38 Ergebnisse (0,19236 Sekunden)

Alle Filter anzeigen

Marke

Farbe

Händler

Preis (EUR)

Filter zurücksetzen

Produkte
Von
Shops

Grundfos 15-14bx pm - Pumpen - 97916772

Grundfos 15-14bx pm - Pumpen - 97916772

15-14 BX Pmthe High Efficiency Coomfort PM Range is a Product For Domestic Hotwater Recirculation in 1 And 2 Family Houses.The Motor is a Single-phase, 2-pole, Hysteresis, Permanent-magnet Motor in Conformity With The Emcdirective.Characteristics And Benefits:* Unique Autoadapt Saves up to 50% Heatenergy And 87% Motor Energy Compared With a Standard Pump in Continuous Operation* Flushing Function* Automatic Legionella Operation (if Supported From The System)* Automatic Weekend And Vacation Function* Temperature Control Optional* Continuous Operation Optional* Fast And Simple Electrical Installation Due to The Million Times Trusted Alpha Plug* Easy to Clean And Lime Insensitive Spheric Rotor* Application Area up 14°dH Water Hardness* Wearless Operation Due to Liquid Lubricated Bearing* No Leakage Risk Due to a Static Seal* Easy Maintenance And Cleaning by Easy-to-separated Motor Head That Fits on All Standard Circulation Pump Housings* Korrosion Resistant Pump Housing in Brass* Due to Impedance Protected Motor no Motor Protection Necessary* No Additional Installation Costs Due to Integrated Non Return And Stop Valve in The Pump Housingliquid:Liquid Temperature Range:2 .. 95 °Ctechnical:TF Class:95approvals on Nameplate:Vde,GS,Cematerials:Pump Housing:Brass MS 68impeller:Stainless Steel, Epdm, Ppo, Ptfe, Graphitinstallation:Maximum Operating Pressure:10 Barpipe Connection:G 1 1/4port-to-port Length:110 Mmelectrical Data:Max. Power Input:8 Wrated Voltage:1 x 230 Vcurrent in Speed 3:0.07 Acapacitor Size - Run:0.6 Fenclosure Class (Iec 34-5):Ip44insulation Class (Iec 85):Fothers:Net Weight:1.35 Kggross Weight:1.51 Kgshipping Volume:0.003 m3

EUR 292.26
1

Grundfos Up15-14b pm - Pumpen - 97916771

Grundfos Up15-14b pm - Pumpen - 97916771

UP 15-14 B Pmthe High Efficiency Coomfort PM Range is a Product For Domestic Hotwater Recirculation in 1 And 2 Family Houses.The Motor is a Single-phase, 2-pole, Hysteresis, Permanent-magnet Motor in Conformity With The Emcdirective.Characteristics And Benefits:* Unique Autoadapt Saves up to 50% Heatenergy And 87% Motor Energy Compared With a Standard Pump in Continuous Operation* Flushing Function* Automatic Legionella Operation (if Supported From The System)* Automatic Weekend And Vacation Function* Temperature Control Optional* Continuous Operation Optional* Fast And Simple Electrical Installation Due to The Million Times Trusted Alpha Plug* Easy to Clean And Lime Insensitive Spheric Rotor* Application Area up 14°dH Water Hardness* Wearless Operation Due to Liquid Lubricated Bearing* No Leakage Risk Due to a Static Seal* Easy Maintenance And Cleaning by Easy-to-separated Motor Head That Fits on All Standard Circulation Pump Housings* Korrosion Resistant Pump Housing in Brass* Due to Impedance Protected Motor no Motor Protection Necessary* No Additional Installation Costs Due to Integrated Non Return And Stop Valve in The Pump Housingliquid:Liquid Temperature Range:2 .. 95 °Ctechnical:TF Class:95approvals on Nameplate:Vde,GS,Cematerials:Pump Housing:Brass MS 68impeller:Stainless Steel, Epdm, Ppo, Ptfe, Graphitinstallation:Maximum Operating Pressure:10 Barpipe Connection:Rp 1/2port-to-port Length:80 Mmelectrical Data:Max. Power Input:8 Wrated Voltage:1 x 230 Vcurrent in Speed 3:0.07 Acapacitor Size - Run:0.6 Fenclosure Class (Iec 34-5):Ip44insulation Class (Iec 85):Fothers:Net Weight:1 Kggross Weight:1.12 Kgshipping Volume:0.003 m3

EUR 209.98
1

Grundfos Up15-14ba pm - Pumpen - 97916757

Grundfos Up15-14ba pm - Pumpen - 97916757

UP 15-14 BA Pmthe High Efficiency Coomfort PM Range is a Product For Domestic Hotwater Recirculation in 1 And 2 Family Houses.The Motor is a Single-phase, 2-pole, Hysteresis, Permanent-magnet Motor in Conformity With The Emcdirective.Characteristics And Benefits:* Unique Autoadapt Saves up to 50% Heatenergy And 87% Motor Energy Compared With a Standard Pump in Continuous Operation* Flushing Function* Automatic Legionella Operation (if Supported From The System)* Automatic Weekend And Vacation Function* Temperature Control Optional* Continuous Operation Optional* Fast And Simple Electrical Installation Due to The Million Times Trusted Alpha Plug* Easy to Clean And Lime Insensitive Spheric Rotor* Application Area up 14°dH Water Hardness* Wearless Operation Due to Liquid Lubricated Bearing* No Leakage Risk Due to a Static Seal* Easy Maintenance And Cleaning by Easy-to-separated Motor Head That Fits on All Standard Circulation Pump Housings* Korrosion Resistant Pump Housing in Brass* Due to Impedance Protected Motor no Motor Protection Necessary* No Additional Installation Costs Due to Integrated Non Return And Stop Valve in The Pump Housingliquid:Liquid Temperature Range:2 .. 95 °Ctechnical:TF Class:95approvals on Nameplate:Vde,GS,Cematerials:Pump Housing:Brass MS 68impeller:Stainless Steel, Epdm, Ppo, Ptfe, Graphitinstallation:Maximum Operating Pressure:10 Barpipe Connection:Rp 1/2port-to-port Length:80 Mmelectrical Data:Max. Power Input:8 Wrated Voltage:1 x 230 Vcurrent in Speed 3:0.07 Acapacitor Size - Run:0.6 Fenclosure Class (Iec 34-5):Ip44insulation Class (Iec 85):Fothers:Net Weight:1 Kggross Weight:1.12 Kgshipping Volume:0.003 m3

