48 Ergebnisse (0,18377 Sekunden)

Marke

Farbe

Händler

Preis (EUR)

Filter zurücksetzen

Produkte
Von
Shops

Grundfos Sololift2 C-3 - Pumpen - 97775317

Grundfos Sololift2 Wc-1 - Pumpen - 97775314

Grundfos Sololift2 Wc-3 - Pumpen - 97775315

Grundfos Sololift2 D-2 - Pumpen - 97775318

Grundfos Unilift Cc5 - a1 - Pumpen - 96280966

Grundfos Unilift ap 12.40.04 a1 1x230v 10m Sch - Pumpen - 96011018

Grundfos Unilift ap 12.40.04 a1 1x230v 10m Sch - Pumpen - 96011018

Unilift Ap12.40.04.A1submersible Drainage Pump Typevertical Single-stage Stainless Steel Submersiblepump With Vertical Discharge Port And Integratedsubmersible 1-phase Totally Enclosed Motorin Insulation Class F With Thermal Overloadprotection. The Pump is Fitted With Suction Strainer And Level Switch For Automatic Start And Stop.The Impeller is a Semi Open Impeller For12 mm Free Passage Suitable For Pumpinggroundwater, Surface Water, Rain Water Andsimilar.The Pump Has a Double Shaft Seal And Anintermediate Oil Chamber Pre-filled With Non-toxicspecial Oil.The Pump Has a Riser Pipe, a Cooling Jacket For Continuous Cooling of The Motor by The Pumped Liquid And Long-life Deep-groove Greased-for-life Ball Bearings.The Pump is Ready For Use as it is Fitted Withcarrying Handle And is Supplied With A10 m Mains Cable. The Mains Cable is Ofthe Plug Type With Glass Sealing Compound in Thesocket to Prevent Penetration of Humidity Intothe Stator Windings.Liquid:Liquid Temperature Range:0 .. 55 °Ctechnical:Type of Impeller:Semi Openmaximum Particle Size:12 Mmmaterials:Pump Housing:Stainless Steelpump Housing:Din W.-Nr. 1.4301pump Housing:Aisi 304impeller:Stainless Steelimpeller:Din W.-Nr. 1.4301impeller:Aisi 304installation:Pump Outlet:Rp 1 1/2maximum Installation Depth:10 Melectrical Data:Type of Motor:Pscpower Input - P1:0.7 Kwrated Voltage:1 x 230 Vrated Current:3 Acos Phi - Power Factor:0,99rated Speed:2770 Rpmcapacitor Size - Run:12 F/400 Venclosure Class (Iec 34-5):Ip68insulation Class (Iec 85):Flength of Cable:10 Mtype of Cable Plug: Schukoothers:Net Weight:11 Kggross Weight:11.5 kg

