip fence is extended beyond the edge of the saw table and serving as a support. This allows panels of up to 635 millimeters to be cut to size. The saw is equipped with a powerful 1600w motor ensuring a fast work progress in every application - both longitudinal cuts in board materials, floor panels and fitting strips as well as cutting to length of squared timber and baseboards. For hardwood workpieces, the gts 635-216 professional offers a further advantage: its 216mm saw blade generates a stronger torque at the cutting tooth compared to blades with a larger diameter. This means it pulls harder and the user can saw faster. The particularly stable rip fence made of die-cast aluminum ensures high precision: it is attached to the front and rear of the table saw with a double clamp and thus sits reliably with every cut. High performance and comfort in mobile applications best cutting height and width for all common applications light and compact for convenient transport self-closing protective guard for high user protection

EUR 493.90
1