EUR 342.66
1

Grundfos Unilift Kp250-m-1 1x220-230v 50hz 10m Sch - Pumpen - 012h1300

Grundfos Unilift Kp250-m-1 1x220-230v 50hz 10m Sch - Pumpen - 012h1300

Unilift KP 250 M 1submersible Drainage Pumpvertical Single-stage Stainless Steel Submersiblepump With Vertical Discharge Port And Integratedsubmersible 1-phase Canned Motor Ininsulation Class F With Thermal Overloadprotection. The Pump is Fitted With a Suction Strainer, Acarrying Handle And is Supplied With a 10 Mmains Cable.The Impeller is a Semi-open Impeller For 10 Mmfree Passage Suitable For Pumping Groundwater,Surface Water, Rain Water And Similar Liquids.The Pump Has a Double Shaft Seal Consisting Oftwo Lip Seals With Grease In-between.The Pump Has an Outer Casing Ensuring Continuouscooling of The Motor by The Pumped Liquid.The Rotor Shaft Operates in Two Maintenance-freecarbon Bearings Cooled by The Pumped Liquidthe Motor is Filled With a Non-toxic Motor Liquid.Liquid:Liquid Temperature Range:0 .. 50 °Ctechnical:Maximum Particle Size:10 Mmmaterials:Pump Housing:Stainless Steelpump Housing:Din W.-Nr. 1.4301pump Housing:Aisi 304impeller:Stainless Steelimpeller:Din W.-Nr. 1.4031impeller:Aisi 304installation:Pump Outlet:Rp 1 1/4maximum Installation Depth:10 Melectrical Data:Power Input - P1:480 Wrated Voltage:1 x 220-230 Vrated Current:2.3 Acapacitor Size - Run:8 F/400 Venclosure Class (Iec 34-5):Ip68insulation Class (Iec 85):Flength of Cable:10 Mtype of Cable Plug Schukoothers:Net Weight:7 Kggross Weight:7.3 Kgshipping Volume:0.013 m3

EUR 478.28
1

Grundfos Unilift Kp350-a-1 1x220-240v 50hz 10m Sch - Pumpen - 013n1800

Grundfos Unilift Kp350-a-1 1x220-240v 50hz 10m Sch - Pumpen - 013n1800

Unilift KP 350 A 1submersible Drainage Pumpvertical Single-stage Stainless Steel Submersiblepump With Vertical Discharge Port And Integratedsubmersible 1-phase Canned Motor Ininsulation Class F With Thermal Overloadprotection. The Pump is Fitted With Suction Strainer And Acarrying Handle And is Supplied With a 10 Mmains Cable And Float Switch For Automatic Startand Stop.The Impeller is a Semi-open Impeller For 10 Mmfree Passage Suitable For Pumping Groundwater,Surface Water, Rain Water And Similar Liquids.The Pump Has a Double Shaft Seal Consisting Oftwo Lip Seals With Grease In-between.The Pump Has an Outer Casing Ensuring Continuouscooling of The Motor by The Pumped Liquid.The Rotor Shaft Operates in Two Maintenance-freecarbon Bearings Cooled by The Pumped Liquid.The Motor is Filled With a Non-toxic Motor Liquid. Liquid:Liquid Temperature Range:0 .. 50 °Ctechnical:Maximum Particle Size:10 Mmmaterials:Pump Housing:Stainless Steelpump Housing:Din W.-Nr. 1.4301pump Housing:Aisi 304impeller:Stainless Steelimpeller:Din W.-Nr. 1.4031impeller:Aisi 304installation:Pump Outlet:Rp 1 1/4maximum Installation Depth:10 Melectrical Data:Power Input - P1:700 Wrated Voltage:1 x 220-240 Vrated Current:3.2 Acapacitor Size - Run:8 F/400 Venclosure Class (Iec 34-5):Ip68insulation Class (Iec 85):Flength of Cable:10 Mtype of Cable Plug: Schukoothers:Net Weight:8 Kggross Weight:8.3 Kgshipping Volume:0.013 m3

EUR 762.67
1

Grundfos Unilift Cc5 - a1 - Pumpen - 96280966

Grundfos Unilift Cc5 - a1 - Pumpen - 96280966

Unilift CC 5 Grundfos Unilift CC Pumps Are Single-stage Submersible Pumps With a Low Suction Ability Down to 3 mm Water Level.The Pumps Are Designed For Pumping Rainwater And Grey Wastewater, e.g. From Washing Machines, Baths, Sinks, Etc. From Low-lying Parts of Buildings up to Sewer Level Cellars or Buildings Prone to Flooding Draining Wells Wells For Surface Water With Inlets From Roof Gutters, Pits, Tunnels, Etc. Swimming Pools, Ponds or Fountains.The Pumps Are Suitable For Both Stationary And Portable Use.They Are For Automatic Operation.The Pumps Allow Free Passage of Particles up to Ø10 mm.The Motor Incorporates Automatic Overload Protection Cutting Out The Motor in Case of Overload.When Cooled to Normal Temperature, The Motor Restarts Automatically.Technical:Maximum Particle Size:10 Mmmaterials:Pump Housing:PP 15 Gfimpeller:Ppom 20 Gfinstallation:Pump Outlet:1.1/4'maximum Installation Depth:10 Mliquid:Liquid Temperature Range:0 .. 40 °Celectrical Data:Rated Voltage:1 x 220-240 Vrated Current:0.98 Acapacitor Size - Run:4 F/450 Venclosure Class (Iec 34-5):Ip68insulation Class (Iec 85):Blength of Cable:5 Mtype of Cable Plug:Schukoothers:Net Weight:4.35 Kggross Weight:5 Kgshipping Volume:0.168 m3