EUR 1114.22
1

Grundfos Unilift ap 35.40.06 A1v 1x230v 10m Sch - Pumpen - 96010982

Grundfos Unilift ap 35.40.06 A1v 1x230v 10m Sch - Pumpen - 96010982

Unilift Ap35.40.06.A1.Vsubmersible Drainage Pump Typevertical Single-stage Stainless Steel Submersiblepump With Vertical Discharge Port And Integratedsubmersible 1-phase Totally Enclosed Motorin Insulation Class F With Thermal Overloadprotection. The Pump is Fitted With Suction Strainer And Level Switch For Automatic Start And Stop.The Impeller is a Vortex Impeller For35 mm Free Passage Suitable For Pumpinggroundwater, Surface Water, Rain Water Andsimilar.The Pump Has a Double Shaft Seal And Anintermediate Oil Chamber Pre-filled With Non-toxicspecial Oil.The Pump Has a Riser Pipe, a Cooling Jacket For Continuous Cooling of The Motor by The Pumped Liquid And Long-life Deep-groove Greased-for-life Ball Bearings.The Pump is Ready For Use as it is Fitted Withcarrying Handle And is Supplied With A10 m Mains Cable. The Mains Cable is Ofthe Plug Type With Glass Sealing Compound in Thesocket to Prevent Penetration of Humidity Intothe Stator Windings.Liquid:Liquid Temperature Range:0 .. 55 °Ctechnical:Type of Impeller:Vortexmaximum Particle Size:35 Mmmaterials:Pump Housing:Stainless Steelpump Housing:Din W.-Nr. 1.4301pump Housing:Aisi 304impeller:Stainless Steelimpeller:Din W.-Nr. 1.4301impeller:Aisi 304installation:Pump Outlet:Rp 1 1/2maximum Installation Depth:10 Melectrical Data:Type of Motor:Pscpower Input - P1:0.9 Kwrated Voltage:1 x 230 Vrated Current:4 Acos Phi - Power Factor:0,97rated Speed:2810 Rpmcapacitor Size - Run:16 F/400 Venclosure Class (Iec 34-5):Ip68insulation Class (Iec 85):Flength of Cable:10 Mtype of Cable Plug Schukoothers:Net Weight:11.4 Kggross Weight:11.9 kg

EUR 1173.88
1

Grundfos Unilift Kp350-a-1 1x220-240v 50hz 10m Sch - Pumpen - 013n1800

Grundfos Unilift Kp250-m-1 1x220-230v 50hz 10m Sch - Pumpen - 012h1300

Grundfos Conlift1 - Kocher Und Rauchabzug - 97936156

Grundfos Unilift ap 35b 50.06.1v 1x230v 10m Sch - Pumpen - 96004563

Grundfos Cr3-4 A-a-a-e-hqqe 3x230/400 50hz - Pumpen - 96516592

Grundfos Cr3-4 A-a-a-e-hqqe 3x230/400 50hz - Pumpen - 96516592

CR 3-4 A-a-a-e-hqqevertical, Multistage Centrifugal Pump With Suction And Discharge Ports on Same The Level (In-line) Enabling Installation in a Horizontal One-pipe System. The Pump Head And Base Are in Cast Iron - All Other Wetted Parts Are in Stainless Steel. A Cartridge Shaft Seal Ensures High Reliability, Safe Handling And Easy Service And Access. Power Transmission is Via a Split Coupling. Pipework Connection is Via Oval Flanges With Internal Rp Threads.The Pump is Fitted With a 3-phase, Fan-cooled Asynchronous Motor.{br}Liquid:Liquid Temperature Range:-20 .. 120 °Ctechnical:Speed For Pump Data:2873 Rpmrated Flow:3 M3/hrated Head:19.1 Mshaft Seal:Hqqeapprovals on Nameplate:CE,Trcurve Tolerance:Iso 9906:1999 Annex Amaterials:Pump Housing:Cast Ironpump Housing:En-jl1030pump Housing:Astm A48-30 Bimpeller:Stainless Steelimpeller:Din W.-Nr. 1.4301impeller:Aisi 304installation:Maximum Ambient Temperature:40 °Cmax Pressure at Stated Temp:16 Bar / 120 °Cmax Pressure at Stated Temp:16 Bar / -20 °Cflange Standard:Ovalpipe Connection:Rp 1flange Size For Motor:Ft85electrical Data:Motor Type:71aie Efficiency Class:Nanumber of Poles:2rated Power - P2:0.37 Kwpower (P2) Required by Pump:0.37 Kwpower (P2) Required by Pump:0.37 Kwrated Voltage:3 x 220-240 D/380-415 Y Vrated Current:1,74/1,00 Astarting Current:490-530 %Cos Phi - Power Factor:0,80-0,70rated Speed:2850-2880 Rpmefficiency:78,5%Motor Efficiency at Full Load:78,5 %Motor Efficiency at 3/4 Load:79,0-76,5 %Motor Efficiency at 1/2 Load:75,5-71,5 %Enclosure Class (Iec 34-5):55 (Protect. Water Jets/dust)Insulation Class (Iec 85):Fothers:Minimum Efficiency Index, Mei =:0.7net Weight:18.7 Kggross Weight:21.4 Kgshipping Volume:0.05 m3

EUR 1156.23
1

Grundfos 15-14bx pm - Pumpen - 97916772

Grundfos 15-14bx pm - Pumpen - 97916772

15-14 BX Pmthe High Efficiency Coomfort PM Range is a Product For Domestic Hotwater Recirculation in 1 And 2 Family Houses.The Motor is a Single-phase, 2-pole, Hysteresis, Permanent-magnet Motor in Conformity With The Emcdirective.Characteristics And Benefits:* Unique Autoadapt Saves up to 50% Heatenergy And 87% Motor Energy Compared With a Standard Pump in Continuous Operation* Flushing Function* Automatic Legionella Operation (if Supported From The System)* Automatic Weekend And Vacation Function* Temperature Control Optional* Continuous Operation Optional* Fast And Simple Electrical Installation Due to The Million Times Trusted Alpha Plug* Easy to Clean And Lime Insensitive Spheric Rotor* Application Area up 14°dH Water Hardness* Wearless Operation Due to Liquid Lubricated Bearing* No Leakage Risk Due to a Static Seal* Easy Maintenance And Cleaning by Easy-to-separated Motor Head That Fits on All Standard Circulation Pump Housings* Korrosion Resistant Pump Housing in Brass* Due to Impedance Protected Motor no Motor Protection Necessary* No Additional Installation Costs Due to Integrated Non Return And Stop Valve in The Pump Housingliquid:Liquid Temperature Range:2 .. 95 °Ctechnical:TF Class:95approvals on Nameplate:Vde,GS,Cematerials:Pump Housing:Brass MS 68impeller:Stainless Steel, Epdm, Ppo, Ptfe, Graphitinstallation:Maximum Operating Pressure:10 Barpipe Connection:G 1 1/4port-to-port Length:110 Mmelectrical Data:Max. Power Input:8 Wrated Voltage:1 x 230 Vcurrent in Speed 3:0.07 Acapacitor Size - Run:0.6 Fenclosure Class (Iec 34-5):Ip44insulation Class (Iec 85):Fothers:Net Weight:1.35 Kggross Weight:1.51 Kgshipping Volume:0.003 m3

EUR 292.26
1

Grundfos Up15-14b pm - Pumpen - 97916771

Grundfos Up15-14b pm - Pumpen - 97916771

UP 15-14 B Pmthe High Efficiency Coomfort PM Range is a Product For Domestic Hotwater Recirculation in 1 And 2 Family Houses.The Motor is a Single-phase, 2-pole, Hysteresis, Permanent-magnet Motor in Conformity With The Emcdirective.Characteristics And Benefits:* Unique Autoadapt Saves up to 50% Heatenergy And 87% Motor Energy Compared With a Standard Pump in Continuous Operation* Flushing Function* Automatic Legionella Operation (if Supported From The System)* Automatic Weekend And Vacation Function* Temperature Control Optional* Continuous Operation Optional* Fast And Simple Electrical Installation Due to The Million Times Trusted Alpha Plug* Easy to Clean And Lime Insensitive Spheric Rotor* Application Area up 14°dH Water Hardness* Wearless Operation Due to Liquid Lubricated Bearing* No Leakage Risk Due to a Static Seal* Easy Maintenance And Cleaning by Easy-to-separated Motor Head That Fits on All Standard Circulation Pump Housings* Korrosion Resistant Pump Housing in Brass* Due to Impedance Protected Motor no Motor Protection Necessary* No Additional Installation Costs Due to Integrated Non Return And Stop Valve in The Pump Housingliquid:Liquid Temperature Range:2 .. 95 °Ctechnical:TF Class:95approvals on Nameplate:Vde,GS,Cematerials:Pump Housing:Brass MS 68impeller:Stainless Steel, Epdm, Ppo, Ptfe, Graphitinstallation:Maximum Operating Pressure:10 Barpipe Connection:Rp 1/2port-to-port Length:80 Mmelectrical Data:Max. Power Input:8 Wrated Voltage:1 x 230 Vcurrent in Speed 3:0.07 Acapacitor Size - Run:0.6 Fenclosure Class (Iec 34-5):Ip44insulation Class (Iec 85):Fothers:Net Weight:1 Kggross Weight:1.12 Kgshipping Volume:0.003 m3