EUR 261.67
1

Grundfos Cr3-4 A-a-a-e-hqqe 3x230/400 50hz - Pumpen - 96516592

Grundfos Cr3-4 A-a-a-e-hqqe 3x230/400 50hz - Pumpen - 96516592

CR 3-4 A-a-a-e-hqqevertical, Multistage Centrifugal Pump With Suction And Discharge Ports on Same The Level (In-line) Enabling Installation in a Horizontal One-pipe System. The Pump Head And Base Are in Cast Iron - All Other Wetted Parts Are in Stainless Steel. A Cartridge Shaft Seal Ensures High Reliability, Safe Handling And Easy Service And Access. Power Transmission is Via a Split Coupling. Pipework Connection is Via Oval Flanges With Internal Rp Threads.The Pump is Fitted With a 3-phase, Fan-cooled Asynchronous Motor.{br}Liquid:Liquid Temperature Range:-20 .. 120 °Ctechnical:Speed For Pump Data:2873 Rpmrated Flow:3 M3/hrated Head:19.1 Mshaft Seal:Hqqeapprovals on Nameplate:CE,Trcurve Tolerance:Iso 9906:1999 Annex Amaterials:Pump Housing:Cast Ironpump Housing:En-jl1030pump Housing:Astm A48-30 Bimpeller:Stainless Steelimpeller:Din W.-Nr. 1.4301impeller:Aisi 304installation:Maximum Ambient Temperature:40 °Cmax Pressure at Stated Temp:16 Bar / 120 °Cmax Pressure at Stated Temp:16 Bar / -20 °Cflange Standard:Ovalpipe Connection:Rp 1flange Size For Motor:Ft85electrical Data:Motor Type:71aie Efficiency Class:Nanumber of Poles:2rated Power - P2:0.37 Kwpower (P2) Required by Pump:0.37 Kwpower (P2) Required by Pump:0.37 Kwrated Voltage:3 x 220-240 D/380-415 Y Vrated Current:1,74/1,00 Astarting Current:490-530 %Cos Phi - Power Factor:0,80-0,70rated Speed:2850-2880 Rpmefficiency:78,5%Motor Efficiency at Full Load:78,5 %Motor Efficiency at 3/4 Load:79,0-76,5 %Motor Efficiency at 1/2 Load:75,5-71,5 %Enclosure Class (Iec 34-5):55 (Protect. Water Jets/dust)Insulation Class (Iec 85):Fothers:Minimum Efficiency Index, Mei =:0.7net Weight:18.7 Kggross Weight:21.4 Kgshipping Volume:0.05 m3

EUR 1156.23
1

Grundfos Unilift Pump Cc7-a1 - Pumpen - 98624463

Grundfos Unilift Pump Cc7-a1 - Pumpen - 98624463

Grundfos Unilift CC Pumps Are Single-stage Submersible Pumps With a Low Suction Ability Down to 3 mm Water Level. The Pumps Are Designed For Pumping Rainwater And Grey Wastewater, e.g. From Washing Machines, Baths, Sinks, Etc. From Low-lying Parts of Buildings up to Sewer Levelcellars or Buildings Prone to Floodingdraining Wellswells For Surface Water With Inlets From Roof Gutters, Pits, Tunnels, Etc.Swimming Pools, Ponds or Fountains.The Pumps Are Suitable For Both Stationary And Portable Use. They Are For Automatic Operation. The Pumps Allow Free Passage of Particles up to Ø10 mm. The Motor Incorporates Automatic Overload Protection Cutting Out The Motor in Case of Overload. When Cooled to Normal Temperature, The Motor Restarts Automatically. Technical: Maximum Particle Size: 10 mm Materials: Pump Housing: PP 15 GF Impeller: Ppom 20 GF Installation: Pump Outlet: 1.1/4 Maximum Installation Depth: 10 m Liquid: Pumped Liquid: Any Newtonian Liquid Liquid Temperature Range: 0 .. 40 °C Density: 998.2 Kg/m3 Electrical Data: Mains Frequency: 50 Hz Rated Voltage: 1 x 220-240 V Rated Current: 1.8 A Capacitor Size - Run: 8 F/450 V Enclosure Class (Iec 34-5): Ip68 Insulation Class (Iec 85): F Length of Cable: 10 m Type of Cable Plug: Schuko

EUR 317.48
1

Grundfos Multibox With Unilift Cc7-a1 And 2 Hose 15 m - Pumpen - 97519841

Grundfos Multibox With Unilift Cc7-a1 And 2 Hose 15 m - Pumpen - 97519841

Grundfos Unilift CC Pumps Are Single-stage Submersible Pumps With a Low Suction Ability Down to 3 mm Water Level. The Pumps Are Designed For Pumping Rainwater And Grey Wastewater, e.g. From Washing Machines, Baths, Sinks, Etc. From Low-lying Parts of Buildings up to Sewer Levelcellars or Buildings Prone to Floodingdraining Wellswells For Surface Water With Inlets From Roof Gutters, Pits, Tunnels, Etc.Swimming Pools, Ponds or Fountains.The Pumps Are Suitable For Both Stationary And Portable Use. They Are For Automatic Operation. The Pumps Allow Free Passage of Particles up to Ø10 mm. The Motor Incorporates Automatic Overload Protection Cutting Out The Motor in Case of Overload. When Cooled to Normal Temperature, The Motor Restarts Automatically. Technical: Maximum Particle Size: 10 mm Materials: Pump Housing: PP 15 GF Impeller: Ppom 20 GF Installation: Pump Outlet: 1.1/4 Maximum Installation Depth: 10 m Liquid: Pumped Liquid: Any Newtonian Liquid Liquid Temperature Range: 0 .. 40 °C Density: 998.2 Kg/m3 Electrical Data: Mains Frequency: 50 Hz Rated Voltage: 1 x 220-240 V Rated Current: 1.8 A Capacitor Size - Run: 8 F/450 V Enclosure Class (Iec 34-5): Ip68 Insulation Class (Iec 85): F Length of Cable: 10 m Type of Cable Plug: Schuko

EUR 604.77
1

Grundfos Unilift Cc7-a1 380w - Pumpen - 96280968

Grundfos Unilift Cc7-a1 380w - Pumpen - 96280968

Unilift CC 7 Grundfos Unilift CC Pumpen Sind Einstufige Tauchpumpen Mit Einer Niedrigen Saugfähigkeit Bis zu Einem Wasserstand Von 3 mm. Die Pumpen Sind Für Das Abpumpen Von Regenwasser Und Grauwasser Ausgelegt, z.B. Von Waschmaschinen, Bädern, Spülen Usw. Aus Tiefer Gelegenen Teilen Von Gebäuden Bis Zur Kanalisationsebene; Kellern Oder Gebäuden, Die Anfällig Für Überschwemmungen Sind; Entwässerungsbrunnen; Brunnen Für Oberflächenwasser Mit Einlässen Aus Dachrinnen, Gruben, Tunneln Usw.; Schwimmbecken, Teichen Oder Springbrunnen. Die Pumpen Eignen Sich Sowohl Für Den Stationären Als Auch Den Mobilen Einsatz Und Arbeiten Automatisch. Sie Lassen Partikel Bis zu Ø10 mm Passieren.Der Motor Verfügt Über Einen Automatischen Überlastschutz Und Schaltet Bei Überlastung ab. Wenn er Auf Normale Temperatur Abgekühlt Ist, Startet Der Motor Automatisch Wieder.Technische Daten:Höchstpartikelgröße:10 Mmmaterialien:Pumpengehäuse:PP 15 Gfrad:Ppom 20 Gfinstallation:Pumpenauslass:1-1/4'maximale Installationshöhe:10 Mliquid:Liquid-temperaturbereich:0 .. 40 °Celektrische Daten:Nennspannung:1 x 220-240 Vnennstrom:1,8 Akondensatorgröße - Laufzeit :8 F/450 Vschutzart (Iec 34-5):Ip68isolationsklasse (Iec 85):Flänge Des Kabels:10 Mtyp Des Kabelsteckers:Schukoandere:Nettogewicht:4,6 Kgbruttogewicht:5,2 Kgversandvolumen:0,168 m3