EUR 209.98
1

Grundfos Up15-14ba pm - Pumpen - 97916757

Grundfos Up15-14ba pm - Pumpen - 97916757

UP 15-14 BA Pmthe High Efficiency Coomfort PM Range is a Product For Domestic Hotwater Recirculation in 1 And 2 Family Houses.The Motor is a Single-phase, 2-pole, Hysteresis, Permanent-magnet Motor in Conformity With The Emcdirective.Characteristics And Benefits:* Unique Autoadapt Saves up to 50% Heatenergy And 87% Motor Energy Compared With a Standard Pump in Continuous Operation* Flushing Function* Automatic Legionella Operation (if Supported From The System)* Automatic Weekend And Vacation Function* Temperature Control Optional* Continuous Operation Optional* Fast And Simple Electrical Installation Due to The Million Times Trusted Alpha Plug* Easy to Clean And Lime Insensitive Spheric Rotor* Application Area up 14°dH Water Hardness* Wearless Operation Due to Liquid Lubricated Bearing* No Leakage Risk Due to a Static Seal* Easy Maintenance And Cleaning by Easy-to-separated Motor Head That Fits on All Standard Circulation Pump Housings* Korrosion Resistant Pump Housing in Brass* Due to Impedance Protected Motor no Motor Protection Necessary* No Additional Installation Costs Due to Integrated Non Return And Stop Valve in The Pump Housingliquid:Liquid Temperature Range:2 .. 95 °Ctechnical:TF Class:95approvals on Nameplate:Vde,GS,Cematerials:Pump Housing:Brass MS 68impeller:Stainless Steel, Epdm, Ppo, Ptfe, Graphitinstallation:Maximum Operating Pressure:10 Barpipe Connection:Rp 1/2port-to-port Length:80 Mmelectrical Data:Max. Power Input:8 Wrated Voltage:1 x 230 Vcurrent in Speed 3:0.07 Acapacitor Size - Run:0.6 Fenclosure Class (Iec 34-5):Ip44insulation Class (Iec 85):Fothers:Net Weight:1 Kggross Weight:1.12 Kgshipping Volume:0.003 m3

EUR 342.66
1

Grundfos Unilift ap 35b 50.06.3v 3x400v 5m Noplug - Pumpen - 96004565

Grundfos Unilift ap 50b 50.11.3 v 3x400v 5m no Plug - Pumpen - 96004601

Grundfos Magna3 50-120 f 280 1x230v Pn6/10 - Pumpen - 97924284

Grundfos Magna3 50-120 f 280 1x230v Pn6/10 - Pumpen - 97924284

Magna3 50-120 Fmagna3 - More Than a Pumpwith Its Unrivalled Efficiency, All-encompassing Range And Built-in Communication Capabilities Plus Functionalities Replacing System Components, The Magna3 is Ideal For Engineers And Specifiers Looking to Create High-performance Systems For Buildings. This Pump in The Grundfos Master Class Will Fit Both Heating And Cooling Applications Perfectly, Making it The Obvious Choice For Almost Any Building Project - Old or New.The Magna3 is of The Canned-rotor Type, i.e. Pump And Motor Form an Integral Unit Without Shaft Seal And With Only Two Gaskets For Sealing. The Bearings Are Lubricated by The Pumped Liquid.The Innovative Clamp With Only One Screw Enables Easy Repositioning of The Pump Head. The Magna3 is a Pump With no Maintenance Requirements And With Extremely Low Life Cycle Cost.The Pump is Characterised by The Following: Controller Integrated in The Control Box Control Panel With Tft Display on The Control Box Control Box Prepared For Optional Cim Modules Built-in Differential-pressure And Temperature Sensor Cast-iron Pump Housing (Depending on Model) Carbon-fibre-reinforced Composite Rotor Can Stainless-steel Bearing Plate And Rotor Cladding Aluminium Alloy Stator Housing Air-cooled Power Electronicsthe Magna3 is a Single-phase Pump.Characteristic Features Autoadapt. Flowadapt And Flowlimit (More Than a Pump Function as it Reduces The Need For Pump Throttling Valves). Proportional-pressure Control. Constant-pressure Control. Constant-temperature Control. Constant-curve Duty. Max. or Min. Curve Duty. Automatic Night Setback. No External Motor Protection Required. Insulating Shells Supplied With Single-head Pumps For Heating Systems. Large Temperature Range Where The Liquid Temperature And The Ambient Temperature Are Independent of Each Other.Communicationthe Magna3 Enables Communication Via The Following: Wireless Grundfos GO Remot

EUR 3171.35
1

Grundfos Magna3 25-40n Cirkulating Pump 180 mm - Pumpen - 97924336

Grundfos Magna3 25-40n Cirkulating Pump 180 mm - Pumpen - 97924336

Magna3 40-100 Fmagna3 - More Than a Pumpwith Its Unrivalled Efficiency, All-encompassing Range And Built-in Communication Capabilities Plus Functionalities Replacing System Components, The Magna3 is Ideal For Engineers And Specifiers Looking to Create High-performance Systems For Buildings. This Pump in The Grundfos Master Class Will Fit Both Heating And Cooling Applications Perfectly, Making it The Obvious Choice For Almost Any Building Project - Old or New.The Magna3 is of The Canned-rotor Type, i.e. Pump And Motor Form an Integral Unit Without Shaft Seal And With Only Two Gaskets For Sealing. The Bearings Are Lubricated by The Pumped Liquid.The Innovative Clamp With Only One Screw Enables Easy Repositioning of The Pump Head. The Magna3 is a Pump With no Maintenance Requirements And With Extremely Low Life Cycle Cost.The Pump is Characterised by The Following: Controller Integrated in The Control Box Control Panel With Tft Display on The Control Box Control Box Prepared For Optional Cim Modules Built-in Differential-pressure And Temperature Sensor Cast-iron Pump Housing (Depending on Model) Carbon-fibre-reinforced Composite Rotor Can Stainless-steel Bearing Plate And Rotor Cladding Aluminium Alloy Stator Housing Air-cooled Power Electronicsthe Magna3 is a Single-phase Pump.Characteristic Features Autoadapt. Flowadapt And Flowlimit (More Than a Pump Function as it Reduces The Need For Pump Throttling Valves). Proportional-pressure Control. Constant-pressure Control. Constant-temperature Control. Constant-curve Duty. Max. or Min. Curve Duty. Automatic Night Setback. No External Motor Protection Required. Insulating Shells Supplied With Single-head Pumps For Heating Systems. Large Temperature Range Where The Liquid Temperature And The Ambient Temperature Are Independent of Each Other.Communicationthe Magna3 Enables Communication Via The Following: Wireless Grundfos GO Remot