EUR 302.52
1

Grundfos Magna3 25-40n Cirkulating Pump 180 mm - Pumpen - 97924336

Grundfos Magna3 25-40n Cirkulating Pump 180 mm - Pumpen - 97924336

Magna3 40-100 Fmagna3 - More Than a Pumpwith Its Unrivalled Efficiency, All-encompassing Range And Built-in Communication Capabilities Plus Functionalities Replacing System Components, The Magna3 is Ideal For Engineers And Specifiers Looking to Create High-performance Systems For Buildings. This Pump in The Grundfos Master Class Will Fit Both Heating And Cooling Applications Perfectly, Making it The Obvious Choice For Almost Any Building Project - Old or New.The Magna3 is of The Canned-rotor Type, i.e. Pump And Motor Form an Integral Unit Without Shaft Seal And With Only Two Gaskets For Sealing. The Bearings Are Lubricated by The Pumped Liquid.The Innovative Clamp With Only One Screw Enables Easy Repositioning of The Pump Head. The Magna3 is a Pump With no Maintenance Requirements And With Extremely Low Life Cycle Cost.The Pump is Characterised by The Following: Controller Integrated in The Control Box Control Panel With Tft Display on The Control Box Control Box Prepared For Optional Cim Modules Built-in Differential-pressure And Temperature Sensor Cast-iron Pump Housing (Depending on Model) Carbon-fibre-reinforced Composite Rotor Can Stainless-steel Bearing Plate And Rotor Cladding Aluminium Alloy Stator Housing Air-cooled Power Electronicsthe Magna3 is a Single-phase Pump.Characteristic Features Autoadapt. Flowadapt And Flowlimit (More Than a Pump Function as it Reduces The Need For Pump Throttling Valves). Proportional-pressure Control. Constant-pressure Control. Constant-temperature Control. Constant-curve Duty. Max. or Min. Curve Duty. Automatic Night Setback. No External Motor Protection Required. Insulating Shells Supplied With Single-head Pumps For Heating Systems. Large Temperature Range Where The Liquid Temperature And The Ambient Temperature Are Independent of Each Other.Communicationthe Magna3 Enables Communication Via The Following: Wireless Grundfos GO Remot

EUR 2019.01
1

Grundfos Magna3 25-60 Cirkulating Pump 180 mm - Pumpen - 97924245

Grundfos Magna3 25-60 Cirkulating Pump 180 mm - Pumpen - 97924245

Magna3 40-100 Fmagna3 - More Than a Pumpwith Its Unrivalled Efficiency, All-encompassing Range And Built-in Communication Capabilities Plus Functionalities Replacing System Components, The Magna3 is Ideal For Engineers And Specifiers Looking to Create High-performance Systems For Buildings. This Pump in The Grundfos Master Class Will Fit Both Heating And Cooling Applications Perfectly, Making it The Obvious Choice For Almost Any Building Project - Old or New.The Magna3 is of The Canned-rotor Type, i.e. Pump And Motor Form an Integral Unit Without Shaft Seal And With Only Two Gaskets For Sealing. The Bearings Are Lubricated by The Pumped Liquid.The Innovative Clamp With Only One Screw Enables Easy Repositioning of The Pump Head. The Magna3 is a Pump With no Maintenance Requirements And With Extremely Low Life Cycle Cost.The Pump is Characterised by The Following: Controller Integrated in The Control Box Control Panel With Tft Display on The Control Box Control Box Prepared For Optional Cim Modules Built-in Differential-pressure And Temperature Sensor Cast-iron Pump Housing (Depending on Model) Carbon-fibre-reinforced Composite Rotor Can Stainless-steel Bearing Plate And Rotor Cladding Aluminium Alloy Stator Housing Air-cooled Power Electronicsthe Magna3 is a Single-phase Pump.Characteristic Features Autoadapt. Flowadapt And Flowlimit (More Than a Pump Function as it Reduces The Need For Pump Throttling Valves). Proportional-pressure Control. Constant-pressure Control. Constant-temperature Control. Constant-curve Duty. Max. or Min. Curve Duty. Automatic Night Setback. No External Motor Protection Required. Insulating Shells Supplied With Single-head Pumps For Heating Systems. Large Temperature Range Where The Liquid Temperature And The Ambient Temperature Are Independent of Each Other.Communicationthe Magna3 Enables Communication Via The Following: Wireless Grundfos GO Remot

EUR 756.41
1

Grundfos Magna3 32-120 f 220 1x230v Pn6/10 - Pumpen - 97924259

Grundfos Magna3 32-120 f 220 1x230v Pn6/10 - Pumpen - 97924259

Magna3 32-120 Fmagna3 - More Than a Pumpwith Its Unrivalled Efficiency, All-encompassing Range And Built-in Communication Capabilities Plus Functionalities Replacing System Components, The Magna3 is Ideal For Engineers And Specifiers Looking to Create High-performance Systems For Buildings. This Pump in The Grundfos Master Class Will Fit Both Heating And Cooling Applications Perfectly, Making it The Obvious Choice For Almost Any Building Project - Old or New.The Magna3 is of The Canned-rotor Type, i.e. Pump And Motor Form an Integral Unit Without Shaft Seal And With Only Two Gaskets For Sealing. The Bearings Are Lubricated by The Pumped Liquid.The Innovative Clamp With Only One Screw Enables Easy Repositioning of The Pump Head. The Magna3 is a Pump With no Maintenance Requirements And With Extremely Low Life Cycle Cost.The Pump is Characterised by The Following: Controller Integrated in The Control Box Control Panel With Tft Display on The Control Box Control Box Prepared For Optional Cim Modules Built-in Differential-pressure And Temperature Sensor Cast-iron Pump Housing (Depending on Model) Carbon-fibre-reinforced Composite Rotor Can Stainless-steel Bearing Plate And Rotor Cladding Aluminium Alloy Stator Housing Air-cooled Power Electronicsthe Magna3 is a Single-phase Pump.Characteristic Features Autoadapt. Flowadapt And Flowlimit (More Than a Pump Function as it Reduces The Need For Pump Throttling Valves). Proportional-pressure Control. Constant-pressure Control. Constant-temperature Control. Constant-curve Duty. Max. or Min. Curve Duty. Automatic Night Setback. No External Motor Protection Required. Insulating Shells Supplied With Single-head Pumps For Heating Systems. Large Temperature Range Where The Liquid Temperature And The Ambient Temperature Are Independent of Each Other.Communicationthe Magna3 Enables Communication Via The Following: Wireless Grundfos GO Remot