EUR 2019.01
1

Grundfos Magna3 65-120 f 340 1x230v Pn6/10 - Pumpen - 97924298

Grundfos Magna3 65-120 f 340 1x230v Pn6/10 - Pumpen - 97924298

Magna3 65-120 Fmagna3 - More Than a Pumpwith Its Unrivalled Efficiency, All-encompassing Range And Built-in Communication Capabilities Plus Functionalities Replacing System Components, The Magna3 is Ideal For Engineers And Specifiers Looking to Create High-performance Systems For Buildings. This Pump in The Grundfos Master Class Will Fit Both Heating And Cooling Applications Perfectly, Making it The Obvious Choice For Almost Any Building Project - Old or New.The Magna3 is of The Canned-rotor Type, i.e. Pump And Motor Form an Integral Unit Without Shaft Seal And With Only Two Gaskets For Sealing. The Bearings Are Lubricated by The Pumped Liquid.The Innovative Clamp With Only One Screw Enables Easy Repositioning of The Pump Head. The Magna3 is a Pump With no Maintenance Requirements And With Extremely Low Life Cycle Cost.The Pump is Characterised by The Following: Controller Integrated in The Control Box Control Panel With Tft Display on The Control Box Control Box Prepared For Optional Cim Modules Built-in Differential-pressure And Temperature Sensor Cast-iron Pump Housing (Depending on Model) Carbon-fibre-reinforced Composite Rotor Can Stainless-steel Bearing Plate And Rotor Cladding Aluminium Alloy Stator Housing Air-cooled Power Electronicsthe Magna3 is a Single-phase Pump.Characteristic Features Autoadapt. Flowadapt And Flowlimit (More Than a Pump Function as it Reduces The Need For Pump Throttling Valves). Proportional-pressure Control. Constant-pressure Control. Constant-temperature Control. Constant-curve Duty. Max. or Min. Curve Duty. Automatic Night Setback. No External Motor Protection Required. Insulating Shells Supplied With Single-head Pumps For Heating Systems. Large Temperature Range Where The Liquid Temperature And The Ambient Temperature Are Independent of Each Other.Communicationthe Magna3 Enables Communication Via The Following: Wireless Grundfos GO Remot

EUR 3863.18
1

Grundfos Magna3 25-40 Cirkulating Pump 180 mm - Pumpen - 97924244

Grundfos Magna3 25-40 Cirkulating Pump 180 mm - Pumpen - 97924244

Magna3 40-100 Fmagna3 - More Than a Pumpwith Its Unrivalled Efficiency, All-encompassing Range And Built-in Communication Capabilities Plus Functionalities Replacing System Components, The Magna3 is Ideal For Engineers And Specifiers Looking to Create High-performance Systems For Buildings. This Pump in The Grundfos Master Class Will Fit Both Heating And Cooling Applications Perfectly, Making it The Obvious Choice For Almost Any Building Project - Old or New.The Magna3 is of The Canned-rotor Type, i.e. Pump And Motor Form an Integral Unit Without Shaft Seal And With Only Two Gaskets For Sealing. The Bearings Are Lubricated by The Pumped Liquid.The Innovative Clamp With Only One Screw Enables Easy Repositioning of The Pump Head. The Magna3 is a Pump With no Maintenance Requirements And With Extremely Low Life Cycle Cost.The Pump is Characterised by The Following: Controller Integrated in The Control Box Control Panel With Tft Display on The Control Box Control Box Prepared For Optional Cim Modules Built-in Differential-pressure And Temperature Sensor Cast-iron Pump Housing (Depending on Model) Carbon-fibre-reinforced Composite Rotor Can Stainless-steel Bearing Plate And Rotor Cladding Aluminium Alloy Stator Housing Air-cooled Power Electronicsthe Magna3 is a Single-phase Pump.Characteristic Features Autoadapt. Flowadapt And Flowlimit (More Than a Pump Function as it Reduces The Need For Pump Throttling Valves). Proportional-pressure Control. Constant-pressure Control. Constant-temperature Control. Constant-curve Duty. Max. or Min. Curve Duty. Automatic Night Setback. No External Motor Protection Required. Insulating Shells Supplied With Single-head Pumps For Heating Systems. Large Temperature Range Where The Liquid Temperature And The Ambient Temperature Are Independent of Each Other.Communicationthe Magna3 Enables Communication Via The Following: Wireless Grundfos GO Remot

EUR 781.79
1

Grundfos Magna3 25-80 Cirkulating Pump 180 mm - Pumpen - 97924246

Grundfos Magna3 25-80 Cirkulating Pump 180 mm - Pumpen - 97924246

Magna3 40-100 Fmagna3 - More Than a Pumpwith Its Unrivalled Efficiency, All-encompassing Range And Built-in Communication Capabilities Plus Functionalities Replacing System Components, The Magna3 is Ideal For Engineers And Specifiers Looking to Create High-performance Systems For Buildings. This Pump in The Grundfos Master Class Will Fit Both Heating And Cooling Applications Perfectly, Making it The Obvious Choice For Almost Any Building Project - Old or New.The Magna3 is of The Canned-rotor Type, i.e. Pump And Motor Form an Integral Unit Without Shaft Seal And With Only Two Gaskets For Sealing. The Bearings Are Lubricated by The Pumped Liquid.The Innovative Clamp With Only One Screw Enables Easy Repositioning of The Pump Head. The Magna3 is a Pump With no Maintenance Requirements And With Extremely Low Life Cycle Cost.The Pump is Characterised by The Following: Controller Integrated in The Control Box Control Panel With Tft Display on The Control Box Control Box Prepared For Optional Cim Modules Built-in Differential-pressure And Temperature Sensor Cast-iron Pump Housing (Depending on Model) Carbon-fibre-reinforced Composite Rotor Can Stainless-steel Bearing Plate And Rotor Cladding Aluminium Alloy Stator Housing Air-cooled Power Electronicsthe Magna3 is a Single-phase Pump.Characteristic Features Autoadapt. Flowadapt And Flowlimit (More Than a Pump Function as it Reduces The Need For Pump Throttling Valves). Proportional-pressure Control. Constant-pressure Control. Constant-temperature Control. Constant-curve Duty. Max. or Min. Curve Duty. Automatic Night Setback. No External Motor Protection Required. Insulating Shells Supplied With Single-head Pumps For Heating Systems. Large Temperature Range Where The Liquid Temperature And The Ambient Temperature Are Independent of Each Other.Communicationthe Magna3 Enables Communication Via The Following: Wireless Grundfos GO Remot

EUR 1021.76
1

Grundfos Magna3 32-120 f 220 1x230v Pn6/10 - Pumpen - 97924259

Grundfos Magna3 32-120 f 220 1x230v Pn6/10 - Pumpen - 97924259

Magna3 32-120 Fmagna3 - More Than a Pumpwith Its Unrivalled Efficiency, All-encompassing Range And Built-in Communication Capabilities Plus Functionalities Replacing System Components, The Magna3 is Ideal For Engineers And Specifiers Looking to Create High-performance Systems For Buildings. This Pump in The Grundfos Master Class Will Fit Both Heating And Cooling Applications Perfectly, Making it The Obvious Choice For Almost Any Building Project - Old or New.The Magna3 is of The Canned-rotor Type, i.e. Pump And Motor Form an Integral Unit Without Shaft Seal And With Only Two Gaskets For Sealing. The Bearings Are Lubricated by The Pumped Liquid.The Innovative Clamp With Only One Screw Enables Easy Repositioning of The Pump Head. The Magna3 is a Pump With no Maintenance Requirements And With Extremely Low Life Cycle Cost.The Pump is Characterised by The Following: Controller Integrated in The Control Box Control Panel With Tft Display on The Control Box Control Box Prepared For Optional Cim Modules Built-in Differential-pressure And Temperature Sensor Cast-iron Pump Housing (Depending on Model) Carbon-fibre-reinforced Composite Rotor Can Stainless-steel Bearing Plate And Rotor Cladding Aluminium Alloy Stator Housing Air-cooled Power Electronicsthe Magna3 is a Single-phase Pump.Characteristic Features Autoadapt. Flowadapt And Flowlimit (More Than a Pump Function as it Reduces The Need For Pump Throttling Valves). Proportional-pressure Control. Constant-pressure Control. Constant-temperature Control. Constant-curve Duty. Max. or Min. Curve Duty. Automatic Night Setback. No External Motor Protection Required. Insulating Shells Supplied With Single-head Pumps For Heating Systems. Large Temperature Range Where The Liquid Temperature And The Ambient Temperature Are Independent of Each Other.Communicationthe Magna3 Enables Communication Via The Following: Wireless Grundfos GO Remot

EUR 1906.04
1