EUR 1906.04
1

Grundfos Magna3 25-100 Cirkulating Pump 180 mm - Pumpen - 97924247

Grundfos Magna3 25-100 Cirkulating Pump 180 mm - Pumpen - 97924247

Magna3 40-100 Fmagna3 - More Than a Pumpwith Its Unrivalled Efficiency, All-encompassing Range And Built-in Communication Capabilities Plus Functionalities Replacing System Components, The Magna3 is Ideal For Engineers And Specifiers Looking to Create High-performance Systems For Buildings. This Pump in The Grundfos Master Class Will Fit Both Heating And Cooling Applications Perfectly, Making it The Obvious Choice For Almost Any Building Project - Old or New.The Magna3 is of The Canned-rotor Type, i.e. Pump And Motor Form an Integral Unit Without Shaft Seal And With Only Two Gaskets For Sealing. The Bearings Are Lubricated by The Pumped Liquid.The Innovative Clamp With Only One Screw Enables Easy Repositioning of The Pump Head. The Magna3 is a Pump With no Maintenance Requirements And With Extremely Low Life Cycle Cost.The Pump is Characterised by The Following: Controller Integrated in The Control Box Control Panel With Tft Display on The Control Box Control Box Prepared For Optional Cim Modules Built-in Differential-pressure And Temperature Sensor Cast-iron Pump Housing (Depending on Model) Carbon-fibre-reinforced Composite Rotor Can Stainless-steel Bearing Plate And Rotor Cladding Aluminium Alloy Stator Housing Air-cooled Power Electronicsthe Magna3 is a Single-phase Pump.Characteristic Features Autoadapt. Flowadapt And Flowlimit (More Than a Pump Function as it Reduces The Need For Pump Throttling Valves). Proportional-pressure Control. Constant-pressure Control. Constant-temperature Control. Constant-curve Duty. Max. or Min. Curve Duty. Automatic Night Setback. No External Motor Protection Required. Insulating Shells Supplied With Single-head Pumps For Heating Systems. Large Temperature Range Where The Liquid Temperature And The Ambient Temperature Are Independent of Each Other.Communicationthe Magna3 Enables Communication Via The Following: Wireless Grundfos GO Remot

EUR 1050.67
1

Grundfos Magna3 40-120 f 250 1x230v Pn6/10 - Pumpen - 97924270

Grundfos Magna3 40-120 f 250 1x230v Pn6/10 - Pumpen - 97924270

Magna3 40-120 Fmagna3 - More Than a Pumpwith Its Unrivalled Efficiency, All-encompassing Range And Built-in Communication Capabilities Plus Functionalities Replacing System Components, The Magna3 is Ideal For Engineers And Specifiers Looking to Create High-performance Systems For Buildings. This Pump in The Grundfos Master Class Will Fit Both Heating And Cooling Applications Perfectly, Making it The Obvious Choice For Almost Any Building Project - Old or New.The Magna3 is of The Canned-rotor Type, i.e. Pump And Motor Form an Integral Unit Without Shaft Seal And With Only Two Gaskets For Sealing. The Bearings Are Lubricated by The Pumped Liquid.The Innovative Clamp With Only One Screw Enables Easy Repositioning of The Pump Head. The Magna3 is a Pump With no Maintenance Requirements And With Extremely Low Life Cycle Cost.The Pump is Characterised by The Following: Controller Integrated in The Control Box Control Panel With Tft Display on The Control Box Control Box Prepared For Optional Cim Modules Built-in Differential-pressure And Temperature Sensor Cast-iron Pump Housing (Depending on Model) Carbon-fibre-reinforced Composite Rotor Can Stainless-steel Bearing Plate And Rotor Cladding Aluminium Alloy Stator Housing Air-cooled Power Electronicsthe Magna3 is a Single-phase Pump.Characteristic Features Autoadapt. Flowadapt And Flowlimit (More Than a Pump Function as it Reduces The Need For Pump Throttling Valves). Proportional-pressure Control. Constant-pressure Control. Constant-temperature Control. Constant-curve Duty. Max. or Min. Curve Duty. Automatic Night Setback. No External Motor Protection Required. Insulating Shells Supplied With Single-head Pumps For Heating Systems. Large Temperature Range Where The Liquid Temperature And The Ambient Temperature Are Independent of Each Other.Communicationthe Magna3 Enables Communication Via The Following: Wireless Grundfos GO Remot

EUR 2403.57
1

Grundfos Magna3 32-100 Cirkulating Pump 180 mm - Pumpen - 97924257

Grundfos Magna3 32-100 Cirkulating Pump 180 mm - Pumpen - 97924257

Magna3 40-100 Fmagna3 - More Than a Pumpwith Its Unrivalled Efficiency, All-encompassing Range And Built-in Communication Capabilities Plus Functionalities Replacing System Components, The Magna3 is Ideal For Engineers And Specifiers Looking to Create High-performance Systems For Buildings. This Pump in The Grundfos Master Class Will Fit Both Heating And Cooling Applications Perfectly, Making it The Obvious Choice For Almost Any Building Project - Old or New.The Magna3 is of The Canned-rotor Type, i.e. Pump And Motor Form an Integral Unit Without Shaft Seal And With Only Two Gaskets For Sealing. The Bearings Are Lubricated by The Pumped Liquid.The Innovative Clamp With Only One Screw Enables Easy Repositioning of The Pump Head. The Magna3 is a Pump With no Maintenance Requirements And With Extremely Low Life Cycle Cost.The Pump is Characterised by The Following: Controller Integrated in The Control Box Control Panel With Tft Display on The Control Box Control Box Prepared For Optional Cim Modules Built-in Differential-pressure And Temperature Sensor Cast-iron Pump Housing (Depending on Model) Carbon-fibre-reinforced Composite Rotor Can Stainless-steel Bearing Plate And Rotor Cladding Aluminium Alloy Stator Housing Air-cooled Power Electronicsthe Magna3 is a Single-phase Pump.Characteristic Features Autoadapt. Flowadapt And Flowlimit (More Than a Pump Function as it Reduces The Need For Pump Throttling Valves). Proportional-pressure Control. Constant-pressure Control. Constant-temperature Control. Constant-curve Duty. Max. or Min. Curve Duty. Automatic Night Setback. No External Motor Protection Required. Insulating Shells Supplied With Single-head Pumps For Heating Systems. Large Temperature Range Where The Liquid Temperature And The Ambient Temperature Are Independent of Each Other.Communicationthe Magna3 Enables Communication Via The Following: Wireless Grundfos GO Remot

EUR 1087.78
1

Grundfos Magna3 65-60 f 340 1x230v Pn6/10 - Pumpen - 97924295

Grundfos Magna3 65-60 f 340 1x230v Pn6/10 - Pumpen - 97924295

Magna3 65-60 Fmagna3 - More Than a Pumpwith Its Unrivalled Efficiency, All-encompassing Range And Built-in Communication Capabilities Plus Functionalities Replacing System Components, The Magna3 is Ideal For Engineers And Specifiers Looking to Create High-performance Systems For Buildings. This Pump in The Grundfos Master Class Will Fit Both Heating And Cooling Applications Perfectly, Making it The Obvious Choice For Almost Any Building Project - Old or New.The Magna3 is of The Canned-rotor Type, i.e. Pump And Motor Form an Integral Unit Without Shaft Seal And With Only Two Gaskets For Sealing. The Bearings Are Lubricated by The Pumped Liquid.The Innovative Clamp With Only One Screw Enables Easy Repositioning of The Pump Head. The Magna3 is a Pump With no Maintenance Requirements And With Extremely Low Life Cycle Cost.The Pump is Characterised by The Following: Controller Integrated in The Control Box Control Panel With Tft Display on The Control Box Control Box Prepared For Optional Cim Modules Built-in Differential-pressure And Temperature Sensor Cast-iron Pump Housing (Depending on Model) Carbon-fibre-reinforced Composite Rotor Can Stainless-steel Bearing Plate And Rotor Cladding Aluminium Alloy Stator Housing Air-cooled Power Electronicsthe Magna3 is a Single-phase Pump.Characteristic Features Autoadapt. Flowadapt And Flowlimit (More Than a Pump Function as it Reduces The Need For Pump Throttling Valves). Proportional-pressure Control. Constant-pressure Control. Constant-temperature Control. Constant-curve Duty. Max. or Min. Curve Duty. Automatic Night Setback. No External Motor Protection Required. Insulating Shells Supplied With Single-head Pumps For Heating Systems. Large Temperature Range Where The Liquid Temperature And The Ambient Temperature Are Independent of Each Other.Communicationthe Magna3 Enables Communication Via The Following: Wireless Grundfos GO Remote

EUR 4014.27
1

Grundfos Magna3 32-60 Cirkulating Pump 180 mm - Pumpen - 97924255

Grundfos Magna3 32-60 Cirkulating Pump 180 mm - Pumpen - 97924255

Magna3 40-100 Fmagna3 - More Than a Pumpwith Its Unrivalled Efficiency, All-encompassing Range And Built-in Communication Capabilities Plus Functionalities Replacing System Components, The Magna3 is Ideal For Engineers And Specifiers Looking to Create High-performance Systems For Buildings. This Pump in The Grundfos Master Class Will Fit Both Heating And Cooling Applications Perfectly, Making it The Obvious Choice For Almost Any Building Project - Old or New.The Magna3 is of The Canned-rotor Type, i.e. Pump And Motor Form an Integral Unit Without Shaft Seal And With Only Two Gaskets For Sealing. The Bearings Are Lubricated by The Pumped Liquid.The Innovative Clamp With Only One Screw Enables Easy Repositioning of The Pump Head. The Magna3 is a Pump With no Maintenance Requirements And With Extremely Low Life Cycle Cost.The Pump is Characterised by The Following: Controller Integrated in The Control Box Control Panel With Tft Display on The Control Box Control Box Prepared For Optional Cim Modules Built-in Differential-pressure And Temperature Sensor Cast-iron Pump Housing (Depending on Model) Carbon-fibre-reinforced Composite Rotor Can Stainless-steel Bearing Plate And Rotor Cladding Aluminium Alloy Stator Housing Air-cooled Power Electronicsthe Magna3 is a Single-phase Pump.Characteristic Features Autoadapt. Flowadapt And Flowlimit (More Than a Pump Function as it Reduces The Need For Pump Throttling Valves). Proportional-pressure Control. Constant-pressure Control. Constant-temperature Control. Constant-curve Duty. Max. or Min. Curve Duty. Automatic Night Setback. No External Motor Protection Required. Insulating Shells Supplied With Single-head Pumps For Heating Systems. Large Temperature Range Where The Liquid Temperature And The Ambient Temperature Are Independent of Each Other.Communicationthe Magna3 Enables Communication Via The Following: Wireless Grundfos GO Remot

EUR 1044.34
1

Grundfos Magna3 65-120 f 340 1x230v Pn6/10 - Pumpen - 97924298

Grundfos Magna3 65-120 f 340 1x230v Pn6/10 - Pumpen - 97924298

Magna3 65-120 Fmagna3 - More Than a Pumpwith Its Unrivalled Efficiency, All-encompassing Range And Built-in Communication Capabilities Plus Functionalities Replacing System Components, The Magna3 is Ideal For Engineers And Specifiers Looking to Create High-performance Systems For Buildings. This Pump in The Grundfos Master Class Will Fit Both Heating And Cooling Applications Perfectly, Making it The Obvious Choice For Almost Any Building Project - Old or New.The Magna3 is of The Canned-rotor Type, i.e. Pump And Motor Form an Integral Unit Without Shaft Seal And With Only Two Gaskets For Sealing. The Bearings Are Lubricated by The Pumped Liquid.The Innovative Clamp With Only One Screw Enables Easy Repositioning of The Pump Head. The Magna3 is a Pump With no Maintenance Requirements And With Extremely Low Life Cycle Cost.The Pump is Characterised by The Following: Controller Integrated in The Control Box Control Panel With Tft Display on The Control Box Control Box Prepared For Optional Cim Modules Built-in Differential-pressure And Temperature Sensor Cast-iron Pump Housing (Depending on Model) Carbon-fibre-reinforced Composite Rotor Can Stainless-steel Bearing Plate And Rotor Cladding Aluminium Alloy Stator Housing Air-cooled Power Electronicsthe Magna3 is a Single-phase Pump.Characteristic Features Autoadapt. Flowadapt And Flowlimit (More Than a Pump Function as it Reduces The Need For Pump Throttling Valves). Proportional-pressure Control. Constant-pressure Control. Constant-temperature Control. Constant-curve Duty. Max. or Min. Curve Duty. Automatic Night Setback. No External Motor Protection Required. Insulating Shells Supplied With Single-head Pumps For Heating Systems. Large Temperature Range Where The Liquid Temperature And The Ambient Temperature Are Independent of Each Other.Communicationthe Magna3 Enables Communication Via The Following: Wireless Grundfos GO Remot

EUR 3863.18
1

Grundfos Magna3 25-40 Cirkulating Pump 180 mm - Pumpen - 97924244

Grundfos Magna3 25-40 Cirkulating Pump 180 mm - Pumpen - 97924244

Magna3 40-100 Fmagna3 - More Than a Pumpwith Its Unrivalled Efficiency, All-encompassing Range And Built-in Communication Capabilities Plus Functionalities Replacing System Components, The Magna3 is Ideal For Engineers And Specifiers Looking to Create High-performance Systems For Buildings. This Pump in The Grundfos Master Class Will Fit Both Heating And Cooling Applications Perfectly, Making it The Obvious Choice For Almost Any Building Project - Old or New.The Magna3 is of The Canned-rotor Type, i.e. Pump And Motor Form an Integral Unit Without Shaft Seal And With Only Two Gaskets For Sealing. The Bearings Are Lubricated by The Pumped Liquid.The Innovative Clamp With Only One Screw Enables Easy Repositioning of The Pump Head. The Magna3 is a Pump With no Maintenance Requirements And With Extremely Low Life Cycle Cost.The Pump is Characterised by The Following: Controller Integrated in The Control Box Control Panel With Tft Display on The Control Box Control Box Prepared For Optional Cim Modules Built-in Differential-pressure And Temperature Sensor Cast-iron Pump Housing (Depending on Model) Carbon-fibre-reinforced Composite Rotor Can Stainless-steel Bearing Plate And Rotor Cladding Aluminium Alloy Stator Housing Air-cooled Power Electronicsthe Magna3 is a Single-phase Pump.Characteristic Features Autoadapt. Flowadapt And Flowlimit (More Than a Pump Function as it Reduces The Need For Pump Throttling Valves). Proportional-pressure Control. Constant-pressure Control. Constant-temperature Control. Constant-curve Duty. Max. or Min. Curve Duty. Automatic Night Setback. No External Motor Protection Required. Insulating Shells Supplied With Single-head Pumps For Heating Systems. Large Temperature Range Where The Liquid Temperature And The Ambient Temperature Are Independent of Each Other.Communicationthe Magna3 Enables Communication Via The Following: Wireless Grundfos GO Remot

EUR 781.79
1

Grundfos Magna3 50-120 f 280 1x230v Pn6/10 - Pumpen - 97924284

Grundfos Magna3 50-120 f 280 1x230v Pn6/10 - Pumpen - 97924284

Magna3 50-120 Fmagna3 - More Than a Pumpwith Its Unrivalled Efficiency, All-encompassing Range And Built-in Communication Capabilities Plus Functionalities Replacing System Components, The Magna3 is Ideal For Engineers And Specifiers Looking to Create High-performance Systems For Buildings. This Pump in The Grundfos Master Class Will Fit Both Heating And Cooling Applications Perfectly, Making it The Obvious Choice For Almost Any Building Project - Old or New.The Magna3 is of The Canned-rotor Type, i.e. Pump And Motor Form an Integral Unit Without Shaft Seal And With Only Two Gaskets For Sealing. The Bearings Are Lubricated by The Pumped Liquid.The Innovative Clamp With Only One Screw Enables Easy Repositioning of The Pump Head. The Magna3 is a Pump With no Maintenance Requirements And With Extremely Low Life Cycle Cost.The Pump is Characterised by The Following: Controller Integrated in The Control Box Control Panel With Tft Display on The Control Box Control Box Prepared For Optional Cim Modules Built-in Differential-pressure And Temperature Sensor Cast-iron Pump Housing (Depending on Model) Carbon-fibre-reinforced Composite Rotor Can Stainless-steel Bearing Plate And Rotor Cladding Aluminium Alloy Stator Housing Air-cooled Power Electronicsthe Magna3 is a Single-phase Pump.Characteristic Features Autoadapt. Flowadapt And Flowlimit (More Than a Pump Function as it Reduces The Need For Pump Throttling Valves). Proportional-pressure Control. Constant-pressure Control. Constant-temperature Control. Constant-curve Duty. Max. or Min. Curve Duty. Automatic Night Setback. No External Motor Protection Required. Insulating Shells Supplied With Single-head Pumps For Heating Systems. Large Temperature Range Where The Liquid Temperature And The Ambient Temperature Are Independent of Each Other.Communicationthe Magna3 Enables Communication Via The Following: Wireless Grundfos GO Remot

EUR 3171.35
1

Grundfos Magna3 32-80f Cirkulating Pump 220 mm - Pumpen - 98333874

Grundfos Magna3 32-80f Cirkulating Pump 220 mm - Pumpen - 98333874

Magna3 40-100 Fmagna3 - More Than a Pumpwith Its Unrivalled Efficiency, All-encompassing Range And Built-in Communication Capabilities Plus Functionalities Replacing System Components, The Magna3 is Ideal For Engineers And Specifiers Looking to Create High-performance Systems For Buildings. This Pump in The Grundfos Master Class Will Fit Both Heating And Cooling Applications Perfectly, Making it The Obvious Choice For Almost Any Building Project - Old or New.The Magna3 is of The Canned-rotor Type, i.e. Pump And Motor Form an Integral Unit Without Shaft Seal And With Only Two Gaskets For Sealing. The Bearings Are Lubricated by The Pumped Liquid.The Innovative Clamp With Only One Screw Enables Easy Repositioning of The Pump Head. The Magna3 is a Pump With no Maintenance Requirements And With Extremely Low Life Cycle Cost.The Pump is Characterised by The Following: Controller Integrated in The Control Box Control Panel With Tft Display on The Control Box Control Box Prepared For Optional Cim Modules Built-in Differential-pressure And Temperature Sensor Cast-iron Pump Housing (Depending on Model) Carbon-fibre-reinforced Composite Rotor Can Stainless-steel Bearing Plate And Rotor Cladding Aluminium Alloy Stator Housing Air-cooled Power Electronicsthe Magna3 is a Single-phase Pump.Characteristic Features Autoadapt. Flowadapt And Flowlimit (More Than a Pump Function as it Reduces The Need For Pump Throttling Valves). Proportional-pressure Control. Constant-pressure Control. Constant-temperature Control. Constant-curve Duty. Max. or Min. Curve Duty. Automatic Night Setback. No External Motor Protection Required. Insulating Shells Supplied With Single-head Pumps For Heating Systems. Large Temperature Range Where The Liquid Temperature And The Ambient Temperature Are Independent of Each Other.Communicationthe Magna3 Enables Communication Via The Following: Wireless Grundfos GO Remot

EUR 1250.82
1

Grundfos Magna3 65-150 f 340 1x230v Pn6/10 - Pumpen - 97924299

Grundfos Magna3 65-150 f 340 1x230v Pn6/10 - Pumpen - 97924299

Magna3 65-150 Fmagna3 - More Than a Pumpwith Its Unrivalled Efficiency, All-encompassing Range And Built-in Communication Capabilities Plus Functionalities Replacing System Components, The Magna3 is Ideal For Engineers And Specifiers Looking to Create High-performance Systems For Buildings. This Pump in The Grundfos Master Class Will Fit Both Heating And Cooling Applications Perfectly, Making it The Obvious Choice For Almost Any Building Project - Old or New.The Magna3 is of The Canned-rotor Type, i.e. Pump And Motor Form an Integral Unit Without Shaft Seal And With Only Two Gaskets For Sealing. The Bearings Are Lubricated by The Pumped Liquid.The Innovative Clamp With Only One Screw Enables Easy Repositioning of The Pump Head. The Magna3 is a Pump With no Maintenance Requirements And With Extremely Low Life Cycle Cost.The Pump is Characterised by The Following: Controller Integrated in The Control Box Control Panel With Tft Display on The Control Box Control Box Prepared For Optional Cim Modules Built-in Differential-pressure And Temperature Sensor Cast-iron Pump Housing (Depending on Model) Carbon-fibre-reinforced Composite Rotor Can Stainless-steel Bearing Plate And Rotor Cladding Aluminium Alloy Stator Housing Air-cooled Power Electronicsthe Magna3 is a Single-phase Pump.Characteristic Features Autoadapt. Flowadapt And Flowlimit (More Than a Pump Function as it Reduces The Need For Pump Throttling Valves). Proportional-pressure Control. Constant-pressure Control. Constant-temperature Control. Constant-curve Duty. Max. or Min. Curve Duty. Automatic Night Setback. No External Motor Protection Required. Insulating Shells Supplied With Single-head Pumps For Heating Systems. Large Temperature Range Where The Liquid Temperature And The Ambient Temperature Are Independent of Each Other.Communicationthe Magna3 Enables Communication Via The Following: Wireless Grundfos GO Remot

EUR 4496.40
1

Grundfos Magna3 50-60 f 240 1x230v Pn6/10 - Pumpen - 97924281

Grundfos Magna3 50-60 f 240 1x230v Pn6/10 - Pumpen - 97924281

Magna3 50-60 Fmagna3 - More Than a Pumpwith Its Unrivalled Efficiency, All-encompassing Range And Built-in Communication Capabilities Plus Functionalities Replacing System Components, The Magna3 is Ideal For Engineers And Specifiers Looking to Create High-performance Systems For Buildings. This Pump in The Grundfos Master Class Will Fit Both Heating And Cooling Applications Perfectly, Making it The Obvious Choice For Almost Any Building Project - Old or New.The Magna3 is of The Canned-rotor Type, i.e. Pump And Motor Form an Integral Unit Without Shaft Seal And With Only Two Gaskets For Sealing. The Bearings Are Lubricated by The Pumped Liquid.The Innovative Clamp With Only One Screw Enables Easy Repositioning of The Pump Head. The Magna3 is a Pump With no Maintenance Requirements And With Extremely Low Life Cycle Cost.The Pump is Characterised by The Following: Controller Integrated in The Control Box Control Panel With Tft Display on The Control Box Control Box Prepared For Optional Cim Modules Built-in Differential-pressure And Temperature Sensor Cast-iron Pump Housing (Depending on Model) Carbon-fibre-reinforced Composite Rotor Can Stainless-steel Bearing Plate And Rotor Cladding Aluminium Alloy Stator Housing Air-cooled Power Electronicsthe Magna3 is a Single-phase Pump.Characteristic Features Autoadapt. Flowadapt And Flowlimit (More Than a Pump Function as it Reduces The Need For Pump Throttling Valves). Proportional-pressure Control. Constant-pressure Control. Constant-temperature Control. Constant-curve Duty. Max. or Min. Curve Duty. Automatic Night Setback. No External Motor Protection Required. Insulating Shells Supplied With Single-head Pumps For Heating Systems. Large Temperature Range Where The Liquid Temperature And The Ambient Temperature Are Independent of Each Other.Communicationthe Magna3 Enables Communication Via The Following: Wireless Grundfos GO Remote

EUR 2578.37
1

Grundfos Magna3 25-80 Cirkulating Pump 180 mm - Pumpen - 97924246

Grundfos Magna3 25-80 Cirkulating Pump 180 mm - Pumpen - 97924246

Magna3 40-100 Fmagna3 - More Than a Pumpwith Its Unrivalled Efficiency, All-encompassing Range And Built-in Communication Capabilities Plus Functionalities Replacing System Components, The Magna3 is Ideal For Engineers And Specifiers Looking to Create High-performance Systems For Buildings. This Pump in The Grundfos Master Class Will Fit Both Heating And Cooling Applications Perfectly, Making it The Obvious Choice For Almost Any Building Project - Old or New.The Magna3 is of The Canned-rotor Type, i.e. Pump And Motor Form an Integral Unit Without Shaft Seal And With Only Two Gaskets For Sealing. The Bearings Are Lubricated by The Pumped Liquid.The Innovative Clamp With Only One Screw Enables Easy Repositioning of The Pump Head. The Magna3 is a Pump With no Maintenance Requirements And With Extremely Low Life Cycle Cost.The Pump is Characterised by The Following: Controller Integrated in The Control Box Control Panel With Tft Display on The Control Box Control Box Prepared For Optional Cim Modules Built-in Differential-pressure And Temperature Sensor Cast-iron Pump Housing (Depending on Model) Carbon-fibre-reinforced Composite Rotor Can Stainless-steel Bearing Plate And Rotor Cladding Aluminium Alloy Stator Housing Air-cooled Power Electronicsthe Magna3 is a Single-phase Pump.Characteristic Features Autoadapt. Flowadapt And Flowlimit (More Than a Pump Function as it Reduces The Need For Pump Throttling Valves). Proportional-pressure Control. Constant-pressure Control. Constant-temperature Control. Constant-curve Duty. Max. or Min. Curve Duty. Automatic Night Setback. No External Motor Protection Required. Insulating Shells Supplied With Single-head Pumps For Heating Systems. Large Temperature Range Where The Liquid Temperature And The Ambient Temperature Are Independent of Each Other.Communicationthe Magna3 Enables Communication Via The Following: Wireless Grundfos GO Remot

EUR 1021.76
1